Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mineralogy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Surface chemistry and mineralogy

The accumulated knowledge on the chemistry and mineralogy of Martian surface materials is reviewed. Pertinent information obtained by direct analyses of the soil on Mars by the Viking Landers, by remote sensing of Mars from flyby and orbiting spacecraft, by telescopic observations from earth, and through detailed analyses of the SNC meteorites presumed to be Martian rocks are summarized and analyzed. A compositional model for Mars soil, giving selected average elemental concentrations of major and trace elements, is suggested. It is proposed that the fine surface materials on Mars are a multicomponent mixture of weathered and nonweathered minerals. Smectite clays, silicate mineraloids similar to palagonite, and scapolite are suggested as possible major candidate components among the weathered minerals.

Banin, A.↗
NASA NTRS1993

Impact mineralogy and chemistry of the cretaceous-tertiary boundary at DSDP site 576

We have identified the K/T boundary in pelagic clay sediments from cores at DSDP Site 576 in the western North Pacific. Detailed geochemical and trace mineralogical analyses of this boundary section are in progress and initial results indicate similarities and differences relative to the only other clay core investigated in detail; DSDP Site 596, a locality in the western South Pacific. Peak Ir concentrations of 13 ng/g in DSDP Hole 576B are virtually identical with those observed in the South Pacific, but in the North Pacific this peak is much narrower and the integrated Ir fluence of 85 ng cm(exp -2) is 4 times lower (320 in Hole 596). Of the 34 elements measured, only Ir and Cr were found to have anomalous concentrations in K/T boundary samples. Trace mineral residues were obtained by washing away clays and sequential chemical leaches (including HF) to remove typical hydrogenous and biogenous sediment components (e.g., zeolites and radiolarian opal). We attempted to quantitatively recover the entire trace mineral assemblage for grains greater than 30 micrometers in diameter. Our mineral residues were dominated by two phases: quartz and magnesioferrite spinel. Other non-opaque mineral grains we have positively identified were trace K-feldspar, plagioclase, corundum, and muscovite. Of these only K-feldspar exhibited planar deformation features (PDF). We have not found abundant plagioclase, as in the South Pacific suggesting that this phase was either not preserved in the North Pacific, or that in the south, it has a non-impact (i.e., volcanic) source. PDF in quartz were commonly obscured by secondary overgrowths on the surfaces of quartz grains, presumably from diagenetic reprecipitation of silica dissolved from opaline radiolarian tests that are common in these sediments. However, careful examination revealed that most grains had multiple sets of PDF. Of the 133 quartz grains greater than 30 micrometers analyzed, 62 percent showed evidence of shock. The largest shocked grain recovered to date had a maximum diameter of 160 micrometers, consistent with other sites in the Pacific.

Bostwick, Jennifer A.↗
NASA NTRS1993

Moessbauer spectrometer for mineralogical analysis of the Mars surface: Moessbauer source considerations

Development of space rocketry and cosmic instrument making has made it possible to create interplanetary stations to be sent to the solar system bodies. In the last decade of the century the planet Mars will be in the focus of planetary science problems. Russia, USA (the NASA) and Europe (the ESA) plan to do a new step in the study of the planetary system by spacecraft missions to Mars. One part of the programs of these missions is Martian surface measurements of iron, which is a dominant element in both the Martian soil and rocks (about 13 percent by weight). The chemistry of iron in space is strongly coupled to the chemistry of abundant elements (to begin with hydrogen, carbon, oxygen) and it is this coupling of chemical cycles of abundant elements that gives us the possibility of understanding some features of the chemical evolution of matter. In this connection of extremely great importance for the understanding of the evolution of the solar system are the oxidation state of the iron and its mineral composition of the Mars surface. Being highly successful, the Viking landers had no instrumentation to answer these questions. Such instrumentation has to be specifically sensitive to mineralogy. For this purpose the back scattering Moessbauer spectrometer (MS-96) was proposed to be installed on a rover to be launched on board the Russian spacecraft Mars-96 mission to Mars. Due to power and mass restrictions three systems of the device MS-96 (velocity transducer, detector and electronic components) have been extremely miniaturized in comparison to a standard system. In this paper we intend to place for consideration a radioactive source to find out what characteristics it should have to be suitable for purposes of the experiment.

