Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OLEDs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Modeling the Charge and Exciton Distributions in Phosphorescent White Organic Light-Emitting Diodes

A comprehensive numerical model is developed to quantitatively analyze the charge and exciton distributions in phosphorescent white organic light emitting diodes (WOLEDs). The model encompasses bipolar charge drift-diffusion transport with doping-dependent charge mobilities, field-dependent charge hopping across multiple interfaces, exciton generation, diffusion, energy transfer, radiative decay, and non-radiative exciton annihilation. The model is validated by direct measurement of the exciton distribution in monochromatic phosphorescent OLEDs. It is then applied to complex, multilayer WOLEDs where it is used to accurately predict their intensity and current-dependent spectral shifts. The magnitudes of different exciton loss channels in WOLEDs are calculated and quantitatively compared. This model provides an alternative for the many experimental iterations commonly used to optimize the color balance of complex OLEDs. In this context, the model inspired the addition of a hole blocking layer in the WOLED to balance the charge conduction and reduce spectral shifts – a design that is verified by experiment.

42 ENGINEERING↗

Synthesis and Application of 1,3,4,5,7,8-Hexafluorotetracyanonaphthoquinodimethane (F6-TNAP): A Conductivity Dopant for Organic Light-Emitting Devices

We report the synthesis, photophysical and organic light-emitting device (OLED) properties of an organic molecular p-dopant 1,3,4,5,7,8-hexafluorotetracyanonaphthoquinodimethane (F6-TNAP). F6-TNAP was obtained in a three step 2 pot synthesis from commercially available octafluoronaphthalene. Doping effect of F6-TNAP was evaluated using films of 1-5% F6-TNAP with N,N'-di-1-naphthyl-N,N'-diphenyl-1,1'-biphenyl-4,4'diamineα-NPD) co-evaporated on quartz. UV-vis analysis of these films showed an absorption peak at 950 nm corresponding to the charge transfer complex resulting from electron transfer from α-NPD to F6-TNAP. Hole only devices using α-NPD as the hole transport layer (HTL) doped with F6-TNAP show greater than 2V decrease in operating voltage compared to the undoped device. A decrease in operating voltage was also demonstrated in blue OLED devices using F6-TNAP doped HTL, with a slight decrease in external quantum efficiency (EQE), thus resulting in a net improvement in power efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Phosphine Oxide Based Electron Transporting and Hole Blocking Materials for Blue Electrophosphorescent Organic Light Emitting Devices

We report the design, synthesis, thermal, and photophysical properties of two phosphine oxide based electron transport/hole blocking materials, 2,6-bis(4-(diphenylphosphoryl)phenyl)pyridine (BM-A11) and 2,4-bis(4-(diphenyl-phosphoryl)phenyl)pyridine (BM-A10) for blue electrophosphorescent organic light emitting devices (OLEDs). The use of these materials in blue OLED with iridium (III) bis[(4,6-difluorophenyl)-pyridinato-N,C2’]picolinate (Firpic) as the phosphor was demonstrated. Using the dual host device architecture with BM-A10 as the ETM yields a maximum EQE of 8.9% with a power efficiency of 21.5 lm/W (4.0V and 35 cd/m2). When BM-A11 is used as the ETM, the maximum EQE and power efficiency improves to 14.9% and 48.4 lm/W, respectively (3.0V and 40 cd/m2).

36 MATERIALS SCIENCE↗

Inductive effects of diphenylphosphoryl moieties on carbazole host materials: Design rules for blue electrophosphorescent organic light-emitting devices

We show that the inductive electron-withdrawing effect of diphenylphosphoryl (Ph2P=O) groups stabilizes both the highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO) of a carbazole chromophore. This improves electron injection from a cathode without affecting the high triplet exciton energy (ET ~ 3.0 eV) of the host material. Three new carbazole derivatives 3,6-bis(diphenylphosphoryl)-9-ethylcarbazole (PO10), 3,6-bis(diphenylphosphoryl)-9-phenylcarbazole (PO9) and N-(4-diphenylphosphoryl phenyl) carbazole (MPO12) were investigated as host materials in blue phosphor-doped organic light-emitting devices (OLEDs). Photophysical characterization showed all three carbazole derivatives exhibit monomer UV fluorescence (367-385 nm) in solution and contributions from molecular aggregates in solid-state films (378-395 nm). The polar MPO12 derivative exhibited solvatochromism and had the highest propensity for aggregate formation in the solid-state. Testing of OLEDs using PO9, PO10 and MPO12 as host materials for the sky blue organometallic phosphor, iridium(III)bis(4,6-(di-fluorophenyl)-pyridinato-N,C2') picolinate (FIrpic) gave external quantum efficiencies (EQE) and operating voltages at a similar current density (J = 13 mA/cm2) of 6 - 8 % at < 7V. The best device performance was exhibited using MPO12 as the host when an appropriate hole blocking layer was implemented. At a brightness of 800 cd/m2 an EQE of 9.09 ± 0.12% at 4.8 V was achieved. The higher performance of MPO12 was attributed to the ambipolar charge transporting character of the polar carbazole derivative. However, exciton relaxation on nonradiative aggregate or excimer states of all host materials studied may limit further improvements in device efficiencies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Naturally ornate RNA-only complexes revealed by cryo-EM

