Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Large Nc”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Coherency-Constrained Spectral Clustering for Power Network Reduction

This paper presents a methodology for reducing the complexity of large-scale power network models using spectral clustering, aggregation of electrical components, and cost function approximation. Two approaches are explored using unconstrained and constrained spectral clustering to determine areas for effective system reduction. Once the system areas are determined, both loads and generators by type are aggregated, and their new cost function is approximated through polynomial curve-fitting or statistical methods. The performance of reduced networks is evaluated in terms of their ability to follow the true daily cost of the original system over a 24-hour period considering a set of several days. Two test systems are taken as test beds. Application of the methodology to a modified version of the IEEE 39-bus system reduces it from 17 generators to a 4-bus system and 9 generators with about 93% of accuracy. Similarly, the IEEE 118-bus system is reduced from 19 generators to a 3-bus system with three aggregated units achieving over 99% of accuracy. These findings address scalability challenges and enhance accuracy for high and mid-loading level conditions, and by aggregating thermal units with similar cost functions.

42 ENGINEERING↗

Cytotoxic T cell responses to Streptococcus are associated with improved prognosis of oral squamous cell carcinoma

Several species of Streptococcus, such as S. salivarius, S. mitis, and S. anginosus, are found to extensively colonize the oral cavity and the upper respiratory tract, and have been shown to increase in patients with oral squamous cell carcinoma (OSCC). Accumulating evidence have revealed that commensal bacteria are involved in antitumor immunity via T cell-mediated mechanisms, but the role of Streptococcus enrichment in OSCC is yet unclear. In this study, we stimulated peripheral blood mononuclear cells from non-cancer controls (NCs) and OSCC patients with S. salivarius, S. mitis, and S. anginosus. We observed that compared to NC subjects, OSCC patients at earlier stages had higher frequencies of granzyme B-expressing CD8 T cells for all Streptococcus species tested, while OSCC patients at more advanced stages had higher frequencies of granzyme B-expressing CD8 T cells for S. anginosus but not other Streptococcus species. In OSCC patients, the Streptococcus-reactive CD8 T cells presented significantly lower levels of PD-1 and TIM-3 expression than Streptococcus-nonreactive CD8 T cells. The clinical outcomes of OSCC patients in our cohort were tracked for 24 months after the resection of the primary tumor. In patients that did not present tumor recurrence, the frequencies of S. salivarius-reactive and S. mitis-reactive CD8 T cells were significantly higher than that in patients that developed recurrent tumor. Furthermore, in patients with tumor recurrence, the duration between primary tumor resection and tumor recurrence was positively associated with the frequencies of S. salivarius-reactive and S. anginosus-reactive CD8 T cells. Together, we demonstrated that Streptococcus-reactive CD8 T cell responses might contribute to antitumor immunity in OSCC patients.

60 APPLIED LIFE SCIENCES↗

Fluid-kinetic modeling of a high power density radio frequency inductively coupled positive hydrogen ion source

High power density radio-frequency (RF) inductively coupled positive ion sources are attractive candidates for next-generation neutral beam injection (NBI) systems, where higher injected power and longer pulse lengths are desired without sacrificing source reliability. Operating at absorbed power densities of order $\gt 1~\mathrm{W\,cm}^{-3}$ places these sources in a regime with stronger gas heating, higher dissociation, and non-Maxwellian electron energy distributions. The Large Uniform Plasma for Ionizing Neutrals (LUPIN) is an RF inductively coupled plasma source designed to explore this high power density regime and to provide guidance for a positive ion source upgrade for the DIII-D NBI system. LUPIN is designed to operate at up to 20 kW of RF power at 2 MHz, coupling energy through a cylindrical quartz vessel to achieve target ion current densities of $2100\,\mathrm{A\,m}^{-2}$ . This paper presents fluid-kinetic modeling of LUPIN using the hybrid plasma equipment model where electrons are treated kinetically, and the simulations reveal that electron energy distribution function transitions from nearly Maxwellian in the core to bi-Maxwellian towards the edge. Parametric simulations investigate the effects of RF power, gas pressure, and frequency on plasma density, ion flux, and uniformity. Parametric sweeps reveal that increasing power shifts the primary ionization channel from molecular to atomic with diminishing flux gains due to skin-depth contraction and gas rarefaction. Higher frequency localizes heating and increases $\mathrm{H}_2^+$ and $\mathrm{H}_3^+$ delivery to the grid, while elevated pressure boosts ionization yet hinders ion transport due to increase in collisionality.

