Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Structural transitions, magnetic properties, and electronic structures of Co(Fe)-doped MnNiSi compounds

The structural transitions, magnetic properties, and electronic structures of Co(Fe)-doped MnNiSi compounds are investigated by x-ray powder diffraction, differential scanning calorimetry (DSC), magnetic measurements, and first-principles calculations. Results indicate that all samples undergo a martensitic transition from the Ni{sub 2}In-type parent phase to TiNiSi-type orthorhombic phase at high temperatures. The substitution of Co(Fe) for Mn in Mn{sub 1−x}Co{sub x}NiSi (x = 0.2, 0.3, and 0.4) and Mn{sub 1−y}Fe{sub y}NiSi (y = 0.26, 0.30, 0.36, 0.46, and 0.55) samples decreases the structural transition temperature and Curie temperature of martensite. The martensite phases show a typical ferromagnetic behavior with saturation field being basically unchanged with increasing Co(Fe) content, while the saturation magnetization shows a decreasing tendency. The theoretically calculated moments are in good agreement with the experimentally measured results. The orbital hybridizations between different 3d elements are analyzed from the distribution of density of states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Complex magnetic properties associated with competing local and itinerant magnetism in \({\text {Pr}}_2 {\text {Co}}_{0.86} {\text {Si}}_{2.88}\)

Ternary intermetallic compound \({\text {Pr}}_2 {\text {Co}}_{0.86} {\text {Si}}_{2.88}\) has been synthesized in single phase and characterized by x-ray diffraction, scanning electron microscopy with energy dispersive x-ray spectroscopy (SEM-EDX) analysis, magnetization, heat capacity, neutron diffraction and muon spin rotation/relaxation ( \(\mu\) SR) measurements. The polycrystalline compound was synthesized in single phase by introducing necessary vacancies in Co/Si sites. Magnetic, heat capacity, and zero-field neutron diffraction studies reveal that the system undergoes magnetic transition below \(\sim\) 4 K. Neutron diffraction measurement further reveals that the magnetic ordering is antiferromagnetic in nature with an weak ordered moment. The high temperature magnetic phase has been attributed to glassy in nature consisting of ferromagnetic clusters of itinerant (3 d ) Co moments as evident by the development of internal field in zero-field \(\mu\) SR below 50 K. The density-functional theory (DFT) calculations suggest that the low temperature magnetic transition is associated with antiferromagnetic coupling between Pr 4 f and Co 3 d spins. Pr moments show spin fluctuation along with unconventional orbital moment quenching due to crystal field. The evolution of the symmetry and the crystalline electric field environment of Pr-ions are also studied and compared theoretically between the elemental Pr and when it is coupled with other elements such as Co. The localized moment of Pr 4 f and itinerant moment of Co 3 d compete with each other below \(\sim\) 20 K resulting in an unusual temperature dependence of magnetic coercivity in the system.

36 MATERIALS SCIENCE↗

Effect of Sc{sup 3+} on structural and magnetic properties of Mn-Zn nano ferrites

In the present investigation, for the first time, we report on the effect of Sc{sup 3+} on the structural and magnetic properties of Mn{sub 0.5}Zn{sub 0.5}Sc{sub y}Fe{sub 2-y}O{sub 4} (y = 0.01, 0.03 and 0.05) nanoferrites synthesized by solution combustion method using the mixture of fuels. As synthesized powders were characterized for the detailed structural analysis by X-ray diffractometer (XRD), Fourier transmission infrared spectroscopy (FTIR) and room temperature magnetic properties by using vibrating sample magnetometer (VSM). The results of XRD and FTIR confirm that the formation of nano crystalline, single-phased Mn-Zn ferrite with cubic spinel structure belongs to Fd-3m space group. The room temperature magnetic studies shows that, the saturation magnetization (M{sub S}), remanence magnetization (M{sub R}) and magnetic moment (η{sub B}), magnetic particle size (D{sub m}) have found to increase with Sc{sup 3+} ion concentration up to x = 0.3 and then decrease. The values of αY-K and the magnetic particle size (D{sub m}) are found to be in the range of 68-75° and 10-19 nm respectively, with Sc{sup 3+} concentration.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Bi{sup 3+} Substitution on Structural, Morphological, and Magnetic Properties of Cobalt Ferrite Nanoparticles

