Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Integrated optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Fiber-optic thermometer using Fourier transform spectroscopy

An integrated-optic Mach-Zender interferometer is used as a Fourier transform spectrometer to analyze the input and output spectra of a temperature-sensing thin-film etalon. This configuration provides a high degree of immunity to the effects of changes in the source spectrum, and it readily permits the interrogation of a number of different sensors using a single spectrometer. In addition, this system has a potentially low cost because it uses optical communications hardware that may in the future be manufactured in large quantities.

Beheim, Glenn↗

A new method for multi-bit and qudit transfer based on commensurate waveguide arrays

The faithful state transfer is an important requirement in the construction of classical and quantum computers. While the high-speed transfer is realized by optical-fibre interconnects, its implementation in integrated optical circuits is affected by cross-talk. The cross-talk between densely packed optical waveguides limits the transfer fidelity and distorts the signal in each channel, thus severely impeding the parallel transfer of states such as classical registers, multiple qubits and qudits. Here, we leverage on the suitably engineered cross-talk between waveguides to achieve the parallel transfer on optical chip. Waveguide coupling coefficients are designed to yield commensurate eigenvalues of the array and hence, periodic revivals of the input state. While, in general, polynomially complex, the inverse eigenvalue problem permits analytic solutions for small number of waveguides. We present exact solutions for arrays of up to nine waveguides and use them to design realistic buses for multi-(qu)bit and qudit transfer. Advantages and limitations of the proposed solution are discussed in the context of available fabrication techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical and holographic storage properties of F3, Cu, and Mg-doped lithium niobate

Several samples of iron, copper, and magnesium doped lithium niobate were tested to determine their storage properties which would be applicable to an optical data storage system and an integrated optics data preprocessor which makes use of holographic storage techniques. The parameters of interest were the diffraction efficiency, write power, write time, erase time, erase energy, and write sensitivity. Results of these parameters are presented. It was found that iron doped lithium niobate samples yielded the best results in all parameters except for a few percent higher diffraction efficiency in copper doped samples. The magnesium doped samples were extremely insensitive and are not recommended for use in holographic optical data storage and processing systems.

Beatty, M. E., III↗

Preparation of polymeric diacetylene thin films for nonlinear optical applications

A method for producing polymeric diacetylene thin films having desirable nonlinear optical characteristics has been achieved by producing amorphous diacetylene polymeric films by simultaneous polymerization of diacetylene monomers in solution and deposition of polymerized diacetylenes on to the surface of a transparent substrate through which ultraviolet light has been transmitted. These amorphous polydiacetylene films produced by photo-deposition from solution possess very high optical quality and exhibit large third order nonlinear optical susceptibilities, such properties being suitable for nonlinear optical devices such as waveguides and integrated optics.

Frazier, Donald O.↗

Development of Infrared Phase Closure Capability in the Infrared-Optical Telescope Array (IOTA)

We completed all major fabrication and testing for the third telescope and phase-closure operation at the Infrared-Optical Telescope Array (IOTA) during this period. In particular we successfully tested the phase-closure operation, using a laboratory light source illuminating the full delay-line optical paths, and using an integrated-optic beam combiner coupled to our Picnic-detector camera. This demonstration is an important and near-final milestone achievement. As of this writing, however, several tasks yet remain, owing to development snags and weather, so the final proof of success, phase-closure observation of a star, is now expected to occur in early 2002, soon after this report has been submitted.

