Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LOCATION CLOSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Analysis of Composite Panel-Stiffener Debonding Using a Shell/3D Modeling Technique

Interlaminar fracture mechanics has proven useful for characterizing the onset of delaminations in composites and has been used successfully primarily to investigate onset in fracture toughness specimens and laboratory size coupon type specimens. Future acceptance of the methodology by industry and certification authorities, however, requires the successful demonstration of the methodology on the structural level. For this purpose, a panel was selected that is reinforced with stiffeners. Shear loading causes the panel to buckle, and the resulting out-of-plane deformations initiate skin/stiffener separation at the location of an embedded defect. A small section of the stiffener foot, web and noodle as well as the panel skin in the vicinity of the delamination front were modeled with a local 3D solid model. Across the width of the stiffener foot, the mixedmode strain energy release rates were calculated using the virtual crack closure technique. A failure index was calculated by correlating the results with a mixed-mode failure criterion of the graphite/epoxy material. Computed failure indices were compared to corresponding results where the entire web was modeled with shell elements and only a small section of the stiffener foot and panel were modeled locally with solid elements. Including the stiffener web in the local 3D solid model increased the computed failure index. Further including the noodle and transition radius in the local 3D solid model changed the local distribution across the width. The magnitude of the failure index decreased with increasing transition radius and noodle area. For the transition radii modeled, the material properties used for the noodle area had a negligible effect on the results. The results of this study are intended to be used as a guide for conducting finite element and fracture mechanics analyses of delamination and debonding in complex structures such as integrally stiffened panels.

Krueger, Ronald↗

Development of three-dimensional models for WIPP performance assessment using PFLOTRAN - 15073

The Waste Isolation Pilot Plant (WIPP), located in southeastern New Mexico, has been developed by the U.S. Department of Energy (DOE) for the deep geologic disposal of transuranic (TRU) waste. WIPP performance assessment (PA) calculations estimate the probability and consequence of potential radionuclide releases from the repository to the accessible environment for a regulatory period of 10,000 years after facility closure. To date, WIPP PA calculations have employed multiple 2D numerical models requiring simplification of the mesh and processes. Introducing 3D numerical models within WIPP PA enables increasingly realistic representations of the WIPP subsurface domain and improved flexibility for incorporating relevant features. Furthermore, the increased computing capacity afforded by modern hardware architectures enables this 3D modeling. Modeling in 3D will be more flexible because less homogenization is required and better accuracy of the results can be obtained by making fewer assumptions and/or simplifications. The use of PFLOTRAN, a state-of-art massively parallel subsurface flow and reactive transport code, will enable this 3D modeling, and eliminate the need for multiple related, but decoupled 2D models. However, there are capabilities that PFLOTRAN must be demonstrated in order to fulfill requirements for WIPP PA. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Post-Closure Inspection, Sampling, and Maintenance Report for the Salmon, Mississippi, Site Calendar Year 2011

This report summarizes the 2011 annual inspection, sampling, measurement, and maintenance activities performed at the Salmon, Mississippi, Site (Salmon site1). The draft Long-Term Surveillance and Maintenance Plan for the Salmon Site, Lamar County, Mississippi (DOE 2007) specifies the submittal of an annual report of site activities with the results of sample analyses. The Salmon site consists of 1,470 acres. The site is located in Lamar County, Mississippi, approximately 10 miles west of Purvis, Mississippi, and about 21 miles southwest of Hattiesburg, Mississippi.

