Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydroxyls”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Rate constant for the reaction between OH and CS2 at 298 and 520 K

In an attempt to resolve discrepancies between published values of the rate constant for the reaction between the hydroxyl radical and carbon disulfide, the reaction has been studied in a discharge flow system by using resonance fluorescence for kinetic measurements and mass spectrometry for product analysis. On the basis of the measured rate constant for disappearance of OH, and measurements of the amount of carbonyl sulfide formed, it was estimated that for the reaction HO + CS2 yields HS + OCS, rate constant values are not greater than 3 x 10 to the -15th/cu cm per sec at 520 K and not greater than 7 x 10 to the -15th/cu cm per sec at 298 K, upper limits are specified because of the inability to isolate exclusively this reaction channel, and because of possible involvement of wall reactions. These results confirm the low values found for this rate constant in two very recent studies.

Leu, M.-T.↗
NASA NTRS1983

Antenna technology for orbital Very Long Baseline Interferometry (VLBI)

Since it is not economically feasible to construct steerable antennas much larger than 100 meters on Earth (400 meters for fixed telescopes), radio interferometry became a very useful technique for high resolution astronomy observations of quasars, galactic nuclei, and interstellar hydroxyl (OH) and water vapor (H2O) masers. The subsystems necessary to do the space VLBI experiment appear are available but require space qualifications. There are several 50-meter antenna concepts that could be used. Certainly there are problems to be solved. Feed positioning with respect to reflector, pointing such a large structure to accuracy indicated, and integration into the Shuttle control system are all significant engineering challenges. However, there are no problems that are insurmountable in the latter part of this decade.

Hamilton, E. C.↗
NASA NTRS1983

Advanced inorganic separators for alkaline batteries and method of making the same

A flexible, porous battery separator includes a coating applied to a porous, flexible substrate. The coating comprises: (1) a thermoplastic rubber-based resin which is insoluble and unreactive in the alkaline electrolyte, (2) a polar organic plasticizer which is reactive with the alkaline electrolyte to produce a reaction product which contains a hydroxyl group and/or a carboxylic acid group, and (3) a mixture of polar particulate filler materials which are unreactive with the electrode. The mixture comprises at least one first filler material having a surface area of greater than 25 sq meters/gram, at last one second filler material having a surface area of 10 to 25 sq meters/gram. The volume of the mixture of filler materials is less than 45% of the total volume of the fillers and the binder. The filler surface area per gram of binder is about 20 to 60 sq meters/gram, and the amount of plasticizer is sufficient to coat each filler particle.

Sheibley, D. W.↗
NASA NTRS1981

Remote mineralogical analysis using a high-resolution airborne spectroradiometer - Preliminary results of the Mark II system

The 1500-2500-nm region is of particular interest for remote mineralogical analysis since hydroxyl-bearing minerals, such as clays, alunite, muscovite, and pyrophyllite, which are associated with hydrothermally altered rocks, have diagnostic absorption features in this region. The development and successful flight testing of the Mark II instrument are seen as making possible the acquisition of the necessary high-spectral-resolution data for evaluating this approach to the remote sensing of geological features. Preliminary results of an analysis of data gathered in October 1980 using the Mark II system for selected test sites in Nevada are presented. Even though field and laboratory analyses of the data are only in the initial stages, the results are seen as indicating that this system can be used to detect the most diagnostic spectral features of several economically important minerals.

Collins, W.↗
NASA NTRS1982

Molecular structure of r/GCG/d/TATACGC/ - A DNA-RNA hybrid helix joined to double helical DNA

The molecule r(GCG)d(TATACGC) is self-complementary and forms two DNA-RNA hybrid segments surrounding a central region of double helical DNA; its molecular structure has been solved by X-ray analysis. All three parts of the molecule adopt a conformation which is close to that seen in the 11-fold RNA double helix. The conformation of the ribonucleotides is partly determined by water molecules bridging between the ribose O2' hydroxyl group and cytosine O2. The hybrid-DNA duplex junction contains no structural discontinuities. However, the central DNA TATA sequence has some structural irregularities.