In this research, the structural, morphological, and magnetic properties of Bi-doped cobalt ferrite (CoFe{sub 2-x}Bi{sub x}O{sub 4}) nanoparticles with x = 0.0, 0.05, 1, 0.15, and 0.2, prepared by the sol-gel method, were studied. In order to characterize the samples, several equipment and analyses including thermo-gravimetric and differential thermal analysis (TGA/DTA), X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), Fourier transform infrared spectrometer (FT-IR), and vibrating sample magnetometer (VSM) were used. The average crystallite sizes of the prepared CoFe{sub 2-x}Bi{sub x}O{sub 4} were calculated using the Scherer, UDM, SSP, and Halder-Wagner methods. The average crystallite sizes for the samples were found in the range of 26 to 44 nm, which can be attributed to the grain growth of the particles. FT-IR spectrum showed bands in the range of 430 to 590 cm{sup −1} due to the stretching vibration of an oxygen atom and metal ions (Fe-O), confirming the formation of spinel ferrite. Surface morphology of the samples was studied using FESEM. The VSM results showed that the saturation and remanence magnetizations increased by raising the doping values up to x = 0.1. The Curie temperature of the cobalt nanoferrites was determined using Faraday’s technique. The highest Curie temperature was found to be 580 °C for the undoped sample.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of deposition pressure on the structural and magnetic properties of cobalt ferrite thin films

We present the influence of deposition pressure on the structural and magnetic properties of cobalt ferrite thin films. Thin films of Co ferrite were deposited by rf sputtering on Si (100) substrate and characterized by X - Ray Diffraction (XRD), Atomic Force Microscopy (AFM) and Vibrating Sample Magnetometer (VSM). The XRD patterns showed the formation of crystalline single phase of the films. The particle size and surface roughness of the films were strongly influence by gas pressure. Hysteresis loops measured at room temperature showed the enhancement of magnetic properties with the increase of gas pressure which is attributed to the decrease of particle size.

36 MATERIALS SCIENCE↗

Effects of Sintering Temperature on Structural, Morphological and Magnetic Properties of Strontium Ferrite Nanoparticles

In the present investigation, structural, morphological and magnetic properties of SrFe{sub 2}O{sub 4} ferrite nanoparticles prepared by a sol–gel method were studied. The techniques used in this investigation were thermogravimetric analysis/differential thermal analysis (TGA/DTA), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectrometry (FT-IR), vibrating sample magnetometry (VSM) and Curie temperature analysis. The average crystallite sizes of the SrFe{sub 2}O{sub 4} were calculated using the Scherrer formula and found in the range of 11–22 nm, and this can be attributed to the grain growth of the particles. The lattice parameter of SrFe{sub 2}O{sub 4} nanoparticles decreased from 6.64 to 6.51 nm as the sintering temperature was raised from 600 to 900 °C. FT-IR analysis confirmed that bands in the range 430–590 cm{sup − 1} are due to the stretching vibration of oxygen atom and metal ions (M–O) that is Fe–O confirming the formation of spinel ferrite. Surface morphology of the samples has been studied using FESEM. The elemental composition along with their relative ratios was given by EDX and was found to be in agreement with their initial calculated values. The saturation magnetization, magnetic coercivity and remanence increase with an increasing sintering temperature from 600 to 900 °C. The present study reports the Curie temperature with an amount of 551 °C of the synthesized strontium nanoferrites using the Faraday technique.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Amorphous RE–Fe–B–Na colloidal nanoparticles: High temperature solution synthesis and magnetic properties