The structures of natural RNAs remain poorly characterized and may hold numerous surprises. Here we report three-dimensional structures of three large ornate bacterial RNAs using cryo-electron microscopy (cryo-EM). GOLLD (Giant, Ornate, Lake- and Lactobacillales-Derived), ROOL (Rumen-Originating, Ornate, Large) and OLE (Ornate Large Extremophilic) RNAs form homo-oligomeric complexes whose stoichiometries are retained at lower concentrations than measured in cells. OLE RNA forms a dimeric complex with long co-axial pipes spanning two monomers. Both GOLLD and ROOL form distinct RNA-only multimeric nanocages with diameters larger than the ribosome, each empty except for a disordered loop. Extensive intramolecular and intermolecular A-minor interactions, kissing loops, an unusual A–A helix and other interactions stabilize the three complexes. Sequence covariation analysis of these large RNAs reveals evolutionary conservation of intermolecular interactions, supporting the biological importance of large, ornate RNA quaternary structures that can assemble without any involvement of proteins.

59 BASIC BIOLOGICAL SCIENCES↗

Ultrafast intersystem-crossing in platinum containing π-conjugated polymers with tunable spin-orbit coupling

The development of efficient organic light-emitting diodes (OLED) and organic photovoltaic cells requires control over the dynamics of spin sensitive excitations. Embedding heavy metal atoms in p-conjugated polymer chains enhances the spin-orbit coupling (SOC), and thus facilitates intersystem crossing (ISC) from the singlet to triplet manifolds. Here we use various nonlinear optical spectroscopies such as two-photon absorption and electroabsorption in conjunction with electronic structure calculations, for studying the energies, emission bands and ultrafast dynamics of spin photoexcitations in two newly synthesized p-conjugated polymers that contain intrachain platinum (Pt) atoms separated by one (Pt-1) or three (Pt-3) organic spacer units. The controllable SOC in these polymers leads to a record ISC time of ,,1 ps in Pt-1 and ,6 ps in Pt-3. The tunable ultrafast ISC rate modulates the intensity ratio of the phosphorescence and fluorescence emission bands, with potential applications for white OLEDs.

CHEMICAL PHYSICS↗

Novel blue fluorescent emitters structured by linking triphenylamine and anthracene derivatives for organic light-emitting devices with EQE exceeding 5%

Achieving an external quantum efficiency exceeding 5% for traditional blue fluorescent organic light emitting devices (OLEDs) is still a current challenge due to the 25% limit of the radiative exciton yield. Bipolar organic molecules with a special hybrid local-excited and charge-transfer state have showed huge potential to address this issue. Herein, we designed and synthesized two novel bipolar compounds, namely TPA-AN-NA and TPA-AN-TFP, which were structured by simply linking a donor of triphenylamine (TPA) and both acceptors of anthracene derivatives. Both resulting compounds show good blue emission with emission peaks at 468 and 471 nm and photoluminescence quantum yields of 30.68 and 23.96% in thin films for TPA-AN-NA and TPA-AN-TFP, respectively. They also exhibit good solubility and can dissolve in several organic solvents with different polarities. Further, the fabricated blue OLEDs with TPA-AN-NA and TPA-AN-TFP as emitters also realize the corresponding blue emission well with electroluminescence peaks at 464 and 472 nm, respectively. The TPA-AN-NA-based blue device achieves a high external quantum efficiency of 5.44% and a radiative exciton yield of 56.68%, exceeding the theoretical limit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbazole-substituted benzobisoxazoles: near-UV fluorescent emitters and ambipolar hosts for organic light-emitting diodes

The design of organic light emitting diode (OLED) materials with the potential for exhibiting thermally-activated delayed fluorescence (TADF) is reported. Using computational methods (DFT/TD-DFT) as a guiding tool, six materials with a benzobisoxazole (BBO) core and donor–acceptor–donor architectures were designed by changing the conjugation position of carbazole-substituted phenyl substituents and the type of BBO isomer (cis- vs. trans-). Experimental steady-state and transient absorption spectroscopic techniques were utilized to probe the TADF activity of these molecules. Each material was then used in host–guest OLED devices as either near-UV dopants or host with low singlet-triplet energy differences. The electroluminescent properties show that when used as dopants these materials provide near-UV emission (CIE y < 0.06 and CIE x = 0.16), whereas when used as hosts, these materials show reduced operating voltages and increased performance efficiencies when compared to commercial materials.

