Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INSOLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Subdecadal Holocene Warm-Season Temperature Variability in Central Europe Recorded by Biochemical Varves

Paleoclimate data provide important information about the character of natural climate variability. However, records with sufficient length and resolution to resolve high-frequency (decadal-scale) variability across the Holocene are scarce. We present a 10,800-year reconstruction of spring and summer temperature at three-year resolution based on biochemical varves from Lake $\dot{Z}abi$$\acute{n}skie$, Poland. The reconstruction is based on Ca/Ti ratio, which are significantly correlated with instrumental spring and summer temperature spanning 240 years. Major climate events of the Holocene period are represented in the reconstruction, including the Holocene Thermal Maximum, 8.2 ka Event, Medieval Climate Anomaly, and Little Ice Age. A low-frequency 8,000-year decreasing trend in warm-season temperatures is driven by declining summer insolation. Temperature variability is highest during the early Holocene, likely related to warmer and drier conditions. The rate of warming during the past 90 years is extremely unusual, if not unprecedented for the Holocene, based on our reconstruction.

58 GEOSCIENCES↗

Regional and global forcing of glacier retreat during the last deglaciation

The ongoing retreat of glaciers globally is one of the clearest manifestations of recent global warming associated with rising greenhouse gas concentrations. By comparison, the importance of greenhouse gases in driving glacier retreat during the most recent deglaciation, the last major interval of global warming, is unclear due to uncertainties in the timing of retreat around the world. Here we use recently improved cosmogenic-nuclide production-rate calibrations to recalculate the ages of 1,116 glacial boulders from 195 moraines that provide broad coverage of retreat in mid-to-low-latitude regions. This revised history, in conjunction with transient climate model simulations, suggests that while several regional-scale forcings, including insolation, ice sheets and ocean circulation, modulated glacier responses regionally, they are unable to account for global-scale retreat, which is most likely related to increasing greenhouse gas concentrations.

54 ENVIRONMENTAL SCIENCES↗

High-performance piezoelectric composites via β phase programming

Polymer-ceramic piezoelectric composites, combining high piezoelectricity and mechanical flexibility, have attracted increasing interest in both academia and industry. However, their piezoelectric activity is largely limited by intrinsically low crystallinity and weak spontaneous polarization. Here, we propose a Ti 3 C 2 T x MXene anchoring method to manipulate the intermolecular interactions within the all-trans conformation of a polymer matrix. Employing phase-field simulation and molecular dynamics calculations, we show that OH surface terminations on the Ti 3 C 2 T x nanosheets offer hydrogen bonding with the fluoropolymer matrix, leading to dipole alignment and enhanced net spontaneous polarization of the polymer-ceramic composites. We then translated this interfacial bonding strategy into electrospinning to boost the piezoelectric response of samarium doped Pb (Mg1/3Nb 2/3 )O 3 -PbTiO 3 /polyvinylidene fluoride composite nanofibers by 160% via Ti 3 C 2 T x nanosheets inclusion. With excellent piezoelectric and mechanical attributes, the as-electrospun piezoelectric nanofibers can be easily integrated into the conventional shoe insoles to form a foot sensor network for all-around gait patterns monitoring, walking habits identification and Metatarsalgi prognosis. This work utilizes the interfacial coupling mechanism of intermolecular anchoring as a strategy to develop high-performance piezoelectric composites for wearable electronics.

36 MATERIALS SCIENCE↗

New particle formation leads to cloud dimming

New particle formation (NPF), nucleation of condensable vapors to the solid or liquid phase, is a significant source of atmospheric aerosol particle number concentrations. With sufficient growth, these nucleated particles may be a significant source of cloud condensation nuclei (CCN), thus altering cloud albedo, structure, and lifetimes, and insolation reaching the Earth's surface. Herein we present one of the first numerical experiments to quantify the impact of NPF on cloud radiative properties that is conducted at a convection permitting resolution and that explicitly simulates cloud droplet number concentrations. Consistent with observations, these simulations suggest that in spring over the Midwestern U.S.A., NPF occurs frequently and on regional scales. However, the simulations suggest that NPF is not associated with enhancement of regional cloud albedos as would be expected from an increase of CCN. These simulations indicate that NPF reduces ambient sulfuric acid concentrations sufficiently to inhibit growth of preexisting particles to CCN sizes. This reduction in CCN-sized particles reduces cloud albedo, resulting in a domain average positive top of atmosphere cloud radiative forcing of 10 W m-2 and up to ~ 50 W m-2 in individual grid cells relative to a simulation in which NPF is excluded.