Graphical abstract: RE–Fe–B–Na (RE = Nd–Er) colloidal nanoparticles by high-temperature solution synthesis are ultra-small monodisperse and air-stable amorphous, whose size and magnetic dependence are studied. - Highlights: • RE–Fe–B–Na nanoparticles are obtained by high-temperature solution synthesis. • These colloidal nanoparticles are monodisperse and size controlled. • The magnetism dependence and possible magnetic coupling mechanism are studied. - Abstract: RE–Fe–B–Na (RE = Nd–Er) colloidal nanoparticles are prepared by high-temperature solution synthesis. These nanoparticles are ultra-small monodisperse, air-stable and amorphous, whose particle size and magnetic property are characterized by transmission electron microscope and superconducting quantum interference device. Taking Nd–Fe–B–Na nanoparticle as an example, it is found that the particle size can be controlled in less than 7 nm. Besides, the magnetic properties of RE–Fe–B–Na colloidal nanoparticles can be compared for different rare earth elements. Based on the bulk ferromagnetic coupling, other possible magnetic coupling mechanism is discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Designing Magnetic Properties in CrSBr through Hydrostatic Pressure and Ligand Substitution

Abstract Magnetic van der Waals (vdW) materials are a promising platform for producing atomically thin spintronic and optoelectronic devices. The A‐type antiferromagnet CrSBr has emerged as a particularly exciting material due to its high magnetic ordering temperature, semiconducting electrical properties, and enhanced chemical stability compared to other vdW magnets. Exploring mechanisms to tune its magnetic properties will facilitate the development of nanoscale devices based on vdW materials with designer magnetic properties. Here it is investigated how the magnetic properties of CrSBr change under pressure and ligand substitution. Pressure compresses the unit cell, increasing the interlayer exchange energy while lowering the Néel temperature. Ligand substitution, realized synthetically through Cl alloying, anisotropically compresses the unit cell and suppresses the Cr‐halogen covalency, reducing the magnetocrystalline anisotropy energy and decreasing the Néel temperature. A detailed structural analysis combined with first‐principles calculations reveals that alterations in the magnetic properties are intricately related to changes in direct Cr–Cr exchange interactions and the Cr–anion superexchange pathways. Further, it is demonstrated that Cl alloying enables chemical tuning of the interlayer coupling from antiferromagnetic to ferromagnetic, which is unique among known two‐dimensional magnets.

Telford, Evan J.↗

Effect of weak dipolar interaction on the magnetic properties of Ni nanoparticles assembly analyzed with different protocols

The effect of weak dipolar interactions (DIs) between Ni nanoparticles (NPs) in samples with different Ni concentrations was investigated by performing a detailed characterization of their structural and magnetic properties. From the determination of several physical parameters of Ni NP assemblies, it was found that the ac and dc magnetic susceptibility measurements are valuable for identifying the DIs between NPs while hysteresis loops measurements showed to be very insensitive, provided that the strength of the DI field is much smaller than the maximum coercive field. Therefore, the sensitivity of the observed static and dynamical magnetic properties to the effect of weak DI depends on the measurement protocols used.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic properties of high Li doped ZnO sol–gel thin films

Highlights: • Ferromagnetism in high Li doped ZnO films. • Magnetic properties observed by Guoy's and VSM method. • The rod and wrinkle like structures are observed from the surface of the films. • Band gap of ZnO does not get altered by high Li doping. - Abstract: Undoped and Li doped ZnO thin films were deposited on a glass substrate using the sol–gel dip coating method. The films were prepared at 5 mol.% and 10 mol.% of Li doped ZnO at 550 °C annealing temperature and the deposited films were characterized by X-ray diffraction (XRD), microscopic studies, Gouy's method, vibrating sample magnetometer (VSM) and UV–visible spectroscopy. All the deposited thin films had a hexagonal wurtzite structure with polycrystalline grains at random. Primarily magnetic properties of pure and Li doped ZnO films were observed by Guoy's method which depicted Dia and Para magnetic behavior at room temperature. VSM measurement reveals a coercivity of 97.7 Oe in the films. An inverse relative ferromagnetism was perceived in Li doped ZnO films which had an average transmission of <90%.