inductively coupled plasma↗

Machine learning inversion of interatomic force constants from single-crystal inelastic neutron scattering

Atomic vibrations govern many macroscopic properties of materials, but experiments to comprehensively probe them remain challenging. Inelastic neutron scattering (INS) is a powerful technique to map phonon dispersions in crystals, especially when leveraging modern time-of-flight (ToF) spectrometers with large detectors. However, efficiently and robustly extracting interatomic force constants (FCs) parameterizing phonon dynamics from experimental spectra remains a bottleneck due to the complexity and high dimensionality of ToF INS datasets. Here, we present a machine learning approach for the direct inversion of FCs from single-crystal INS measurements. The framework leverages synthetic training data generated using universal machine-learned force fields and an efficient physics-based forward model. We benchmark two neural architectures–one emphasizing structured latent representation learning and the other direct, supervised spectral regression–across simulated datasets for two materials under idealized and noisy conditions. The latent-representation model is subsequently applied to experimental single-crystal INS data on germanium. The model is shown to reproduce FCs derived from both first-principles simulations and from iterative optimization, and furthermore achieves reliable inference even from sparse, single-orientation measurements representing short data acquisitions. Analysis of the learned latent space reveals semantically continuous and physically interpretable encodings that support strong cross-domain generalization. By bridging theoretical and experimental domains, we establish a path toward rapid inversion of experimental spectra and data-driven interpretation of temperature-dependent lattice dynamics.

42 ENGINEERING↗

Non–linear bonding trends in maleonitrile-1,2–dithiolate complexes of the transuranium actinides

The trivalent actinides are produced in the nuclear fuel cycle during power production and provide the largest long-term radiation dose in used nuclear fuel. It is ideal for these elements to be removed from used nuclear fuel for disposal and a necessity for fuel recycling. A key challenge to this is the similarity of chemical behavior of the trivalent actinides to the lanthanides that are also present as fission products in used fuel. Thus far, some of the most effective separations of actinides from lanthanides utilise chelating agents containing sulfur moieties such as dithiophosphinates that selectively bind to actinide ions because of a greater bond covalency relative to lanthanide ions. Typically, greater differences between actinide and lanthanide ions are observable the more ligands and chelators bonds have a covalent character. Here, a series of complexes of the trivalent actinides Np(III) through Cf(III) (excluding Bk(III)) with maleonitrile-1,2-dithiolate (mnt 2– ) are synthesized along with their lanthanide counterparts (La(III) – Nd(III), Sm(III) – Gd(III), Dy(III)), in order to characterize the nature of chemical bonds with these metal ions and a polarizable, non-innocent, sulfur-donor ligand. The metal-sulfur bonds in these complexes trend shorter than measured for lanthanides with equivalent ionic radii. However, particularly large deviations are observed in the neptunium and plutonium complexes in both structure and bonding, resulting in a nonlinear bond length trendline for the actinide series. Density Functional Theory (DFT) calculations with Quantum Theory of Atoms in Molecules (QTAIM) and Natural Bond Order (NBO) analyses indicate that for the neptunium and plutonium complexes, the presence of increased 5f-orbital participation, energy degeneracy of the metal and ligand orbitals, and the structure packing result in shortened M–S bonds. The stabilization of the energy of the 5f-orbitals and the decrease in f-contribution to bonding orbitals in the later actinides results in structural properties more similar to the lanthanide complexes.

