SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A data acquisition system was developed to provide more accurate and consistent measurement of the degradation of solar arrays. A technique was developed for in-situ measurement of photovoltaic panels of sufficient quality to permit evaluation of electrical performance over extended periods of several years.
In situ stratospheric measurements of the concentrations of the reservoir species HNO3 and HCl made during two flights of the high-resolution (0.0005/cm) balloon-borne laser in situ sensor instrument from Palestine, Texas, are reported. A measured HNO3 volume mixing ratio of 4.3 parts per billion by volume (ppbv) at 31 km altitude is about 1 ppbv larger than previously reported measurements at 32 deg N. An HCl mixing ratio of 1.6 ppbv at 29 km is in agreement with values obtained from earlier remote sensing techniques within the experimental uncertainties. Upper limits at 31 km of 0.4 ppbv for H2O2 and 0.2 ppbv for HOCl are also derived from analyses of spectra recorded near 1252/cm.
In situ correlative measurements were obtained with a NASA aircraft in support of two NASA airborne remote sensors participating in the Environmental Protection Agency's 1980persistent elevated pollution episode (PEPE) and Northeast regional oxidant study (NEROS) field program in order to provide data for evaluating the capability of two remote sensors for measuring mixing layer height, and ozone and aerosol concentrations in the troposphere during the 1980 PEPE/NEROS program. The in situ aircraft was instrumented to measure temperature, dewpoint temperature, ozone concentrations, and light scattering coefficient. In situ measurements for ten correlative missions are given and discussed. Each data set is presented in graphical and tabular format aircraft flight plans are included.
We examine the feasibility of using airborne lidar data to: 1) infer CRC Convair-580 profiles of submicrometer fraction (SMF) over land (which is the fraction of aerosols with diameters less than 1 micrometer and is closely related to FMF) and 2) provide a proxy for CCN. If these initial Aerosol Extinction Aerosol Effective Radius feasibility studies prove successful, we will then apply these methodologies in subsequent studies to examine the feasibility of using CALIPSO data in a similar manner. We use data acquired by the NASA Langley Research Center airborne High Spectral Resolution Lidar (HSRL) during several recent field missions conducted by NASA, the Department of Energy, and NOAA. The airborne HSRL, which has acquired over 300 hours of data coincident with CALIPSO overpasses, measures aerosol extinction (532 nm), backscatter (532 and 1064 nm), and depolarization (532 and 1064 nm) profiles and thereby provides a dataset directly applicable to the CALIPSO measurements. During several of these field campaigns, airborne in situ measurements were acquired simultaneously within the HSRL “curtains” thereby facilitating direct correlations of the lidar observables to in situ measurements of particle size and composition, including SMF and CCN concentration. Previous studies have used simultaneous in situ measurements of SMF and Angström exponents derived from in situ scattering (Anderson et al., 2005) and remote sensing extinction (Redemann et al. 2009) measurements to build empirical relationships between these parameters. We adopt a similar approach and investigate relationships between the lidar observables, such as backscatter and extinction Angström exponents, with the coincident airborne in situ measurements of SMF and CCN concentration.
This campaign is a follow-up project to the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility field campaign entitled Cloud Droplet Measurement System for TBS that was focused on integration of the Mesa Photonics' cloud droplet measurement system (CDMS) into the DOE ARM tethered balloon system (TBS) and its initial field testing at ARM’s Southern Great Plains (SGP) atmospheric observatory in February–March 2020. The CDMS performs in situ measurement of droplet size distribution function and droplet number density in clouds. These characteristics are important cloud microphysical properties that are critical input parameters for atmospheric models and are also useful for proper calibration and validation of performance of other atmospheric measurement instrumentation. The overall goals of this campaign were to deploy the CDMS on the DOE ARM TBS, test its compatibility with the TBS under relevant conditions, and perform a series of in-cloud measurements at the third ARM Mobile Facility (AMF3) at Oliktok Point, Alaska. The TBS flights were conducted on November 12–19, 2020.