36 MATERIALS SCIENCE↗

Interplay of structural, optical and magnetic properties in Gd doped CeO{sub 2}

In this research wok systematic investigation on the synthesis, characterization, optical and magnetic properties of Ce{sub 1-x}Gd{sub x}O{sub 2} (where x=0.02, 0.04, 0.06, and 0.10) synthesized using the Solid-state method. Structural, Optical and Magnetic properties of the samples were investigated by X-ray diffraction (XRD), UV-VIS-NIR spectroscopy and VSM. Fluorite structure is confirmed from the XRD measurement on Gd doped CeO{sub 2} samples. Magnetic studies showed that the Gd doped polycrystalline samples display room temperature ferromagnetism and the ferromagnetic ordering strengthens with the Gd concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropy in Transport and Magnetic Properties of K0.64Fe1.44Se2

We report a study of the anisotropy in transport and magnetic properties of K{sub 0.64}Fe{sub 1.44}Se{sub 2.00} single crystals. The anisotropy in resistivity is up by one order of magnitude between 1.8 and 300 K. The magnetic susceptibility exhibits weak temperature dependence in the normal state with no significant anomalies with decreasing temperature. The lower critical fields H{sub c1} of K{sub 0.64}Fe{sub 1.44}Se{sub 2.00} are only about 3 Oe and the anisotropy of H{sub c1,c}/H{sub c1,ab} is about 1. The critical currents for H{parallel}ab and H{parallel}c are about 10-10{sup 3} A/cm{sup 2}, which is smaller than in iron pnictides and in FeTe{sub 1-x}Se{sub x}, and nearly isotropic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The influence of PEG-4000 and silica on crystal structure and magnetic properties of magnesium ferrite (MgFe{sub 2}O{sub 4}) nanoparticles

In this paper, reports the influence of polyethylene glycol (PEG-4000) and silica on crystal structure and magnetic properties of MgFe{sub 2}O{sub 4} nanoparticles which is synthesized by the co-precipitation method. The particle size of before coated MgFe{sub 2}O{sub 4} was around 10.5 nm, and became 5.2 nm after PEG-4000 coating and 18.8 nm after silica coating. After coating, there were appeared new phases, α-Fe{sub 2}O{sub 3} (antiferromagnetic), SiO{sub 2} and γ-FeO(OH) which are paramagnetics. The second phase sample decreased responses to the external field. Transmission Electron Microscopy (TEM) morphology analysis on nanoparticles which was coated with PEG 4000 showed that the particles become more spherical, more dispersive, and less aglomerated. The magnetic hysteresis loops which was investigated with Vibrating Sample Magnetometer (VSM) indicated that coercivity of MgFe{sub 2}O{sub 4} was 120.7 Oe, and then decreased to 40.9 Oe after coating and 34.7 Oe for coating with PEG-4000 and silica, respectively. At 15 kOe, the magnetization value decreased from 2.69 emu/g to 0.96 emu/g after coating with PEG-4000 and increased 2.82 emu/g after silica coating. The result revealed the coating with both PEG-4000 and silica influence the magnetic properties of MgFe{sub 2}O{sub 4} nanoparticles.

36 MATERIALS SCIENCE↗

Effect of deviation from stoichiometric composition on structural and magnetic properties of cobalt ferrite, CoxFe3-xO4 (x = 0.2 to 1.0)

The effects of deviation from stoichiometric composition on the structural and magnetic properties of cobalt ferrite, Co{sub x}Fe{sub 3-x}O{sub 4} (x = 0.2 to 1.0), are presented. Both CoFe{sub 2}O{sub 4} and Fe{sub 3}O{sub 4} have a spinel crystal structure, and it might be expected that intermediate compositions would have the same structure. However, results show that synthesis via the ceramic method leads to the development of a secondary {alpha}-Fe{sub 2}O{sub 3} phase. Both structural and magnetic properties are altered depending on the concentration of the {alpha}-Fe{sub 2}O{sub 3} phase. Saturation magnetization is at a maximum for the stoichiometric composition (i.e., x = 1.0) and thereafter decreases with x. In attempts to achieve the properties required for application, the ceramic method offers the ability to selectively adjust the concentrations of both CoFe{sub 2}O{sub 4} and {alpha}-Fe{sub 2}O{sub 3} phases.

