Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ORBITS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Space shuttle orbiter trimmed center of gravity extension study. Volume 1: Effects of configuration modifications on the aerodynamic characteristics of the 140 A/B orbiter at Mach 10.3

Longitudinal and lateral-directional characteristics were obtained on several modified versions of the Rockwell International 140 A/B orbiter (0.010 scale). These modifications, designed to extend trim capability to center-of-gravity locations forward of the 65 percent fuselage station, consisted of two forebodies, two canard trimmers, and two body-wing fillets. Tests were performed over an angle-of-attack range of 12 to 36 degrees at a Reynolds number of 1.03 million based on body reference length. Data were obtained with the elevons and body flap deflected at the full-up and full-down design values. This investigation was conducted in the NASA Langley continuous flow hypersonic tunnel.

Bernot, P. T.↗
NASA NTRS1976

A methodology for small scale rural land use mapping in semi-arid developing countries using orbital imagery. Part 4: Review of land use surveys using orbital imagery outside of the USA

The author has identified the following significant results. Outside the U.S., various attempts were made to investigate the feasibility of utilizing orbital MSS imagery in the production of small scale land use maps. Overall, these studies are not as elaborate or extensive in their scope as the U.S. ones, and generally the non-U.S. investigators have employed nonsophisticated and less expensive techniques. A representative range of studies is presented to demonstrate the approaches and trends dealing with reprocessing, interpretation, classification, sampling, and ground truth procedures.

Vangenderen, J. L.↗
NASA NTRS1976

Space shuttle orbiter trimmed center-of-gravity extension study: Volume 2: Effects of configuration modifications on the aerodynamic characteristics of the 140 A/B orbiter at transonic speeds

Tests were conducted in the LaRC 8-foot transonic pressure tunnel to determine effects of fuselage nose and wing fillet modifications on the transonic aerodynamic characteristics of a space shuttle orbiter configuration. In addition to reshaping the baseline wing planform fillet, small canards were added to the configuration. The modifications considered were of interest in extending the forward center-of-gravity boundary for the configuration.

Phillips, W. P.↗
NASA NTRS1977

Orbit-orbit resonances among natural satellites

A qualitative physical description of the orbital resonance mechanism based on a previously published (Greenberg et al. 1972; Greenberg, 1973) mathematical analysis is presented. The fundamental principles of the resonance mechanism are illustrated by an examination of the Titan-Hyperion case. More complex resonances, including Enceladus-Dione, Mimas-Tethys are considered. Resonance phenomena involving the rings of Saturn, the inner three satellites of Uranus, and the inner three Galilean satellites of Jupiter are also discussed. The role of analyses of resonance phenomena in developing theories of satellite formation and evolution is examined.

Greenberg, R.↗
NASA NTRS1978

Space Shuttle Orbiter trimmed center-of-gravity extension study. Volume 4: Effects of configuration modifications on the aerodynamic characteristics of the 139B orbiter at Mach 20.3

Force tests were conducted at Mach 20.3 to determine the effect of several forebody, wing-fillet, and canard modifications on the hypersonic trim capability of a 139B Space Shuttle Orbiter model. Force and moment data were obtained at angles of attack of 10 deg to 54 deg at zero sideslip angle and at a Reynolds number of 1,900,000 based on body length. The results indicated that wing-fillet and canard modifications would increase the allowable forward trimmed center-of-gravity capability by as much as 3.0 percent of the body length.

Scallion, W. I.↗
NASA NTRS1980

Orbiter thermal pressure drop characteristics for shuttle orbiter thermal protection system components: High density tile, low density tile, densified low density tile, and strain isolation pad

Pressure drop tests were conducted on available samples of low and high density tile, densified low density tile, and strain isolation pads. The results are presented in terms of pressure drop, material thickness and volume flow rate. Although the test apparatus was only capable of a small part of the range of conditions to be encountered in a Shuttle Orbiter flight, the data serve to determine the type of flow characteristics to be expected for each material type tested; the measured quantities also should serve as input for initial venting and flow through analysis.

Lawing, P. L.↗
NASA NTRS1980

Initial assessment of the effects of energetic ion injections in the magnetosphere due to the transport of satellite power system components from low earth orbit to geosynchronous earth orbit

Potentially serious environmental effects exist when cargo orbital transfer vehicle (COTV) ion propulsion is used on the scale proposed in the preliminary definition studies of the Satellite Power System. These effects of the large scale injections of ion propulsion exhaust in the plasmasphere and in the outer magnetosphere were shown to be highly model dependent with major differences existing in the predicted effects of two models, the ion cloud model and the ion sheath model. The expected total number density deposition of the propellant Ar(+) in the plasmasphere, the energy spectra of the deposited Ar(+) and time dependent behavior of the Ar(+) injected into the plasmasphere by a fleet of COTV vehicles differ drastically between the two models. The ion sheath model was demonstrated to be applicable to the proposed Ar(+) beam physics if the beam was divergent and turbulent whereas the ion cloud model was not a realistic approximation for such a beam because the "frozen-field" assumption on which it is based is not valid.

