Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NITRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Method and composition for reducing nitrates, nitrites, and/or hydroxylamine in water using a homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex

A method for reducing nitrates, nitrites, and/or hydroxylamine in water using a homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex. The method includes dissolving a copper(II) tetra-substituted fluorinated pinacolate ligand pre-catalyst complex in water having an excess amount of nitrates, nitrites, and/or hydroxylamine therein. The dissolved copper(II) tetra-substituted fluorinated pinacolate ligand pre-catalyst complex in the water is subjected to electrochemical reduction to form a homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex. The homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex reduces the nitrates, nitrites, and/or hydroxylamine in the water to compounds with nitrogen in a lower oxidation state with the homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dimensional stability under wet curing of mortars containing high amounts of nitrates and phosphates

Investigations were carried out in order to solidify in cement some aqueous streams resulting from nuclear decommissioning processes and characterized by a high salinity (300 g/L), as well as important concentrations of nitrate (150-210 g/L) and phosphate ions (0-50 g/L). Special attention was paid to the influence of these compounds on the dimensional variations under wet curing of simulated solidified waste forms. The length changes of mortars containing nitrate salts only (KNO{sub 3}, NaNO{sub 3}) were shown to be governed by a concentration effect which involved osmosis: the higher their concentration in the mixing solution, the higher the swelling. The expansion of mortars containing high amounts of phosphates ({>=} 30 g/L in the mixing solution) was preceded by a shrinkage which increased with the phosphate concentration, and which could be suppressed by seeding the cement used with hydroxyapatite crystals. This transitory shrinkage was attributed to the conversion into hydroxyapatite of a precursor readily precipitated in the cement paste after mixing.

36 MATERIALS SCIENCE↗

Preparation of nanodispersed titania using stabilized ammonium nitrate melts

An expedite one-step approach using simple precursors has been proposed to obtain metallic oxide compounds and exemplified by preparation of highly dispersed TiO{sub 2}. The technique consists in heating to 400-500 {sup o}C of molten ammonium nitrate stabilized with an organic nitrogen-containing compound (urea, melamine, ammonium oxalate) and containing dissolved metal salt precursor (TiOCl{sub 2}). The crystallites of the resulting TiO{sub 2} demonstrated variable size and shape as a function of stabilizer used. Their activity in photocatalytic oxidation of formic acid also depends on the nature of the stabilizer. The catalysts as-prepared showed high photocatalytic performance, superior to that of the Degussa P25 reference. Nitrogen containing stabilizers play a double role of increasing the process safety and modifying the properties of the solid products. - Graphical abstract: Ammonium nitrate melts stabilized by nitrogen-containing organic molecules can be applied for expedite one-step preparation of highly dispersed oxides, as exemplified by synthesis of titania photocatalysts.

36 MATERIALS SCIENCE↗

Generation of sub-100-fs Stokes pulses upon SRS in a barium nitrate crystal

72-fs pulses are generated at the first Stokes component frequency upon stimulated Raman scattering in a barium nitrate crystal for the radiation of the Ti{sup 3+}:Al{sub 2}O{sub 3} laser with the pulse duration of 50 fs. The energy efficiency of conversion is 20%. The barium nitrate crystal was optically pumped by two consecutive orthogonally polarised chirped pulses with the following time compression of the Stokes radiation pulse. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal structures of copper(II) and nickel(II) nitrate and chloride complexes with 4-bromo-2-[(2-hydroxyethylimino)-methyl]phenol

The crystal structures of {l_brace}4-bromo-2-[(2-hydroxyethylimino)-methyl]phenolo{r_brace}aquacopper(II) nitrate hemihydrate (I), chloro-{l_brace}4-bromo-2-[(2-hydroxyethylimino)-methyl]phenolo{r_brace}copper hemihydrate (II), and chloro-{l_brace}4-bromo-2-[(2-hydroxyethylimino)-methyl]phenolo{r_brace}aquanickel (III) are determined using X-ray diffraction. Crystals of compound I are formed by cationic complexes, nitrate ions, and solvate water molecules. In the cation, the copper atom coordinates the singly deprotonated molecule of tridentate azomethine and the water molecule. The copper complexes are joined into centrosymmetric dimers by the O{sub w}-H...O hydrogen bonds. The crystal structure of compound II is composed of binuclear copper complexes and solvate water molecules. The copper atom coordinates the O,N,O ligand molecule and the chlorine ion, which fulfills a bridging function. The coordination polyhedron of the metal atom is a distorted tetragonal bipyramid in which the vertex is occupied by the chlorine atom of the neighboring complex in the dimer. Compound III is a centrosymmetric dimer complex. The coordination polyhedra of two nickel atoms related via the inversion center are distorted octahedra shared by the edge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nitrate Conversion of HB-Line Reillex™ HPQ Resin