Mineral-fluid interfaces are the principal sites of geochemical processes near Earth’s surface, hosting chemical reactions that play a fundamental role in (bio)geochemical cycles and in the fate and transport of anthropogenic contaminants, and that effectively control the compositions of soil and water environments. These complex interfaces are critical for our energy and environmental future. The mineral-fluid interface has been studied in an unprecedented level of detail with both experimental and computational approaches, separately and in combination. However, conspicuously missing from studies of the mineral-fluid interface are direct measurements of the energies of ion sorption and exchange. The literature on energetics and enthalpies of exchange, adsorption, dissolution, precipitation, and surface protonation reactions, especially those directly supported by experimental data, remains scarce despite their fundamental nature. The overarching goal of this project is to complete a systematic study of the thermodynamics properties of interfacial reactions at four MO surfaces (Rutile (α-TiO2), Quartz (SiO2), boehmite (γ-AlOOH) and goethite (α-FeOOH)) through the application and construction of novel flow adsorption microcalorimetry techniques and instrumentations. These unique and specialized microcalorimeters will operate at various temperatures and solution chemical compositions allowing for in-situ measurements across metal oxides and ligands of various characteristics. The overall research goal will be accomplished by completing the following three specific objectives (O): O1) Determine the energetics of surface protonation and deprotonation, ion exchange and ligand sorption reactions; O2) Investigate the surface charge thermodynamic properties under a range of temperature and solution chemical compositions; and O3) Develop predictive trends of the interplay between MO structure, surface coverage and surface reactivity. In addition to key thermodynamics parameters, calorimetric measurements provide a wealth of mechanistic information about reactions energetics and kinetics, surface charge characteristics, and structure-reactivity or selectivity relationships, all obtained in-situ and in real-time. This report includes science highlights from various projects completed over the performance period of the project. Also listed are dissemination opportunities, people supported on the grant and the impact on available physical resources and the discipline as a whole.
Estimation of snow characteristics from airborne radar measurements would complement In-situ measurements. While In-situ data provide more detailed information than radar, they are limited in their space-time sampling. In the absence of significant cloud water contents, dual-wavelength radar data can be used to estimate 2 parameters of a drop size distribution if the snow density is assumed. To estimate, rather than assume, a snow density is difficult, however, and represents a major limitation in the radar retrieval. There are a number of ways that this problem can be investigated: direct comparisons with in-situ measurements, examination of the large scale characteristics of the retrievals and their comparison to cloud model outputs, use of LDR measurements, and comparisons to the theoretical results of Passarelli(1978) and others. In this paper we address the first approach and, in part, the second.
Abstract Gross primary production (GPP) by terrestrial ecosystems is a key quantity in the global carbon cycle. The instantaneous controls of leaf‐level photosynthesis are well established, but there is still no consensus on the mechanisms by which canopy‐level GPP depends on spatial and temporal variation in the environment. The standard model of photosynthesis provides a robust mechanistic representation for C 3 species; however, additional assumptions are required to “scale up” from leaf to canopy. As a consequence, competing models make inconsistent predictions about how GPP will respond to continuing environmental change. This problem is addressed here by means of an empirical analysis of the light use efficiency (LUE) of GPP inferred from eddy covariance carbon dioxide flux measurements, in situ measurements of photosynthetically active radiation (PAR), and remotely sensed estimates of the fraction of PAR (fAPAR) absorbed by the vegetation canopy. Focusing on LUE allows potential drivers of GPP to be separated from its overriding dependence on light. GPP data from over 100 sites, collated over 20 years and located in a range of biomes and climate zones, were extracted from the FLUXNET2015 database and combined with remotely sensed fAPAR data to estimate daily LUE. Daytime air temperature, vapor pressure deficit, diffuse fraction of solar radiation, and soil moisture were shown to be salient predictors of LUE in a generalized linear mixed‐effects model. The same model design was fitted to site‐based LUE estimates generated by 16 terrestrial ecosystem models. The published models showed wide variation in the shape, the strength, and even the sign of the environmental effects on modeled LUE. These findings highlight important model deficiencies and suggest a need to progress beyond simple “goodness of fit” comparisons of inferred and predicted carbon fluxes toward an approach focused on the functional responses of the underlying dependencies.
