Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Numerical solutions of the compressible 3-D boundary-layer equations for aerospace configurations with emphasis on LFC

The application of stability theory in Laminar Flow Control (LFC) research requires that density and velocity profiles be specified throughout the viscous flow field of interest. These profile values must be as numerically accurate as possible and free of any numerically induced oscillations. Guidelines for the present research project are presented: develop an efficient and accurate procedure for solving the 3-D boundary layer equation for aerospace configurations; develop an interface program to couple selected 3-D inviscid programs that span the subsonic to hypersonic Mach number range; and document and release software to the LFC community. The interface program was found to be a dependable approach for developing a user friendly procedure for generating the boundary-layer grid and transforming an inviscid solution from a relatively coarse grid to a sufficiently fine boundary-layer grid. The boundary-layer program was shown to be fourth-order accurate in the direction normal to the wall boundary and second-order accurate in planes parallel to the boundary. The fourth-order accuracy allows accurate calculations with as few as one-fifth the number of grid points required for conventional second-order schemes.

Harris, Julius E.↗

Evaluation of a transfinite element numerical solution method for nonlinear heat transfer problems

Laplace transform techniques have been widely used to solve linear, transient field problems. A transform-based algorithm enables calculation of the response at selected times of interest without the need for stepping in time as required by conventional time integration schemes. The elimination of time stepping can substantially reduce computer time when transform techniques are implemented in a numerical finite element program. The coupling of transform techniques with spatial discretization techniques such as the finite element method has resulted in what are known as transfinite element methods. Recently attempts have been made to extend the transfinite element method to solve nonlinear, transient field problems. This paper examines the theoretical basis and numerical implementation of one such algorithm, applied to nonlinear heat transfer problems. The problem is linearized and solved by requiring a numerical iteration at selected times of interest. While shown to be acceptable for weakly nonlinear problems, this algorithm is ineffective as a general nonlinear solution method.

Cerro, J. A.↗

A simple time-accurate turbomachinery algorithm with numerical solutions of an uneven blade count configuration

The present computer algorithm for the time-accurate flow analysis of rotating turbomachines is based on the finite-volume method and employs a high-resolution approximate Riemann solver for interface flux definitions and an implicit numerical scheme that possesses apparent unconditional stability. Block-block interfaces, including dynamic ones, are treated in such a way as to mimic interior block communication. The turbomachine configurations treated by way of illustration are 8-8-bladed and 11-9-bladed versions of a contrarotating unducted fan engine.

Janus, J. Mark↗

Numerical solution of transonic wing flow fields

A fast, fully implicit, approximate factorization algorithm designed to solve the conservative full-potential equation is used to compute lifting-wing flow fields with embedded transonic flow. The computer program (TWING - transonic wing analysis) uses an elliptic-solver numerical grid-generation routine and is capable of analyzing arbitrary wing geometries with sweep, twist, taper, and section variation. Computed flowfield results for several wing geometries are presented; they demonstrate substantial improvement in convergence speed relative to the FL028 computer code.

Holst, T. L.↗

Numerical solutions of the linearized Euler equations for unsteady vortical flows around lifting airfoils

A linearized unsteady aerodynamic analysis is presented for unsteady, subsonic vortical flows around lifting airfoils. The analysis fully accounts for the distortion effects of the nonuniform mean flow on the imposed vortical disturbances. A frequency domain numerical scheme which implements this linearized approach is described, and numerical results are presented for a large variety of flow configurations. The results demonstrate the effects of airfoil thickness, angle of attack, camber, and Mach number on the unsteady lift and moment of airfoils subjected to periodic vortical gusts. The results show that mean flow distortion can have a very strong effect on the airfoil unsteady response, and that the effect depends strongly upon the reduced frequency, Mach number, and gust wave numbers.

Scott, James R.↗

Numerical solutions of the linearized Euler equations for unsteady vortical flows around lifting airfoils

A linearized unsteady aerodynamic analysis is presented for unsteady, subsonic vortical flows around lifting airfoils. The analysis fully accounts for the distortion effects of the nonuniform mean flow on the imposed vortical disturbances. A frequency domain numerical scheme which implements this linearized approach is described, and numerical results are presented for a large variety of flow configurations. The results demonstrate the effects of airfoil thickness, angle of attack, camber, and Mach number on the unsteady lift and moment of airfoils subjected to periodic vortical gusts. The results show that mean flow distortion can have a very strong effect on the airfoil unsteady response, and that the effect depends strongly upon the reduced frequency, Mach number, and gust wave numbers.