Sullivan, Ryan C. (ORCID:0000000235001842)↗

The role of proton coupled electron transfer in water oxidation

Water oxidation is a key half reaction in energy conversion schemes based on solar fuels and targets such as light driven water splitting or carbon dioxide reduction into CO, other oxygenates, or hydrocarbons. Carrying out these reactions at rates that exceed the rate of solar insolation for the extended periods of time required for useful applications presents a major challenge. Water oxidation is the key “other” half reaction in these schemes and it is dominated by PCET given its multi-electron, multi-proton character, 2H2O → O2 + 4e- + 4H+. Identification of PCET was an offshoot of experiments designed to investigate energy conversion by electron transfer quenching of molecular excited states. The concepts “redox potential leveling” and concerted electron–proton transfer came from measurements on stepwise oxidation of cis-RuII(bpy)2(py)(OH2)2+ to RuIV(bpy)2(py)(O)2+. The Ru “blue dimer”, cis,cis-(bpy)2(H2O)RuORu(OH2)(bpy)24+, was the first designed catalyst for water oxidation. It undergoes oxidative activation by PCET to give the transient (bpy)2(O)RuVORuV(O)(bpy)24+, O-atom attack on water to give a peroxidic intermediate, and further oxidation and O2 release. More recently, a class of single site water oxidation catalysts has been identified, e.g., Ru(tpy)(bpm)(OH2)2+ (tpy is 2,2':6',2''-terpyridine; bpm is 2,2'-bipyrimidine). They undergo stepwise PCET oxidation to RuIV=O2+ or RuV(O)3+ followed by O-atom transfer with formation of peroxidic intermediates which undergo further oxidation and O2 release. PCET plays a key role in the three zones of water oxidation reactivity: oxidative activation, O•••O bond formation, oxidation and O2 release from peroxidic intermediates. Similar schemes have been identified for electrocatalytic water oxidation on oxide electrode surfaces based on phosphonated derivatives such as [Ru(Mebimpy)(4,4'-(PO3H2CH2)2bpy)(OH2)]2+. A PCET barrier to RuIII–OH2+ → RuIV=O2+ oxidation arises from the large difference in pKa values between RuIII–OH2+ and RuIV(OH)3+. On oxide surfaces this oxidation occurs by multiple pathways. Kinetic, mechanistic, and DFT results on single site catalysts reveal a new pathway for the O•••O bond forming step (Atom-Proton Transfer, APT), significant rate enhancements by added proton acceptor bases, and accelerated water oxidation in propylene carbonate as solvent with water added as a stoichiometric reagent. Lessons learned about water oxidation and the role of PCET and concerted pathways appear to have direct relevance for water oxidation in Photosystem II (PSII) with PSII a spectacular example of PCET in action. This includes a key role for Multiple Site-Electron Proton Transfer in oxidative activation of the Oxygen Evolving Complex (OEC) in the S0 → S1 transition in the Kok cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced stability of silicon for photoelectrochemical water oxidation through self-healing enabled by an alkaline protective electrolyte

Alkaline electrolytes impede the corrosion of Si photoanodes under positive potentials and/or illumination, due to the formation of a SiO x layer that etches 2–3 orders of magnitude more slowly than Si. Hence during water oxidation under illumination, pinholes in protection layers on Si photoanodes result in the local formation of a protective, stabilizing passive oxide on the Si surface. However, operation under natural diurnal insolation cycles additionally requires protection strategies that minimize the dark corrosive etching rate of Si at pinholes. We show herein that addition of [Fe(CN) 6 ] 3- to 1.0 M KOH(aq) results in a self-healing process that extends the lifetime to >280 h of an np + -Si(100) photoanode patterned with an array of Ni catalyst islands operated under simulated day/night cycles. The self-healing [Fe(CN) 6 ] 3- additive caused the exposed Si(100) surface to etch >180 times slower than the Si etch rate in 1.0 M KOH(aq) alone. No appreciable difference in etch rate or facet preference was observed between Si(100) and Si(111) surfaces in 1.0 M KOH(aq) with [Fe(CN) 6 ] 3- , indicating that the surface conformally oxidized before Si dissolved. The presence of [Fe(CN) 6 ] 3- minimally impacted the faradaic efficiency or overpotential of p + -Si/Ni electrodes for the oxygen-evolution reaction.