Evlanov, E. N.↗
NASA NTRS1993

A Moessbauer spectrometer for the mineralogical analysis of the Mars surface: First temperature dependent tests of the detector and drive system

Part of the scientific payload of the Mars-96 mission is a Fe-(57)Mossbauer (MB) spectrometer installed on a small rover to be placed on the surface of Mars. The instrument is under development at the University of Darmstadt. This instrument, with some modifications, is also included in the scientific payload of the proposed MARSNET mission of the European Space Agency (ESA). A similar instrument is currently under development in the US. The reason for developing a Mossbauer spectrometer for space applications is the high abundance of the element iron, especially on the surface of Mars. The elemental composition of Martian soil was determined during the Viking mission in 1976 but not it's mineralogical composition. One believes that it is composed mainly of iron-rich clay minerals, with an iron content of about 14 (plus or minus 2) wt-percent, partly magnetic. Of extremely great interest are the oxidation state of the iron, the magnetic phases and the mineral composition of the Mars surface. To these questions MB spectroscopy can provide important information, which are not available by other methods. We report on first tests of the experimental setup in the temperature range plus 20 C to -70 C, roughly corresponding to the temperature range on the surface of Mars. Also questions concerning the signal/noise ratio (S/N) are discussed.

Held, P.↗
NASA NTRS1992

Mapping the mineralogy and lithology of Canyonlands, Utah with imaging spectrometer data and the multiple spectral feature mapping algorithm

The sedimentary sections exposed in the Canyonlands and Arches National Parks region of Utah (generally referred to as 'Canyonlands') consist of sandstones, shales, limestones, and conglomerates. Reflectance spectra of weathered surfaces of rocks from these areas show two components: (1) variations in spectrally detectable mineralogy, and (2) variations in the relative ratios of the absorption bands between minerals. Both types of information can be used together to map each major lithology and the Clark spectral features mapping algorithm is applied to do the job.

Clark, Roger N.↗
NASA NTRS1993

Mineralogy and cooling history of magnesian lunar granulite 67415

Apollo granulite 67415 was investigated by mineralogical techniques to gain better understanding of cooling histories of lunar granulities. Cooling rates were estimated from chemical zoning of olivines in magnesian granulitic clasts by computer simulation of diffusion processes. The cooling rate of 10 deg C/yr obtained is compatible with a model of the granulite formation, in which the impact deposit was cooled from high temperature or annealed, at the depth of about 25 m beneath the surface.

Takeda, Hiroshi↗
NASA NTRS1992

Optical luminescence spectroscopy as a probe of the surface mineralogy of Mars

Optical luminescence (OpL) spectroscopy is an attractive use of a visible-near-IR spectrometer on a Mars lander because mineral products of atmosphere-surface interactions on Mars will probably have characteristic OpL spectra. Optical luminescence spectra would be taken at night, when a spectrometer might otherwise sit idle. Also needed would be a source of exciting radiation, which could be shared with other experiments. Optical luminescence is emission of nonthermal optical photons (near-UV through near-IR) as a response to energy input. On absorption of energy, an atom (or ion) will enter an excited state. The favored decay of many such excited states involving valence-band electrons is emission of an optical photon. Optical luminescence spectra can be useful in determining mineralogy and mineral composition. Optical luminescence in crystals can arise from essential elements (or ions), trace-element substituents (activators), or defects. Common activators in salts of alkali and alkaline earth elements include Mn(2+)(VI), other transition metals, the rare earths, and the actinides. Trace substituents of other species can enhance or quench OpL (e.g., Pb(2+) vs. Fe(3+)). Optical luminescence can also arise from defects in crystal structures, including those caused by radiation and shock.

Treiman, A. H.↗
NASA NTRS1993

The mineralogic evolution of the Martian surface through time: Implications from chemical reaction path modeling studies

Chemical reaction path calculations were used to model the minerals that might have formed at or near the Martian surface as a result of volcano or meteorite impact driven hydrothermal systems; weathering at the Martian surface during an early warm, wet climate; and near-zero or sub-zero C brine-regolith reactions in the current cold climate. Although the chemical reaction path calculations carried out do not define the exact mineralogical evolution of the Martian surface over time, they do place valuable geochemical constraints on the types of minerals that formed from an aqueous phase under various surficial and geochemically complex conditions.

Plumlee, G. S.↗
NASA NTRS1994

Absolute calibration and atmospheric versus mineralogic origin of absorption features in 2.0 to 2.5 micron Mars spectra obtained during 1993

We obtained new high resolution reflectance spectra of Mars during the 1993 opposition from Mauna Kea Observatory using the UKIRT CGS4 spectrometer. Fifty spectra of 1600-2000 km surface regions and a number of standard star spectra were obtained in the 2.04 to 2.44 micron wavelength region on 4 February 1993 UT. Near-simultaneous observations of bright standard stars were used to perform terrestrial atmospheric corrections and an absolute flux calibration. Using the known magnitude of the stars and assuming blackbody continuum behavior, the flux from Mars could be derived. A radiative transfer model and the HITRAN spectral line data base were used to compute atmospheric transmission spectra for Mars and the Earth in order to simulate the contributions of these atmospheres to our observed data. Also, we examined the ATMOS solar spectrum in the near-IR to try to identify absorption features in the spectrum of the Sun that could be misinterpreted as Mars features. Eleven absorption features were detected in our Mars spectra. Our data provide no conclusive identification of the mineralogy responsible for the absorption features we detected. However, examination of terrestrial spectral libraries and previous high spectral resolution mineral studies indicates that the most likely origin of these features is either CO3(sup 2-), HCO3(-), or HSO4(-) anions in framework silicates or possibly (Fe, Mg)-OH bonds in sheet silicates.

