Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MHD Instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Expansion-driven Weibel instability in magnetohydrodynamics: Linear theory for static systems

The Weibel dispersion relation is obtained in the magnetohydrodynamic (MHD) approximation by including a tensor expression for temperature. MHD gives an upper cutoff wavenumber for Weibel growth identical to kinetic theory if the electron drift velocity is included in the evolution of the electron temperature. MHD overestimates growth rates compared to kinetic theory and gives maximum growth at larger wavenumbers, but it only leads to divergent results as temperature anisotropy tends to infinity. Thermal conduction in MHD lowers the growth rates and shifts maximum growth to smaller wavenumbers, but flux-limited or nonlocal thermal conduction is found to significantly limit these effects. The results are used as a first step in evaluating the potential of MHD to simulate expansion-driven Weibel instability, which occurs due to the temperature tensor only cooling in the direction of expansion. Finally, the small temperature anisotropy found in expansion-driven Weibel instability means that MHD could be an adequate model because growth rates are much less than the electron plasma frequency, and wavelengths are much greater than the Debye length.

Davies, J. R. [Univ. of Rochester, NY (United Stat↗

Local shear instabilities in weakly ionized, weakly magnetized disks

We extend the analysis of axisymmetric magnetic shear instabilities from ideal magnetohydrodynamic (MHD) flows to weakly ionized plasmas with coupling between ions and neutrals caused by collisions, ionization, and recombination. As part of the analysis, we derive the single-fluid MHD dispersion relation without invoking the Boussinesq approximation. This work expands the range of applications of these instabilities from fully ionized accretion disks to molecular disks in galaxies and, with somewhat more uncertainty, to protostellar disks. Instability generally requires the angular velocity to decrease outward, the magnetic field strengths to be subthermal, and the ions and neutrals to be sufficiently well coupled. If ionization and recombination processes can be neglected on an orbital timescale, adequate coupling is achieved when the collision frequency of a given neutral with the ions exceeds the local epicyclic freqency. When ionization equilibrium is maintained on an orbital timescale, a new feature is present in the disk dynamics: in contrast to a single-fluid system, subthermal azimuthal fields can affect the axisymmetric stability of weakly ionized two-fluid systems. We discuss the underlying causes for this behavior. Azimuthal fields tend to be stabilizing under these circumstances, and good coupling between the neutrals and ions requires the collision frequency to exceed the epicyclic frequency by a potentially large secant factor related to the magnetic field geometry. When the instability is present, subthermal azimuthal fields may also reduce the growth rate unless the collision frequency is high, but this is important only if the field strengths are very subthermal and/or the azimuthal field is the dominant field component. We briefly discuss our results in the context of the Galactic center circumnuclear disk, and suggest that the shear instability might be present there, and be responsible for the observed turbulent motions.

Blaes, Omer M.↗

Evolution of sausage and helical modes in magnetized thin-foil cylindrical liners driven by a Z-pinch

Here, we present experimental results on axially magnetized (B z = 0.5 – 2.0 T), thin-foil (400 nm-thick) cylindrical liner-plasmas driven with ~600 kA by the Michigan Accelerator for Inductive Z-Pinch Experiments, which is a linear transformer driver at the University of Michigan. We show that: (1) the applied axial magnetic field, irrespective of its direction (e.g., parallel or anti-parallel to the flow of current), reduces the instability amplitude for pure magnetohydrodynamic (MHD) modes [defined as modes devoid of the acceleration-driven magneto-Rayleigh-Taylor (MRT) instability]; (2) axially magnetized, imploding liners (where MHD modes couple to MRT) generate m = 1 or m = 2 helical modes that persist from the implosion to the subsequent explosion stage; (3) the merging of instability structures is a mechanism that enables the appearance of an exponential instability growth rate for a longer than expected time-period; and (4) an inverse cascade in both the axial and azimuthal wavenumbers, k and m, may be responsible for the final m = 2 helical structure observed in our experiments. Laslty, these experiments are particularly relevant to the magnetized liner inertial fusion program pursued at Sandia National Laboratories, where helical instabilities have been observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modelling and experiment to stabilize disruptive tearing modes in the ITER baseline scenario in DIII-D