Wang, A. H.-J.↗
NASA NTRS1982

Is cell aging caused by respiration-dependent injury to the mitochondrial genome

Though intrinsic mitochondrial aging has been considered before as a possible cause of cellular senescence, the mechanisms of such mitochondrial aging have remained obscure. In this article, the hypothesis of free-radical-induced inhibition of mitochondrial replenishment in fixed postmitotic cells is expanded. It is maintained that the respiration-dependent production of superoxide and hydroxyl radicals may not be fully counteracted, leading to a continuous production of lipoperoxides and malonaldehyde in actively respiring mitochondria. These compounds, in turn, can easily react with the mitochondrial DNA which is in close spatial relationship with the inner mitochondrial membrane, producing an injury that the mitochondria may be unable to counteract because of their apparent lack of adequate repair mechanisms. Mitochondrial division may thus be inhibited leading to age-related reduction of mitochondrial numbers, a deficit in energy production with a concomitant decrease in protein synthesis, deterioration of physiological performance, and, therefore, of organismic performance.

Fleming, J. E.↗
NASA NTRS1982

Mars: Definition and characterization of global surface units with emphasis on composition

Viking 2 approach maps of red and violet normal albedo are used to define units of similar optical properties for a large area of the Martian surface. Computer processing of these data reveals clusters of albedo values relating to specific, contiguous regions of the planet, with some unit boundaries being of a gradational nature while others are more discrete. A study of the albedo properties of analog materials measured in the laboratory, and of telescopic spectrophotometry of Mars, indicates that both hydroxylated and hematitic oxidized materials exist on the surface. The most probable surface expression of global dust and/or high albedo soils is in the classical bright region, Arabia. Most low albedo features in the region studied have red and violet albedos that are consistent with a dark substrate, such as basalt, coated by, or mixed with, a fine grained alteration product.

Mccord, T. B.↗
NASA NTRS1983

Prebiotic synthesis and reactions of nucleosides and nucleotides

The potential of diiminosuccinonitrile (DISN) as a prebiotic phosphorylating agent is studied. This compound is formed readily by the oxidation of diaminomaleonitrile, a tetramer of HCN. DISN is shown to produce the cyclization of 3'-adenosine monophosphate to adenosine 2',3'-cyclic phosphate in up to 40 percent yield. The DISN-mediated phosphorylation of uridine to uridine monophosphate is determined not to proceed efficiently in aqueous solution. The reaction of DISN and BrCN with uridine-5'-phosphate and uridine is found to result in the formation of 2,2'-anhydronucleotides and 2,2'-anhydronucleosides, respectively, and other reaction products resulting from an initial reaction at the 2' and 3'-hydroxyl groups. Homoionic montmorillonites were employed to study the clay mineral catalysis of the cyclization of adenosine-3'-phosphate.

Ferris, J. P.↗
NASA NTRS1982

Anomalous phase separation behavior of gel-derived soda-silica glasses

The effects of retained bound hydroxyl groups on amorphous immiscibility behavior and on the kinetics of phase separation were studied in glasses containing from 10 to 19 percent sodium oxide preparaed by the gel process. Differences in behavior as functions of preliminary thermal treatment of the gel precursor and of melting conditions were studied, employing IR spectroscopy, SAXS and WAXD to monitor the variation in glass microstructure. Both the initial gel treatment and the OH concentration in the prepared glasses were found to affect the immiscibility temperatures, and the magnitude of the maximum temperature increase was also a function of the sodium oxide concentration. It is suggested that the variation in thermodynamic behavior may be caused by the structural arrangement attained by the OH groups during the gel condensation process, which in turn affects the extent of hydrogen bonding to nonbridging oxygen ions.

Neilson, G. F.↗
NASA NTRS1983

Interaction of hydrogen chloride and water with oxide surfaces. III - Titanium dioxide

The adsorption of hydrogen chloride and water vapors on five TiO2 powders in both the anatase and rutile crystalline forms was studied as a function of temperature, pressure, and outgas conditions. The adsorbents were characterized utilizing X-ray powder diffraction, scanning electron microscopy, surface area analysis, indicator method, microelectrophoresis, XPS, and infrared spectroscopy. It was found that both outgas temperature and adsorption temperature influenced the adsorption of water vapor on TiO2, while water vapor adsorption on TiO2 was completely reversible. It is argued that the number of hydroxyl groups present on the surface determines the adsorption capacity of water on the different titanium dioxides. It was found that heats of immersion in water were affected significantly by outgas temperature. Hydrogen chloride adsorption isotherms at 30 C measured on TiO2 after outgassing at 100-400 C showed that a part of the total HCl adsorbed was irreversibly adsorbed. The highest HCl adsorption capacity per unit area was exhibited by anatase, while pure rutile exhibited the lowest adsorption capacity.