07 ISOTOPE AND RADIATION SOURCES↗

A statistical approach to analyzing domain dynamics in ferroelectric crystals using X-ray photon correlation spectroscopy

Ferroelectric materials exhibit strong electromechanical coupling, largely influenced by their domain structures. Numerous microstructural studies indicate that smaller domains with higher domain wall density generally enhance domain wall motion, although some inconsistencies have been reported. In this work, we use X-ray photon correlation spectroscopy (XPCS) to probe dynamic response in Pb(Mg 1/3 Nb 2/3 )O 3 -29PbTiO 3 (PMN-29PT) single crystals under applied electric fields. We introduce a two-field correlation approach, adapted from conventional two-time correlation to quantify dynamics. Statistical analysis reveals that both [001]-oriented direct current (DC) and alternating current (AC) poled samples show Poisson-like behavior within specific electric field regions. The DC-poled samples exhibit more frequent domain wall jump events but with smaller amount of decorrelation per jump event, whereas the AC-poled samples show fewer jump events with larger decorrelation per jump event. This observation aligns with the prevalence of 109° domain walls in the AC-poled samples, which contribute to more domain wall motion. These findings provide experimental evidence of collective domain wall motion and establish a direct connection between mesoscale dynamics and electromechanical response.

36 MATERIALS SCIENCE↗

pyRMG: A framework for high-throughput, large-cell DFT calculations on supercomputers

Exascale computing delivers the raw power to simulate ever larger and more chemically realistic systems, but realizing this potential requires codes that can efficiently use thousands of processors. Our real-space multigrid (RMG) density functional theory (DFT) code’s grid-decomposition approach scales nearly linearly with the number of graphics processing units (GPUs), even for simulations exceeding thousands of atoms. This scalability makes RMG a compelling tool for high-throughput DFT studies of materials that would otherwise be bottlenecked in other codes (for example, by global fast Fourier transforms in plane-wave DFT). However, the limited workflow infrastructure for RMG has thus far constrained its adoption to a small user community. In this work, we present pyRMG, a Python package designed to streamline the setup and execution of RMG DFT calculations. Built on the pymatgen and ASE (Atomic Simulation Environment) computational materials science Python packages, pyRMG automates input generation and convergence checking, and it integrates with modern job schedulers (e.g., Flux) on leadership-class platforms such as Frontier and Perlmutter. Here, we demonstrate pyRMG for a high-throughput study of strain effects in 2D 2L-Bi 2 Se 3 /2L-NbSe 2 heterostructures, which offers chemical insights into this system and shows that RMG-based workflows can converge with limited user intervention.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Projections of future climate for U.S. national assessments: past, present, future

Climate assessments consolidate our understanding of possible future climate conditions as represented by climate projections, which are largely based on the output of global climate models. Over the past 30 years, the scientific insights gained from climate projections have been refined through model structural improvements, emerging constraints on climate feedbacks, and increased computational efficiency. Within the same period, the process of assessing and evaluating information from climate projections has become more defined and targeted to inform users. As the size and audience of climate assessments has expanded, the framing, relevancy, and accessibility of projections has become increasingly important. This paper reviews the use of climate projections in national climate assessments (NCA) while highlighting challenges and opportunities that have emerged over time. Reflections and lessons learned address the continuous process to understand the broadening assessment audience and evolving user needs. Insights for future NCA development include (1) identifying benchmarks and standards for evaluating downscaled datasets, (2) expanding efforts to gather research gaps and user needs to inform how climate projections are presented in the assessment (3) providing practitioner guidance on the use, interpretation, and reporting of climate projections and uncertainty to better inform decision-making.

Assessment↗

Uncertainties in the production of iron-group nuclides in core-collapse supernovae from Monte Carlo variations of reaction rates