54 ENVIRONMENTAL SCIENCES↗

Co-optimized machine-learned manifold models for large eddy simulation of turbulent combustion

Many modeling approaches in large eddy simulation (LES) of turbulent combustion employ a projection of the thermochemical state onto a low-dimensional manifold within state space to reduce the number of transported variables and hence computational cost. Flamelet-generated manifolds (FGM) is an example of a well-established, physics-based approach, but increasingly, principal component analysis (PCA) is being used as a data-driven method for generating manifold models. For both approaches, the nonlinear relationship between the location on the predefined manifold and the outputs of interest, such as reaction rates, can be tabulated or encoded in a neural network. This work proposes a new approach for manifold modeling that extends these existing approaches. A modified neural network structure simultaneously encodes the definition of the manifold variables, the nonlinear mapping, and the subfilter closure for LES. This allows all three of these aspects of the model to be co-optimized, generating a model from any source of combustion thermochemical state data. The manifold parameterizing variables are constrained to be linear combinations of species, as in FGM and PCA-based models, to aid in interpretability and implementation. For LES, subfilter variances of the manifold variables are also included as inputs. Two types of a priori analysis are performed to evaluate the new approach. In the first, the model is trained on data from one-dimensional premixed flames. In this case, the approach recovers the behavior of flamelet-based manifold approaches, and in fact slightly improves performance by identifying an optimized progress variable. The approach is also applied to data from direct numerical simulations of spherical ignition kernels in isotropic turbulence. For any specified manifold dimensionality, the new approach provides substantially lower prediction errors than a PCA-based model developed from the same data set. Additionally, the LES formulation of the new approach can provide accurate predictions for filtered reaction rates across a variety of filter widths.

97 MATHEMATICS AND COMPUTING↗

The qualification of the shuttle booster separation motors

Four booster separation motors (BSM) located at each end of every solid rocket booster (SRB) provide the needed side force to separate the boosters from the external tank at booster burnout. Four BSMs at the top of the SRB are located in a box pattern in the nose cone frustum. The four BSMs at the aft end of the SRB are arranged side-by-side on the SRB aft skirt. Aspects of BSM design and performance are considered, taking into account a motor design/performance summary, the case design, the insulation, the grain design, the nozzle/aft closure design, the ignition system, the propellant, and the motor assembly. Details of motor testing are also discussed, giving attention to development testing, qualification testing, and flight testing.

Chase, C. A.↗

Variation of crack-opening stresses in three-dimensions - Finite thickness plate

A 3D elastic-plastic finite-element analysis is conducted to study crack-growth behavior of thin and thick center-cracked specimens under constant-amplitude loading conditions. The numerical analysis and the specimen configuration and loading are described for both the thin and thick conditions. Stabilized crack-opening stresses of interior and exterior regions are given as are the closure and opening profiles of the crack-surface plane after the tenth cycle. The effect of thickness is discussed with respect to the crack-opening stress levels and the plastic zones of the interior and exterior regions. A load-reduced-displacement technique allows the calculation of the crack-opening stresses at three locations on the crack surface plane. The constraint effect related to thickness gives a lower stabilized crack-opening stress level for the thick specimens.

Chermahini, R. G.↗

The Functor system: a new on-the-fly take on Material Properties based on C++ functions

In the context of solving multiphysics problems, the discretization of the partial differential equations (PDE) at hand often takes the spotlight. However, for most engineering users and even application developers, the discretization of the equations has already been performed. Instead, they are tasked with implementing specific closure relations and material properties. MOOSE has long enabled this using the Materials system. This system relied on the pre-computation of all properties before they are used in the PDE or in postprocessing. In this talk we will introduce the Functor system, which was deployed in MOOSE in 2021, then present a few applications of functors in flow modeling simulations by the NEAMS program. Functors first offer great flexibility in their evaluation. Rather than storing various arrays for material properties, they are evaluated on the fly at the location and state, e.g. current or old value, requested. Unlike regular material properties, several operations such as the time derivative, the divergence and the curl can be requested from a functor. Similar to material properties, functors can be made to depend on arbitrary combinations of variables, functions, postprocessors and other properties. However, unlike material properties, any of these can be substituted for a functor material property. Thanks to this, objects no longer need to be duplicated based on the types of their parameters.

