Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

NUMERICAL PREDICTIONS OF MEAN PERFORMANCE AND DYNAMIC BEHAVIOR OF A 10 MWe SCO2 COMPRESSOR WITH TEST DATA VALIDATION

High-fidelity aerodynamic analysis has been demonstrated for mean performance and unsteady dynamics in a sCO2 compressor designed by Hanwha Power Systems Americas for a 10 MWe Concentrating Solar Power plant. Simulations were performed with CRUNCH CFD® software tool that was matured to accurately model near critical real fluid effects in sCO2. Pre-test predictions for mean performance were validated with test data collected later. Performance predictions were accurate and captured sensitivity of the efficiency to inlet temperature of CO2 as well as steep drop-off at high flow rates due to condensation in the inlet throat. Detailed analysis was performed to understand the source of these performance losses at near critical conditions. Unsteady dynamic effects in the compressor at off-design conditions were also identified and quantified. In particular a system wide “condensation surge” condition was detected at high flow coefficients that results in large amplitude pulsations with accompanying mass flow fluctuations at low frequencies and has potential to cause damage in closed loop systems.

hosangadi, ashvin↗
DOE OSTI2021

CERES : a cryo-EM re-refinement system for continuous improvement of deposited models

The field of electron cryomicroscopy (cryo-EM) has advanced quickly in recent years as the result of numerous technological and methodological developments. This has led to an increase in the number of atomic structures determined using this method. Recently, several tools for the analysis of cryo-EM data and models have been developed within the Phenix software package, such as phenix.real_space_refine for the refinement of atomic models against real-space maps. Also, new validation metrics have been developed for low-resolution cryo-EM models. To understand the quality of deposited cryo-EM structures and how they might be improved, models deposited in the Protein Data Bank that have map resolutions of better than 5 Å were automatically re-refined using current versions of Phenix tools. The results are available on a publicly accessible web page (https://cci.lbl.gov/ceres). The implementation of a Cryo-EM Re-refinement System ( CERES ) for the improvement of models deposited in the wwPDB, and the results of the re-refinements, are described. Based on these results, contents are proposed for a `cryo-EM Table 1', which summarizes experimental details and validation metrics in a similar way to `Table 1' in crystallography. The consistent use of robust metrics for the evaluation of cryo-EM models and data should accompany every structure deposition and be reported in scientific publications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Extracting and Interpreting Electrochemical Impedance Spectra (EIS) from Physics-Based Models of Lithium-Ion Batteries

This paper implements a highly efficient algorithm to extract electrochemical impedance spectra (EIS) from physics-based battery models (e.g., a P2D model). The mathematical approach is different from how EIS is practiced experimentally. Experimentally, the voltage (current) is harmonically perturbed over a wide range of frequencies and the amplitude and phase shift of the corresponding current (voltage) is measured. The experimental approach can be implemented in simulation software, but is computationally expensive. The approach here is to determine locally linear state-space models from the full physical model. The four Jacobian matrices that are the basis of the state-space models can be derived by numerical differentiation of the physical model. The EIS is then extracted from the state-space model using computationally efficient matrix-manipulation techniques. The algorithm can evaluate the full EIS at an instant in time during a transient, independent of whether the battery is in a stationary state. The approach is also able to separate the full-cell impedance to evaluate partial EIS, such as for a battery anode alone. Although such partial EIS is difficult to measure experimentally, the partial EIS provides valuable insights in interpreting the full-cell EIS.

25 ENERGY STORAGE↗
DOE OSTI2022

NISQ Benchmarking

Test suite of quantum algorithms for Noisy Intermediate Scale Quantum (NISQ) computers. The test suite includes benchmark-style code for quantum volume circuits (QV), fairness sampling circuits, quantum telecloning circuits, and other NISQ benchmark style algorithms on small problems (i.e., up to 100 qubits), such as Variational Quantum Eigensolver (VQE), Hamiltonian Simulation, and Grover unstructured search example circuits. These benchmark-style applications are implemented in quantum software packages, mostly IBM's QISKIT, but may include vendor-specific frameworks, such as PyQuil (for Rigetti) or Q\# for Microsoft, or CirQ (for Google) as the test suite grows with the vendor sample. The test suite also includes numerical simulation code for Quantum Alternating Operator Ansatz (QAOA) algorithms, VQE, Hamiltonian Simulation and search examples. Numerical simulation code simulates quantum computers on classical computers, which is only possible for small problem instances; the implementation framework of choice is typically within Python, using the numpy/scipy libraries as well as extensions to the Julia language.