Basic research, under this project, has led to new fundamental discoveries in the effect of electric field (and temperature) on diffusion kinetics, electroluminescence and electronic conductivity in ceramic materials. For example, yttria stabilized zirconia sinters in just seconds well below 1000°C, while, at the same time, exhibiting a highly non-linear rise in conductivity, and intense electroluminescence. The phenomenon has been shown to occur in nearly all ceramics whether they are ionic or electronic conductors, or insulators. The rise in conductivity leads to Joule heating but in-situ measurements with a platinum standard at APS and Brookhaven (NSLS-II) have shown that the temperatures are much below what would have been needed to sinter in a few seconds. We have explored the hypothesis that huge concentrations of Frenkel pairs of vacancies and interstitials are produced. While these point defects accelerate sintering (by the interstitials being transported to the pores and the vacancies to the grain boundaries), they may also produce electron-hole pairs which can impart high electrical conductivity or recombine to emit photons. Many measurements, including in-situ measurements of lattice expansion are consistent with this hypothesis. However, the energy barrier for generating Frenkels in zirconia for example is much larger than can be expected at temperature and electrical fields in these experiments. Most recent work suggests that short wavelength phonons play a critical role in the genesis of the “flash” phenomenon. For example, the Debye temperature has been shown to be the lower bound for initiating flash. Molecular dynamics simulations have shown that large concentrations of Frenkel pairs can form under the proliferation of “optical” phonons at the edge of the Brillouin zone, that is with a wavelength at or below the lattice parameter. This project has led to the development of new experimental techniques as well as a software hardware interface for process and control and data analysis in real time, with a time scale of less than one second. This approach spells a new paradigm in materials science research. It potential impact on high rate manufacturing is self evident.
Abstract. This study presents the unique capability of the Department of Energy (DOE) ArcticShark – a mid-size fixed-wing uncrewed aerial system (UAS) – for measuring vertically resolved atmospheric properties over the Southern Great Plains (SGP) of the United States. Focusing on atmospheric states, such as ambient temperature, wind, and aerosol properties, we overview measurements from 32 research flights (∼ 97 flight hours) in 2023. The August operations, aided by a visual observer on a chase plane, allowed for extensive UAS coverage, surpassing typical UAS operation envelopes. Our data from March, June, and August 2023 reveal distinctive seasonal patterns within the atmospheric column through unique chemical composition measurements. In situ measurements combined with remote sensing retrievals and radiosonde measurements provided valuable insights into their consistency and complementarity. Furthermore, we demonstrate the capabilities of the ArcticShark through several case studies, including the analyses of correlations between UAS-derived atmospheric profiles and conventional radiosonde measurements, as well as the derivation of vertically resolved profiles of aerosol chemical, optical, and microphysical properties. These case studies highlight the versatility of the ArcticShark UAS as a powerful tool for comprehensive atmospheric research, effectively bridging data gaps and enhancing our understanding of vertical atmospheric structures in the region.
Nitric oxide has been measured in situ between 38.4 and 29.8 km by a new technique, photoionization mass spectrometry. Data indicate a peak mixing ratio of 5.7 plus or minus 0.35 ppbv at 37.5 km and only 0.2 plus or minus 0.2 ppbv at 32.8 km with a sharp gradient in concentration between 33 and 34 km. Simultaneous in-situ measurements of the ozone concentration show no significant feature at that altitude. The rapid decrease in mixing ratio is not predicted by current theory.