Bell, James F., III↗
NASA NTRS1994

Innovative instrumentation for mineralogical and elemental analyses of solid extraterrestrial surfaces: The Backscatter Moessbauer Spectrometer/X Ray Fluorescence analyzer (BaMS/XRF)

We have developed a four-detector research-grade backscatter Moessbauer spectrometer (BaMS) instrument with low resolution x-ray fluorescence analysis (XRF) capability. A flight-qualified instrument based on this design would be suitable for use on missions to the surfaces of solid solar-system objects (Moon, Mars, asteroids, etc.). Target specifications for the flight instrument are as follows: mass less than 500 g; volumes less than 300 cu cm; and power less than 2 W. The BaMS/XRF instrument would provide data on the oxidation state of iron and its distribution among iron-bearing mineralogies and elemental composition information. This data is a primary concern for the characterization of extraterrestrial surface materials.

Shelfer, T. D.↗
NASA NTRS1994

The anatomy of a cluster IDP. Part 1: Carbon abundance, bulk chemistry, and mineralogy of fragments from L2008#5

The objective of this study was to determine whether or not cluster particles are sufficiently homogeneous to enable observations from one fragment of the cluster to be extrapolated to the entire cluster. We report on the results of a consortium study of the fragments of a large cluster particle. Multiple fragments from one large cluster were distributed to several research groups and were subjected to a variety of mineralogical and chemical analyses including: SEM, TEM, ion probe, SXRF, noble gas measurements, and microprobe laser mass spectrometry of individual fragments.

Thomas, K. L.↗
NASA NTRS1994

Mineralogy of artificially heated carbonaceous chondrites

We have examined suites of heated Murchison (CM2) and Allende (CV3) samples heated in the range 400-1200 C, in a H2 atmosphere with a pressure of 10(exp 5) bar for periods of 1 to 4 weeks. We used a combination of X-ray diffraction, electron microprobe and TEM analyses to determine the mineralogy of these samples.

Zolensky, M. E.↗
NASA NTRS1994

Changes in IDP mineralogy and composition by terrestrial factors

Major objectives in the study of interplanetary dust particles (IDP's) are to constrain the physical and chemical conditions in the early solar system, to characterize the particles making up the zodiacal cloud, and to infer the physical, chemical, mineralogical, and isotopic properties of IDP parent bodies: the comets and the asteroids. However, the effects of terrestrial interactions alter the properties of some IDP's from those of the zodiacal cloud particles. The interactions can be separated into four distinct phases: near-earth gravitational segregation, atmospheric entry deceleration, stratospheric residence, and the collection/curation process.

Flynn, George J.↗
NASA NTRS1994

Mineralogy of new Antarctic achondrites with affinity to Lodran and a model of their evolution in an asteroid

We studied five new Antartic achondrites, MacAlpine Hills (MAC) 88177, Yamato (Y)74357, Y75274, Y791491 and Elephant Moraine (EET)84302 by mineralogical techniques to gain a better understanding of the mineral assemblages of a group of meteorites with an affinity to Lodran (stony-iron meteorite) and their formation processes. This group is being called lodranites. These meteorites contain major coarse-grained orthopyroxene (Opx) and olivine as in Lodran and variable amounts of FeNi metal and troilite etc. MAC88177 has more augite and less FeNi than Lodran; Y74357 has more olivine and contains minor augite; Y791491 contains in addition plagioclase. EET84302 has an Acapulco-like chondritic mineral assembladge and is enriched in FeNi metal and plagioclase, but one part is enriched in Opx and chromite. The EET84302 and MAC88177 Opx crystals have dusty cores as in Acapulco. EET84302 and Y75274 are more Mg-rich than other members of the lodranite group, and Y74357 is intermediate. Since these meteorites all have coarse-grained textures, similar major mineral assemblages, variable amounts of augite, plagioclase, FeNi metal, chromite and olivine, we suggest that they are related and are linked to a parent body with modified chondritic compositions. The variability of the abundances of these minerals are in line with a proposed model of the surface mineral assemblages of the S asteroids. The mineral assemblages can best be explained by differing degrees of loss or movements of lower temperature partial melts and recrystallization, and reduction. A portion of EET84302 rich in metal and plagioclase may represent a type of component removed from the lodranite group meteorites. Y791058 and Caddo County, which were studied for comparison, are plagioclase-rich silicate inclusions in IAB iron meteorites and may have been derived by similar process but in a different body.

