Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHILOSOPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Use of three-dimensional photoelasticity in fracture mechanics

The philosophy of fracture mechanics is reviewed and utilized to formulate a simplified approach to the determination of the stress-intensity factor photoelastically for three-dimensional problems. The method involves a Taylor Series correction for the maximum in-plane shear stress (TSCM) and does not involve stress separation. The results are illustrated by applying the TSCM to surface flaws in bending fields. Other three-dimensional problems solved by the TSCM are cited.

Smith, C. W.↗
NASA NTRS1973

The JSC clustering program ISOCLS and its applications

The clustering program ISOCLS developed at the Johnson Space Center, Houston, Texas, has been extensively used in the pattern analysis and classification of remote sensor data collected by aircraft and by the Earth Resources Technology Satellite ERTS-1. This paper discusses the theory behind this clustering algorithm. Several new ideas that have been incorporated in ISOCLS are discussed. Among these are the novel philosophy of operation behind the procedure, which assumes that a population (i.e., a class or a cluster) can be treated as the union of an appropriate number of subpopulations, and the termination of the clustering program by a 'chaining algorithm.' Finally, this paper reports the results of the application of ISOCLS to an investigation on rangeland vegetation mapping using ERTS-1 data.

Kan, E. P.↗
NASA NTRS1974

Thermal design of the Viking lander capsule

During the summer of 1975, two Viking spacecraft will be launched toward Mars, each consisting of a lander capsule coupled to an orbiter. About a year later, the orbiters will go into orbit around Mars and then the landers will descend to begin operation on the surface of Mars for 90 day missions. This paper describes the thermal control aspects of the lander capsule design and operation. The paper presents the thermal control requirements, the design philosophy and approach to solving these thermal problems, and then a description of the resulting thermal control subsystem design features. It concludes with a summary of the vehicle thermal performance characteristics as determined from both analysis and system tests under simulated thermal environments.

Tracey, T. R.↗
NASA NTRS1974

Propulsion integration for a hybrid propulsive-lift system

In a discussion of STOL vehicles with conventional high-lift devices, the need for efficient power-augmented lift systems is presented, and the implications of quiet operation are noted. The underlying philosophy of a promising hybrid lift system with major interactions between aerodynamic, thermodynamic, acoustic, and configuration design technologies is derived. The technique by which engine and airframe-related characteristics for this application may be matched in an optimum manner is described and illustrated by describing the features of a particular short-haul commercial STOL vehicle.

Bowden, M. K.↗
NASA NTRS1973

Automatic control in planetary exploration in the 1980s

Based on an examination of the planetary missions in the 1980s and their related objectives, a broad assessment of the automatic control capabilities required for these missions is presented. The ten outer-planet, terrestrial-planet, and small-body missions considered involve various operations encompassing a complex series of modes including cruise, maneuver, and powered flight control. In addition to routine navigation and attitude control, onboard control is required to point scientific instruments and antennas with respect to the vehicle and to maneuver the spacecraft in time-constrained or hazardous environments. These 1980 missions aimed at exploring new areas of the solar system will be more demanding. New design philosophies and increased performance capabilities will be required to meet the constraints imposed by science requirements and mission-cost effectiveness.

Moore, J. W.↗
NASA NTRS1974

Recent advancements in information extraction methodology and hardware for earth resources survey systems

The present work discusses some recent developments in preprocessing and extractive processing techniques and hardware and in user applications model development for earth resources survey systems. The Multivariate Interactive Digital Analysis System (MIDAS) is currently being developed, and is an attempt to solve the problem of real time multispectral data processing in an operational system. The main features and design philosophy of this system are described. Examples of wetlands mapping and land resource inventory are presented. A user model developed for predicting the yearly production of mallard ducks from remote sensing and ancillary data is described.

Erickson, J. D.↗
NASA NTRS1974

Influence of precision inertial systems on astronomical observations

The incorporation of precision inertial control on LST could exert a strong influence on the philosophy of and techniques for carrying out astronomical observations. In conjunction with a fine guidance star sensor, the inertial reference unit (IRU) described herein could easily expand LST capability to include observations such as (1) tracking of solar system objects, including specific points of interest on the planets; (2) rapid repositioning of scanning sensors on distributed objects such as nebulae and galaxies; (3) carrying out unified star catalog measurements to eliminate the overlap problem which exists in all ground procedures; and (4) carrying out various astrometric measurements with 'real time' data reduction capability.

Ouellette, G. A.↗
NASA NTRS1974

ATM test and integration

The test and checkout philosophy of the test program for the Skylab ATM module and the overall test flow including in-process, post-manufacturing, vibration, thermal vacuum, and prelaunch checkout activities are described. Capabilities and limitations of the test complex and its use of automation are discussed. Experiences with the organizational principle of using a dedicated test team for all checkout activities are reported. Material on the development of the ATM subsystems, the experimental program and the requirements of the scientific community, and the integration and verification of the complex systems/subsystems of the ATM are presented. The performance of the ATM test program in such areas as alignment, systems and subsystems, contamination control, and experiment operation is evaluated. The conclusions and recommendations resulting from the ATM test program are enumerated.

Moore, J. W.↗
NASA NTRS1974

Generalized dynamic engine simulation techniques for the digital computer

Recently advanced simulation techniques have been developed for the digital computer and used as the basis for development of a generalized dynamic engine simulation computer program, called DYNGEN. This computer program can analyze the steady state and dynamic performance of many kinds of aircraft gas turbine engines. Without changes to the basic program, DYNGEN can analyze one- or two-spool turbofan engines. The user must supply appropriate component performance maps and design-point information. Examples are presented to illustrate the capabilities of DYNGEN in the steady state and dynamic modes of operation. The analytical techniques used in DYNGEN are briefly discussed, and its accuracy is compared with a comparable simulation using the hybrid computer. The impact of DYNGEN and similar all-digital programs on future engine simulation philosophy is also discussed.