Abstract The achievement of high gain, stationary conditions in a tokamak scenario aimed at producing fusion energy in the ITER Project is crucial to the demonstration that this form of energy can be used in future reactors to provide cheap and clean energy globally. Disruptions are a challenge for the fusion energy field, in particular for the ‘ITER Baseline Scenario’ (IBS), as reproduced in the DIII-D tokamak. This work shows that a solution has been found for the m = 2/ n = 1 tearing modes that have consistently caused disruptions in the IBS: stable operation down to zero input torque was achieved by modifying the current density profile at the beginning of the pressure flattop and the ELM character later in the discharges, guided by previous results showing that the most likely cause of these instabilities is the current density profile. The coupling between sawteeth, n>2 modes and the 2/1 TMs is shown to not be statistically significant, nor the leading origin for the evolution towards instability. Ideal and resistive MHD modeling provide positive verification that a steeper ‘well’ in the region of the q = 2 rational surface leads to worse ideal stability, higher tearing index Δ’ and lower threshold Δ’ c for resistive instabilities, consistent with the experimental results. This provides confidence that the methods used in this work can be extrapolated to other devices and applied to avoid disruptions in ITER and pulsed fusion devices worldwide.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Center for Extended Magnetohydrodynamics Modeling - Final Technical Report

This project funding supported approximately 74 percent of a Ph.D. graduate student, not including costs of travel and supplies. We had a highly successful research project including the development of a second-order implicit electromagnetic kinetic ion hybrid model [Cheng 2013, Sturdevant 2016], direct comparisons with the extended MHD NIMROD code and kinetic simulation [Schnack 2013], modeling of slab tearing modes using the fully kinetic ion hybrid model and finally, modeling global tearing modes in cylindrical geometry using gyrokinetic simulation [Chen 2015, Chen 2016]. We developed an electromagnetic second-order implicit kinetic ion fluid electron hybrid model [Cheng 2013]. As a first step, we assumed isothermal electrons, but have included drift-kinetic electrons in similar models [Chen 2011]. We used this simulation to study the nonlinear evolution of the tearing mode in slab geometry, including nonlinear evolution and saturation [Cheng 2013]. Later, we compared this model directly to extended MHD calculations using the NIMROD code [Schnack 2013]. In this study, we investigated the ion-temperature-gradient instability with an extended MHD code for the first time and got reasonable agreement with the kinetic calculation in terms of linear frequency, growth rate and mode structure. We then extended this model to include orbit averaging and sub-cycling of the ions and compared directly to gyrokinetic theory [Sturdevant 2016]. This work was highlighted in an Invited Talk at the International Conference on the Numerical Simulation of Plasmas in 2015. The orbit averaging sub-cycling multi-scale algorithm is amenable to hybrid architectures with GPUS or math co-processors. Additionally, our participation in the Center for Extend Magnetohydrodynamics motivated our research on developing the capability for gyrokinetic simulation to model a global tearing mode. We did this in cylindrical geometry where the results could be benchmarked with existing eigenmode calculations. First, we developed a gyrokinetic code capable of simulating long wavelengths using a fluid electron model [Chen 2015]. We benchmarked this code with an eigenmode calculation. Besides having to rewrite the field solver due to the breakdown in the gyrokinetic ordering for long wavelengths, very high radial resolution was required. We developed a technique where we used the solution from the eigenmode solver to specify radial boundary conditions allowing for a very high radial resolution of the inner solution. Using this technique enabled us to use our direct algorithm with gyrokinetic ions and drift kinetic electrons [Chen 2016]. This work was highlighted in an Invited Talk at the American Physical Society - Division of Plasma Physics in 2015.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of the non-uniform initial environment and the guide field on the plasmoid instability

Effects of non-uniform initial mass density and temperature on the plasmoid instability are studied via 2.5-dimensional resistive magnetohydrodynamic (MHD) simulations. Our results indicate that the development of the plasmoid instability is apparently prevented when the initial plasma density at the center of the current sheet is higher than that in the upstream region. As a result, the higher the plasma density at the center and the lower the plasma β in the upstream region, the higher the critical Lundquist number needed for triggering secondary instabilities. When β=0.2, the critical Lundquist number is higher than 10{sup 4}. For the same Lundquist number, the magnetic reconnection rate is lower for the lower plasma β case. Oppositely, when the initial mass density is uniform and the Lundquist number is low, the magnetic reconnection rate turns out to be higher for the lower plasma β case. For the high Lundquist number case (>10{sup 4}) with uniform initial mass density, the magnetic reconnection is not affected by the initial plasma β and the temperature distribution. Our results indicate that the guide field has a limited impact on the plasmoid instability in resistive MHD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle Energization via Tearing Instability with Global Self-Organization Constraints