Core-collapse supernovae, occurring at the end of massive star evolution, produce heavy elements, including those in the iron peak. Although the explosion mechanism is not yet fully understood, theoretical models can reproduce optical observations and observed elemental abundances. However, many nuclear reaction rates involved in explosive nucleosynthesis have large uncertainties, impacting the reliability of abundance predictions. To address this, we have previously developed a Monte Carlo-based nucleosynthesis code that accounts for reaction rate uncertainties and has been applied to nucleosynthesis processes beyond iron. Our framework is also well suited for studying explosive nucleosynthesis in supernovae. In this paper, we investigate 1D explosion models using the ‘PUSH method’ , focusing on progenitors with varying metallicities and initial masses around $M_{\rm ZAMS} = 16\, {\rm M}_{\odot }$. Detailed post-process nucleosynthesis calculations and Monte Carlo analyses are used to explore the effects of reaction rate uncertainties and to identify key reaction rates in explosive nucleosynthesis. We find that many reactions have little impact on the production of iron-group nuclei, as these elements are primarily synthesized in the nuclear statistical equilibrium. However, we identify a few ‘key reactions’ that significantly influence the production of radioactive nuclei, which may affect astrophysical observables. In particular, for the production of ${}^{44}{\rm Ti}$, we confirm that several traditionally studied nuclear reactions have a strong impact. However, determining a single reaction rate is insufficient to draw a definitive conclusion.

79 ASTRONOMY AND ASTROPHYSICS↗

Lessons Learned: Summary of Insights From the HERO WEC and Waves to Water Deployments Between 2022 and 2024

In 2020, a team from the National Renewable Energy Laboratory (NREL) partnered with the East Carolina University Coastal Studies Institute to develop a small, modular, wave-powered point absorber desalination prototype. That prototype, known as the hydraulic and electric reverse osmosis wave energy converter (HERO WEC), was intended to de-risk the installation activities planned for the Waves to Water Prize sponsored by the Water Power Technologies Office. The NREL team was given approximately 18 months to design, build, bench test, and deploy the HERO WEC prototype. Since the initial HERO WEC development, it has been used for two in-lab test programs and three ocean deployments. The first in-lab test program focused on ensuring that the overall operation of the device occurred as expected and on validating the operation of safety systems such as pressure relief valves or electrical breakers for load mitigation. The second in-lab test program was the first time the NREL team leveraged NREL’s large-amplitude motion platform to characterize the performance of the HERO WEC. Of the three in-water deployments, the first deployment was effectively an installation and recovery practice with no meaningful wave activity during the time that it was installed. The second deployment was a 2-week effort that enabled both the electric and hydraulic configurations of the device to be in the water for approximately 5 days each. This deployment was also the first time that the team had the opportunity to perform a drivetrain swap on the Coastal Studies Institute research vessel. The third deployment had to be split into two separate installations due to minor damage incurred from the WEC spinning during the initial installation. This report summarizes the deployments, the challenges encountered with each deployment, and the lessons learned for future work.

16 TIDAL AND WAVE POWER↗

An investigation on machine learning predictive accuracy improvement and uncertainty reduction using VAE-based data augmentation

The confluence of ultrafast computers with large memory, rapid progress in Machine Learning (ML) algorithms, and the availability of large datasets place multiple engineering fields at the threshold of dramatic progress. However, a unique challenge in nuclear engineering is data scarcity because experimentation on nuclear systems is usually more expensive and time-consuming than most other disciplines. One potential way to resolve the data scarcity issue is deep generative learning, which uses certain ML models to learn the underlying distribution of existing data and generate synthetic samples that resemble the real data. In this way, one can significantly expand the dataset to train more accurate predictive ML models. In this study, our objective is to evaluate the effectiveness of data augmentation using variational autoencoder (VAE)-based deep generative models. We investigated whether the data augmentation leads to improved accuracy in the predictions of a deep neural network (DNN) model trained using the augmented data. Additionally, the DNN prediction uncertainties are quantified using Bayesian Neural Networks (BNN) and conformal prediction (CP) to assess the impact on predictive uncertainty reduction. To test the proposed methodology, we used TRACE simulations of steady-state void fraction data based on the NUPEC Boiling Water Reactor Full-size Fine-mesh Bundle Test (BFBT) benchmark. Here, we found that augmenting the training dataset using VAEs has improved the DNN model’s predictive accuracy, improved the prediction confidence intervals, and reduced the prediction uncertainties.