Scott, James R.↗

Numerical solutions of the linearized Euler equations for unsteady vortical flows around lifting airfoils

A linearized unsteady aerodynamic analysis is presented for unsteady, subsonic vortical flows around lifting airfoils. The analysis fully accounts for the distortion effects of the nonuniform mean flow on the imposed vortical disturbances. A frequency domain numerical scheme which implements this linearized approach is described, and numerical results are presented for a large variety of flow configurations. The results demonstrate the effects of airfoil thickness, angle of attack, camber, and Mach number on the unsteady lift and moment of airfoils subjected to periodic vortical gusts. The results show that mean flow distortion can have a very strong effect on the airfoil unsteady response, and that the effect depends strongly upon the reduced frequency, Mach number, and gust wave numbers.

Scott, James R.↗

The numerical solution of the Helmholtz equation for wave propagation problems in underwater acoustics

The Helmholtz Equation (-delta-K(2)n(2))u=0 with a variable index of refraction, n, and a suitable radiation condition at infinity serves as a model for a wide variety of wave propagation problems. A numerical algorithm was developed and a computer code implemented that can effectively solve this equation in the intermediate frequency range. The equation is discretized using the finite element method, thus allowing for the modeling of complicated geometrices (including interfaces) and complicated boundary conditions. A global radiation boundary condition is imposed at the far field boundary that is exact for an arbitrary number of propagating modes. The resulting large, non-selfadjoint system of linear equations with indefinite symmetric part is solved using the preconditioned conjugate gradient method applied to the normal equations. A new preconditioner is developed based on the multigrid method. This preconditioner is vectorizable and is extremely effective over a wide range of frequencies provided the number of grid levels is reduced for large frequencies. A heuristic argument is given that indicates the superior convergence properties of this preconditioner.

Bayliss, A.↗

Numerical solution of stiff systems of ordinary differential equations with applications to electronic circuits

Systems of ordinary differential equations in which the magnitudes of the eigenvalues (or time constants) vary greatly are commonly called stiff. Such systems of equations arise in nuclear reactor kinetics, the flow of chemically reacting gas, dynamics, control theory, circuit analysis and other fields. The research reported develops an A-stable numerical integration technique for solving stiff systems of ordinary differential equations. The method, which is called the generalized trapezoidal rule, is a modification of the trapezoidal rule. However, the method is computationally more efficient than the trapezoidal rule when the solution of the almost-discontinuous segments is being calculated.

Rosenbaum, J. S.↗

Numerical Solution of Moving Phase Boundary and Diffusion-Induced Stress of Sn Anode in the Lithium-Ion Battery

Here, we have previously observed a large transient stress in Sn film anodes at the beginning of the Sn-Li 2 Sn 5 phase transformation. To understand this behavior, we use numerical modeling to simulate the kinetics of the 1-D moving boundary and Li diffusion in the Sn anodes. A mixture of diffusion-controlled and interface-controlled kinetics is found. The Li concentration in the Li 2 Sn 5 phase remains near a steady-state profile as the phase boundary propagates, whereas the Li diffusion in Sn is more complicated. Li continuously diffuses into the Sn layer and produces a supersaturation; the Li can then diffuse toward the Sn/Li 2 Sn 5 interface and contribute to further phase transformation. Finally, the evolution of Li concentration in the Sn induces strain which involves rate-dependent plasticity and elastic unloading, resulting in the complex stress evolution that is observed. In the long term, the measured stress is dominated by the stress in the growing Li 2 Sn 5 phase.

25 ENERGY STORAGE↗

Numerical solution of viscous reacting blunt body flows of a multicomponent mixture.

Hypersonic flow of a chemically nonequilibrium multicomponent mixture past an axisymmetric blunt body is considered on the basis of the exact Navier-Stokes and chemical rate equations. The flowfield, characterized by a sharp shock and a boundary layer, is solved numerically in the region between the shock and the body. The governing equations are first formulated in generalized orthogonal coordinates, and then recast in computational coordinates in which both the shock and the body are two straight lines and one coordinate is stretched to allow higher space resolution near the body. The thermodynamic and transport properties are obtained from the most rigorous theories and reliable data for each component and for the mixture itself. A time-marching second-order finite-difference method is used to solve the equations.

Li, C. P.↗

Numerical solution of large Lyapunov equations

A few methods are proposed for solving large Lyapunov equations that arise in control problems. The common case where the right hand side is a small rank matrix is considered. For the single input case, i.e., when the equation considered is of the form AX + XA(sup T) + bb(sup T) = 0, where b is a column vector, the existence of approximate solutions of the form X = VGV(sup T) where V is N x m and G is m x m, with m small is established. The first class of methods proposed is based on the use of numerical quadrature formulas, such as Gauss-Laguerre formulas, applied to the controllability Grammian. The second is based on a projection process of Galerkin type. Numerical experiments are presented to test the effectiveness of these methods for large problems.