Traub, Wesley A.↗

Spatio-spectral optical fission in time-varying subwavelength layers

Transparent conducting oxides are highly doped semiconductors that exhibit favourable optical features compared with metals, including reduced material losses, tuneable electronic and optical properties, and enhanced damage thresholds. Recently, the photonic community has renewed its attention towards these materials, recognizing their remarkable nonlinear optical properties in the near-infrared spectrum. The exceptionally large and ultrafast change in the refractive index, which can be optically induced in these compounds, extends beyond the boundaries of conventional perturbative analysis and makes this class of materials the closest approximation to a time-varying system. Here we report the spatio-spectral fission of an ultrafast pulse trespassing a thin film of aluminium zinc oxide with a non-stationary refractive index. By applying phase conservation to this time-varying layer, our model can account for both space and time refraction and explain, in quantitative terms, the spatial separation of both spectrum and energy. Our findings represent an example of extreme nonlinear phenomena on subwavelength propagation distances, which provides new insights into transparent conducting oxides’ transient optical properties. This can be critical for the ongoing research on photonic time crystals, on-chip generation of non-classical states of light, integrated optical neural networks, ultrafast beam steering and frequency-division multiplexing.

integrated optics↗

On-chip optical tweezers based on freeform optics

Since its advent in the 1970s, optical tweezers have been widely deployed as a preferred non-contact technique for manipulating microscale objects. On-chip integrated optical tweezers, which afford significant size, weight, and cost benefits, have been implemented, relying upon near-field evanescent waves. As a result, these tweezers are only capable of manipulation in near-surface regions and often demand high power since the evanescent interactions are relatively weak. We introduce on-chip optical tweezers based on freeform micro-optics, which comprise optical reflectors or refractive lenses integrated on waveguide end facets via two-photon polymerization. The freeform optical design offers unprecedented degrees of freedom to design optical fields with strong three-dimensional intensity gradients, useful for trapping and manipulating suspended particles in an integrated chip-scale platform. We demonstrate the design, fabrication, and measurement of both reflective and refractive micro-optical tweezers. The reflective tweezers feature a remarkably low trapping threshold power, and the refractive tweezers are particularly useful for multiparticle trapping and interparticle interaction analysis. Our integrated micro-optical tweezers uniquely combine a compact footprint, broadband operation, high trapping efficiency, and scalable integration with planar photonic circuits. This class of tweezers is promising for on-chip sensing, cell assembly, particle dynamics analysis, and ion trapping.

Yu, Shaoliang (ORCID:000000026072425X)↗

Luneburg lens and optical matrix algebra research

Planar, as opposed to channelized, integrated optical circuits (IOCs) were stressed as the basis for computational devices. Both fully-parallel and systolic architectures are considered and the tradeoffs between the two device types are discussed. The Kalman filter approach is a most important computational method for many NASA problems. This approach to deriving a best-fit estimate for the state vector describing a large system leads to matrix sizes which are beyond the predicted capacities of planar IOCs. This problem is overcome by matrix partitioning, and several architectures for accomplishing this are described. The Luneburg lens work has involved development of lens design techniques, design of mask arrangements for producing lenses of desired shape, investigation of optical and chemical properties of arsenic trisulfide films, deposition of lenses both by thermal evaporation and by RF sputtering, optical testing of these lenses, modification of lens properties through ultraviolet irradiation, and comparison of measured lens properties with those expected from ray trace analyses.

Wood, V. E.↗

Buried-Dielectric-Microstrip Network

Problem of obtaining very-broadband frequency response resolved with buried-dielectric-microstrip matching network incorporated into infraredwaveguide structure. Waveguide modulator structure represents state-of-the-art of integrated optical devices: Has three-dimensional shape to accommodate three quarter-wavelength-transformers for microwave impendance matching at both input and output terminals. Microwave network, along with microstrip line designed with aid of computer, integrated with optical waveguide and used to tune line-selectable CO2 laser that provides total tuning range of 30 GHz in two sidebands.

