Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ir”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

UV extinction and IR emission in diffuse H2 regions

HII regions occupy a unique position in our understanding of the physical relationships between stars, the interstellar medium, and galactic structure. Observations show a complex interaction between a newly formed hot star and its surroundings. In particular, the ultraviolet radiation from the stars modifies the pre-existing dust, which again affects both the amount of ionizing radiation absorbed by the gas, and the infrared spectrum emitted by the heated dust. The aim of this project was to use UV and far-UV observations to gain information on the nebular dust, and to use this dust to model the far-IR emission, for a consistent picture of a few selected diffuse HII regions. Using archival data from the IUE and Voyager data banks and computed model atmospheres, we have deduced extinction curves for early-types stars. The requisite spectral resolution turned out to be a major task. We have successfully modelled these curves in terms of a multi-component, multi-size distribution of dust grains, and interpret the differences in the curves as primarily due to the presence or non-presence of intermediate size grains (0.01 to 0.04 micron). Much smaller (0.005 micron) grains must also be present. Finally, we have made calculations of the temperature fluctuations and the corresponding infra-red emission in such small grains.

Aannestad, Per A.↗
NASA NTRS1994

Venus O2 visible and IR nightglow: Implications for lower thermosphere dynamics and chemistry

The National Center for Atmospheric Research thermospheric general circulation model for the Venus thermosphere is modified to examine two observed night airglow features, both of which serve as sensitive tracers of the thermospheric circulation. New O2 nightglow data from the Pioneer Venus Orbiter (PVO) star tracker (O2 Herzberg II at 400-800 nm) and ground-based telescopes (O2 IR at 1.27 microns) yield additional model constraints for estimating Venus winds over 100-130 km. Atomic oxygen, produced by dayside CO2 photolysis peaking near 110 km, and transported to the nightside by the global wind system, is partially destroyed through three-body recombination, yielding the O2 Herzberg II visible nightglow. This emission is very sensitive to horizontal winds at altitudes between 100 and 130 km. Other trace species catalytic reactions also contribute to the production of the very strong nightside infrared (1.27 microns) emission. This paper examines the dynamical and chemical implications of these new data using the Venus thermospheric general circulation model (VTGCM) as an analysis tool. Three-dimensional calculations are presented for both solar maximum and solar medium conditions, corresponding to early PVO (1979-1981) and PVO entry (mid-1992) time periods. Very distinct periods are identified in which zonal winds are alternately weak and strong in the Venus lower thermosphere. VTGCM sensitivity studies are conducted to assess the impacts of potential changes in thermospheric zonal and day-to-night winds, and eddy diffusion on the corresponding nightglow intensities. It appears that cyclostrophic balance extends above 80 km periodically, owing to a reversal of the upper mesosphere latitudinal temperature gradient, and thereby producing strong zonal winds and correspondingly modified O2 nightglow distributions that are observed.

Bougher, S. W.↗
NASA NTRS1995

Atomic far-IR fine-structure line mapping of L1630, M17, and W3: Comparison of (O I) and (C II) distributions

We mapped the distribution of atomic far-IR line emission from (O I) and (C II) over parsec scales in the Galactic star-forming regions L1630, M17, and W3 using the MPE Far-Infrared Fabry-Perot Imaging spectrometer (FIFI) on board the NASA Kuiper Airborne Observatory. The lines mapped include (O I) 63 microns, (O I) 146 microns, and (C II) 158 microns. Comparison of the intensities and ratios of these lines with models of photodissociation regions (e.g., Tielens & Hollenbach 1985, ApJ, 344, 770) allows us to derive temperatures and densities of the primarily neutral atomic gas layers lying on the surfaces of UV-illuminated molecular gas. In general, the (C II) line arises ubiquitously throughout the molecular clouds while the (O I) lines are mainly confined to warm, dense gas (T is greater than 100 K, n is greater than 10(exp 4)/cu cm) near the sites of O and B stars. The distribution of (C II) in the star-forming clouds implies that the (C II) emission arises on the surfaces of molecular clumps throughout the clouds, rather than only at the boundary layer between molecular gas and H II regions.

Howe, J. E.↗
NASA NTRS1995

Panel discussion: The future of IR astronomy

A panel discussion was held on the future of IR astronomy. The chairman gave a brief introduction to current planned programs for NASA and other space agencies, followed by short contributions from the six panel members on a variety of special topics. After that, a short question and answer session was held.