Curtis, S. A.↗
NASA NTRS1983

Mars Geoscience Orbiter and Lunar Geoscience Orbiter

The feasibility of using the AE/DE Earth orbiting spacecraft design for the LGO and/or MGO missions was determined. Configurations were developed and subsystems analysis was carried out to optimize the suitability of the spacecraft to the missions. The primary conclusion is that the basic AE/DE spacecraft can readily be applied to the LGO mission with relatively minor, low risk modifications. The MGO mission poses a somewhat more complex problem, primarily due to the overall maneuvering hydrazine budget and power requirements of the sensors and their desired duty cycle. These considerations dictate a modification (scaling up) of the structure to support mission requirements.

Fuldner, W. V.↗
NASA NTRS1985

Space Shuttle Orbiter trimmed center-of-gravity extension study. Volume 9: Effects of configuration modifications on the aerodynamic characteristics of the 140 A/B Orbiter at Mach numbers of 1.5, 2.0, and 2.5

Wind-tunnel tests were conducted at Mach 1.5 to 2.5 to determine the effect of modifications designed to extend the forward center-of-gravity trim capability on the static longitudal and lateral directional characteristics of a Space shuttle 140 A/B orbiter model (0.01 scale). The modifications consisted of a forward-extended wing fillet, a flat plate canard, and a blended canard. The investigation was conducted in the low Mach number test section of the Langley unitary plan wind tunnel at a Reynolds number of approximately 2.15 million based on the fuselage reference length. The test angle of attack range was -1 deg to 32 deg and the sideslip angles were 0 deg and 5 deg.

Phillips, W. P.↗
NASA NTRS1987

Active vehicle charging measurements in sounding rocket and space shuttle orbiter environments at Low Earth Orbit (LEO) altitude

It was concluded that for electron beam emission up to 100mA, vehicle charging is not a significant problem with the Space Shuttle Orbiter. Similarly, sounding rocket payloads have no serious charging problems up to this level of beam current, provided that the maximum amount of the rocket skin is available to collect ionospheric electrons from the LEO altitude range. However, sounding rockets are marginal in their collecting area capability and other effects may occur to balance the beam current when operated at lower altitudes during the night.

Raitt, W. J.↗
NASA NTRS1986

The flux of meteoroids and orbital space debris striking satellites in low earth orbit

Results are presented from an analysis of 331 craters in the 0.09-250 micron size range found in the solid aluminum thermal control louvers of the Solar Maximum Mission spacecraft, distinguishing between natural meteoroid impacts and those of orbital spacecraft debris. The time-averaged flux and size distribution of both particle types over the 10 to the -13th to 10 to the -7th g mass range are directly determined.

Laurance, M. R.↗
NASA NTRS1988

Precision GPS orbit determination strategies for an earth orbiter and geodetic tracking system

Data from two 1985 GPS field tests were processed and precise GPS orbits were determined. With a combined carrier phase and pseudorange, the 1314-km repeatability improves substantially to 5 parts in 10 to the 9th (0.6 cm) in the north and 2 parts in 10 to the 8th (2-3 cm) in the other components. To achieve these levels of repeatability and accuracy, it is necessary to fine-tune the GPS solar radiation coefficients and ground station zenith tropospheric delays.

Lichten, Stephen M.↗
NASA NTRS1989

A numerical model of electrodynamics of plasma within the contaminant gas cloud of the Space Shuttle Orbiter at low earth orbit

A two-dimensional cloud was used to study the plasma dynamics within the outgas cloud associated with the Orbiter. It is shown that the polarization field is not symmetric about the direction of motion of the outgas cloud. It rotates in a way that can be predicted in simple cases by the ratio of the Hall and Pederson currents within the outgas cloud. The polarization field magnitude produced in the model was not large.

Eccles, J. Vincent↗
NASA NTRS1992

TOPEX orbit determination and gravity recovery using Global Positioning System data from repeat orbits

A covariance analysis is presented for satellite tracking and gravity recovery with a differential Global Positioning System-based technique to be demonstrated on TOPEX in the early 1990s. The technique employs data from an ensemble of repeat ground tracks to recover a unique satellite epoch state for each track and a set of invariant positional parameters common to all tracks. The positional parameters represent the effect of mismodeled gravitational field on the satellite orbit. At an altitude of 1336 km, where gravity modeling is the dominant systematic error, averaging of random error over many arcs and adjustment of the gravity model reduce the final satellite position error. The positional parameters can then be used to produce a refined global gravity model. The analysis indicates that errors ranging from 5 to 8 cm in TOPEX altitude and 0.05 to 0.2 mGal for the gravity field can be achieved, depending on the number of repeat arcs used.

Wu, Jiun-Tsong↗
NASA NTRS1992

Space Shuttle Orbiter Fleet Leader Orbital Maneuvering Engine SN 002A injector replacement

During testing of the Fleet Leader Orbital Maneuvering Engine (OME) Serial Number (SN) 002A at the White Sands Test Facility (WSTF) in 1983 the injector was inadvertently damaged. After testing was completed in 1985, there was a concern that the performance of the engine and its response to specific test conditions might not be sufficiently representative of flight engines to provide valid test results. To correct this damage, the engine was returned to the manufacturer to replace the injector. The task assigned was to evaluate the damage and generate a unique process to repair the Fleet Leader OME while providing minimum impact to the overall life condition of the engine. In addition to successfully performing the repair operation, the as received condition of the engine and its components were documented for Fleet Leader reference. The engine is currently at WSTF where it has accumulated 11,341 seconds of firing time to date, 2615 seconds of which have occurred since the engine repair.

Riccio, Joseph R.↗