97 - MATHEMATICS AND COMPUTING↗

Bentonite alteration due to thermal-hydro-chemical processes during the early thermal period in a nuclear waste repository

After closure of an underground nuclear waste repository, the decay of radionuclides will raise temperature in the repository, and the bentonite buffer will resaturate by water inflow from the surrounding host rock. The perturbations from these thermal and hydrological processes are expected to dissipate within hundreds to a few thousand years. Here, we investigate coupled thermal-hydro-chemical processes and their effects on the short-term performance of a potential nuclear waste repository located in a clay formation. Using a simplified geometric configuration and abstracted hydraulic parameters of the clayey formation, we examine geochemical processes, coupled with thermo-hydrologic phenomena, and potential changes in porosity near the waste container during the early thermal period. The developed models were used for evaluating the mineral alterations and potential changes in porosity of the buffer, which can affect the repository performance. The results indicate that mineral alteration and associated changes in porosity induced by early thermal and hydrological processes are relatively small and are expected to not significantly affect flow and transport properties. Chlorite precipitation was obtained in all simulation cases. A maximum of one percent volume fraction of chlorite could be formed, whose process may reduce swelling and sorption capacity of bentonite clay, affecting the performance of the repository. llitisation process was not obtained from the present simulations.

54 ENVIRONMENTAL SCIENCES↗

Corrective Action Decision Document/Closure Report for Corrective Action Unit 365: Baneberry Contamination Area, Nevada National Security Site, Nevada, Revision 0 With ROTC-1

Corrective Action Unit 365 comprises one corrective action site (CAS), CAS 08-23-02, U-8d Contamination Area. The purpose of this CADD/CR is to provide justification and documentation supporting the recommendation that no further corrective action is needed for CAU 365 based on the implementation of the corrective action of closure in place with a use restriction (UR). Corrective action investigation (CAI) activities were performed from January 18, 2011, through August 2, 2011, as set forth in the Corrective Action Investigation Plan for Corrective Action Unit 365: Baneberry Contamination Area. The purpose of the CAI was to fulfill data needs as defined during the data quality objective (DQO) process. The CAU 365 dataset of investigation results was evaluated based on a data quality assessment. This assessment demonstrated the dataset is complete and acceptable for use in supporting the DQO decisions. Investigation results were evaluated against final action levels (FALs) established in this document. A radiological dose FAL of 25 millirem per year was established based on the Remote Work Area exposure scenario (336 hours of annual exposure). Radiological doses exceeding the FAL were found to be present to the southwest of the Baneberry crater. It was also assumed that radionuclide levels present within the crater and fissure exceed the FAL. Corrective actions were undertaken that consisted of establishing a UR and posting warning signs for the crater, fissure, and the area located to the southwest of the crater where soil concentrations exceeded the FAL. These URs were recorded in the FFACO database; the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Facility Information Management System; and the NNSA/NSO CAU/CAS files. Therefore, NNSA/NSO provides the following recommendations: (1) No further corrective actions beyond what are described in this document are necessary for CAU 365. (2) A Notice of Completion to NNSA/NSO is requested from the Nevada Division of Environmental Protection for closure of CAU 365. (3) Corrective Action Unit 365 should be moved from Appendix III to Appendix IV of the FFACO.

54 ENVIRONMENTAL SCIENCES↗

Annular truncated plug nozzle flowfield and base pressure characteristics.

The flowfield and base pressure characteristics of an internal-external expansion, truncated plug nozzle are described over the pressure ratio range from 'open' wake to 'closed' wake conditions. The effect of plug length on these characteristics, including the process of wake 'closure' is also presented. An existing method for calculating the flowfield and base pressure, for 'closed' wake operation, is modified to include the internal shock wave generated near the shroud exit. The supersonic portion of the flow is calculated using rotational axisymmetric method of characteristics. The technique of Hartree is employed so that the downstream characteristic point locations can be chosen to fit the developing flowfield. An overexpansion technique is used to detect the internal shock wave in the vicinity of the shroud exit so that its effect on the plug base pressure could be determined. Good agreement between the analytical results and experimental data is obtained for 'closed' wake operations.