Pelofske, Elijah↗
DOE OSTI2023

Proxy Applications for Converged Workloads: DMC LDRD Initiative

Modern scientific applications are complicated and require coordination of several components. Proxy application driven software-hardware co-design plays a vital role in driving innovation among the developments of applications, software infrastructure and hardware architecture. Proxy applications are self-contained and simplified codes that are intended to model the performance-critical computations within applications. Applications executing on modern High Performance Computing (HPC) systems are susceptible to network congestion, insufficient memory bandwidth within and across compute nodes, and inadvertent loss of performance due to bugs and unoptimized programming models. Modern numerical simulations and machine learning models play a critical role in studying physical phenomenon under myriad uncertainties. Such applications often exhibit irregular computation and memory accesses at specific regions of the application code, which can contribute to various performance bottlenecks at scale. To mitigate such issues and prepare the next generation hardware for a variety of computation and data movement contingencies, a well-known practice is to consider "proxy" applications as representative motifs for various classes of scientific applications. While there is disagreement in the HPC community on the mechanisms of construction of the proxy applications, there is a strong consensus on their positive impact in co-design. Proxy Applications for Converged Workloads (PACER) is about facilitating software-hardware co-design through proxy applications with the goal of improving the performance of converged science workflows on heterogeneous systems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Implementation of the Glued Sphere Discrete Element Model for Non-Spherical Particles in MFiX Software

To enhance solver capabilities, simulation flexibility and model validation within the MFiX software, the U.S. Department of Energy (DOE) is funding efforts to develop and integrate the glued-sphere discrete element method into the latest version of MFiX as a dedicated computational module. The glued-sphere discrete element method is a numerical technique to depict the behavior of non-spherical particles in granular flows or particulate systems by representing them as a collection of component spheres. These spheres are bonded together to approximate the shape and mechanical/chemical properties of a more complex particle. The method effectively reuses the existing sphere-sphere collision algorithm, interphase momentum and heat transfer calculations utilized in the traditional discrete element method, extending these capabilities to non-spherical particles. Additionally, this method explicitly resolves intra-particle temperature and species distributions. The MFiX glued-sphere computational module includes tools for generating glued sphere configurations, a dedicated solver, and visualization capabilities in post-processing. More specifically within the computational module, collision detection and calculations were first performed on component spheres and then mapped onto non-spherical particles. The linear spring-dashpot model was utilized to simulate the sphere-sphere interactions.

Ke, Renjie↗
DOE OSTI2025

SineKAN: Kolmogorov-Arnold Networks using sinusoidal activation functions

Recent work has established an alternative to traditional multi-layer perceptron neural networks in the form of Kolmogorov-Arnold Networks (KAN). The general KAN framework uses learnable activation functions on the edges of the computational graph followed by summation on nodes. The learnable edge activation functions in the original implementation are basis spline functions (B-Spline). Here, we present a model in which learnable grids of B-Spline activation functions are replaced by grids of re-weighted sine functions (SineKAN). We evaluate numerical performance of our model on a benchmark vision task. We show that our model can perform better than or comparable to B-Spline KAN models and an alternative KAN implementation based on periodic cosine and sine functions representing a Fourier Series. Further, we show that SineKAN has numerical accuracy that could scale comparably to dense neural networks (DNNs). Compared to the two baseline KAN models, SineKAN achieves a substantial speed increase at all hidden layer sizes, batch sizes, and depths. Current advantage of DNNs due to hardware and software optimizations are discussed along with theoretical scaling. Additionally, properties of SineKAN compared to other KAN implementations and current limitations are also discussed.