Reillex™ HPQ ion exchange resin is used by HB Line to remove plutonium from aqueous streams. Reillex™ HPQ resin currently available from Vertellus Specialties LLC is a chloride ionic form, which can cause stress corrosion cracking in stainless steels. Therefore, HB Line Engineering requested that Savannah River National Laboratory (SRNL) convert resin from chloride form to nitrate form in the Engineering Development Laboratory (EDL). To perform this task, SRNL treated two batches of resin in 2012. The first batch of resin from Reilly Industries Batch 80302MA was initially treated at SRNL in 2001 to remove chloride. This batch of resin, nominally 30 liters, has been stored wet in carboys since that time until being retreated in 2012. The second batch of resin from Batch 23408 consisted of 50 kg of new resin purchased from Vertellus Specialties in 2012. Both batches were treated in a column designed to convert resin using downflow of 1.0 M sodium nitrate solution through the resin bed followed by rinsing with deionized water. Both batches were analyzed for chloride concentration, before and after treatment, using Neutron Activation Analysis (NAA). The resin specification [Werling, 2003] states the total chlorine and chloride concentration shall be less than 250 ppm. The resin condition for measuring this concentration is not specified; however, in service the resin would always be fully wet. Measurements in SRNL showed that changing from oven dry resin to fully wet resin, with liquid in the particle interstices but no supernatant, increases the total weight by a factor of at least three. Therefore, concentration of chlorine or chloride expressed as parts per million (ppm) decreases by a factor of three. Therefore, SRNL recommends measuring chlorine concentration on an oven dry basis, then dividing by three to estimate chloride concentration in the fully wet condition. Chloride concentration in the first batch (No.80302MA) was nearly the same before the current treatment (759 ppm dry) and after treatment (745 ppm dry or ~248 ppm wet). Treatment of the second batch of resin (No.23408) was very successful. Chloride concentration decreased from 120,000 ppm dry to an average of 44 ppm dry or ~15ppm wet, which easily passes the 250 ppm wet criterion. Per guidance from HB Line Engineering, SRNL blended Batch 80302 resin with Batch P9059 resin which had been treated previously by ResinTech to remove chloride. The chloride concentrations for the two drums of Batch P9059 were 248 ppm dry (~83 ppm wet) ±22.8% and 583 ppm dry (~194 ppm wet) ± 11.8%. The blended resin was packaged in five gallon buckets.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Engineering Options Assessment Report. Nitrate Salt Waste Stream Processing

This report examines and assesses the available systems and facilities considered for carrying out remediation activities on remediated nitrate salt (RNS) and unremediated nitrate salt (UNS) waste containers at Los Alamos National Laboratory (LANL). The assessment includes a review of the waste streams consisting of 60 RNS, 29 above-ground UNS, and 79 candidate below-ground UNS containers that may need remediation. The waste stream characteristics were examined along with the proposed treatment options identified in the Options Assessment Report . Two primary approaches were identified in the five candidate treatment options discussed in the Options Assessment Report: zeolite blending and cementation. Systems that could be used at LANL were examined for housing processing operations to remediate the RNS and UNS containers and for their viability to provide repackaging support for remaining LANL legacy waste.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Uranyl Nitrate Complex Extraction into TBP/Dodecane Organic Solution: A Molecular Dynamics Study

Liquid liquid extraction of uranyl is studied by conducting atomistic molecular dynamics simulation using quantum chemistry calibrated force fields via restrained electrostatic potential fitting of atomic forces. The simulations depict the migration of uranyl nitrate complexes from the aqueous organic interface into the tri-n-butyl phosphate (TBP)/dodecane organic phase, in the form of UO2(NO3)2H2O2TBP and UO2(NO3)2*3TBP. The migration process is characterized by the gradual breaking of all the hydrogen bonds between the complex and the water molecules at the interface. Moreover, our simulation results suggest that the experimentally observed complex UO2(NO3)2*2TBP is formed after the migration of the aforementioned complexes into the organic phase by means of a reorganization of the nitrate binding mode from mono to bidentate which removes the excess oxygen atoms bound to uranyl.