The presentation reviews how tearing magnetic reconnection leads to powerful ion energization in reversed field pinch (RFP) plasmas. A mature MHD model for tearing instability has been developed that captures key nonlinear dynamics from the global to intermediate spatial scales. A turbulent cascade is also present that extends to at least the ion gyroradius scale, within which important particle energization mechanisms are anticipated. In summary, Ion heating and acceleration associated with magnetic reconnection from tearing instability is a powerful process in the RFP laboratory plasma (gyro-resonant and stochastic processes are likely candidates to support the observed rapid heating and other features, reconnection-driven electron heating appears weaker or even absent, energetic tail formation for ions and electrons). Global self-organization strongly impacts particle energization (tearing interactions that span to core to edge, global magnetic flux change produces a larger electric field and runaway, correlations in electric and magnetic field fluctuations needed for dynamo feedback, impact of transport processes (which can be quite different for ions and electrons), inhomogeneity on the system scale, e.g., strong edge gradients).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetohydrodynamic instabilities in coronal arcades

The MHD stability of coronal arcades is studied with and without a detached flux using a two-dimensional linear MHD stability numerical model. Two-dimensional magnetohydrostatic equilibria with and without gravity are computed. A coronal arcade without a detached flux tube is found to be stable for any magnetic shear and for any longitudinal mode. On the other hand, an arcade with a detached flux tube is unstable for perturbations with nonzero longitudinal wave number n and the instability mode structure and growth rate vary depending on the field twist and n. All the equilibria studied are stable to n = 0 perturbations. Gravity has a stabilizing effect on the equilibria. As the ratio lambda of the standard arcade width to the gravitational scale height increases from zero to 0.2, the m = 0 transverse mode growth rate decreases, but high m modes are stabilized. The equilibria studied here are completely stabilized for lambda larger than 0.33.

An, Chang-Hyuk↗

Magnetohydrodynamic effects in a shock-accelerated gas cylinder

This work presents two-dimensional (2D) simulations on a cylindrical Richtmyer-Meshkov instability (RMI) in magnetohydrodynamics (MHD). Three studies are presented in an effort to quantify and qualify the evolution of the MHD RMI by varying the magnetic field orientation, strength of the magnetic field, and strength of the shock wave driving the instability. The orientations considered herein are either parallel or perpendicular to the shock wave motion. The second study varies the magnetic fields between 100, 250, and 500 gauss (G), while the third study considers incident shock wave Mach numbers M = 1.2, M = 1.66, and M = 2.2. These parameter ranges were selected to be easily achievable in experiments while the interface perturbation was selected such that its evolution is independent of either the shock wave or magnetic field orientations independently. It was found that the MHD RMI evolution is dependent upon the magnetic field orientation relative to the shock transit direction as well as their individual magnitudes. This is because the mechanism of suppression, attributed to Alfven waves, is a function of the magnetic field strength and the orientation of the magnetic field, while the mechanism of RMI evolution, baroclinic vorticity deposition, is a function of the Mach number. Stronger magnetic fields were found to provide greater mixing suppression and have significant effects on RMI-like interface morphology. Lastly, increasing the shock wave strength generated competing effects between higher RMI vorticity deposition and greater vorticity removal from the interface by faster Alfven waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ring current instabilities in the magnetohydrodynamic frequency range

This report summarizes recent theoretical developments in ring current plasma instabilities in the magnetohydrodynamic (MHD) frequency range but with the effect of finite Larmor radius, and discusses its relevance to satellite-based observations. Possible instabilities are the bounce resonant instabilities caused by a humped energy distribution, the drift mirror instability caused by an anisotropic pressure and the drift wave type instability caused by a combination of drift-bounce resonance and reduced Alfven frequency due to a high beta loading of the flux tube. Here, beta is proportional to plasma/magnetic pressures. Mechanisms leading to turbulence are also discussed.