25 ENERGY STORAGE↗

Polarization-type potential-induced degradation in bifacial PERC modules in the field

This study examines the susceptibility of bifacial glass/glass passivated emitter and rear cell (PERC) modules to potential-induced degradation-polarization (PID-p) in the field. While there are several studies showing PID-p occurring on both front and back faces of bifacial PERC in accelerated tests, we address the yet unclarified behavior in fielded modules. We examine the effects of mounting configuration; specifically, comparing modules mounted near ground and in elevated ground rack configurations. Modules with the cell circuit in -1500 V system voltage configuration, whether mounted on racks about 30 cm above the ground or elevated 2 m high showed mean degradation of 4.5% to 6% in power under standard test conditions over about 2.5 weeks as measured from the front side of the module. This extent of degradation remained sustained for a duration of about 6 months analyzed. Average daytime temperatures of modules in the various mounting configurations were similar and therefore judged to be insufficient to be a primary influence for the modest PID-p rate differences that we observed among mounting configurations. Increased leakage current in the morning suggests morning dew was sustained longer on modules near the ground measured over six months which would be expected to increase the PID-p rate over the long term. However, the main difference seen between the modules on the various mountings during the initial period with up to 6% mean degradation by PID-p was the approximately two times the irradiance from albedo on the rear of modules mounted in elevated ground rack compared to those on the near ground rack. This difference in incident albedo led to a modestly reduced rate of the development of PID-p of the modules on the elevated ground rack. The difference is attributed to the dissipation of PID-p-causing electrical charge by the albedo incident on the module rear. The behavior could be modeled by a sigmoidal equation with consideration of the differences in the insolation on the module rear.

14 SOLAR ENERGY↗

Stratospheric aerosol geoengineering

The Geoengineering Model Intercomparison Project, conducting climate model experiments with standard stratospheric aerosol injection scenarios, has found that insolation reduction could keep the global average temperature constant, but global average precipitation would reduce, particularly in summer monsoon regions around the world. Temperature changes would also not be uniform; the tropics would cool, but high latitudes would warm, with continuing, but reduced sea ice and ice sheet melting. Temperature extremes would still increase, but not as much as without geoengineering. If geoengineering were halted all at once, there would be rapid temperature and precipitation increases at 5–10 times the rates from gradual global warming. The prospect of geoengineering working may reduce the current drive toward reducing greenhouse gas emissions, and there are concerns about commercial or military control. Because geoengineering cannot safely address climate change, global efforts to reduce greenhouse gas emissions and to adapt are crucial to address anthropogenic global warming.

54 ENVIRONMENTAL SCIENCES↗

Maximum power point tracking for a multi-layered piezoelectric heel charger with a levered mechanism toward impact-based energy harvesting

The piezoelectric footstep energy harvester does not always work at its maximum power point when the external load is fixed, as the optimal load changes when the walking excitation alters. Thus, the harvesting efficiency is downgraded largely in real-life scenarios compared to in-lab experiments and theoretical or numerical predictions due to the mismatch between the actual load and the optimal load. To address this issue, the concept of Maximum Power Point Tracking (MPPT) is investigated in this paper and the circuit design is implemented for a multi-layered levered piezoelectric footstep energy harvester (heel charger). The proposed event-driven MPPT circuit interface with a customized buck converter aims to maximize the power gained from daily walking using the heel charger to power a fixed load, such as smart insole or shoes. The MPPT circuit design is conceptually simulated and then tested with the heel charger to further validate if it works at its maximum power point when the frequency of the input excitation alters. Results show that the extracted power from the heel charger connected to a fixed resistance load with MPPT implementation is improved up to 300% compared to the one without MPPT implementation in simulation and up to 180% in the experiment when connected to a fixed load. The difference between simulation and experimental results is due to the optimization of using voltage sources as the heel charger and the control signals (pulse width modulation) from the microcontroller in the simulation.

47 OTHER INSTRUMENTATION↗

TIDAL LIMITS TO PLANETARY HABITABILITY

The habitable zones (HZs) of main-sequence stars have traditionally been defined as the range of orbits that intercept the appropriate amount of stellar flux to permit surface water on a planet. Terrestrial exoplanets discovered to orbit M stars in these zones, which are close-in due to decreased stellar luminosity, may also undergo significant tidal heating. Tidal heating may span a wide range for terrestrial exoplanets and may significantly affect conditions near the surface. For example, if heating rates on an exoplanet are near or greater than that on Io (where tides drive volcanism that resurfaces the planet at least every 1 Myr) and produce similar surface conditions, then the development of life seems unlikely. On the other hand, if the tidal heating rate is less than the minimum to initiate plate tectonics, then CO{sub 2} may not be recycled through subduction, leading to a runaway greenhouse that sterilizes the planet. These two cases represent potential boundaries to habitability and are presented along with the range of the traditional HZ for main-sequence, low-mass stars. We propose a revised HZ that incorporates both stellar insolation and tidal heating. We apply these criteria to GJ 581 d and find that it is in the traditional HZ, but its tidal heating alone may be insufficient for plate tectonics.