Reinhardt, Eric↗
DOE OSTI2026

Numerical Modeling & Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC) (CRADA Final Report)

This project represents a continuation of the collaboration between iProTech and NLR to simulate, optimize and design the iProTech Pitching Inertial Pump (PIP) device. The objectives of this TEAMER project are twofold: 1. Refining the physical characteristics of the existing iProTech PIP WEC-Sim model to enhance the model’s fidelity and include controllable components. Key model enhancements target the inclusion of Coulomb friction, the introduction of a controllable bypass valve, and the replacement of traditional check valves with advanced motorized ones. 2. Exploring traditional and advanced control algorithms. From traditional methods like latching control to cutting-edge reinforcement learning (RL) algorithms, the goal is to ensure the PIP device's adaptability and optimal performance across a range of ocean conditions. NLR is tasked with augmenting the WEC-Sim model and implementing the control algorithms, culminating in performance comparison analyses. iProTech will update their existing 3D models, advise on model improvements, and determine crucial system metrics. WEC-Sim, developed in MATLAB/SIMULINK with Simscape Multibody, is the main piece of software that will be used in this project. Coupled with the MATLAB RL Toolbox, it offers a robust platform for in-depth simulation and optimization of the iProTech PIP device. Building on previous work to explore the PIP design space and optimize its geometry, mass distribution, center of gravity and other key parameters, this project aims to refine iProTech’s existing numerical models and develop effective control algorithms that can seamlessly integrate into their future hardware testing campaigns.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

NESSi : The N on- E quilibrium S ystems S imulation package

The nonequilibrium dynamics of correlated many-particle systems is of interest in connection with pump–probe experiments on molecular systems and solids, as well as theoretical investigations of transport properties and relaxation processes. Nonequilibrium Green’s functions are a powerful tool to study interaction effects in quantum many-particle systems out of equilibrium, and to extract physically relevant information for the interpretation of experiments. Here, we present the open-source software package NESSi (The Non-Equilibrium Systems Simulation package) which allows to perform many-body dynamics simulations based on Green’s functions on the L-shaped Kadanoff–Baym contour. NESSi contains the library libcntr which implements tools for basic operations on these nonequilibrium Green’s functions, for constructing Feynman diagrams, and for the solution of integral and integro-differential equations involving contour Green’s functions. The library employs a discretization of the Kadanoff–Baym contour into time points and a high-order implementation of integration routines. The total integrated error scales up to $\mathcal{O}(N^{-7})$, which is important since the numerical effort increases at least cubically with the simulation time. A distributed-memory parallelization over reciprocal space allows large-scale simulations of lattice systems. We provide a collection of example programs ranging from dynamics in simple two-level systems to problems relevant in contemporary condensed matter physics, including Hubbard clusters and Hubbard or Holstein lattice models. The libcntr library is the basis of a follow-up software package for nonequilibrium dynamical mean-field theory calculations based on strong-coupling perturbative impurity solvers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Atmospheric Profile Builder

APBuilder is a software tool designed to generate atmospheric profiles for use with AC2Dr by downloading weather model data and transforming it into 1D or 2D binary profiles. These binary profiles serve as required inputs for AC2Dr, an LLNL-developed, open source, two-dimensional numerical solver for the acoustic wave equation based on the finite difference method.

Kim, Keehoon [Lawrence Livermore National Laborato↗
DOE OSTI2026

Optimal Operation of Residential High Performance Water Heater for Reduction of Electricity Cost and Peak Demand Through Field Validation

Water heating accounts for about 18% of a typical US home’s energy use. Modern water heaters have enabled control options through APIs, offering customers the opportunity to reduce their energy cost and peak demand by dynamically adjusting settings. A water heater’s capacity to store energy using its storage tank makes it an asset for peak demand reduction and energy cost savings. For this reason, a mixed-integer linear programming model is proposed to minimize the energy cost of a high-performance water heater while also reducing the peak demand of the residential household under a time-of-use utility rate by dynamically changing the water heater’s running mode. Specifically, a multi-objective optimization model is formulated to determine the mode settings of the water heater considering hot water use, time-of-use rate, and peak demand limit of the residential household. The mode settings are associated with different dead bands of water temperature for triggering on/off action of the heat pump and heating element. A 66-gal hybrid electric high performance water heater was used for numerical simulation and practical experiments. The simulation results were well aligned with measurements of practical experiments, validating the soundness of the thermodynamic model. In addition, reductions of energy cost, enabling affordability, and reducing peak demand are demonstrated. The research team also developed a software framework with dashboards to automatically and continuously monitor and manage devices.

