Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Morphological”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Origin of outer rings in lunar multi-ringed basins - Evidence from morphology and ring spacing

The reported investigation has the objective to examine both the morphology and morphometry of several of the freshest lunar basins including Orientale, Imbrium, Nectaris, Crisium, and Humorum, and to compare the characteristics of their three most prominent rings to features in smaller craters. On the basis of comparisons it is concluded that the outer basin ring forms within the region where significant structural uplift of the basin rim is to be expected. Therefore the formation of the outer ring scarp may be closely associated with structural uplift of the inner portion of the crater rim flank. According to a model suggested for the origin of the outer two rings, the cratering event formed two inner rings, a central peak ring, and an uplifted crater rim crest, with deposition of ejecta during the process.

Head, J. W.↗
NASA NTRS1978

Morphology and elemental composition analysis by size of rocket particulate effluent

Particulate samples collected on six stages of a quartz crystal microbalance cascade impactor mounted in an aircraft traversing the plume of a large solid-fueled rocket are analyzed, postflight, by scanning electron microscopy (SEM) and energy dispersed X-ray (EDXRA). The results indicate the morphology and elemental composition of the particles fall into several distinct groups. Those larger than about 0.5 micron in diameter and nearly spherical in shape contain, among elements with atomic numbers of 11 and higher, only aluminum, suggesting they are aluminum oxide formed in the solid rocket fuel combustion. Still larger but less symmetrical particles contain only sodium and chlorine. Particles much smaller than 0.5 micron seem to end up as agglomerates after impaction (or during the impaction process), and show a complex elemental make-up of Na, Al, S, Cl, K, Ca, Fe and Zn. The unagglomerated single particles smaller than 0.2 micron, on the other hand, show no evidence of elements above atomic number 11 at all, suggesting they may be carbon or hydrocarbon particles.

Chuan, R. L.↗
NASA NTRS1978

Sublimate morphology on 74001 and 74002 orange and black glassy droplets

SEM-EDX analysis of the surface morphology of the 74001 and 74002 orange and black glassy droplets has revealed the presence of ubiquitous micromound coatings. Assuming that the diameter of an individual micromound is an indication of total coating thickness, then the thickness of this volatile and metal-rich layer ranges from less than 20 A to over 300 A in thickness. On rare droplets the micromound coating is partially covered by a sparse population of crystals and masses that are essentially NaCl in composition. Additionally, an irregular mass on the surface of one black droplet may contain free sulfur. Amoeboid masses of iron, some with incipient crystal faces, are also present on a few droplet surfaces. The above features, i.e., halite crystals, sulfur-rich masses and amoeboid iron, are rare; the more common occurrence of metals and volatiles is in the micromound coating. Based on our observations of several hundred spheres from both Apollo and Luna missions, the classic micromound coating is unique to the Apollo 15 green and Apollo 17 orange and black droplets. Although some investigators have proposed various impact sequences to produce these unique droplets, the volcanic fire fountain origin is favored.

Clanton, U. S.↗
NASA NTRS1980

Tribological properties of sputtered MoS sub 2 films in relation to film morphology

Thin sputter deposited MoS2 films in the 2000 to 6000 A thickness range have shown excellent lubricating properties, when sputtering parameters and substrate conditions are properly selected and precisely controlled. The lubricating properties of sputtered MoS2 films are strongly influenced by their crystalline-amorphous structure, morphology and composition. The coefficient of friction can range from 0.04 which is effective lubrication to 0.4 which reflects an absence of lubricating properties. Visual screening and slight wiping of the as-sputtered MoS2 film can identify the integrity of the film. An acceptable film displays a black-sooty surface appearance whereas an unacceptable film has a highly reflective, gray surface and the film is hard and brittle.

Spalvins, T.↗
NASA NTRS1979

Central peaks in lunar craters - Morphology and morphometry

Fresh lunar craters with diameters from 17 to 175 km are found to display a linear relationship between the central peak morphology and morphometry and such critical crater parameters as rim crest diameter, floor diameter, and substrate. Some other previously established linear relationships have been cited as evidence that floor diameter, peak height, and peak ring diameter are related to the kinetic energy of impact. The two new relations derived in the present work would therefore indicate that the central peaks, too, are related to the kinetic energy of impact, and probably begin to form early in the cratering event as suggested by Milton and Roddy (1972) and Head (1978). There seems to be no obvious reason to expect such linear relationships between central peak diameter and rim crest and floor diameter if the peaks are formed by gravity induced failure of the transient cavity, as suggested by Dence et al. (1968).