During the encounter of the International Cometary Explorer (ICE) with comet P/Giacobini-Zinner, the radio astronomy experiment observed occultation and propagation effects on several distant radio sources. The observations of the partial occultation of the galactic radio source between 360 and 1000 kHz show that the three-dimensional large scale structure of the coma is consistent with the structure determined from in-situ measurements made along the encounter trajectory. In addition, these observations remove a previously existing ambiguity in the position of the galactic source. Between 110 and 360 kHz the earth source is broadened by scattering by the comet random density inhomogeneities. The amount of broadening indicates that the electron density fluctuations measured in situ by ICE along its trajectory (100 pct fluctuations with a scale length of 1000-2000 km over a path length of 100,000 km) exist with the same properties in the perpendicular direction.
The expansion of a two-electron-population, collisionless plasma into vacuum has been examined in detail. Plasma density, plasma potential, electric field, and particle disribution functions have been measured in situ. It is demonstrated that the presence of a low-pressure (P not less than 2 x 10 to the -5th torr) background neutral gas modifies the expansion of the plasma. A new plasma source creating dense, pulsed discharge plasma with a low background pressure (P not greater than 2 x 10 to the -6th torr) has been developed to perform in situ measurements of the temporal and spatial plasma evolution during its expansion into vacuum.
The present study discusses SOHO (Solar and Heliospheric Observatory), a satellite with a pointing stability of 1 arcsec that will be launched in 1995 to the L1 Lagrangian point between the sun and the earth. In situ measurements, at approximately 1 AU, are to trace the results of solar wind expansion. The SOHO mission aims are discussed: to obtain long and uninterrupted series of solar oscillation measurements either in flux or in velocity in order to sound the solar interior using high resolution in the frequency domain; to probe the upper atmosphere with high-resolution UV/EUV imager/spectrometers and UV/visible coronagraphs and photometers in order to bring new constraints on the coronal heating; and to measure in situ the solar wind flow in front of the earth and thus establish the link between the sun and the near-earth environment. The satellite and instrumentation are reviewed in relation to the specific capabilities that they offer.
The NASA Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) measures spectra from 370 to 2500 nm with nominally 10-nm sampling and resolution. The spectra are acquired as images with an 11 km width and up to 800 km length from the ER-2 platform or 2.1 km width and 160 km length from the Twin Otter platform. AVIRIS measurements are used for a range of Earth science research and application objectives. The molecular absorption and particle scattering properties expressed in the calibrated AVIRIS measurements are used. For both science research and application objectives, calibration of the AVIRIS spectra is required to produce useful results. Each year prior to the flight season AVIRIS is calibrated in the laboratory. However, the temperature, pressure, vibration, and observational geometry, as well as mechanical, electrical, and operational interfaces of the laboratory are different than the environment on board the airborne platform. To validate the calibration of AVIRIS in the flight environment, an inflight calibration experiment is orchestrated at the beginning of each flight season. In most years additional inflight calibration experiments occur towards the middle and end of the flight season as well. For an inflight calibration experiment, AVIRIS acquires airborne data over a designated calibration target. In concert with the airborne data acquisition, surface and atmospheric properties at the calibration target are measured in situ. These in situ measurements are used to constrain a radiative transfer code and predict the radiance incident at the AVIRIS instrument from the calibration target. This prediction is compared with the AVIRIS-measured radiance to validate the calibration of AVIRIS in the flight environment. Additional properties (such as the AVIRIS inflight measurement precision) are determined as well. This paper presents measurements, analyses, and results from the inflight calibration experiment held on the dry lake bed surface of Rogers Dry Lake, California, on June 5, 2000.