Sule, W. P.↗

DEPOSITION TANK CORROSION TESTING FOR ENHANCED CHEMICAL CLEANING POST OXALIC ACID DESTRUCTION

An Enhanced Chemical Cleaning (ECC) process is being developed to aid in the high level waste tank closure at the Savannah River Site. The ECC process uses an advanced oxidation process (AOP) to destroy the oxalic acid that is used to remove residual sludge from a waste tank prior to closure. The AOP process treats the dissolved sludge with ozone to decompose the oxalic acid through reactions with hydroxyl radicals. The effluent from this oxalic acid decomposition is to be sent to a Type III waste tank and may be corrosive to these tanks. As part of the hazardous simulant testing that was conducted at the ECC vendor location, corrosion testing was conducted to determine the general corrosion rate for the deposition tank and to assess the susceptibility to localized corrosion, especially pitting. Both of these factors impact the calculation of hydrogen gas generation and the structural integrity of the tanks, which are considered safety class functions. The testing consisted of immersion and electrochemical testing of A537 carbon steel, the material of construction of Type III tanks, and 304L stainless steel, the material of construction for transfer piping. Tests were conducted in solutions removed from the destruction loop of the prototype ECC set up. Hazardous simulants, which were manufactured at SRNL, were used as representative sludges for F-area and H-area waste tanks. Oxalic acid concentrations of 1 and 2.5% were used to dissolve the sludge as a feed to the ECC process. Test solutions included the uninhibited effluent, as well as the effluent treated for corrosion control. The corrosion control options included mixing with an inhibited supernate and the addition of hydroxide. Evaporation of the uninhibited effluent was also tested since it may have a positive impact on reducing corrosion. All corrosion testing was conducted at 50 C. The uninhibited effluent was found to increase the corrosion rate by an order of magnitude from less than 1 mil per year (mpy) for an inhibited waste to a range of 5 to 23.4 mpy, depending on sludge chemistry. F-area-based effluents were, in general, more corrosive. Effective corrosion control measures included evaporation, hydroxide additions and mixing with supernates containing a representative supernate chemistry (5 M hydroxide and 1.5 M nitrite). Corrosion rates with these measures were generally 0.2 mpy. The A537 carbon steel was found to be susceptible to pitting when the corrosion control measure involved mixing the ECC effluent with a supernate chemistry having minimal inhibitor concentrations (0.5 M hydroxide and 0.3 M nitrite). Corrosion rates in this case were near 1 mpy.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Compressor Stall Recovery Through Tip Injection Assessed

Aerodynamic stability is a fundamental limit in the compressor design process. The development of robust techniques for increasing stability has several benefits: enabling higher loading and fewer blades, increasing safety throughout a mission, increasing tolerance to stage mismatch during part-speed operation and speed transients, and providing an opportunity to match stages at the compressor maximum efficiency point, thus reducing fuel burn. Mass injection upstream of the tip of a high-speed axial compressor rotor is a stability enhancement approach known to be effective in suppressing stall in tip-critical rotors if the injection is activated before stall occurs. This approach to stall suppression requires that a reliable stall warning system be available. Tests have recently been performed to assess whether steady injection can also be used to recover from fully developed stall. If mass injection is effective in recovering from stall quickly enough to avoid structural damage or loss of engine power, then a stall warning system may not be required. The stall recovery tests were performed on a transonic compressor rotor at its design tip speed of 1475 ft/sec using four injectors evenly spaced around the compressor case upstream of the rotor. The injectors were connected to an external air source. In an actual engine application, the injected air would be supplied with compressor bleed air. The injectors were isolated from the air source by a fast-acting butterfly valve. With the injectors turned off, the compressor was throttled into stall. Air injection was then activated with no change in throttle setting by opening the butterfly valve. The compressor recovered from stall at a fixed throttle setting with the aid of tip injection. The unsteady operating characteristic of the rotor was measured during these tests using high-response pressure sensors located upstream and downstream of the rotor. The figure shows the results, where the unsteady pressure and mass flow are superimposed on the steady operating characteristic. The total injected mass flow was equal to 1.3 percent of the compressor flow. The solid line with no solid squares on it denotes the operating point during the beginning of throttle closure and the initial drop into stall. The gray traces denote the operating point during an additional throttle closure that occurred over the next 1200 rotor revolutions (4 sec). The dashed line denotes the recovery from stall that occurred during 90 rotor revolutions (0.3 sec) after the injectors were activated with no change in throttle setting. Tip injection not only recovers the compressor from stall, but also restores the compressor to its pre-stall level of pressure rise. In contrast, standard stall recovery schemes such as compressor bleed, stator vane actuation, or engine throttle modulation result in a loss of pressure rise across the compressor, which results in a loss of engine power.