Cheo, P. K.↗

Proposed Longitudinal Profile Diagnostics for Optical Stochastic Cooling of Stored Electrons in the IOTA Ring

One of the predicted signatures of successful optical stochastic cooling (OSC) in the Fermilab Integrable Optics Test Accelerator (IOTA) ring is reduction of the bunch length. The IOTA OSC experiment is designed for a low nominal beam current (~0.1 microAmps of 100-MeV electrons) to reduce intrabeam scattering (IBS), and during cooling, OSC is expected to reduce the bunch length from ~200 ps to ~130 ps*. These equilibrium bunch lengths can be measured using a streak camera and the optical synchrotron radiation (OSR) generated in a ring dipole by the circulating beam. A similar measurement was previously performed at the Advanced Photon Source with a Hamamatsu C5680 synchroscan streak camera operating at 117.3 MHz**. In this case, synchronous summing of OSR resulted in a bunch length measurement of 276 ± 30 ps using only 57 electrons circulating at 425 MeV. At IOTA, an existing streak camera has been modified to operate at the 11th harmonic of the ring’s revolution frequency of 7.50 MHz and has been installed on an OSR port in support of the OSC experiments. The integrated system will have sufficient sensitivity and resolution for measuring the evolution and equilibrium values of the bunch length during OSC experiments.

Lumpkin, Alex H.↗

Concerted Mitigation of O···H and C(π)···H Interactions Prospects Sixfold Gain in Optical Nonlinearity of Ionic Stilbazolium Derivatives

DAST (4-dimethylamino-N-methyl-4-stilbazolium tosylate) is the most commercially successful organic nonlinear optical (NLO) material for frequency-doubling, integrated optics, and THz wave applications. Its success is predicated on its high optical nonlinearity with concurrent sufficient thermal stability. Many chemical derivatives of DAST have therefore been developed to optimize their properties; yet, to date, none have surpassed the overall superiority of DAST for NLO photonic applications. This is perhaps because DAST is an ionic salt wherein its NLO-active cation is influenced by multiple types of subtle intermolecular forces that are hard to quantify, thus, making difficult the molecular engineering of better functioning DAST derivatives. Here, we establish a model parameter, ηinter, that isolates the influence of intermolecular interactions on second-order optical nonlinearity in DAST and its derivatives, using second-harmonic generation (SHG) as a qualifier; by systematically mapping intercorrelations of all possible pairs of intermolecular interactions to ηinter, we uncover a relationship between concerted intermolecular interactions and SHG output. This correlation reveals that a sixfold gain in the intrinsic second-order NLO performance of DAST is possible, by eliminating the identified interactions. This prediction offers the first opportunity to systematically design next-generation DAST-based photonic device nanotechnology to realize such a prospect.

36 MATERIALS SCIENCE↗

Enhanced four-wave mixing in graphene-silicon slow-light photonic crystal waveguides

We demonstrate the enhanced four-wave mixing of monolayer graphene on slow-light silicon photonic crystal waveguides. 200-μm interaction length, a four-wave mixing conversion efficiency of −23 dB is achieved in the graphene-silicon slow-light hybrid, with an enhanced 3-dB conversion bandwidth of about 17 nm. Our measurements match well with nonlinear coupled-mode theory simulations based on the measured waveguide dispersion, and provide an effective way for all-optical signal processing in chip-scale integrated optics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of light propagation for a crossing of thin silicon wires using vertical tunnelling coupling with a thick optical channel waveguide

Using silicon photonic wires in a silicon-on-insulator structure as an example, we examine the problem of crossings of thin, high-index-contrast channel waveguides. To ensure high optical wave transmission efficiency at as low a level of parasitic scattering as possible, we propose using a structure with vertical coupling between a thin tapered silicon waveguide and a thick polymer waveguide, separated by a thin buffer oxide layer. Numerical simulation is used to find conditions under which such a structure (3 × 90 μm in dimensions) ensures 98 % and 99 % transmission efficiency at ∼1.55 μm in 35- and 26-nm spectral ranges, respectively, for direct propagation and 99.99 % transmission in the transverse direction. The optical element in question is proposed for use in optical microchips with multiple channel waveguide crossings. (integrated optical waveguides)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Light Optics for Optical Stochastic Cooling

In Optical Stochastic Cooling (OSC) radiation generated by a particle in a "pickup" undulator is amplified and transported to a downstream "kicker" undulator where it interacts with the same particle which radiated it. Fermilab plans to carry out both passive (no optical amplifier) and active (optical amplifier) tests of OSC at the Integrable Optics Test Accelerator (IOTA) currently in construction*. The performace of the optical system is analyzed with simulations in Synchrotron Radiation Workshop (SRW) accounting for the specific temporal and spectral properties of undulator radiation and being augmented to include dispersion of lens material.