Bayesian neural network↗

Evaluating cosmological biases using photometric redshifts for Type Ia Supernova cosmology with the Dark Energy Survey Supernova Program

Cosmological analyses with Type Ia Supernovae (SNe Ia) have traditionally been reliant on spectroscopy for both classifying the type of supernova and obtaining reliable redshifts to measure the distance–redshift relation. While obtaining a host-galaxy spectroscopic redshift for most SNe is feasible for small-area transient surveys, it will be too resource intensive for upcoming large-area surveys such as the Vera Rubin Observatory Legacy Survey of Space and Time, which will observe on the order of millions of SNe. Here, we use data from the Dark Energy Survey (DES) to address this problem with photometric redshifts (photo-z) inferred directly from the SN light curve in combination with Gaussian and full p(z) priors from host-galaxy photo-z estimates. Using the DES 5-yr photometrically classified SN sample, we consider several photo-z algorithms as host-galaxy photo-z priors, including the Self-Organizing Map redshifts (SOMPZ), Bayesian Photometric Redshifts (BPZ), and Directional-Neighbourhood Fitting (DNF) redshift estimates employed in the DES 3 × 2 point analyses. With detailed catalogue-level simulations of the DES 5-yr sample, we find that the simulated w can be recovered within ±0.02 when using SN+SOMPZ or DNF prior photo-z, smaller than the average statistical uncertainty for these samples of 0.03. With data, we obtain biases in w consistent with simulations within ~1σ for three of the five photo-z variants. We further evaluate how photo-z systematics interplay with photometric classification and find classification introduces a subdominant systematic component. This work lays the foundation for next-generation fully photometric SNe Ia cosmological analyses.

(cosmology:) dark energy↗

Coulomb excitation of 80 Sr and the limits of the 𝑁 ≈ 𝑍 ≈ 40 island of deformation

The region of 𝑁 ≈ 𝑍 ≈ 40 has long been associated with strongly deformed nuclear configurations. The presence of this strong deformation was recently confirmed through lifetime measurements in 𝑁 ≈ 𝑍 Sr and Zr nuclei. Theoretically, however, these nuclei present a challenge due to the vast valence space required to incorporate all necessary orbitals. Recent state-of-the-art predictions indicate a near axial prolate deformation for 𝑁 = 𝑍 and 𝑁 = 𝑍+2 nuclei between 𝑁 = 𝑍 = 36 and 𝑁 = 𝑍 = 40. In this work we investigate the shores of this island of deformation through a sub-barrier Coulomb excitation study of the 𝑁 = 𝑍+4 nucleus, 80 Sr . Extracting a spectroscopic quadrupole moment of 𝑄 𝑠 ⁡($2^+_1$)= $0.5^{+0.8}_{−0.9}$𝑒⁢b, we find that 80 Sr is inconsistent with significant axial prolate deformation with a significance of 1.5⁢𝜎. This result, albeit with a large uncertainty, indicates that the predicted region of strong prolate deformation around 𝑁 = 𝑍 = 40 is tightly constrained to the quartet of nuclei: 76,78 Sr and 78,80 Zr .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Assessing the Impacts of Conformational Fluxionality on Copper(II/I) Electron Transfer Self-Exchange

Typical Cu(II/I) complexes exhibit hallmark structural changes during their electron transfer (ET) reactions that result from the (pseudo) Jahn-Teller distortions and changes in polarizability inherent to their d 10 / d 9 configurations. Given that such structural changes incur large reorganization energy penalties, slow the rates of ET are characteristic of these compounds. Notwithstanding, we recently reported a set of Cu(II/I) complexes that undergo significant and well-defined structural changes during their redox reactions yet exhibit rapid (> 10 5 M ‒1 s ‒1 ) ET self-exchange rate constants ( k 11 ). To explain these results we proposed a pre-equilibrium model in which inherent conformational fluxionality in one of the two oxidation states provides access to pathways involving lower reorganization energies during the ET event. Herein we report our results testing this hypothesis through the preparation and study of a homologous series of compounds exhibiting varying extents of con-formational fluxionality in the Cu(I) state. We characterize these compounds electrochemically, structurally, and by varia-ble temperature NMR spectroscopy to provide experimental evidence for increase fluxionality across the series. We then correlate the trend with increasing k 11 through NMR linewidth broadening experiments, further taking care to define the impacts of solvent impurities therein. Finally, the nature of the conformational rearrangements, and their relation to increased k 11 are explored computationally to reveal differential Boltzmann populations of conformers across the series. The cumulative results of these studies support a previously underappreciated strategy for overcoming barriers to slow ET kinetics: via the incorporation of conformational fluxionality.