08 HYDROGEN↗

Critical Roles of Chalcogenide Anion on Strengthening Stability of Ni 2 Mo 6 Te 8 for Almost Exclusive Electrocatalysts Nitrate to Ammonia Conversion

Electrochemical hydrogenation of nitrate to ammonia using renewable electricity is a promising route for sustainability but lacks catalysts that can deliver balanced selectivity, activity, and durability. For this work, a new family of noble metal-free and high-performing Chevrel phase Ni 2 Mo 6 T 8 (T = S, Se, and Te) catalysts that have similar structural and textural properties and differ presumably only in chalcogenide anion is systematically studied. The side-by-side comparisons allow the uncovering of the critical roles of chalcogenide anions in impacting kinetic activities and long-term durability. The incorporation of anions with larger size and smaller electronegativity from sulfide to selenide and telluride invokes stronger inhibition of the otherwise competing hydrogen evolution reaction (HER) and steers the hydrogenation toward the selective formation of ammonia, thus improving both Faradic selectivity and the turnover frequency to high levels of 99.4% and 21.5 s –1 , respectively, on the Ni 2 Mo 6 Te 8 catalyst. More significantly, the bulkier anion in the Ni 2 Mo 6 T 8 catalyst kinetically inhibited the intercalation of electrolyte cations, a major degradation mechanism in the catalyst family examined here and delivered several times improved durability. Therefore, this study introduces novel active motifs for selective nitrate reduction and provides insights into the catalyst degradation mechanism and practical ways to improve durability.

36 MATERIALS SCIENCE↗

Synergizing Fe 2 O 3 Nanoparticles on Single Atom Fe‐N‐C for Nitrate Reduction to Ammonia at Industrial Current Densities

The electrochemical reduction of nitrates (NO 3 − ) enables a pathway for the carbon neutral synthesis of ammonia (NH 3 ), via the nitrate reduction reaction (NO 3 RR), which has been demonstrated at high selectivity. However, to make NH 3 synthesis cost-competitive with current technologies, high NH 3 partial current densities (j NH3 ) must be achieved to reduce the levelized cost of NH 3 . Here, the high NO 3 RR activity of Fe-based materials is leveraged to synthesize a novel active particle-active support system with Fe 2 O 3 nanoparticles supported on atomically dispersed Fe–N–C. The optimized 3×Fe 2 O 3 /Fe–N–C catalyst demonstrates an ultrahigh NO 3 RR activity, reaching a maximum j NH3 of 1.95 A cm −2 at a Faradaic efficiency (FE) for NH 3 of 100% and an NH 3 yield rate over 9 mmol hr −1 cm −2 . Operando XANES and post-mortem XPS reveal the importance of a pre-reduction activation step, reducing the surface Fe 2 O 3 (Fe 3+ ) to highly active Fe 0 sites, which are maintained during electrolysis. Durability studies demonstrate the robustness of both the Fe 2 O 3 particles and Fe–N x sites at highly cathodic potentials, maintaining a current of −1.3 A cm −2 over 24 hours. This work exhibits an effective and durable active particle-active support system enhancing the performance of the NO 3 RR, enabling industrially relevant current densities and near 100% selectivity.

active support↗

The Reactivity of the Nitrate Radical ( • NO 3 ) in Aqueous and Organic Solutions

In this study, rate constants for the ( • NO 3 ) radical reaction with alcohols, alkanes, alkenes and several aromatic compounds were measured in aqueous and tert-butanol solution for comparison to aqueous and acetonitrile values from the literature. The measured trends provide insight into the reactions of the • NO 3 radical in various media. The reaction with alcohols primarily consists of hydrogen-atom abstraction from the alpha-hydroxy position, and is faster in solvents of lower polarity where the diffusivity of the radical is greater. Alkenes react faster than alkanes, and their rate constants are also faster in non-polar solution. The situation is reversed for nitrate radical reaction with the aromatic compounds, where the rate constants in tert-butanol are slower. This is attributed to the need to solvate the NO 3 - anion and corresponding tropylium cation produced by the • NO 3 radical electron transfer reaction. Finally, a linear correlation was found between measured rate constants in water and acetonitrile, which can be used to estimate aqueous nitrate radical rate constants for compounds having low water solubility.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Photocatalytic Nitrate Destruction Studies in Complex Environments