36 MATERIALS SCIENCE↗

High-efficiency turquoise-blue electrophosphorescence from a Pt(II)-pyridyltriazolate complex in phosphine oxide host

We have demonstrated high-efficiency turquoise-blue electrophosphorescence from the complex Pt(ptp)2 = bis[3,5–bis(2–pyridyl)–1,2,4–triazolato]platinum(II) doped in the wide band-gap, ambipolar phosphine oxide host HM-A1 = 4-(diphenylphosphoryl)-N,N-diphenylaniline. For devices with 5% Pt(ptp)2 doping in HM-A1, we have achieved a peak external quantum efficiency and power efficiency of (11.8 ± 0.6) % and (61.2 ± 5.9) lm/W with high-pixel values of 13.1 % and 70.6 lm/W, respectively. These parameters maintained (10.6 ± 0.2) % and (40.3 ± 1.2) lm/W at a brightness of 1000 cd/m2 with high-pixel values of 10.8 % and 41.6 lm/W. Examination of several device structures suggests that the high performance is due to improved charge transport and exciton confinement in the emissive region. Devices with 1-10% doping concentration exhibit turquoise-blue emissions (λmax ~ 480 nm) with a monotonic decrease in monomer/excimer intensity ratio upon increasing the doping concentration. Devices with 5% doping exhibit sufficient blue contribution to attain white light upon combination with highly-doped or neat emissive layers of the same phosphor; the work herein represents a significant backdrop toward optimizing such white OLEDs given the performance metrics above, which to our knowledge represent the highest performance for OLEDs that exhibit blue emission maxima.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Manganese-doped indium oxide and its application in organic light-emitting diodes

Thin films of manganese-doped indium oxide (IMO) deposited by electron beam evaporation have been investigated as anodes in organic light-emitting diodes (OLEDs). The IMO films have a high work function of 5.35 eV, a desirable surface morphology with an average roughness of 1.1 nm, a high average optical transmittance of 87.2% in the visible region, and a maximum optical transmittance of 92% at 460 nm. It is demonstrated that an IMO anode can effectively improve hole injection at the anode/organic interface, resulting in OLEDs with an increased electroluminescent efficiency.

36 MATERIALS SCIENCE↗

MoO3 as combined hole injection layer and tapered spacer in combinatorial multicolor microcavity organic light emitting diodes

Multicolor microcavity ({mu}C) organic light-emitting diode (OLED) arrays were fabricated simply by controlling the hole injection and spacer MoO{sub 3} layer thickness. The normal emission was tunable from {approx}490 to 640 nm and can be further expanded. A compact, integrated spectrometer with two-dimensional combinatorial arrays of {mu}C OLEDs was realized. The MoO{sub 3} yields more efficient and stable devices, revealing a new breakdown mechanism. The pixel current density reaches {approx}4 A/cm{sup 2} and a maximal normal brightness {approx}140 000 Cd/m{sup 2}, which improves photoluminescence-based sensing and absorption measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding the role of electron and hole trions on current transport in aluminium tris(8-hydroxyquinoline) using organic magnetoresistance

The change in current through an organic light emitting diode (OLED) when it is placed in a magnetic field has been dubbed organic magnetoresistance and provides a means to understand the spin interactions that are occurring in working devices. Whilst there are a wide range of interactions that have been proposed to be the cause of the measured effects, there is still a need to identify their individual roles and in particular how they respond to an applied magnetic field. In this work, we investigate the effect of changing the balance of electron and hole injection in a simple aluminium tris(8-hydroxyqinoline) based OLED and demonstrate that the triplet polaron interaction appears to be much stronger for electrons than for holes in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calcium chloride electron injection/extraction layers in organic electronic devices

Nontoxic calcium chloride (CaCl{sub 2}) was introduced into organic electronic devices as cathode buffer layer (CBL). The turn-on voltage and maximum luminance of organic light-emitting diode (OLED) with 1.5 nm CaCl{sub 2} was 3.5 V and 21 960 cd/m{sup 2}, respectively. OLED with 1.5 nm CaCl{sub 2} possessed comparable electroluminescent characteristics to that of the commonly used LiF. Moreover, the performance of the organic photovoltaic device with 0.5 nm CaCl{sub 2} was comparable to that of the control device with LiF. Therefore, CaCl{sub 2} has the potential to be used as the CBL for organic electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phosphorescence lifetimes of organic light-emitting diodes from two-component time-dependent density functional theory