Singh, Aditi↗

Ultra-low field 13 C MRI of hyperpolarized pyruvate

Medicine is evolving beyond therapy largely predicated on anatomical information and towards incorporating patient-specific molecular biomarkers of disease for more accurate diagnosis and effective treatment. The complementary combination of hyperpolarization by spin-lock induced crossing signal amplification by reversible exchange (SLIC SABRE) and low field magnetic resonance imaging (MRI) can enable accessible metabolic imaging to advance personalized medicine. Hyperpolarized 13 C-enriched pyruvate has demonstrated promise for imaging metabolism in cancer, heart disease and neurodegenerative disorders; however, broader clinical adoption awaits validated clinical indications, and is further constrained by the cost and limited availability of current hyperpolarization technology. Parahydrogen-based polarization techniques, paired with low-cost high-performance MRI at millitesla fields, offer a means of broadening the reach of metabolic imaging. Here we show results demonstrating in situ hyperpolarization of pyruvate at 6.5 mT by SLIC SABRE, followed by immediate readout without field cycling or sample shuttling. We achieve 13 C signal enhancements several million times above thermal equilibrium at 6.5 mT, corresponding to polarization levels of approximately 3%. Leveraging this enhancement, we perform 13 C MRI and acquire NMR spectra with resolution sufficient to distinguish chemical shifts between pyruvate isotopomers. These results show a viable pathway towards accessible metabolic imaging with hyperpolarized 13 C MRI at ultra-low field.

Medical and clinical diagnostics↗

Evaluation of daily gridded climate products using in situ FLUXNET data and tree growth modeling

Gridded climate data products have facilitated research in climate and ecology by providing meteorological data continuously across large spatial scales. However, the sensitivity of scientific outcomes to dataset choice remains poorly understood, and evaluation using station-based records can favor datasets built heavily on weather stations. Here, we evaluate seven high-resolution daily gridded datasets covering the contiguous United States using independent meteorology from the FLUXNET2015 dataset, with a focus on the implications of dataset choice for process-based tree growth modeling. We find that gridded products tend to capture temperature accurately while consistently overestimating the magnitude and frequency of precipitation and its extremes. Moreover, datasets vary in how they define a ‘day,’ which significantly affects temporal alignment with FLUXNET2015 observations. Despite differences among the datasets, the interannual variability in tree ring simulations is insensitive to dataset choice, likely because daily-scale biases are averaged out through accumulated growth across several months. However, inaccuracies in temperature and precipitation can significantly bias modeled xylem cell production, with systematically higher annual precipitation in the gridded datasets leading to greater xylem production compared to simulations using in situ data. Our results suggest that model applications, especially those that integrate to time scales longer than one day, are likely insensitive to climate dataset choice, but applications that are sensitive to daily climate variations or to absolute climate values need to carefully consider biases in gridded climate products.

54 ENVIRONMENTAL SCIENCES↗

Which Plant Traits Increase Soil Carbon Sequestration? Empirical Evidence From a Long‐Term Poplar Genetic Diversity Trial