99 GENERAL AND MISCELLANEOUS↗

ATMOSPHERIC SULFUR PHOTOCHEMISTRY ON HOT JUPITERS

We develop a new one-dimensional photochemical kinetics code to address stratospheric chemistry and stratospheric heating in hot Jupiters. Here we address optically active S-containing species and CO{sub 2} at 1200 {<=} T {<=} 2000 K. HS (mercapto) and S{sub 2} are highly reactive species that are generated photochemically and thermochemically from H{sub 2}S with peak abundances between 1 and 10 mbar. S{sub 2} absorbs UV between 240 and 340 nm and is optically thick for metallicities [S/H]>0 at T {>=} 1200 K. HS is probably more important than S{sub 2}, as it is generally more abundant than S{sub 2} under hot Jupiter conditions and it absorbs at somewhat redder wavelengths. We use molecular theory to compute an HS absorption spectrum from sparse available data and find that HS should absorb strongly between 300 and 460 nm, with absorption at the longer wavelengths being temperature sensitive. When the two absorbers are combined, radiative heating (per kg of gas) peaks at 100 {mu}bars, with a total stratospheric heating of {approx}8 x 10{sup 4} W m{sup -2} for a jovian planet orbiting a solar-twin at 0.032 AU. Total heating is insensitive to metallicity. The CO{sub 2} mixing ratio is a well behaved quadratic function of metallicity, ranging from 1.6 x 10{sup -8} to 1.6 x 10{sup -4} for -0.3 < [M/H] < 1.7. CO{sub 2} is insensitive to insolation, vertical mixing, temperature (1200 < T < 2000), and gravity. The photochemical calculations confirm that CO{sub 2} should prove a useful probe of planetary metallicity.

99 GENERAL AND MISCELLANEOUS↗

DETECTING TRANSITS OF PLANETARY COMPANIONS TO GIANT STARS

Of the approximately 350 extrasolar planets currently known, of order 10% orbit evolved stars with radii R{sub *} {approx}> 2.5 R{sub sun}. These planets are of particular interest because they tend to orbit more massive hosts, and have been subjected to variable stellar insolation over their recent histories as their primaries evolved off the main sequence. Unfortunately, we have limited information about the physical properties of these planets, as they were all detected by the radial velocity method and none have been observed to transit. Here, we evaluate the prospects for detecting transits of planetary companions to giant stars. We show that several of the known systems have a priori transit probabilities of {approx}>10%, and about one transiting system is expected for the sample of host stars with R{sub *} {>=} 2.5 R{sub sun}. Although the transits are expected to have very small amplitudes ({approx}few x 10{sup -4}) and long durations ({approx}>50 hr), we argue that the difficulty with detecting these signals in broadband light is one of systematic errors and practicality rather than photon noise, even for modest aperture ({approx}1 m) telescopes. We propose a novel method that may overcome these difficulties, which uses narrowband measurements to isolate the thin ring of chromospheric emission expected at the limb of giant stars. The transit signals in these narrow bands are expected to be larger in magnitude and briefer in duration than in broadband emission, and thus alleviating many of the difficulties with transit detection in broadband emission. Finally, we point out that it may be possible to discover planetary companions to giant stars using Kepler, provided that a sufficient number of such targets are monitored.