Suder, Ken L.↗

Post-Closure Inspection, Sampling, and Maintenance Report for the Salmon, Mississippi, Site Calendar Year 2009

This report summarizes the annual inspection, sampling, and maintenance activities performed on and near the Salmon, Mississippi, Site in calendar year 2009. The draft Long-Term Surveillance and Maintenance Plan for the Salmon Site, Lamar County, Mississippi (DOE 2007) specifies the submittal of an annual report of site activities and the results of sample analyses. This report complies with the annual report requirement. The Salmon, MS, Site is located in Lamar County, MS, approximately 12 miles west of Purvis, MS, and about 21 miles southwest of Hattiesburg, MS The site encompasses 1,470 acres and is not open to the general public. The U.S. Department of Energy (DOE), a successor agency to the U.S. Atomic Energy Commission (AEC), is responsible for the long-term surveillance and maintenance of the site. The DOE Office of Legacy Management (LM) was assigned responsibility for the site effective October 1, 2006

54 ENVIRONMENTAL SCIENCES↗

Numerical study of Reynolds stress in compressible flows

A second order closure has been implemented in an implicit Navier-Stokes solver to study the behavior of the Reynolds stresses under the influence of severe pressure gradients. In the boundary layer zone, the strongly sheared character of the mean flow dominates the turbulence generation mechanisms. However, the pressure gradients also play a very important role for these processes, but at different locations within the boundary layer.

Vandromme, D.↗

The behaviour of turbulence anisotropy through shock waves and expansions

A second order closure has been implemented in an implicit Navier-Stokes solver to study the behavior of the Reynolds stresses under the influence of severe pressure gradients. In the boundary layer zone, the strongly sheared character of the mean flow dominates the turbulence generation mechanisms. However, the pressure gradients play also a very important role for these processes, but at different locations within the boundary layer. This aspect may be emphasized by the analysis of turbulence anisotropy through shock waves and expansions.

Minh, H. H.↗

Commercial fishery bycatch risk for large juvenile and adult smalltooth sawfish (Pristis pectinata) in Florida waters

1.Incidental catch of marine species can create ecological and economic issues, particularly for endangered species. The smalltooth sawfish (Pristis pectinata) is endemic to the Atlantic Ocean and listed as Endangered in the US Endangered Species Act. One of its major threats is bycatch mortality in commercial fisheries. 2.Despite the protection afforded by the US Endangered Species Act, smalltooth sawfish are still captured as bycatch in commercial fisheries. Acoustic and satellite tag data collected on 59 sawfish between 2011 and 2019 were analysed to assess commercial fishery bycatch risk for large juveniles and adults off Florida. This study focused on shrimp trawl, south-east coastal gillnet, and shark bottom longline fisheries, as these were identified in the recovery plan as having the greatest potential threats to recovery. 3.Bycatch risk associated with the shrimp trawl fishery was significantly higher than the other fisheries, indicating that this fishery currently poses the greatest threat to recovery. 4.Bycatch risk was concentrated in all seasons in the Gulf of Mexico adjacent to the lower Florida Keys for the shrimp trawl fishery, off Cape Canaveral in the south-east coastal gillnet fishery, and in the Atlantic Ocean adjacent to the Florida Keys in the shark bottom longline fishery. 5.Tagging location and sex were predictors of bycatch risk. Individuals tagged in Charlotte Harbor had the highest shrimp trawl bycatch risk. Females tagged in south Florida tended to reside in the deepest water, which is where shrimp trawl effort is highest. Therefore, females may be at more risk in these deeper waters. 6.Results from this study indicate a year-round closure of waters off south-west Florida to the shrimp trawl fishery between Charlotte Harbor and the western Florida Keys would reduce sawfish bycatch, and thus mortality, which is in line with recovery plan goals.