43 PARTICLE ACCELERATORS↗

The EDGE-CALIFA Survey: Interferometric Observations of 126 Galaxies with CARMA

We present interferometric CO observations, made with the Combined Array for Millimeter-wave Astronomy (CARMA) interferometer, of galaxies from the Extragalactic Database for Galaxy Evolution survey (EDGE). These galaxies are selected from the Calar Alto Legacy Integral Field Area (CALIFA) sample, mapped with optical integral field spectroscopy. EDGE provides good-quality CO data (3σ sensitivity Σ{sub mol}∼11 M{sub ⊙} pc{sup −2} before inclination correction, resolution ∼1.4 kpc) for 126 galaxies, constituting the largest interferometric CO survey of galaxies in the nearby universe. We describe the survey and data characteristics and products, then present initial science results. We find that the exponential scale lengths of the molecular, stellar, and star-forming disks are approximately equal, and galaxies that are more compact in molecular gas than in stars tend to show signs of interaction. We characterize the molecular-to-stellar ratio as a function of Hubble type and stellar mass and present preliminary results on the resolved relations between the molecular gas, stars, and star-formation rate. We then discuss the dependence of the resolved molecular depletion time on stellar surface density, nebular extinction, and gas metallicity. EDGE provides a key data set to address outstanding topics regarding gas and its role in star formation and galaxy evolution, which will be publicly available on completion of the quality assessment.

79 ASTRONOMY AND ASTROPHYSICS↗

Fiber optic sensors

A survey of the developments in the field of fiber optics sensor technology is presented along with a discussion of the advantages of optical measuring instruments as compared with electronic sensors. The two primary types of fiber optics sensors, specifically those with multiwave fibers and those with monowave fibers, are described. Examples of each major sensor type are presented and discussed. Multiwave detectors include external and internal fiber optics sensors. Among the monowave detectors are Mach-Zender interferometers, Michelson interferometers, Sagnac interferometers (optical gyroscopes), waveguide resonators, and polarimeter sensors. Integrated optical sensors and their application in spectroscopy are briefly discussed.

Hesse, J.↗

GaInAs-AlInAs heterostructures for optical devices grown by MBE

The band gap of Ga(0.47)In(0.53)As corresponds to an emission wavelength of about 1.65 microns. Lasers have been produced with Al(0.48)In(0.52)As as cladding layers operating at room temperature. The peak emission of Ga(0.47)In(0.53)As can be continuously varied from 1.65 to 1.2 microns by the use of the multiquantum well structures. This range of wavelengths covers the minimum loss and dispersion in optical fibers and will be applicable to integrated optics. Double heterostructure broad area lasers have been fabricated using AlInAs as cladding layers to the GaInAs active layer. Room temperature threshold current densities of 4.3 kA/sq cm have been obtained for lasers with a 4500 A active region. The first data on GaInAs/AlInAs quantum well emitters will be presented. Photoluminescence of 4 K from quantum well layers of 100, 150, and 180 A with 150 A AlInAs barrier layers produced emission at 1.27, 1.35, and 1.41 microns, respectively. Ga(0.47)In(0.52)As quantum well LEDs have also been produced which emit at 1.34 microns.

Welch, D. F.↗

Electro-Optical Resonant Phase Modulator

Electro-optical phase modulator includes electro-optical crystal in resonant cavity suitable for use in transmitting digital data on laser beam at data rate of 10 MHz. Switching voltages applied to crystal, thereby switching cavity onto and off resonance, and large phase dispersion occurring near resonance provides output phase modulation. Driving voltages smaller than those of nonresonant modulators. Laser-damage thresholds of apparatus, incorporating bulk optics, inherently greater than modulators based on integrated optics.

Chen, Chien-Chung↗