Sellers, J.↗
NASA NTRS1974

Earth Observatory Satellite system definition study. Report no. 4: Management approach recommendations

A management approach for the Earth Observatory Satellite (EOS) which will meet the challenge of a constrained cost environment is presented. Areas of consideration are contracting techniques, test philosophy, reliability and quality assurance requirements, commonality options, and documentation and control requirements. The various functional areas which were examined for cost reduction possibilities are identified. The recommended management approach is developed to show the primary and alternative methods.

Source record↗
NASA NTRS1974

Adaptations of advanced safety and reliability techniques to petroleum and other industries

The underlying philosophy of the general approach to failure reduction and control is presented. Safety and reliability management techniques developed in the industries which have participated in the U.S. space and defense programs are described along with adaptations to nonaerospace activities. The examples given illustrate the scope of applicability of these techniques. It is indicated that any activity treated as a 'system' is a potential user of aerospace safety and reliability management techniques.

Purser, P. E.↗
NASA NTRS1975

Apollo experience report: The AN/ARD-17 direction finding system

This report contains a statement of the operational philosophy and requirements leading to the development of the AN/ARD-17 direction-finding system. The technical problems encountered and the solutions devised in the AN/ARD-17 development are discussed. An evaluation of the system under actual operational conditions is included.

Chase, W. R.↗
NASA NTRS1975

Generalized dynamic engine simulation techniques for the digital computers

Recently advanced simulation techniques have been developed for the digital computer and used as the basis for development of a generalized dynamic engine simulation computer program, called DYNGEN. This computer program can analyze the steady state and dynamic performance of many kinds of aircraft gas turbine engines. Without changes to the basic program, DYNGEN can analyze one- or two-spool turbofan engines. The user must supply appropriate component performance maps and design point information. Examples are presented to illustrate the capabilities of DYNGEN in the steady state and dynamic modes of operation. The analytical techniques used in DYNGEN are briefly discussed, and its accuracy is compared with a comparable simulation using the hybrid computer. The impact of DYNGEN and similar digital programs on future engine simulation philosophy is also discussed.

Sellers, J.↗
NASA NTRS1975

Apollo experience report: Engineering and analysis mission support

The tasks performed by the team of specialists that evaluated hardware performance during prelaunch checkout and in-flight operation are discussed. The organizational structure, operational procedures, and interfaces as well as the facilities and software required to perform these tasks are discussed. The scope of the service performed by the team and the evaluation philosophy are described. Summaries of problems and their resolution are included as appendixes.

Fricke, R. W., Jr.↗
NASA NTRS1975

A study of total space life performance of GSFC spacecraft

The space life performance of 57 Goddard Space Flight Center spacecraft is given. The time distribution of 449 malfunctions, of which 248 were classified as failures, is presented. Test data were available for 39 of the spacecraft and permitted a comparison of system test performance with the first-day, first-month, and total space life performance. The failures per spacecraft for the system environmental tests and the three time periods in space were 12, 0.9, 1.7, and 5.0, respectively. Relevance of the data to the pre-shuttle and shuttle eras is discussed. Classifications of failures by type of device and spacecraft subsystem are included. A continuation of the Goddard philosophy of requiring a system-level environmental test program is justified.

Timmins, A. R.↗
NASA NTRS1975

Space tug avionics definition study. Volume 3: Avionics baseline configuration definition

The baseline avionics systems for the space tug is comprised of a central digital computer that integrates the functions of all of the tug's subsystems by means of a redundant digital data bus. The major subsystems of the avionics system are: data management; communications; guidance, navigation, and control; rendezvous and docking; electrical power; and instrumentation. The baseline avionics system for the space tug resulting from system and subsystem trade studies is defined. Tug interfaces with the spacecraft, orbiter and the ground, and the baseline philosophy and configuration for onboard checkout of the tug are included. Baseline configurations, functional and operational features, component details and characteristics, and the supporting software are included in the subsystem descriptions.

Source record↗
NASA NTRS1975

Status and trends in active control technology

The emergence of highly reliable fly-by-wire flight control systems makes it possible to consider a strong reliance on automatic control systems in the design optimization of future aircraft. This design philosophy has been referred to as the control configured vehicle approach or the application of active control technology. Several studies and flight tests sponsored by the Air Force and NASA have demonstrated the potential benefits of control configured vehicles and active control technology. The present status and trends of active control technology are reviewed and the impact it will have on aircraft designs, design techniques, and the designer is predicted.

Rediess, H. A.↗
NASA NTRS1975

Power processing for electric propulsion

The inclusion of electric thruster systems in spacecraft design is considered. The propulsion requirements of such spacecraft dictate a wide range of thruster power levels and operational lifetimes, which must be matched by lightweight, efficient, and reliable thruster power processing systems. Electron bombardment ion thruster requirements are presented, and the performance characteristics of present power processing systems are reviewed. Design philosophies and alternatives in areas such as inverter type, arc protection, and control methods are discussed along with future performance potentials for meeting goals in the areas of power process or weight (10 kg/kW), efficiency (approaching 92 percent), reliability (0.96 for 15,000 hr), and thermal control capability (0.3 to 5 AU).

Finke, R. C.↗