One method for denitration of nitric acid used in nuclear facilities is to use formic acid as a reductant. The major problem with formic acid denitration is an induction period of varying duration that may result in excessive accumulation of formic acid at the reaction onset. This accumulation poses an off-gas process control issue. In this talk, we will describe the use of titaniabased photocatalysts for the treatment of nitric acid and nitrate wastes. We find that the photocatalytic process is a simple and straightforward method to completely destroy nitrate ions at room temperature without any initiation period.

nanomaterials↗

Impact of nitrate on the redox chemistry and solubility of Tc(IV) in alkaline, dilute to concentrated aqueous NaCl solutions

Here, the impact of nitrate on the redox behaviour and solubility of 99 Tc(IV) was investigated in 0.1–5.0 M NaCl–NaNO 3 –NaOH solutions with 0.1 M ≤ [NO 3 – ] ≤ 1.0 M and 8.5 ≤ pH m ≤ 14.5 (with pH m = –log [H + ]) in the presence or absence of reducing agents (as Fe powder, Na 2 S 2 O 4 , Sn(II)). The evolution of the redox conditions as a function of time (for t ≤ 450 days) was investigated: (i) in the absence of technetium (inactive samples), (ii) in the presence of 99 Tc(IV) (added as 1–2 mg of TcO 2 ∙0.6H 2 O(am)), and (iii) in the presence of 137 Cs(I) (and absence of 99 Tc). All experiments were conducted in an Ar-glovebox (O 2 < 1 ppm) at T = (22 ± 2) °C. An improved understanding of Tc redox processes in nitrate-rich alkaline solutions is relevant to predict Tc behaviour in specific nuclear waste disposal scenarios and a topic of fundamental scientific interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel nitric oxide generating compound glycidyl nitrate enhances the therapeutic efficacy of chemotherapy and radiotherapy

Highlights: • Glycidyl nitrate (GLYN) is a NO generating small molecule and has ability to release NO on bioactivation in tumor cells. • GLYN-induced intracellular NO generation was attenuated by NO scavengers. • GLYN increases tumor blood flow in tumor-bearing animal model. • GLYN significantly increased the anti-tumor efficacy of cisplatin and radiation therapy in mice. • GLYN is well tolerated with no obvious systemic toxicities at its effective therapeutic doses in preclinical animal studies. - Abstract: Selective release of nitric oxide (NO) in tumors could improve the tumor blood flow and drug delivery for chemotherapeutic agents and radiotherapy, thereby increasing the therapeutic index. Glycidyl nitrate (GLYN) is a NO generating small molecule, and has ability to release NO on bioactivation in SCC VII tumor cells. GLYN-induced intracellular NO generation was significantly attenuated by NO scavenger carboxy-PTIO (cPTIO) and NAC. GLYN significantly increases tumor blood flow, but has no effect on the blood flow of normal tissues in tumor-bearing mice. When used with cisplatin, GLYN significantly increased the tumor growth inhibition effect of cisplatin. GLYN also had a modest radiosensitizing effect in vitro and in vivo. GLYN was well tolerated and there were no acute toxicities found at its effective therapeutic doses in preclinical studies. These results suggest that GLYN is a promising new drug for use with chemotherapy and radiotherapy, and provide a compelling rationale for future studies of GLYN and related compounds.

60 APPLIED LIFE SCIENCES↗

Nitrate removal from water using electrostatic regeneration of functionalized adsorbent

Nitrate is an important pollutant in drinking water worldwide, and a number of methods exist for its removal from water including ion exchange and reverse osmosis. However, these approaches suffer from a variety of disadvantages including requirements for supply and disposal of brine used for regeneration in ion exchange and low water recovery ratio for reverse osmosis. We demonstrate the use of high surface area activated carbon electrodes functionalized with moieties having high affinity for adsorption of nitrate from aqueous solution, such as those used in ion exchange. Adsorption of surfactant molecules having a quaternary amine ionic group to the activated carbon surfaces provides functionalization of the surfaces without complex chemistries. The functionalized electrodes have adsorption capacities of about 80 mg NO 3 - per gram of activated carbon material. Unlike a traditional ion exchanger, the functionalized surfaces can be repeatedly regenerated by the application of an electrostatic potential which displaces the bound NO 3 - while leaving an excess of electronic charge on the electrode. The cell is completed by a counter electrode passing current via Faradaic reactions during regeneration. The proposed system is a hybrid form of capacitive deionization, wherein one electrode is strongly capacitive and the counter electrode is dominated by Faradaic reactions. Up to approximately 40% of the initial capacity of the electrode is accessible following electrical regeneration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sponge-like silver obtained by decomposition of silver nitrate hexamethylenetetramine complex

