Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Magnetic nanohole superlattices

A magnetic material is disclosed including a two-dimensional array of carbon atoms and a two-dimensional array of nanoholes patterned in the two-dimensional array of carbon atoms. The magnetic material has long-range magnetic ordering at a temperature below a critical temperature Tc.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Fe-Si-N films as magnetic overcoat for high density recording disk drives

A 50-nm-thick Fe-Si-N films were deposited via reactive magnetron cosputtering of independent Fe and Si targets, in Ar/N{sub 2} gas mixture, under different dc Fe target power conditions. Magnetic properties, mechanical hardness and tribological properties were characterized as a function of the Fe target power by magnetometry, nanoindentation, and nanoscratch testing, respectively. Deposited samples were found to be ferromagnetic with a coercivity of approximately 20 Oe and a saturation magnetization increasing from 200 to 1100 emu/cm{sup 3} as a function of Fe sputter power, i.e., values typical of soft magnetic materials. The mechanical hardness was found to be between 50% and 70% of the hardness of a pure SiN{sub x} film. Nanotribological properties of films deposited with a Fe target power {>=}80 W degraded rapidly.

36 MATERIALS SCIENCE↗

Perovskite magnet with quantum mechanical glassiness

Magnetic materials of strongly correlated origin are at the forefront of research in the exploration of new quantum mechanical properties involving spin and charges. Quantum magnetic material with certain intrinsic functionalities, such as continuously fluctuating spins to the lowest accessible temperature - reminiscing a liquid pattern, is argued to form a new phase of matter. Envisaging a phenomenon where the continuously fluctuating spins are also randomly frozen in space, can diminish the distinction between the two opposite extremes of quantum and classical magnetism. Here, we report new evidence in this regard where the coexistence of quantum spin continuum with a spin glass order in Co-doped CaRuO3 perovskite is demonstrated. In experimental investigations of Co-doped CaRuO3 perovskite, we find that (a) a continuum spectrum in the energy-momentum space, due to the uncorrelated spin fluctuations, persists across the weak spin glass transition at T G ≃ 23 K and (b) the quantum fluctuation of magnetic moment is spatially confined to individual sites only, thereby making it an extremely local event. Thus, the fluctuating spins, at a given time, are also randomly frozen macroscopically. The experimental observations suggest the discovery of a new magnetic phase at the cross-road of classical and quantum physics in strongly correlated perovskite materials.

36 MATERIALS SCIENCE↗

Challenges in Postprocessing of Hybrid Manufacturing of Magnet Polymer Composites to Enhance the Energy Product of NdFeB Bonded Magnets

Bonded permanent magnets need to process magnetic filler particles and binder together which is a form of hybrid or composite manufacturing that needs to simultaneously process multimaterials. Polymer bonding of the permanent magnets decreases the energy product of the bonded magnets which varies with square of loading fraction of magnetic materials. However, due to high viscosity of bonding polymer prohibits loading higher than 80 volume % of magnetic materials in most efficient loading process such as compression molding. To further increase the loading of magnetic fraction in the bonded permanent magnets, it is expected to be beneficial to introduce a fraction of nonreacting thermally sacrificial polymer along with permanent bonding polymer in the least permissible of about 20 volume % of the polymer. This process of first adding the sacrificial polymer for higher processability for composites and later removing it via post processing such as heat treatment provides a simple example of inclusion of both the additive and the subtractive stages of hybrid manufacturing. These hybrid composite magnets can be heat treated to remove the sacrificial polymer to further increase the density and energy product which might require to implement hot isostatic pressing for compaction. Although the identification of such ideal polymer requires an extensive polymer chemistry research, we have compression molded several permanent bonding polymers such as nylon, polycarbonate (PC) and polyphenyl sulfide (PPS) and potential sacrificial polymer such as polyoxymethylene (POM), polystyrene (PS), and Acrylonitrile Butadiene Styrene (ABS) and heat treated to remove the sacrificial polymers. It is discovered that oxygen free low temperature pyrolizable polymers could be the potential candidates for increasing the magnet particles loading for achieving high energy products.