“Spin-forbidden” transitions are calculated for an eight-membered set of iridium-containing candidate molecules for organic light-emitting diodes (OLEDs) using two-component time-dependent density functional theory. Phosphorescence lifetimes (obtained from averaging over relevant excitations) are compared to experimental data. Assessment of parameters like non-distorted and distorted geometric structures, density functionals, relativistic Hamiltonians, and basis sets was done by a thorough study for Ir(ppy){sub 3} focussing not only on averaged phosphorescence lifetimes, but also on the agreement of the triplet substate structure with experimental data. The most favorable methods were applied to an eight-membered test set of OLED candidate molecules; Boltzmann-averaged phosphorescence lifetimes were investigated concerning the convergence with the number of excited states and the changes when including solvent effects. Finally, a simple model for sorting out molecules with long averaged phosphorescence lifetimes is developed by visual inspection of computationally easily achievable one-component frontier orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The influence of charge injection from intermediate connectors on the performance of tandem organic light-emitting devices

Charge generation in a typical intermediate connector, composed of “n-type doped layer/transition metal oxide (TMO)/hole transporting layer (HTL),” of a tandem organic light-emitting device (OLED) has recently been found to arise from charge transfer at the TMO/HTL interfaces. In this paper, we investigate the effect of hole injection barriers from intermediate connectors on the performance of tandem OLEDs. The hole injection barriers are caused by the offset of the highest occupied molecular orbital (HOMO) energy levels between HTLs contained in the intermediate connector and the top electroluminescence (EL) unit. We also find that although charge generation can occur at the interfaces between the TMO and a wide variety of HTLs of different HOMO values, an increase in the hole injection barrier however limits the electroluminescence efficiency of the top EL units. In the case of large hole injection barriers, significant charge accumulation in the HTLs makes the intermediate connector lose its functionality gradually over operating time, and limits device stability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Horizontal molecular orientation in solution-processed organic light-emitting diodes

Horizontal orientation of the emission transition dipole moments achieved in glassy vapor-deposited organic thin films leads to an enhancement of the light out-coupling efficiency in organic light-emitting diodes (OLEDs). Here, our combined study of variable angle spectroscopic ellipsometry and angle dependent photoluminescence demonstrates that such a horizontal orientation can be achieved in glassy spin-coated organic films based on a composite blend of a heptafluorene derivative as a dopant and a 4,4′-bis(N-carbazolyl)-1,1′-biphenyl as a host. Solution-processed fluorescent OLEDs with horizontally oriented heptafluorene emitters were then fabricated and emitted deep blue electroluminescence with an external quantum efficiency as high as 5.3%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Suppression of roll-off characteristics of organic light-emitting diodes by narrowing current injection/transport area to 50 nm

Using e-beam nanolithography, the current injection/transport area in organic light-emitting diodes (OLEDs) was confined into a narrow linear structure with a minimum width of 50 nm. This caused suppression of Joule heating and partial separation of polarons and excitons, so the charge density where the electroluminescent efficiency decays to the half of the initial value (J{sub 0}) was significantly improved. A device with a narrow current injection width of 50 nm exhibited a J{sub 0} that was almost two orders of magnitude higher compared with that of the unpatterned OLED.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulation of mixed-host emitting layer based organic light emitting diodes

‘SimOLED’ simulator is used in this work to investigate the efficiency of the mixed-host organic light emitting devices (MH-OLEDs). Tris-(8-hydroxyquinoline) aluminum(3) (Alq{sub 3}) and N,N-diphenyl-N,N-Bis(3-methylphenyl)-1,1-diphenyl-4,4-diamine (TPD) are used as the electron transport layer (ETL) material and hole transport layer (HTL) material respectively, and the indium-doped tin oxide (ITO) and aluminum (Al) as anode and cathode. Three MH-OLEDs, A, B and C with the same structure of ITO / HTM (15 nm) / Mixed host (70 nm) / ETM (10 nm) /Al, are stimulated with ratios TPD:Alq{sub 3} of 3:5, 5:5, and 5:3 respectively. The Poole-Frenkel model for electron and hole mobilities is employed to compute the current density-applied voltage-luminance characteristics, distribution of the electric field, carrier concentrations and recombination rate.

36 MATERIALS SCIENCE↗