Even though the Sea Surface Salinity (SSS) retrieved from Aquarius are generally very close to in-situ measurements, the level of similarity varies with the region and with the circumstances of the observations (wind speed, sea surface temperature, etc.). SSS is currently retrieved from the brightness temperatures measured by Aquarius and applying the current theoretical model for the propagation and emission of the natural thermal radiation. In this contribution we consider an alternative retrieval approach based on a Neural Network (NN) with the goal of improving the subsets of Aquarius SSS data that are in poorer agreement within-situ measurements. The subset considered here are the SSS retrieved at latitudes higher than 30 ̊. The output of the NN approach are compared against in-situ measurements using four statistical metrics (correlation coefficient, bias, RMSD and 5% trimmed range). The output of the NN and the nominal Aquarius SSS are compared against SSS values from in-situ measurements and from ocean models. From these comparisons it appears that the output of the NN matches the in-situ measurements better than the nominal Aquarius SSS.
The NASA SMAP (Soil Moisture Active Passive) mission conducted the SMAP Validation Experiment 2015 (SMAPVEX15) in order to support the calibration and validation activities of SMAP soil moisture data products. The main goals of the experiment were to address issues regarding the spatial disaggregation methodologies for improvement of soil moisture products and validation of the in situ measurement upscaling techniques. To support these objectives high-resolution soil moisture maps were acquired with the airborne PALS (Passive Active L-band Sensor) instrument over an area in southeast Arizona that includes the Walnut Gulch Experimental Watershed (WGEW), and intensive ground sampling was carried out to augment the permanent in situ instrumentation. The objective of the paper was to establish the correspondence and relationship between the highly heterogeneous spatial distribution of soil moisture on the ground and the coarse resolution radiometer-based soil moisture retrievals of SMAP. The high-resolution mapping conducted with PALS provided the required connection between the in situ measurements and SMAP retrievals. The in situ measurements were used to validate the PALS soil moisture acquired at 1-km resolution. Based on the information from a dense network of rain gauges in the study area, the in situ soil moisture measurements did not capture all the precipitation events accurately. That is, the PALS and SMAP soil moisture estimates responded to precipitation events detected by rain gauges, which were in some cases not detected by the in situ soil moisture sensors. It was also concluded that the spatial distribution of the soil moisture resulted from the relatively small spatial extents of the typical convective storms in this region was not completely captured with the in situ stations. After removing those cases (approximately10 of the observations) the following metrics were obtained: RMSD (root mean square difference) of0.016m3m3 and correlation of 0.83. The PALS soil moisture was also compared to SMAP and in situ soil moisture at the 36-km scale, which is the SMAP grid size for the standard product. PALS and SMAP soil moistures were found to be very similar owing to the close match of the brightness temperature measurements and the use of a common soil moisture retrieval algorithm. Spatial heterogeneity, which was identified using the high-resolution PALS soil moisture and the intensive ground sampling, also contributed to differences between the soil moisture estimates. In general, discrepancies found between the L-band soil moisture estimates and the 5-cm depth in situ measurements require methodologies to mitigate the impact on their interpretations in soil moisture validation and algorithm development. Specifically, the metrics computed for the SMAP radiometer-based soil moisture product over WGEW will include errors resulting from rainfall, particularly during the monsoon season when the spatial distribution of soil moisture is especially heterogeneous.
In-situ measurements of ambient electron densities with satellite-borne cylindrical probes exhibit periodic variations synchronous with the satellite's spin cycle. Representing these fluctuations as a superposition of effects attributable to both the presence of the satellite wake and the geomagnetic field leads to a model of the modulations of accelerated electron current to cylindrical probes in which one modulation component displays current variations dependent upon the probe-velocity angle (psi) and the other displays variations dependent upon the angle between the probe axis and the geomagnetic field lines (beta). The modulations produce an electron current decrease whenever the probe axis rotates into the satellite wake or whenever the probe axis rotates toward alignment with the geomagnetic field lines. With increasing altitude, the modulation dependent upon psi decreases whereas the modulation dependent upon beta increases. The analysis results imply that the most accurate of atmospheric electron densities by satellite-borne cylindrical probes come from measurements taken out of the satellite's wake and when the probe axis is within 20 degrees of being perpendicular to the geomagnetic field lines.