36 MATERIALS SCIENCE↗

High-performance magnetic carbon materials in dye removal from aqueous solutions

To obtain a novel adsorbent with excellent adsorption capacity and convenient magnetic separation property, magnetic activated semi-coke was prepared by KOH activation method and further modified by FeCl{sub 3}. The surface morphology, physical structure, chemical properties and textural characteristics of unmodified semi-coke, KOH-modified semi-coke and magnetic activated semi-coke were characterized by scanning electron microscopy, X-ray powder diffraction, N{sub 2} adsorption-desorption measurement, and electronic differential system. The adsorption characteristics of the magnetic activated semi-coke were explored for the removal of methyl orang (MO), methylene blue (MB), congo red (CR), acid fuchsin (AF), and rhodamine B (RB) from aqueous solution. The effects of adsorption parameters, including adsorbent dosage, pH and contact time, were investigated by comparing the adsorption properties of the magnetic activated semi-coke to RB. The result showed that the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. The adsorption experiment data indicated that the pseudosecond order model and the Langmuir model could well explain the adsorption processes of RB on the magnetic activated semi-coke, and the maximum adsorption capacity (q{sub m}) was 526.32 mg/g. The values of thermodynamic parameters (ΔG°, ΔH° and ΔS°) indicated that the adsorption process depended on the temperature of the aqueous phase, and it was spontaneous and exothermic in nature. As the addition of the magnetic activated semi-coke, the color of the solution significantly faded. Subsequently, fast aggregation of the magnetic activated semi-coke from their homogeneous dispersion in the presence of an external magnetic field could be happened. So, the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. - Graphical abstract: As the addition of the magnetic activated semi-coke, the color of the solution significantly faded. Subsequently, fast aggregation of the magnetic activated semi-coke from their homogeneous dispersion in the presence of an external magnetic field could be happened. So, the magnetic activated semi-coke displayed excellent dispersion, convenient separation and high adsorption capacity. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissolution and separation of rare earth metals

A chemical dissolution method is provided for use in recycling rare earth metal-containing material such as permanent magnet material including end-of-life magnet shapes, magnet scrap and Terfenol-D alloy material by mixing the rare earth metal-containing material and an aqueous solution of a copper (II) salt to dissolve the material in the solution. The dissolved rare earth metal is then precipitated from the aqueous solution as a rare earth metal compound, such as a rare earth metal oxalate, sulfate or phosphate from which rare earth metal oxide can be obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Near net shape bulk laminated silicon iron electric steel for improved electrical resistance and low high frequency loss

The invention involves producing discontinuous, flake-shaped particles of a soft magnetic material, coating the flake-shaped particles with an electrically insulating coating, and consolidating the coated flaked-shaped particles to form a soft magnetic bulk shape. The consolidated bulk shape can comprise a layer or a simple or complex 3D magnet part shape, which has a consolidated layered microstructure that includes laminated soft magnetic regions that are substantially encapsulated by an electrical insulating layer to increase the resistivity of soft magnetic material, especially when used in silicon iron magnet parts.

Cui, Jun↗

Prediction and Control of Atomic Ordering in Electrodeposited Binary Alloy Films: Direct Synthesis of L10 Magnetic Phases

Permanent magnet materials are essential components in renewable energy technology, underlying, electric vehicles, hybrids, wind turbines and more. Today commercial permanent magnets based on Nd-Fe-B exhibit an energy product of ~ 400 kJ/m 3 , capable to run wind turbines efficiently. Unfortunately, the supplies of rare-earth elements are centralized, and their availability may see volatility over time. This state of affairs stimulates the search for the search for rare-earth-free permanent magnetic materials. The L1 0 crystal structure underlines an important class of chemical ordered alloys that exhibit uniaxial magnetocrystalline anisotropy. This material has been considered an excellent candidate for rare-earth-free permanent magnets. In this program, a series of systematic experiments were performed and analysed in order to understand the effect of each. In order to synthesize L 10-Fe-Ni, one has to circumvent the sluggish kinetic and the limited driving force resulted from the low order-disorder temperature (~320°C) of the system. A strategy was found to trigger a martensitic transformation from the FCC phase to one of the non-cubic phases by high-strain methods. The body-centered tetragonal Fe-Ni obtained by this strategy was considered as a precursor of L10 Fe-Ni. The formation of BCT Fe-Ni via a displacive process was also implemented at the nanoscale by using tailored AuNi@FeNi core@shell.