Liu, Guodong [ORNL] (ORCID:0000000213498608)↗
DOE OSTI2023

DeePMD-kit v2: A software package for deep potential models

DeePMD-kit is a powerful open-source software package that facilitates molecular dynamics simulations using machine learning potentials known as Deep Potential (DP) models. This package, which was released in 2017, has been widely used in the fields of physics, chemistry, biology, and material science for studying atomistic systems. The current version of DeePMD-kit offers numerous advanced features, such as DeepPot-SE, attention-based and hybrid descriptors, the ability to fit tensile properties, type embedding, model deviation, DP-range correction, DP long range, graphics processing unit support for customized operators, model compression, non-von Neumann molecular dynamics, and improved usability, including documentation, compiled binary packages, graphical user interfaces, and application programming interfaces. This article presents an overview of the current major version of the DeePMD-kit package, highlighting its features and technical details. Additionally, this article presents a comprehensive procedure for conducting molecular dynamics as a representative application, benchmarks the accuracy and efficiency of different models, and discusses ongoing developments.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Accelerating Radiation Computations for Dynamical Models With Targeted Machine Learning and Code Optimization

Abstract Atmospheric radiation is the main driver of weather and climate, yet due to a complicated absorption spectrum, the precise treatment of radiative transfer in numerical weather and climate models is computationally unfeasible. Radiation parameterizations need to maximize computational efficiency as well as accuracy, and for predicting the future climate many greenhouse gases need to be included. In this work, neural networks (NNs) were developed to replace the gas optics computations in a modern radiation scheme (RTE+RRTMGP) by using carefully constructed models and training data. The NNs, implemented in Fortran and utilizing BLAS for batched inference, are faster by a factor of 1–6, depending on the software and hardware platforms. We combined the accelerated gas optics with a refactored radiative transfer solver, resulting in clear‐sky longwave (shortwave) fluxes being 3.5 (1.8) faster to compute on an Intel platform. The accuracy, evaluated with benchmark line‐by‐line computations across a large range of atmospheric conditions, is very similar to the original scheme with errors in heating rates and top‐of‐atmosphere radiative forcings typically below 0.1 K day −1 and 0.5 W m −2 , respectively. These results show that targeted machine learning, code restructuring techniques, and the use of numerical libraries can yield material gains in efficiency while retaining accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Model development for flash boiling spray and validations with isooctane, hexane, ethanol and their binary mixtures

The objective of this study is to develop a comprehensive model for spray atomization under the consideration of flash boiling, which includes nucleation, bubble growth, and droplet breakup. Although flash boiling has been previously studied, there is still no well-established analytical and numerical model of their mechanisms, or general guidelines on the implementation of this atomization strategy. In this study, detailed formulations are elaborated for the unified spray atomization model under both non-flash and flash boiling conditions. Next, the model was implemented into CFD software and 3-D simulations were performed for model validations. Two fuel blends are tested: ethanol-isooctane blends and hexane-isooctane blends. Simulation results were compared with the experimental measurements conducted using two methodologies, DBI (Diffuse Backlight Imaging) system for spray images captured by a high-speed camera, and a PDA (Phase Doppler Anemometry) system for droplet size measurement during the spray injection process. It was found that the current flash boiling model can accurately capture the spray characteristics under different environment conditions, such as the spray plume interactions and liquid penetration. The averaged Sauter mean diameter (SMD) calculations match the measurement sufficiently well. The spray structures for both single- and multi-component fuels during the injection process are well represented by current model.

42 ENGINEERING↗
DOE OSTI2021

Thermal-striping analysis methodology for sodium-cooled reactor design

Computational fluid dynamics simulations have been performed to study the applicability of engineering CFD methods for thermals striping analysis. Thermal striping is the fluctuating temperature profile in a solid caused by fluctuating fluid temperature, and the resulting fluctuating thermal stresses cause high cycle fatigue and eventual material failure. Here this study presents the methodology for thermal striping analysis that including a transient conjugate heat transfer RANS model and benchmark the results against a sodium triple jet experiment. The multiphysics calculations are implemented to analyze the thermal stresses in the solid domain caused by the coupled heat transfer between the fluid and solid domains. Validation data from a liquid sodium triple jet experiment include time-averaged temperature measurements and power spectra of the temperature signal. The numerical results agree well with these experimental measures, demonstrating key features such as the dominant frequency of temperature fluctuations. The applicability of a low-cost wall treatment method is demonstrated, enabling key computational savings. Finally, the performance of two finite element stress analysis software packages is compared, and the validity of the lower-cost method is confirmed. These results demonstrate the applicability of engineering methods for computational thermal striping calculations, enabling thermal striping estimations in large fluid systems such as the core of a Sodium-cooled nuclear reactor.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