Takeda, Hiroshi↗
NASA NTRS1994

Interplanetary dust particles collected from the stratosphere: Physical, chemical, and mineralogical properties and implications for their sources

The suggestion that significant quantities of interplanetary dust are produced by both main-belt asteroids and comets is based on the Infrared Astronomical Satellite (IRAS) detection of dust trails or bands associated with these objects. Gravitational focusing strongly biases all near-Earth collections of interplanetary dust in favor of particles with the lowest geocentric velocities, that is the dust from main-belt asteroids spiraling into the Sun under the influence of Poynting-Robertson radiation drag. The major dust bands in the main-belt appear to be associated with the catastrophic disruptions which produced the Eos, Themis and Koronis families of asteroids. If dust particles are produced in the catastrophic collision process, then Poynting-Robertson radiation drag is such an efficient transport mechanism from the main-belt to 1 AU that near-Earth collections of interplanetary dust should include, and perhaps be dominated by, this material. Interplanetary dust particles from 5 to 100 micrometers in diameter have been recovered from the stratosphere of the Earth by NASA sampling aircraft since the mid-1970s. The densities of a large fraction of these interplanetary dust particles are significantly lower than the densities of their constituent silicate mineral phases, indicating significant porosites. The majority of the particles are chemically and mineralogically similar to, but not identical to, the carbonaceous chondrite meteorites. Most stony interplanetary dust particles have carbon contents exceeding those of Allende, a carbonaceous chondrite meteorite having a low albedo. Higher albedo particles corresponding to S-type asteroids are underrepresented or absent from the stratospheric collections, and primitive carbonaceous particles seem to be overrepresented in the stratospheric collections compared to the fraction of main-belt asteroids classified as primitive. This suggests that much of the interplanetary dust may be generated by a stochastic process, probably preferentially sampling a few most recent collisional events.

Flynn, George J.↗
NASA NTRS1997

Mineralogy of the Martian Surface: Crustal Composition to Surface Processes

The main results have been published in the refereed literature, and thus this report serves mainly to summarize the main findings and indicate where the detailed papers may be found. Reflectance spectroscopy has been an important tool for determining the mineralogic makeup of the near surface materials on Mars. Analysis of the spectral properties of the surface have demonstrated that these attributes are heterogeneous from the coarse spatial but high spectral resolution spectra obtained with telescopes to the high spatial but coarse spectral resolution Viking data (e.g. Arvidson et al., 1989; McEwen et al., 1989). Low albedo materials show strong evidence for the presence of igneous rock forming minerals while bright materials are generally interpreted as representing heavily altered crustal material. How these materials are physically and genetically related has important implications for understanding martian surface properties and processes, weathering histories and paths, and crustal composition. The goal of this research is to characterize the physical and chemical properties of low albedo materials on Mars and the relationship to intermediate and high albedo materials. Fundamental science questions to be pursued include: (1) the observed distributions of soil, rock, and dust a function of physical processes or weathering and (2) different stages of chemical and physical alteration fresh rock identified. These objectives will be addressed through detailed analyses and modelling of the ISM data from the Phobos-2 mission with corroborating evidence of surface composition and properties provided by data from the Viking mission.

Mustard, John F.↗
NASA NTRS1998

Mineralogic and Petrologic Studies of Meteorites and Lunar Samples

In the period named, P.I. Wood and his Research Associate M.I. Petaev published or submitted for publication the following papers and abstracts, which address the subjects: Simulation of melting-crystallization relationships in chondritic and achondritic igneous systems. METEOMOD: A numerical model for the calculation of melting-crystalyization relationships in meteoritic igneous systems. Secondary Ca-Fe-rich minerals in the Bali-like and Allende-like oxidized CV3 chondrites and Allende dark inclusions. Silica minerals in the Gibeon IVA iron meteorite. Drusy vugs in the Albion iron meteorite: Mineralogy and textures. Search for exsolved ferromagnesian olivines: A meteoritic survey. Cr-bearing minerals in the Gibeon IVA iron: Indicators of sulfur and oxygen fugacities in the parent body. Lunar Planet. Computer modelling of ordinary chondrite melting. Drusy vugs in the Albion iron meteorite: Early speculation on the origin. Also Processing of chondritic and planetary material in spiral density waves in the nebula. Chondrite formation by turbulence and shock in the solar nebula.

Wood, John A.↗