36 MATERIALS SCIENCE↗

A neural approach for the numerical modeling of two-dimensional magnetic hysteresis

This paper deals with a neural network approach to model magnetic hysteresis at macro-magnetic scale. Such approach to the problem seems promising in order to couple the numerical treatment of magnetic hysteresis to FEM numerical solvers of the Maxwell's equations in time domain, as in case of the non-linear dynamic analysis of electrical machines, and other similar devices, making possible a full computer simulation in a reasonable time. The neural system proposed consists of four inputs representing the magnetic field and the magnetic inductions components at each time step and it is trained by 2-d measurements performed on the magnetic material to be modeled. The magnetic induction B is assumed as entry point and the output of the neural system returns the predicted value of the field H at the same time step. A suitable partitioning of the neural system, described in the paper, makes the computing process rather fast. Validations with experimental tests and simulations for non-symmetric and minor loops are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strong spin-dephasing in a topological insulator-paramagnet heterostructure

The interface between magnetic materials and topological insulators can drive the formation of exotic phases of matter and enable functionality through the manipulation of the strong spin polarized transport. Here, we report that the transport processes that rely on strong spin-momentum locking in the topological insulator Bi 2 Se 3 are completely suppressed by scattering at a heterointerface with the kagome-lattice paramagnet, Co 7 Se 8 . Bi 2 Se 3 –Co 7 Se 8 –Bi 2 Se 3 trilayer heterostructures were grown using molecular beam epitaxy, where magnetotransport measurements revealed a substantial suppression of the weak antilocalization effect for Co 7 Se 8 at thicknesses as thin as a monolayer, indicating a strong dephasing mechanism. Bi 2- x Co x Se 3 films, in which Co is in a non-magnetic 3 + state, show weak antilocalization that survives to higher than x = 0.4, which, in comparison with the heterostructures, suggests that the unordered moments of Co 2+ act as a far stronger dephasing element. This work highlights several important points regarding coherent transport processes involving spin-momentum locking in topological insulator interfaces and how magnetic materials can be integrated with topological materials to realize both exotic phases and novel device functionality.

36 MATERIALS SCIENCE↗

Ultrafast Magnetism Dynamics Measure Using Tabletop Ultrafast EUV Sources

In our work to date, we made two significant advances. First we demonstrated element-selective demagnetization dynamics for the first time, with a record time resolution for x-ray probing of 55 fs. Second, in new work, we were able to probe the timescale of the exchange interaction in magnetic materials, also for the first time. Our measurements were made using the transverse magneto-optic Kerr effect (T-MOKE) geometry, since the reflectivity of a magnetic material changes with the direction of the magnetization vector of a surface. In our experiment, we periodically reversed the magnetization direction of a grating structure made of Permalloy (Ni80Fe20) using an external magnetic field. To achieve maximum contrast, we used HHG light spanning the M-shell (3p) absorption edges of Fe and Ni. Our characterization of the static magnetization of a Permalloy sample shows high magnetic asymmetry at photon energies just above and below the absorption edges at 55 eV and 65 eV, respectively. This result is in excellent agreement with measurements done on the same using a synchrotron source.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic order near 270 K in mineral and synthetic Mn{sub 2}FeSbO{sub 6} ilmenite

The structural and magnetic properties of Mn{sub 2}FeSbO{sub 6} single-crystalline mineral and ceramic samples synthesized under thermobaric treatment have been investigated, and compared to theoretical predictions based on first-principles electronic structure calculations. This ilmenite system displays a sharp magnetic transition just below the room temperature related to a ferrimagnetic ordering of the Mn{sup 2+} and Fe{sup 3+} cations, which makes Mn{sub 2}FeSbO{sub 6} a promising candidate for designing functional magnetic materials.

36 MATERIALS SCIENCE↗

CoFe{sub 2}/Al{sub 2}O{sub 3}/PMNPT multiferroic heterostructures by atomic layer deposition

Multiferroic materials and applications allow electric bias control of magnetism or magnetic bias control of polarization, enabling fast, compact, energy-efficient devices in RF/microwave communication systems such as filters, shifters, and antennas; electronics devices such as inductors and capacitors; and other magnetic material related applications including sensors and memories. In this manuscript, we utilize atomic layer deposition technology to grow magnetic CoFe metallic thin films onto PMNPT, with a ∼110 Oe electric field induced ferromagnetic resonance field shift in the CoFe/Al{sub 2}O{sub 3}/PMNPT multiferroic heterostructure. Our work demonstrates an atomic layer deposition fabricated multiferroic heterostructure with significant tunability and shows that the unique thin film growth mechanism will benefit integrated multiferroic application in near future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of Ti substitution on structural and magnetic properties of Zn–Mn ferrospinels