Saad, Youcef↗

Asynchronous and corrected-asynchronous numerical solutions of parabolic PDES on MIMD multiprocessors

A major problem in achieving significant speed-up on parallel machines is the overhead involved with synchronizing the concurrent process. Removing the synchronization constraint has the potential of speeding up the computation. The authors present asynchronous (AS) and corrected-asynchronous (CA) finite difference schemes for the multi-dimensional heat equation. Although the discussion concentrates on the Euler scheme for the solution of the heat equation, it has the potential for being extended to other schemes and other parabolic partial differential equations (PDEs). These schemes are analyzed and implemented on the shared memory multi-user Sequent Balance machine. Numerical results for one and two dimensional problems are presented. It is shown experimentally that the synchronization penalty can be about 50 percent of run time: in most cases, the asynchronous scheme runs twice as fast as the parallel synchronous scheme. In general, the efficiency of the parallel schemes increases with processor load, with the time level, and with the problem dimension. The efficiency of the AS may reach 90 percent and over, but it provides accurate results only for steady-state values. The CA, on the other hand, is less efficient, but provides more accurate results for intermediate (non steady-state) values.

Amitai, Dganit↗

Numerical solution of the Navier-Stokes equations with topography

A finite difference scheme for solving the equations of fluid motion in a generalized coordinate system has been constructed. The scheme conserves mass and all the first integral moments of the motion. The scheme also advectively 'almost conserves' second moments, in that the magnitude of implicit numerical smoothing is typically about an order smaller than explicit viscosity and diffusion. Calculations with the model support the theoretical conjecture that the difference scheme is stable whenever the analogous Cartesian scheme is stable. The scheme has been used to calculate dry atmospheric convection due to differential heating between top and bottom of mountainous terrain. The general small-scale characteristics of mountain up-slope winds have been simulated. In addition, the results have demonstrated the crucial role played by the eddy diffusivities and the environmental stability, in determining both the quantitative and the qualitative features of the circulation.

Gal-Chen, T.↗

The numerical solution of ordinary differential equations by the Taylor series method

A programming implementation of the Taylor series method is presented for solving ordinary differential equations. The compiler is written in PL/1, and the target language is FORTRAN IV. The reduction of a differential system to rational form is described along with the procedures required for automatic numerical integration. The Taylor method is compared with two other methods for a number of differential equations. Algorithms using the Taylor method to find the zeroes of a given differential equation and to evaluate partial derivatives are presented. An annotated listing of the PL/1 program which performs the reduction and code generation is given. Listings of the FORTRAN routines used by the Taylor series method are included along with a compilation of all the recurrence formulas used to generate the Taylor coefficients for non-rational functions.

Silver, A. H.↗

On the numerical solution of the exact factorization equations

The exact factorization (EF) approach to coupled electron-ion dynamics recasts the time-dependent molecular Schrödinger equation as two coupled equations, one for the nuclear wavefunction and one for the conditional electronic wavefunction. The potentials appearing in these equations have provided insight into non-adiabatic processes, and new practical non-adiabatic dynamics methods have been formulated starting from these equations. We provide a first demonstration of a self-consistent solution of the exact equations, with a preliminary analysis of their stability and convergence properties. The equations have an unprecedented mathematical form, involving a Hamiltonian outside the class of Hermitian Hamiltonians usually encountered in time-propagation, and so the usual numerical methods for time-dependent Schrödinger fail when applied in a straightforward way to the EF equations. We find an approach that enables stable propagation long enough to witness non-adiabatic behavior in a model system before non-trivial instabilities take over. Implications for the development and analysis of EF-based methods are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation A: Numerical solutions of driven vortices of binary fluid in a cylindrical geometry

The steady state laminar motion of a viscous, incompressible and binary fluid is studied for a rotating flow in a cylindrical geometry. The mathematical model employed is a cold flow simulation of the fluid mechanics of the light-bulb concept of the gaseous core nuclear engine. A numerical treatment is developed for the rotating flow which includes a description of the nuclear fuel addition. The problem is formulated with the complete Navier-Stokes equations in order to show the interaction between the fuel addition, the main flow, and the boundary layer flow in an accurate manner. The results presented show holdup of the nuclear fuel for the case of steady fuel addition.

Shin, Y. W.↗