Hale, W.↗
NASA NTRS1979

Martian channel morphology - Maja and Kasei Valles

Detailed geomorphic mapping from Viking imagery of selected portions of Kasei Vallis, Maja Vallis, and vicinity reveals numerous similarities of channel morphology to erosional and depositional features of the Channeled Scabland. Characteristic scabland landforms which occur in Kasei and Maja Valles include erosional grooves, streamlined uplands and hills, scour zones around flow obstacles, inner channels with erosional head cuts, breached ridges and basin (crater) rims, pendant forms (bars), erosional terracing of streamlined hills and channel margins, and possible midchannel bars. These features constitute an assemblage of landforms which on earth is most characteristic of catastrophic flood channeling in jointed bedrock. Prominent mass wastage and sapping features are associated with the high-wall relief in lower Kasei Vallis. Many cliffs along the channel margins exhibit steep upper slopes and gentler lower talus slopes which form the spur-and-gully topography that has also been described along chasma walls in the Valles Marineris. Landslides, debris fans, and debris cones can also be recognized. Much less wall modification occurs in the shallower Maja Vallis. Probably, the steep escarpments of Kasei were created by tectonic processes and subsequent channel incision. These escarpments later receded by mass wasting and sapping.

Baker, V. R.↗
NASA NTRS1979

Martian fluidized crater morphology - Variations with crater size, latitude, altitude, and target material

The paper investigates the influence of crater latitude, target material, and elevation on the morphology of the ejecta facies and crater interiors as a function of crater diameter. It is shown that only pancake craters exhibit latitudinal variation in their distribution. It is also shown that several crater types are associated with specific target materials: radial textured craters are found primarily on Tharsis and Elysium lavas, and pancake craters are found on fractured terrain, old lavas, and channel materials. Craters formed on recent lavas more frequently possess secondary craters, central peaks, and terraces than primary craters found on other geological units. The maximum radial extent of fluidized ejecta is demonstrated to be a function of crater altitude and latitude.

Mouginis-Mark, P.↗
NASA NTRS1979

Morphology and distribution of common 'sand' dunes on Mars - Comparison with the earth

A comparative study of Martian and terrestrial dunes was made based on Viking Orbiter pictures and aerial pictures of terrestrial deserts. The morphological similarity between the Martian dunes and terrestrial crescentic dunes implies that the dynamics of dune formation are similar on the two planets, despite Martian constraints on dune formation that include much higher velocity winds required to move 'sand' in saltation, the possible inhibition of sand movement by absorbed water vapor, the seasonal 'snow' cover in the north circumpolar erg, and a probably sparse sand supply. The absence of longitudinal dunes and the restriction of massive crescentic dunes to a few sites on Mars suggests that Mars may have a long eolian history in which much of the sand suitable for saltation has already been transported to the north polar erg and crater floor fields.

Breed, C. S.↗
NASA NTRS1980

Tribological properties of sputtered MoS2 films in relation to film morphology

Thin sputter-deposited MoS2 films with thicknesses ranging from 2000 to 6000 A have shown excellent lubricating properties when sputtering parameters and substrate conditions are properly selected and controlled. The lubricating properties are strongly influenced by the crystalline-amorphous structure, morphology, and composition of the films. The coefficient of friction can range from 0.04 (which is effective lubrication) to 0.4 (no lubricating action).

Spalvins, T.↗
NASA NTRS1980

Structures far from the head of comet Kohoutek. II - A discussion of the Swan Cloud of January 11 and of the general morphology of cometary plasma tails

Photographs show that the 'Swan Cloud' observed in comet Kohoutek on January 11, 1974 was an advanced stage of a plasma tail disconnection event, of which the rejected tail appeared to decelerate as it receded from the head. The event commenced with the development of strong tail ray activity followed by the actual tail disconnection, the merging of the disconnected tail with the new tail to form the Swan and the formation of arcade loops in the space between closing tail rays. The observed morphological sequence is easily understood in the sector boundary model (Niedner et al., 1978), and the arcade loops are proposed to be reconnected flux tubes between oppositely polarized tail rays in the incipient new tail which followed the disconnection

Niedner, M. B., Jr.↗
NASA NTRS1980

The relationships between high-latitude convection reversals and the energetic particle morphology observed by Atmosphere Explorer

A statistical investigation and a case study of simultaneous particle and ion convection velocity measurements from Atmosphere Explorer are presented. They show that at all local times between 1800 and 0600 hours the gross convection reversal boundary lies equatorward of the boundary between the discrete, highly structured boundary plasma sheet precipitation and the polar rain. This study indicates the existence of shear and rotational convection reversals on closed field lines; the observed morphology is consistent with a partially closed magnetosphere in which some portion of convection electric field is generated in the low-latitude boundary layer.

Heelis, R. A.↗
NASA NTRS1981

The fracture morphology of nickel-base superalloys tested in fatigue and creep-fatigue at 650 C

The fracture surfaces of compact tension specimens from seven nickel-base superalloys fatigue tested at 650 C were studied by scanning electron microscopy and optical metallography to determine the nature and morphology of the crack surface in the region of stable growth. Crack propagation testing was performed as part of an earlier study at 650 C in air using a 0.33 Hz fatigue cycle and a creep-fatigue cycle incorporating a 900 second dwell at maximum load. In fatigue, alloys with a grain size greater than 20 micrometers, HIP Astroloy, Waspaloy, and MERL 76, exhibited transgranular fracture. MERL 76 also displayed numerous fracture sites which were associated with boundaries of prior powder particles. The two high strength, fine grain alloys, IN 100 and NASA IIB-7, exhibited intergranular fracture. Rene 95 and HIP plus forged Astroloy displayed a mixed failure mode that was transgranular in the coarse grains and intergranular in the fine grains. Under creep-fatigue conditions, fracture was found to be predominantly intergranular in all seven alloys.