36 MATERIALS SCIENCE↗

Tuning the Magnetic Properties of New Layered Iron Chalcogenides (BaF) 2 Fe 2– x Q 3 (Q = S, Se) by Changing the Defect Concentration on the Iron Sublattice

Effecting and controlling ferromagnetic-like properties hi senticonductors has proven to be a complex problem, especially when approaching room temperature. Here, we demonstrate the important role of defects in the magnetic properties of semiconductors by reporting the structures and properties of the iron chalcogenides (BaF)(2)Fe2-x Q(3) (Q= S, Se), which exhibit anomalous Magnetic properties that are correlated' with detects in the Fe-sublattice, The compounds form in both long-range ordered and disordered polytypes of a new structure typified by the alternate stacking of fluorite (BaF)(2)(2+) and (Fe(2-x)Q(3))(2-) layers. The latter layers exhibit an ordered array of strong Pe-Pe dimers in edge-Sharing tetrahedra. Given the strong Fe-Fe interaction, it is expected that the Fe-Fe dimer is,antiferromagnetically coupled, yet crystals exhibit a Weak ferromagnetic moment that orders at relatively-high temperature: below 280-315 K and 240275 K for the sulfide and selenide analogues, respectively. This transition temperature positively correlates with the concentration of defect in the Fe-sublattice, as determined by single-crystal X-ray diffraction. Our results indicate that internal defects in Fe(2-x)Q(3) layers play an important role in dictating the magnetic properties of newly discovered (BaF)2Fe(2),Q-3, (Q= 5-, Se), which can yield switchable ferromagnetically ordered mother-its at or above room temperature.

Sturza, Mihai↗

First-principles study on the magnetic properties in Mg doped BiFeO{sub 3} with and without oxygen vacancies

The magnetic properties of Mg-doped BiFeO{sub 3} (BFO) with and without oxygen vacancies are studied through first-principles calculations. The Mg-doping prefers to occupy the ferromagnetic planes and produces an obvious improved magnetization, and the magnetization is linearly enhanced with increasing Mg-doped content, which is consistent with the trend reported in experiment. However, our calculated result is significantly larger than the experimental one, and the reason is revealed that the relative energy differences of various spin-ordering configurations are small. Furthermore, oxygen vacancy in Mg-doped BFO can further enhance the magnetization, while keeping the insulating band gap character. The calculated results imply that the oxygen vacancy in Mg-doped BFO would be an effective way to improve the multiferroicity of BFO.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microscopic and magnetic properties of template assisted electrodeposited iron nanowires

Nanowires of magnetic materials such as Iron, nickel, cobalt, and alloys of them are one of the most widely investigated structures because of their possible applications in high density magnetic recording media, sensor elements, and building blocks in biological transport systems. In this work, Iron nanowires have been prepared by electrodeposition technique using Anodized Aluminium Oxide (AAO) templates. The electrolyte used consisted of FeSO{sub 4.}6H{sub 2}O buffered with H{sub 3}BO{sub 3} and acidized by dilute H{sub 2}SO{sub 4}. FESEM analysis shows that the asdeposited nanowires are parallel to one another and have high aspect ratio with a reasonably high pore-filing factor. To fabricate the working electrode, a thin film of copper (∼ 220 nm thick) was coated on back side of AAO template by e-beam evaporation system to create electrical contact with the external circuit. The TEM results show that electrodeposited nanowires have diameter around 100 nm and are polycrystalline in structure. Magnetic properties show the existence of anisotropy for in and out of plane configuration. These nanowires have potential applications in magnetic data storage, catalysis and magnetic sensor applications.

36 MATERIALS SCIENCE↗

Influence of non-magnetic Cu on enhancing the low temperature magnetic properties and Curie temperature of FeCoNiCrCu(x) high entropy alloys

The microstructure and magnetic properties of three face-centered cubic (FCC) FeCoNiCrCu(x) high entropy alloys (HEAs) (x=0, 0.5, 1) are investigated. Interestingly, addition of the nonmagnetic element Cu to FeCoNiCr HEA is found to enhance exchange interactions and low temperature saturation magnetization. The paramagnetic to ferromagnetic Curie transition temperature increases from 85 K for FeCoNiCr to 118 K for FeCoNiCrCu. This is counterintuitive since Cu is nonmagnetic; however, atom probe tomography revealed Cu rich clusters containing 5 at% Ni and 1 at% each of Fe, Co, Cr, within FCC matrix, these clusters altered the matrix composition and consequently its magnetic properties.

Chaudhary, Varun↗