Caroff, Lawrence J.↗
NASA NTRS1995

Single crystal silicon filaments fabricated in SOI: A potential IR source for a microfabricated photometric CO2 sensor

The objective of this project was to design, fabricate, and test single crystal silicon filaments as potential black body IR sources for a spectrophotometric CO2 sensing microsystem. The design and fabrication of the silicon-on-insulator (SOI) filaments are summarized and figures showing the composite layout of the filament die (which contains four filaments of different lengths -- 500 microns, 1 mm, 1.5 mm and 2 mm -- and equal widths of 15 microns) are presented. The composite includes four mask layers: (1) silicon - defines the filament dimensions and contact pads; (2) release pit - defines the oxide removed from under the filament and hence, the length of the released filament; (3) Pyrex pit - defines the pit etched in the Pyrex cap (not used); and (4) metal - defines a metal pattern on the contact pads or used as a contact hole etch. I/V characteristics testing of the fabricated SOI filaments is described along with the nitride-coating procedures carried out to prevent oxidation and resistance instability.

Tu, Juliana↗
NASA NTRS1996

IR Interference Filters Made Of Al Patterns On Si Substrates

Filters relatively thin and better accommodate convergent infrared beams. Infrared (IR) interference filters with pass bands centered at wavelength of about 70 micrometer made in form of aluminum patterns 1,000 Angstrom thick on both sides of silicon substrates 12 to 15 micrometer thick. Substrates, in turn, mounted on silicon frames 0.2 millimeter thick. Prototypes of class of miniature band-pass infrared filters small enough to be bonded to, and cooled with, infrared detectors.

Ksendzov, Alexander↗
NASA NTRS1996

The Role of Hydrogen in Small Amorphous Carbon Grains: The IR Spectrum

Preliminary results on the evolution of the IR spectrum of hydrogenated carbon grains as a function of heat treatment are presented. The transformation of C-H and C-C bonding configurations is considered and the correlation with other properties of grains, such as their microstructure, is analyzed.

Mennella, V.↗
NASA NTRS1996

Hot Carrier Dynamics in the X Valley in Si and Ge Measured by Pump-IR-Probe Absorption Spectroscopy

Si is the semiconductor of choice for nanoelectronic roadmap into the next century for computer and other nanodevices. With growing interest in Si, Ge, and Si(sub m)Ge(sub n) strained superlattices, knowledge of the carrier relaxation processes in these materials and structures has become increasingly important. The limited time resolution for earlier studies of carrier dynamics in Ge and Si, performed using Nd:glass lasers, was not sufficient to observe the fast cooling processes. In this paper, we present a direct measurement of hot carrier dynamics in the satellite X valley in Si and Ge by time-resolved infrared(IR) absorption spectroscopy, and show the potential of our technique to identify whether the X valley is the lowest conduction valley in semiconductor materials and structures.

Wang, W. B.↗
NASA NTRS1993

Detection of the 2165 Inverse Centimeter (4.619 Micron) XCN Band in the Spectrum of L1551 IRS 5

We report the detection of a broad absorption band at 2165 cm (4.619 microns) in the spectrum of L1551 IRS 5. New laboratory results over the 2200-2100 /cm wavenumber interval (4.55-4.76 microns), performed with realistic interstellar ice analogs, suggest that this feature is due to a CN-containing compound. We will refer to this compound as XCN. We also confirm the presence of frozen CO (both in nonpolar and polar matrices) through absorption bands at 2140 /cm (4.67 microns) and 2135 /cm (4.68 microns). The relative abundance of solid-state CO to frozen H2O is approx. 0.13 while the abundance of XCN seems comparable to that of frozen CO.

Tegler, Stephen C.↗
NASA NTRS1998

Low Power Polysilicon Sources for IR Applications

We have designed and fabricated polysilicon thin film infrared (IR) sources by micromachining technology. These sources are made with a lightly doped middle region for light emission and heavy doping of the supporting legs. The sources are fabricated on a 10 mm thick, low temperature process parameters in the fabrication of these silicon dioxide layer. Different doping levels were used to achieve various source resistances. From the power requirement to reach the required light emission versus source resistance curve it is seen that there exists a resistance value which minimizes the necessary input power.

Das, N. C.↗
NASA NTRS1989

Required Technologies for A 10-16 m UV-Visible-IR Telescope on the Moon

A successor to the Hubble Space Telescope, incorporating a 10 to 16 meter mirror, and operating in the UV-Visible-IR is being considered for emplacement on the Moon in the 21st Century. To take advantage of the characteristics of the lunar environment, such a telescope requires appropriate advances in technology. These technologies are in the areas of contamination/interference control, test and evaluation, manufacturing, construction, autonomous operations and maintenance, power and heating/cooling, stable precision structures, optics, parabolic antennas, and communications/control. This telescope for the lunar surface needs to be engineered to operate for long periods with minimal intervention by humans or robots. What is essential for lunar observatory operation is enforcement of a systems engineering approach that makes compatible all lunar operations associated with habitation, resource development, and science.