Gayda, J.↗
NASA NTRS1980

Morphology and spatial distribution of XUV and X-ray emissions in an active region observed from Skylab

The morphology and spatial distribution of loops in an active region observed from Skylab are described. The active region loops were classified into hot loops with temperatures of 2 to 3 million K observed in coronal lines and X-rays, and cool loops with temperatures of 500,000 to one million K observed in transition zone lines. The brightest hot coronal loops in the active region are predominantly low-lying, compact, closely-packed, showing greater stability than the transition-zone loops, which are fewer in number, are large, and slender. The observed aspect ratio of the hot coronal loops in the range of 0.1 and 0.2 are almost two orders of magnitude larger than those of the Ne VII loops.

Cheng, C.-C.↗
NASA NTRS1980

Cloud morphology and motions from Pioneer Venus images

The horizontal and vertical cloud structures, atmospheric waves, and wind velocities at the cloud top level were determined by the Pioneer Venus photopolarimeter images in the UV from January through March 1979. The images indicate long-term evolution of cloud characteristics, the atmospheric dynamics, and rapid small changes in cloud morphology. The clouds show a globally coordinated oscillation relative to latitude circles; retrograde zonal winds of 100 m/s near the equator are determined from the tracking of small-scale cloud properties, but two hemispheres show important variations. The zonal wind velocity in the southern hemisphere is reduced toward the poles at a rate similar to solid body rotation; the midlatitude jet stream noted by Mariner 10 is not observed.

Rossow, W. B.↗
NASA NTRS1981

Chemical and morphological characteristics of lithium electrode surfaces

Lithium electrode surfaces were analyzed for chemical and morphological characteristics, using electron spectroscopy chemical analysis (ESCA) and scanning electron microscopy (SEM). Samples included lithium metal and lithium electrodes which were cycled in a 1.5 M lithium arsenic hexafluoride/two-methyl tetrahydrofuran electrolyte. Results show that the surface of the as-received lithium metal was already covered by a film composed of LiO2 and an Li2O/CO2 adduct with a thickness of approximately 100-200 A. No evidence of Ni3 was found. Upon exposure of the lithium electrode to a 1.5 M LiAsF6/2-Me-THF electrochemical environment, a second film was observed to form on the surface, consisting primarily of As, Si, and F, possibly in the form of lithium arsenic oxyfluorides or lithium fluorosilicates. It is suggested that the film formation may be attributed to salt degradation.

Yen, S. P. S.↗
NASA NTRS1981

Sco X-1 - A galactic radio source with an extragalactic radio morphology

VLA observations of radio emissions at 1465 and 4885 MHz, of Sco X-1 confirm the existence of a colinear triple structure. Evidence that the three components of Sco X-1 are physically associated is presented, including the morphology, spectrum, variability, volume emissivity and magnetic field strength. The possibility of a physical phenomenon occurring in Sco X-1 similar to that occurring in extragalactic radio sources is discussed, and two galactic sources are found having extended emission similar to that in extragalactic objects. The extended structure of Sco X-1 is also observed to be similar to that of the hot spots in luminous extragalactic sources, and a radio source 20 arcmin from Sco X-1 is found to lie nearly along the radio axis formed by the components of Sco X-1.

Geldzahler, B. J.↗
NASA NTRS1981

Mechanism and models for zinc metal morphology in alkaline media

Based on experimental observations, a mechanism is presented to explain existence of the different morphologies of electrodeposited zinc in alkaline solution. The high current density dendrites appear to be due to more rapid growth on the nonbasal crystallographic planes than on the basal plane. The low current density moss apparently results from dissolution from the nonbasal planes at low cathodic voltages. Electrochemical models were sought which would produce such a phenomenon. The fundamental plating mechanism alone accounts only for different rates on different planes, not for zinc dissolution from a plane in the cathodic region. Fourteen models were explored; two models were in accord with the proposed mechanism. One involves rapid disproportionation of the zinc +1 species on the nonbasal planes. The other involves a redox reaction (corrosion) between the zinc-zincate and hydrogen-water systems.

May, C. E.↗
NASA NTRS1982

An intense, quasi-steady thunderstorm over mountainous terrain. II - Doppler radar observations of the storm morphological structure

The morphological characteristics of mean storm-scale airflow patterns of an intense quasi-steady storm formed in South Park, Colorado are described. Vertical transport of northerly low-level momentum within the updraft imparted a significant blocking on mid-level flow with southerly momentum. The blocking affected the movement and characteristics of adjacent, less organized storms, and additional storm-environment interactions produced an organized recirculation of precipitation particles from the mid-level updraft to the low-level updraft. The steadiness of the storm is found to have depended on the introduction of low-level flow directed opposite to mid-level flow, and on the formation of persistent downdrafts of sufficient magnitude to sustain an active gust front.

Knupp, K. R.↗