Silver nitrate hexamethylenetetramine [Ag(NO{sub 3})·N{sub 4}(CH{sub 2}){sub 6}] coordination compound has been prepared via aqueous route and characterized by chemical analysis, XRD and electron microscopy. Decomposition of [Ag(NO{sub 3})·N{sub 4}(CH{sub 2}){sub 6}] under hydrogen and under inert has been studied by thermal analysis and mass spectrometry. Thermal decomposition of [Ag(NO{sub 3})·N{sub 4}(CH{sub 2}){sub 6}] proceeds in the range 200–250 °C as a self-propagating rapid redox process accompanied with the release of multiple gases. The decomposition leads to formation of sponge-like silver having hierarchical open pore system with pore size spanning from 10 µm to 10 nm. The as-obtained silver sponges exhibited favorable activity toward H{sub 2}O{sub 2} electrochemical reduction, making them potentially interesting as non-enzyme hydrogen peroxide sensors. - Graphical abstract: Thermal decomposition of silver nitrate hexamethylenetetramine coordination compound [Ag(NO{sub 3})·N{sub 4}(CH{sub 2}){sub 6}] leads to sponge like silver that possesses open porous structure and demonstrates interesting properties as an electrochemical hydrogen peroxide sensor. Display Omitted - Highlights: • [Ag(NO{sub 3})·N{sub 4}(CH{sub 2}){sub 6}] orthorhombic phase prepared and characterized. • Decomposition of [Ag(NO{sub 3})·N{sub 4}(CH{sub 2}){sub 6}] leads to metallic silver sponge with opened porosity. • Ag sponge showed promising properties as a material for hydrogen peroxide sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of fuel to nitrates ratio on the properties of FeCr{sub 2}O{sub 4} nanopowders

Highlights: • Single phase spinel FeCr{sub 2}O{sub 4} nanopowders were formed without further heat treatment based on powder X-ray diffraction, FTIR and EDS studies. • The probable combustion mechanism with thermodynamic concepts involved in the formation of FeCr{sub 2}O{sub 4} nanopowders were discussed. • The effect of different amount of fuel to metal nitrates ratio (F/N) on the self-combusted FeCr{sub 2}O{sub 4} nanopowders was investigated. • It greatly affects the morphologies, different nanocrystallite sizes, and magnetic properties by using different combinations of F/N ratios. - Abstract: The solution combustion of spinel type FeCr{sub 2}O{sub 4} nanopowders via different ratios of fuel to stating metal nitrates was investigated. The synthesized FeCr{sub 2}O{sub 4} nanopowders were deemed to be single phase spinel type material based on powder X-ray diffraction, FTIR and EDS studies. The properties of synthesized FeCr{sub 2}O{sub 4} nanopowders such as morphology, porosity, elemental composition, crystallite size, strain and lattice deformations, magnetic moment, and coercivity were influenced by the amount of the fuel used in the combustion process. FeCr{sub 2}O{sub 4} nanopowders with different morphologies, porosities, structural, and magnetic properties could be prepared in a single procedure on a hotplate magnetic stirrer without the need for high temperature furnaces.

36 MATERIALS SCIENCE↗

High-throughput screening to predict highly active dual-atom catalysts for electrocatalytic reduction of nitrate to ammonia

Ammonia is an essential chemical owing to its importance in fertilizer production and other industrial applications. Electrocatalytic nitrate reduction to ammonia (NO 3 RR) holds great promise for low-temperature ammonia production while simultaneously addressing nitrate-based environmental concerns. To provide the mechanistic understanding needed to design an effective electrocatalyst, we systematically investigated the catalytic performance of metal-based dual-atom catalysts (DACs) anchored on two-dimensional (2D) expanded phthalocyanine (Pc) for NO 3 RR. We found that NO 3 RR can efficiently produce ammonia on Cr 2 -Pc, V 2 -Pc, Ti 2 -Pc, and Mn 2 -Pc surfaces with low limiting potentials of – 0.02, – 0.25, – 0.34, and – 0.41 V RHE , respectively. Moreover, using the free energy difference of *NO 3 - and *H as a descriptor, we found that the hydrogen evolution reaction is significantly suppressed on the DAC surface due to an ensemble effect in which the two metal atoms cooperate to selectively form ammonia. We performed high-throughput screening to develop an efficient metal-based DAC for NO 3 - reduction, followed by a mechanistic study to elucidate the NO3RR pathway on the DAC. Finally, this work provides design information for advancing sustainable ammonia synthesis under ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