Plants play a key role in mediating soil response to global change, and breeding or engineering crops to increase soil organic carbon (SOC) storage is a potential route to land-based carbon dioxide removal in agricultural systems. However, due to limited observational datasets plus shifting paradigms of SOC stabilization, it is unclear which plant traits are most important for enhancing different types of soil organic matter. Existing long-term common gardens of genetically diverse plant populations may provide an opportunity to evaluate biological controls on SOC, separate from environmental or management variability. Here we report on soil and root chemical data collected for 24 genotypes within a 13-year-old common garden in northwestern Oregon planted with a large natural variant population of Populus trichocarpa. Fractionating surface soil (0–15 cm) revealed substantial variation in stocks of mineral-associated organic matter (MAOM; 18–67 t C/ha) and particulate organic matter (POM; 2–22 t C/ha). Tree genotype explained 24% and 26% of the MAOM and POM stock variability, respectively, after controlling for background variability. We found minimal association between SOC concentration and either aboveground tree productivity or root biomass recalcitrance (C/N ratios and lignin content). In contrast, root elemental content appeared influential for MAOM-C concentration, which showed a strong positive association with root aluminum (Al) and a strong negative association with root boron (B) and magnesium (Mg). Furthermore, root concentrations of these elements were highly heritable (57%–78%) and not simply a reflection of background variation in soil elemental concentrations. We estimate that surface SOC stocks under these 24 genotypes have diverged at rates of up to 1.2–4.3 t C/ha/year. These results suggest that long-term genetic diversity trials have value for elucidating biological controls on soil organic matter dynamics, and that traits associated with root elemental content may be a useful target for enhancing biosequestration.

biomass recalcitrance↗

Li+ alumino-silicate ion source development for the Neutralized Drift Compression Experiment (NDCX-II)

To heat targets to electron-volt temperatures for the study of warm dense matter with intense ion beams, low mass ions, such as lithium, have an energy loss peak (dE/dx) at a suitable kinetic energy. The Heavy Ion Fusion Sciences (HIFS) program at Lawrence Berkeley National Laboratory will carry out warm dense matter experiments using Li{sup +} ion beam with energy 1.2-4 MeV in order to achieve uniform heating up to 0.1-1 eV. The accelerator physics design of Neutralized Drift Compression Experiment (NDCX-II) has a pulse length at the ion source of about 0.5 {micro}s. Thus for producing 50 nC of beam charge, the required beam current is about 100 mA. Focusability requires a normalized (edge) emittance {approx}2 {pi}-mm-mrad. Here, lithium aluminosilicate ion sources, of {beta}-eucryptite, are being studied within the scope of NDCX-II construction. Several small (0.64 cm diameter) lithium aluminosilicate ion sources, on 70%-80% porous tungsten substrate, were operated in a pulsed mode. The distance between the source surface and the mid-plane of the extraction electrode (1 cm diameter aperture) was 1.48 cm. The source surface temperature was at 1220 C to 1300 C. A 5-6 {micro}s long beam pulsed was recorded by a Faraday cup (+300 V on the collector plate and -300 V on the suppressor ring). Figure 1 shows measured beam current density (J) vs. V{sup 3/2}. A space-charge limited beam density of {approx}1 mA/cm{sup 2} was measured at 1275 C temperature, after allowing a conditioning time of about {approx} 12 hours. Maximum emission limited beam current density of {ge} 1.8mA/cm{sup 2} was recorded at 1300 C with 10-kV extractions. Figure 2 shows the lifetime of two typical sources with space-charge limited beam current emission at a lower extraction voltage (1.75 kV) and at temperature of 1265 {+-} 7 C. These data demonstrate a constant, space-charge limited beam current for 20-50 hours. The lifetime of a source is determined by the loss of lithium from the alumino-silicate material either as ions or as neutral atoms. Our measurements suggest that for the low duty factor ({approx}10{sup -8}) required for NDCX-II, the lifetime of an emitter depends mostly on the duration that the emitter spends at elevated temperature, that is, at {ge} 1250 C. At this temperature, lithium loss is due mostly to neutral loss (not charged ion extraction). Extension of the lifetime of the source may be possible by lowering the temperature between beam pulses, when the idling time is sufficiently long between shots. The NDCX-II design seeks to operate the ion source at the maximum current density without running into heat management and lifetime problems. In preparation to fabricate a large (10.9 cm in diameter) source for the NDCXII experiment, recently a 7.6 cm diameter source has been fabricated. The method of fabrication of this larger source is similar to that of fabrication of a 6.3mm diameter source, except a longer furnace heating time was used due to mass differences. NDCX-II construction is in progress. Progress of lithium source study for NDCX-II is available in literature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