Highlights: ► Novel system ZnMn{sub 1−x}Ti{sub x}FeO{sub 4} synthesized by sol–gel route. ► Nanocrystalline materials. ► Magnetic materials. - Abstract: Nanocrystalline ZnMn{sub 1−x}Ti{sub x}FeO{sub 4} (1.0 ≥ x ≥ 0) ferrites were prepared by sol–gel route. Formation of single phase cubic spinel structure for all the compositions was confirmed from their X-ray diffraction patterns. The lattice parameter shows an increasing trend with the increase in Ti content. These ferrite samples existed as crystalline nanoparticles of about 30–40 nm size as observed from transmission electron microscopy (TEM) technique. EDAX analysis indicated that the concentration of different elements in different compositions is in close agreement with the starting concentrations. Infrared spectra showed two main absorption bands in the range 400–800 cm{sup −1} arising due to tetrahedral (A) and octahedral (B) stretching vibrations. The magnetic studies indicated that, the ferrimagnetic behavior increases with titanium substitution.

36 MATERIALS SCIENCE↗

Skyrmion-like Spin Textures Emerging in the Material Derived from Structural Frustration

Magnetic materials with complex spin textures present both fundamental and practical appeal. The complex patterns of magnetic moments emerging on underlying crystal lattices hold potential for robust information storage and processing, including the promise of topological quantum computing. The scope of materials that host such patterns, however, remains rather limited. Here, in this study, we report a discovery of a complex spin texture in a noncentrosymmetric material that emerges from the structural frustration at the boundary between centrosymmetric parent structures MnCoGe (the hexagonal Ni 2 In or the orthorhombic TiNiSi structure type) and MnCoAs (the TiNiSi structure type). Our findings demonstrate that such structural frustration provides a powerful handle for identifying compositional spaces where complex magnetic behavior and associated nontrivial magnetic structures are likely to emerge. Thus, the new phase MnCoGe 1/3 As 2/3 exhibits a modulated cycloidal antiferromagnetic arrangement of electron spins on a noncentrosymmetric lattice (of the hexagonal ZrNiAl type) that materializes in the space between centrosymmetric collinear ferromagnets. This work provides a pathway for discovering novel materials with exotic spin textures for next-generation spintronics and quantum technologies.

Wang, YiXu [Florida State University, Tallahassee,↗

A Model Study of Substrate Effect on the Neutron-Scattering Spectra of Ferromagnetic Ordered Graphene

Graphene as a possible new magnetic material has stimulated research interest for application in spintronic devices. Pristine graphene does not show magnetism due to equivalence of the two sub-lattices of carbon atoms. It is predicted that impurity effects, substrate-induced gap, and defects, are expected to produce in-equivalence in two carbon sub-lattices leading to magnetism. The spins on the same sub-lattices are found to exhibit ferromagnetic order and spins of different sub-lattices are found to exhibit anti-ferromagnetic order. We consider here impurity and substrate effects as the cause of generation of magnetism in graphene. We report here a microscopic tight-binding study of frequency-dependent neutron scattering spectra for ferromagnetic ordering in the graphene systems. The tight-binding Hamiltonian consists of electron hoppings upto third nearest neighbors and substrate and impurity effects in the presence of Coulomb interaction of electrons separately at two in-equivalent A and B sub-lattices of graphene. We calculate the two-particle electron Green’s functions by using Zubarev’s Green’s function technique. The frequency-dependent scattering intensity of the system is computed numerically. The spectra displays a sharp peak at the neutron momentum transfer energy at low energies and another higher-energy peak appearing at substrate-induced gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Giant magnetic anisotropy and tunnelling of the magnetization in Li2(Li1-xFex)N

Large magnetic anisotropy and coercivity are key properties of functional magnetic materials and are generally associated with rare earth elements. Here we show an extreme, uniaxial magnetic anisotropy and the emergence of magnetic hysteresis in Li2(Li 1-x Fe x )N. An extrapolated, magnetic anisotropy field of 220 T and a coercivity field of over 11 T at 2 K outperform all known hard ferromagnets and single-molecular magnets. Steps in the hysteresis loops and relaxation phenomena in striking similarity to single-molecular magnets are particularly pronounced for x<<1 and indicate the presence of nanoscale magnetic centres. Quantum tunnelling, in the form of temperature-independent relaxation and coercivity, deviation from Arrhenius behaviour and blocking of the relaxation, dominates the magnetic properties up to 10 K. The simple crystal structure, the availability of large single crystals and the ability to vary the Fe concentration make Li2(Li 1-x Fe x )N an ideal model system to study macroscopic quantum effects at elevated temperatures and also a basis for novel functional magnetic materials.

36 MATERIALS SCIENCE↗