A New Semistructured Algebraic Multigrid Method

Multigrid methods are well suited to large massively parallel computer architectures because they are mathematically optimal and display good parallelization properties. Since current architecture trends are favoring regular compute patterns to achieve high performance, the ability to express structure has become much more important. The hypre software library provides high-performance multigrid preconditioners and solvers through conceptual interfaces, including a semistructured interface that describes matrices primarily in terms of stencils and logically structured grids. This paper presents a new semistructured algebraic multigrid (SSAMG) method built on this interface. The numerical convergence and performance of a CPU implementation of this method are evaluated for a set of semistructured problems. In conclusion, SSAMG achieves significantly better setup times than hypre’s unstructured AMG solvers and comparable convergence. In addition, the new method is capable of solving more complex problems than hypre’s structured solvers.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Comparative analysis of thermal management systems in electric vehicles at extreme weather conditions: Case study on Nissan Leaf 2019 Plus, Chevrolet Bolt 2020 and Tesla Model 3 2020

With the surge in electric vehicle (EV) adoption and the need for extended driving ranges, optimizing energy efficiency, particularly through thermal management, is critical, especially in extreme weather. Managing the substantial energy needed for cabin climate control and battery temperature regulation can increase energy demands by over 50 %, severely limiting range. This study conducts a comparative analysis of thermal management systems (TMS) in three popular EV vehicles, 2020 Chevrolet Bolt, 2019 Nissan Leaf Plus, and 2020 Tesla Model 3, evaluating their distinct TMS configurations and performance under varied weather conditions. Using both numerical simulations and experimental data collected on a controlled test bench at Argonne National Laboratory, we assess how TMS architecture and operational modes influence energy consumption and range. A comprehensive TMS model was developed, integrating cabin and battery thermal sub-models in the Autonomie software platform, to simulate temperature fluctuations and range impacts. Cabin climate was modeled using a mono-zonal approach, while battery cell temperature distribution was estimated through a 2D nodal structure. Each vehicle's distinct TMS setup was evaluated: the Chevrolet Bolt and Tesla Model 3 use a dual evaporator vapor compression cycle with a PTC heater for the cabin and a coolant loop for battery thermal management; the Nissan Leaf Plus employs a heat pump with a PTC heater for the cabin and air-cooling for the battery. Tests conducted at ambient temperatures of 35°C, 22°C, -7°C, and -18°C reveal significant differences in energy use and range reduction across both configurations and conditions. At 35°C, the Tesla Model 3, Chevrolet Bolt, and Nissan Leaf Plus have a range reduction of 8%, 9%, and 13%, respectively, due to air conditioning. In winter, heating technology is paramount; at -7°C, the Nissan Leaf's heat pump configuration achieves a lower range reduction (19.3%) compared to the Tesla and Chevrolet Bolt PTC heaters, which reduce range by 28.3% and 31%, respectively. Further, this study provides valuable insights for automotive engineers, EV technology researchers, and thermal management system designers aiming to enhance electric vehicle performance by understanding how different weather conditions and TMS architectures impact energy consumption and driving range.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

MOSAIC: An Effective FFT-based Numerical Method to Assess Aging Properties of Concrete

As the nuclear fleet in the United States ages and subsequent license renewal applications grow, the prediction of concrete durability at extended operation becomes more important. To address this issue, a Fast-Fourier Transform (FFT) method is utilized to simulate aging-related degradation of concrete within the Microstructure Oriented Scientific Analysis of Irradiated Concrete (MOSAIC) software. MOSAIC utilizes compositional phase maps to simulate damage from radiation-induced volumetric expansion (RIVE), applied force, creep, and thermal expansion. This compositional detail allows each mineral in the microstructure to be assigned specific material properties, allowing the simulation to be as accurate and representative as possible. The principal goal of MOSAIC is to simulate the effects of nonlinear aging mechanisms occurring in nuclear concrete on the macroscopic mechanical properties, using only the aggregate microstructure compositional information as a starting point. Here, several realistic example simulations are shown to demonstrate the utility and uniqueness of the MOSAIC software.

36 MATERIALS SCIENCE↗