acoustic monitoring, bycatch, commercial fisheries↗

Design Study for a Global Magnetospheric Dynamics Mission

A successful design was developed, one with many advantages over the original mission. The time spent in orbit was more evenly spread over the region being investigated. The radiation close was significantly lower and the mission did not rely on gravity assist at the moon and thus did not have to make measurements that far out in the tail. A spacecraft design was developed that keeps interference from the engines to a minimum. The design however was quite specific for four spacecraft. It could not be easily scaled to five spacecraft for example. One problem was discovered that is a concern for all similar missions. Inter- spacecraft communication can determine the spacing of the vehicles easily and to the accuracy required. However, the orientation of the polyhedron with the spacecraft at its vertices is not well known for small separations. Ground station range measurements give the line of sight location well but not the angle around that vector. This is a problem any such mission needs to solve. Neither the navigation teams at Goddard nor at Lewis were willing to attempt to solve this problem. At the completion of the study a report was made to the AGU meeting in San Francisco and a paper published in the volume "Science Closure and Enabling Technologies for Constellation Class Missions". This paper is attached.

Russell, C. T.↗

Soil Sampling Results for Closure of a Portion of Solid Waste Management Unit #16

The U.S. Department of Energy/National Nuclear Security Administration (DOE/ NNSA) and National Technology & Engineering Solutions of Sandia, LLC (NTESS), the management and operating contractor for Sandia National Laboratories/California (SNL/CA), has prepared this soil sampling results report for closure of a portion of Solid Waste Management Unit (SWMU) #16. The entire network of SNL/CA sanitary sewer lines, including building laterals, was identified as SWMU #16 under a Resource Conservation and Recovery Act (RCRA) Facility Assessment conducted for SNL/CA in April 1991 (DOE 1992). Along with the previous SWMU #16 investigation results (SNL/CA 2019), the results of this investigation are intended to support closure decisions by the San Francisco Bay Regional Water Quality Control Board (RWQCB), as discussed below. SNL/CA personnel completed upgrading its sanitary sewer discharge network in 2019. These upgrades included installing new sections of underground lines and decommissioning certain sections of the old piping system by capping in place. To date, several sections of the sewer line have been abandoned-in-place by capping as new sewer lines were installed or flow was rerouted to other existing lines. To formally close these abandoned sections of the sewer line, the RWQCB required that SNL/CA personnel collect soil samples to be analyzed for contaminants potentially released from the sewer lines. SNL/CA personnel hired Weiss Associates (Weiss) of Emeryville, California to prepare a sampling and analysis plan, implement the sampling plan and report the results of the investigation under Purchase Order #2166257. The Sampling and Analysis Plan for Partial Closure of Solid Waste Management Unit #16 (SAP) was submitted to the RWQCB on August 14, 2020 by Weiss on behalf of SNL/CA. The RWQCB approved the SAP on September 30, 2020 after Weiss updated the method detection limit and reporting limits for total polychlorinated biphenyls (PCBs) and individual aroclors. Soil sampling was conducted in accordance with the SAP except that fewer locations were sampled due to site constraints, as discussed below. This report presents the results of the sampling effort and documents all associated field activities including borehole clearing, soil sample collection, storage and transportation to the analytical laboratories, borehole backfilling and surface restoration, and storage of investigation-derived waste (IDW) for future profiling and disposal by SNL/CA waste management personnel.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