Hasegawa, A.↗

Resistive hose modes in tokamak runaway electron beams

Beams of energetic runaway electrons are generated during disruptions in tokamaks, and fluid models are used to study their effects on macroscale dynamics. Linear computations of a massless, runaway electron beam coupled to MHD plasma show that resistive hose instabilities grow faster than tearing modes at large resistivity. Eigenvalue results with reduced models of the resistive hose instability are compared with results from the full MHD and beam system, showing that the resistive hose decouples from any plasma response. An estimate of plasma temperature at which growth of the resistive hose dominates tearing for post-disruption DIII-D plasma parameters is in a physically relevant regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of Kelvin Helmholtz Instabilities of Plasma Jets

Ulysses data indicates density fluctuations which are theorized to be the result of shear between a solar jet and its ambient. The MHD Kelvin-Helmholtz ("KH") instability causes such fluctuations as observed by Ulysses. A new dispersion relationship which accounts for this KH instability is derived via the linearization of the MHD equations. This generalizes an earlier result by Hardee. This dispersion relationship has the form of eight non-linear equations with nine unknowns.

Friedman, Mark J.↗

Analysis of Kelvin Helmholtz Instabilities of Plasma Jets

Ulysses data indicates density fluctuations which axe theorized to be the result of shear between a solar jet and its ambient. The MHD Kelvin-Helmholtz ("KH") instability causes such fluctuations as observed by Ulysses. A new dispersion relationship which accounts for this KH instability is derived via the linearization of the MHD equations. This generalizes an earlier result by Hardee. This dispersion relationship has the form of eight non-linear equations with nine unknowns.

Friedman, Mark J.↗

Fluctuation dynamo in a weakly collisional plasma

The turbulent amplification of cosmic magnetic fields depends upon the material properties of the host plasma. In many hot, dilute astrophysical systems, such as the intracluster medium (ICM) of galaxy clusters, the rarity of particle–particle collisions allows departures from local thermodynamic equilibrium. These departures – pressure anisotropies – exert anisotropic viscous stresses on the plasma motions that inhibit their ability to stretch magnetic-field lines. We present an extensive numerical study of the fluctuation dynamo in a weakly collisional plasma using magnetohydrodynamic (MHD) equations endowed with a field-parallel viscous (Braginskii) stress. When the stress is limited to values consistent with a pressure anisotropy regulated by firehose and mirror instabilities, the Braginskii-MHD dynamo largely resembles its MHD counterpart, particularly when the magnetic field is dynamically weak. If instead the parallel viscous stress is left unabated – a situation relevant to recent kinetic simulations of the fluctuation dynamo and, we argue, to the early stages of the dynamo in a magnetized ICM – the dynamo changes its character, amplifying the magnetic field while exhibiting many characteristics reminiscent of the saturated state of the large-Prandtl-number ( ${Pm}\gtrsim {1}$ ) MHD dynamo. We construct an analytic model for the Braginskii-MHD dynamo in this regime, which successfully matches simulated dynamo growth rates and magnetic-energy spectra. A prediction of this model, confirmed by our numerical simulations, is that a Braginskii-MHD plasma without pressure-anisotropy limiters will not support a dynamo if the ratio of perpendicular and parallel viscosities is too small. This ratio reflects the relative allowed rates of field-line stretching and mixing, the latter of which promotes resistive dissipation of the magnetic field. Finally, in all cases that do exhibit a viable dynamo, the generated magnetic field is organized into folds that persist into the saturated state and bias the chaotic flow to acquire a scale-dependent spectral anisotropy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

LOCAL STUDY OF ACCRETION DISKS WITH A STRONG VERTICAL MAGNETIC FIELD: MAGNETOROTATIONAL INSTABILITY AND DISK OUTFLOW

We perform three-dimensional, vertically-stratified, local shearing-box ideal MHD simulations of the magnetorotational instability (MRI) that include a net vertical magnetic flux, which is characterized by midplane plasma {beta}{sub 0} (ratio of gas to magnetic pressure). We have considered {beta}{sub 0} = 10{sup 2}, 10{sup 3}, and 10{sup 4}, and in the first two cases the most unstable linear MRI modes are well resolved in the simulations. We find that the behavior of the MRI turbulence strongly depends on {beta}{sub 0}: the radial transport of angular momentum increases with net vertical flux, achieving {alpha} {approx} 0.08 for {beta} = 10{sup 4} and {alpha} {approx}> 1.0 for {beta}{sub 0} = 100, where {alpha} is the height-integrated and mass-weighted Shakura-Sunyaev parameter. A critical value lies at {beta}{sub 0} {approx} 10{sup 3}: for {beta}{sub 0} {approx}> 10{sup 3}, the disk consists of a gas pressure dominated midplane and a magnetically dominated corona. The turbulent strength increases with net flux, and angular momentum transport is dominated by turbulent fluctuations. The magnetic dynamo that leads to cyclic flips of large-scale fields still exists, but becomes more sporadic as net flux increases. For {beta}{sub 0} {approx}< 10{sup 3}, the entire disk becomes magnetically dominated. The turbulent strength saturates, and the magnetic dynamo is fully quenched. Stronger large-scale fields are generated with increasing net flux, which dominates angular momentum transport. A strong outflow is launched from the disk by the magnetocentrifugal mechanism, and the mass flux increases linearly with net vertical flux and shows sign of saturation at {beta}{sub 0} {approx}< 10{sup 2}. However, the outflow is unlikely to be directly connected to a global wind: for {beta}{sub 0} {approx}> 10{sup 3}, the large-scale field has no permanent bending direction due to dynamo activities, while for {beta}{sub 0} {approx}< 10{sup 3}, the outflows from the top and bottom sides of the disk bend towards opposite directions, inconsistent with a physical disk wind geometry. Global simulations are needed to address the fate of the outflow.