79 ASTRONOMY AND ASTROPHYSICS↗

TIDALLY HEATED TERRESTRIAL EXOPLANETS: VISCOELASTIC RESPONSE MODELS

Tidal friction in exoplanet systems, driven by orbits that allow for durable nonzero eccentricities at short heliocentric periods, can generate internal heating far in excess of the conditions observed in our own solar system. Secular perturbations or a notional 2:1 resonance between a hot Earth and hot Jupiter can be used as a baseline to consider the thermal evolution of convecting bodies subject to strong viscoelastic tidal heating. We compare results first from simple models using a fixed Quality factor and Love number, and then for three different viscoelastic rheologies: the Maxwell body, the Standard Anelastic Solid (SAS), and the Burgers body. The SAS and Burgers models are shown to alter the potential for extreme tidal heating by introducing the possibility of new equilibria and multiple response peaks. We find that tidal heating tends to exceed radionuclide heating at periods below 10-30 days, and exceed insolation only below 1-2 days. Extreme cases produce enough tidal heat to initiate global-scale partial melting, and an analysis of tidal limiting mechanisms such as advective cooling for earthlike planets is discussed. To explore long-term behaviors, we map equilibria points between convective heat loss and tidal heat input as functions of eccentricity. For the periods and magnitudes discussed, we show that tidal heating, if significant, is generally detrimental to the width of habitable zones.

79 ASTRONOMY AND ASTROPHYSICS↗

EXOPLANET ALBEDO SPECTRA AND COLORS AS A FUNCTION OF PLANET PHASE, SEPARATION, AND METALLICITY

First generation space-based optical coronagraphic telescopes will obtain images of cool gas- and ice-giant exoplanets around nearby stars. Exoplanets lying at planet-star separations larger than about 1 AU-where an exoplanet can be resolved from its parent star-have spectra that are dominated by reflected light to beyond 1 {mu}m and punctuated by molecular absorption features. Here, we consider how exoplanet albedo spectra and colors vary as a function of planet-star separation, metallicity, mass, and observed phase for Jupiter and Neptune analogs from 0.35 to 1 {mu}m. We model Jupiter analogs with 1x and 3x the solar abundance of heavy elements, and Neptune analogs with 10x and 30x the solar abundance of heavy elements. Our model planets orbit a solar analog parent star at separations of 0.8 AU, 2 AU, 5 AU, and 10 AU. We use a radiative-convective model to compute temperature-pressure profiles. The giant exoplanets are found to be cloud-free at 0.8 AU, possess H{sub 2}O clouds at 2 AU, and have both NH{sub 3} and H{sub 2}O clouds at 5 AU and 10 AU. For each model planet we compute moderate resolution (R = {lambda}/{Delta}{lambda} {approx} 800) albedo spectra as a function of phase. We also consider low-resolution spectra and colors that are more consistent with the capabilities of early direct imaging capabilities. As expected, the presence and vertical structure of clouds strongly influence the albedo spectra since cloud particles not only affect optical depth but also have highly directional scattering properties. Observations at different phases also probe different volumes of atmosphere as the source-observer geometry changes. Because the images of the planets themselves will be unresolved, their phase will not necessarily be immediately obvious, and multiple observations will be needed to discriminate between the effects of planet-star separation, metallicity, and phase on the observed albedo spectra. We consider the range of these combined effects on spectra and colors. For example, we find that the spectral influence of clouds depends more on planet-star separation and hence atmospheric temperature than metallicity, and it is easier to discriminate between cloudy 1x and 3x Jupiters than between 10x and 30x Neptunes. In addition to alkalis and methane, our Jupiter models show H{sub 2}O absorption features near 0.94 {mu}m. While solar system giant planets are well separated by their broadband colors, we find that arbitrary giant exoplanets can have a large range of possible colors and that color alone cannot be relied upon to characterize planet types. We also predict that giant exoplanets receiving greater insolation than Jupiter will exhibit higher equator-to-pole temperature gradients than are found on Jupiter and thus may exhibit differing atmospheric dynamics. These results are useful for future interpretation of direct imaging exoplanet observations as well as for deriving requirements and designing filters for optical direct imaging instrumentation.

79 ASTRONOMY AND ASTROPHYSICS↗

OHMIC DISSIPATION IN THE ATMOSPHERES OF HOT JUPITERS

Hot Jupiter atmospheres exhibit fast, weakly ionized winds. The interaction of these winds with the planetary magnetic field generates drag on the winds and leads to ohmic dissipation of the induced electric currents. We study the magnitude of ohmic dissipation in representative, three-dimensional atmospheric circulation models of the hot Jupiter HD 209458b. We find that ohmic dissipation can reach or exceed 1% of the stellar insolation power in the deepest atmospheric layers, in models with and without dragged winds. Such power, dissipated in the deep atmosphere, appears sufficient to slow down planetary contraction and explain the typically inflated radii of hot Jupiters. This atmospheric scenario does not require a top insulating layer or radial currents that penetrate deep in the planetary interior. Circulation in the deepest atmospheric layers may actually be driven by spatially non-uniform ohmic dissipation. A consistent treatment of magnetic drag and ohmic dissipation is required to further elucidate the consequences of magnetic effects for the atmospheres and the contracting interiors of hot Jupiters.