Johnson, Stewart W.↗
NASA NTRS1984

The Specular Reflectance of IR-Opaque Coatings

A reflecting-layer model of the specular reflectance of a rough, thick, absorbing, dielectric film has been developed and fitted to the spectra of seven optical-black coatings between 12 and 300 micrometers. The coatings were quite different. At 100 micrometers their reflectance varied by a factor of nearly 10(exp 3). The model determines optical constants and surface parameters, and indicates which parameters control reflectance in the far IR.

Smith, Sheldon M.↗
NASA NTRS1999

A High Spatial Resolution Study of Far IR Emission of Galaxies

This grant funded observations and data reduction on the Kuiper Airborne Observatory. The research project was successfully completed. New insights into the distribution of far infrared emission across star-forming galaxies was obtained, and student training was achieved. The efforts contributed towards new observing strategies that will impact future NASA missions. The results of the effort have been presented in several papers in the refereed literature, including: "Morphology of Far Infrared Emission in Galaxies". "Far Infrared Thermal Emission from the Inner Cooling Flow Region of NGC1275". "Distribution of Light in the'Dusty-Hand'Galaxy NGC2146". Presentations of the results of this program have also been given at the following meetings and symposia: "High Spatial Resolution Study of the Active Cooling Flow Galaxy NGC 1275" "The Extent of Far IR Emission in Luminous Galaxies".

Lester, Dan↗
NASA NTRS1999

Laboratory IR Detection of H2O, CO2 in Ion-Irradiated Ices Relevant to Europa

Hydrogen peroxide has been identified on Europa (Carlson et al. 1999) based in part on the 3.50 micron absorption feature observed in Galileo NIMS spectra. The observed feature was fitted with laboratory reflectance spectra of H2O + H2O2. Since condensed phase molecules on Europa (H2O, CO2, SO2, and H2O2) are bombarded with a significant flux of energetic particles (H(+), O(n+), S(n+) and e-), we examined the proton irradiation of H2O at 80 K and the conditions for the IR detection of H2O2 near 3.5 microns. Contrary to expectations, H2O2 was not detected if pure H2O ice was irradiated at 80 K. This was an unexpected result since, H2O2 was detected if pure H2O was irradiated at 18 K. We find, however, that if H2O ice contains either O2 or CO2 then H2O2 is detected after irradiation at 80 K (Moore and Hudson, 1999). The source of O2 for the H2O ice on Europa could come from surface interactions with the tenuous oxygen atmosphere, or from the bombardment of the surface by O(n+).

Moore, Marla H.↗
NASA NTRS2000

A High Spatial Resolution Study of Far IR Emission of Galaxies

This grant funded observations, data reduction, professional publications and travel for scientific efforts on the Kuiper Airborne Observatory. The research project was successfully completed. New insights into the distribution of far infrared emission across star forming regions was obtained, and student training was achieved. The efforts contributed towards new observing strategies, such as calibration and intercomparison of data from different infrared astronomical observing platforms, that will impact future NASA missions, such as SOFIA. The results of the effort have been presented in several papers in the refereed literature, including: "The Structure of IR Luminous Galaxies at 100 Microns". " Far Infrared Thermal Emission from the Inner Cooling Flow Region of NGC1275". "Distribution of Light in the "Dusty Hand" Galaxy NGC2146".

Caldwell, Barrie A.↗
NASA NTRS2000

IR Spectra and Bond Energies Computed Using DFT

The combination of density functional theory (DFT) frequencies and infrared (IR) intensities and experimental spectra is a very powerful tool in the identification of molecules and ions. The computed and measured isotopic ratios make the identification much more secure than frequencies and intensities alone. This will be illustrated using several examples, such as Mn(CO)n and Mn(CO)n-. The accuracy of DFT metal-ligand bond energies will also be discussed.

Bauschlicher, Charles↗
NASA NTRS2001

Effects of Palagonitic Dust Coatings on Visible, Near-IR, and Mossbauer Spectra of Rocks and Minerals: Implication for Mineralogical Remote Sensing of Mars

Visible, near-IR, and Mossbauer measurements on dust coated rocks and minerals show that a 300 5m thick layer is required to obscure the substrate for VNIR measurements and that a greater than 2000-micron-thick layer is required to obscure the substrate for Mossbauer measurements. Additional information is contained in the original extended abstract.

Morris, R.↗