79 ASTRONOMY AND ASTROPHYSICS↗

Parameter-Space Survey of Linear G-mode and Interchange in Extended Magnetohydrodynamics

The extended magnetohydrodynamic stability of interchange modes is studied in two configurations. In slab geometry, a local dispersion relation for the gravitational interchange mode (g-mode) with three different extensions of the MHD model [P. Zhu, et al., Phys. Rev. Lett. 101, 085005 (2008)] is analyzed. Our results delineate where drifts stablize the g-mode with gyroviscosity alone and with a two-fluid Ohm’s law alone. Including the two-fluid Ohm’s law produces an ion drift wave that interacts with the g-mode. This interaction then gives rise to a second instability at finite k y . A second instability is also observed in numerical extended MHD computations of linear interchange in cylindrical screw-pinch equilibria, the second configuration. Particularly with incomplete models, this mode limits the regions of stability for physically realistic conditions. But, applying a consistent two-temperature extended MHD model that includes the diamagnetic heat flux density ($\vec{q}$ * ) makes the onset of the second mode occur at larger Hall parameter. For conditions relevant to the SSPX experiment [E.B. Hooper, Plasma Phys. Controlled Fusion 54, 113001 (2012)], significant stabilization is observed for Suydam parameters as large as unity (D s ≲1).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MARS-Q modeling of low- n resistive kink-peeling modes and edge harmonic oscillations in DIII-D

Linear and quasilinear magnetohydrodynamic (MHD) modeling is carried out for two DIII-D discharges that both featured a transition from quiescent H-mode (QH) to wide-pedestal QH (WPQH). The MHD perturbations, associated with the edge harmonic oscillations (EHOs) observed during the QH-phase in both discharges, are identified as low-n (n is the toroidal mode number) resistive kink-peeling instabilities, with the ideal MHD counterpart remaining stable. The quasilinear model successfully simulates EHO-like perturbations during the QH phase in both discharges, confirming the experimental observations. A less intuitive finding is the EHO-like behavior involving the n = 2 perturbation, simulated for one of the discharges during the WPQH-phase. This result, while consistent with experimental observations, is obtained despite the fact that the initial perturbation is linearly stable. The eventual growth of the perturbation is solely due to nonlinear interaction between the MHD perturbation and the plasma toroidal flow. The occurrence of the EHO-like perturbation during the WPQH-phase is found to be sensitive to the initial profile of the plasma edge rotation. For DIII-D plasmas considered, the neoclassical toroidal viscosity, generated by three-dimensional low-n perturbations, is found to play a dominant role in modifying the edge flow during EHOs.

EHO↗

DEPENDENCE OF THE SATURATION LEVEL OF MAGNETOROTATIONAL INSTABILITY ON GAS PRESSURE AND MAGNETIC PRANDTL NUMBER

A large set of numerical simulations of MHD turbulence induced by the magnetorotational instability is presented. Revisiting the previous survey conducted by Sano et al., we investigate the gas pressure dependence of the saturation level. In ideal MHD simulations, the gas pressure dependence is found to be very sensitive to the choice of numerical scheme. This is because the numerical magnetic Prandtl number varies according to the scheme as well as the pressure, which considerably affects the results. The saturation level is more sensitive to the numerical magnetic Prandtl number than the pressure. In MHD simulations with explicit viscosity and resistivity, the saturation level increases with the physical magnetic Prandtl number, and it is almost independent of the gas pressure when the magnetic Prandtl number is constant. This is indicative of the incompressible turbulence saturated by the secondary tearing instability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