79 ASTRONOMY AND ASTROPHYSICS↗

THE EFFECTS OF IRRADIATION ON HOT JOVIAN ATMOSPHERES: HEAT REDISTRIBUTION AND ENERGY DISSIPATION

Hot Jupiters, due to the proximity to their parent stars, are subjected to a strong irradiating flux that governs their radiative and dynamical properties. We compute a suite of three-dimensional circulation models with dual-band radiative transfer, exploring a relevant range of irradiation temperatures, both with and without temperature inversions. We find that, for irradiation temperatures T{sub irr} {approx}< 2000 K, heat redistribution is very efficient, producing comparable dayside and nightside fluxes. For T{sub irr} Almost-Equal-To 2200-2400 K, the redistribution starts to break down, resulting in a high day-night flux contrast. Our simulations indicate that the efficiency of redistribution is primarily governed by the ratio of advective to radiative timescales. Models with temperature inversions display a higher day-night contrast due to the deposition of starlight at higher altitudes, but we find this opacity-driven effect to be secondary compared to the effects of irradiation. The hotspot offset from the substellar point is large when insolation is weak and redistribution is efficient, and decreases as redistribution breaks down. The atmospheric flow can be potentially subjected to the Kelvin-Helmholtz instability (as indicated by the Richardson number) only in the uppermost layers, with a depth that penetrates down to pressures of a few millibars at most. Shocks penetrate deeper, down to several bars in the hottest model. Ohmic dissipation generally occurs down to deeper levels than shock dissipation (to tens of bars), but the penetration depth varies with the atmospheric opacity. The total dissipated Ohmic power increases steeply with the strength of the irradiating flux and the dissipation depth recedes into the atmosphere, favoring radius inflation in the most irradiated objects. A survey of the existing data, as well as the inferences made from them, reveals that our results are broadly consistent with the observational trends.

79 ASTRONOMY AND ASTROPHYSICS↗

KELT-1b: A STRONGLY IRRADIATED, HIGHLY INFLATED, SHORT PERIOD, 27 JUPITER-MASS COMPANION TRANSITING A MID-F STAR

We present the discovery of KELT-1b, the first transiting low-mass companion from the wide-field Kilodegree Extremely Little Telescope-North (KELT-North) transit survey. A joint analysis of the spectroscopic, radial velocity, and photometric data indicates that the V = 10.7 primary is a mildly evolved mid-F star with T{sub eff} = 6516 {+-} 49 K, log g 4.228{sup +0.014}{sub -0.021}, and [Fe/H] = 0.052 {+-} 0.079, with an inferred mass M{sub *} = 1.335 {+-} 0.063 M{sub Sun} and radius R{sub *} 1.471{sup +0.045}{sub -0.035} R{sub Sun }. The companion is a low-mass brown dwarf or a super-massive planet with mass M{sub P} = 27.38 {+-} 0.93 M{sub Jup} and radius R{sub P} = 1.116{sup +0.038}{sub -0.029} R{sub Jup}. The companion is on a very short ({approx}29 hr) period circular orbit, with an ephemeris T{sub c} (BJD{sub TDB}) = 2455909.29280 {+-} 0.00023 and P = 1.217501 {+-} 0.000018 days. KELT-1b receives a large amount of stellar insolation, resulting in an estimated equilibrium temperature assuming zero albedo and perfect redistribution of T{sub eq} = 2423{sup +34}{sub -27} K. Comparison with standard evolutionary models suggests that the radius of KELT-1b is likely to be significantly inflated. Adaptive optics imaging reveals a candidate stellar companion to KELT-1 with a separation of 588 {+-} 1 mas, which is consistent with an M dwarf if it is at the same distance as the primary. Rossiter-McLaughlin measurements during transit imply a projected spin-orbit alignment angle {lambda} = 2 {+-} 16 deg, consistent with a zero obliquity for KELT-1. Finally, the vsin I{sub *} = 56 {+-} 2 km s{sup -1} of the primary is consistent at {approx}2{sigma} with tidal synchronization. Given the extreme parameters of the KELT-1 system, we expect it to provide an important testbed for theories of the emplacement and evolution of short-period companions, as well as theories of tidal dissipation and irradiated brown dwarf atmospheres.

79 ASTRONOMY AND ASTROPHYSICS↗