Siriwardane, R. V.↗
NASA NTRS1983

Remote sensing of OH in the atmosphere using the technique of laser-induced fluorescence

The use of a laser-induced fluorescence technique for the sensitive measurement of the atmospheric hydroxyl radical is discussed. Results of laboratory studies of the fluorescence and other spectroscopic properties of OH which allow the calculation of OH concentrations from the returned signals for various altitudes, water vapor contents and temperatures are presented. The experimental setup used for airborne OH measurements is then described, with particular attention given to the use of a telescope for excitation and light collection in a coaxial configuration and the periodic tuning of the exciting radiation necessary to obtain an OH signal in the presence of strong solar and nonresonant fluorescence backgrounds. The best detection limit obtained to date with the system is noted to be about 700,000 OH/cu cm, and it is expected that, with planned improvements in detection and tuning schemes, limits in the neighborhood of 1,000,000 OH/cu cm will be achieved routinely.

Wang, C. C.↗
NASA NTRS1982

Flexible composite film for printed circuit board

A flexible printed circuit for a printed circuit board in which layers of reaction product composed of a combination of phenoxy resin - polyisocyanate - brominated epoxy resin, and in which the equivalent ratio of those functional groups is hydroxyl group: isocyanate group: epoxy group - 1 : 0.2 to 2 : 0.5 to 3 are laminated on at least one side of saturated polyester film is discussed.

Yabe, K.↗
NASA NTRS1981

Synthesis of perfluoroalkylene dianilines

The objective of this contrast was to optimize and scale-up the synthesis of 2,2-bis(4-aminophenyl)-hexafluoropropane and 1,3-bis(4-aminophenyl)hexafluoropropane, as well as to explore avenues to other perfluoroalkyl-bridged dianilines. Routes other than Friedel-Crafts reaction leading to 2,2-bis(4-aminophenyl)hexafluoropropane were investigated. The processes utilizing bisphenol-AF were all unsuccessful; reactions aimed at the production of 4-(hexafluoro-2-halo-isopropyl)aniline from the hydroxyl intermediate failed to yield the desired products. Tailoring the conditions of the Friedel-Crafts reaction of 4-(hexafluoro-2-hydroxyisopropyl)aniline, aniline, and aluminum chloride by using hydrochloride salts and selecting optimum reagent ratios, reaction times, and temperature resulted in approx. 20% yield of pure crystallized 2,2-bis(4-aminophenyl)hexafluoropropane in 0.2 mole reaction batches. Yields up to approx. 40% were realized in small, approx. 0.01 mole, batches. The synthesis of 1,3-bis(4-aminophenyl)hexafluoropropane starting with perfluoroglutarimidine was reinvestigated. The yield of the 4-step reaction sequence giving 1,3-bis(4-acetamidophenyl)hexafluoropropane was raised to 44%. The yield of the subsequent hydrolysis process was improved by a factor of approx. 2. Approaches to prepare other perfluoroalkyl-bridged dianilines were unsuccessful. Reactions reported to proceed readily with trifluoromethyl substituents failed when longer chain perfluoroalkyl groups were employed.

Paciorek, K. L.↗
NASA NTRS1984

Phenoxy resins containing pendent ethynyl groups

As part of an effort on tougher/solvent resistant matrix resins for composites, research was directed towards exploring methods to improve the solvent resistance of linear amorphous thermoplastics. Ethyl reactive groups were placed on the ends of oligomers and pendent along the polymer chain and subsequently thermally reacted to provide crosslinking and thus improvement in solvent resistance. This concept is extended to another thermoplastic, a phenoxy resin. A commercially available phenoxy resin (PKHH) was systematically modified by reaction of the pendent hydroxyl groups on the phenoxy resin with various amounts of 4-ethynylbenzoyl chloride. As the pendent ethynyl group content in the phenoxy resin increased, the cured resin exhibited a higher glass transition temperature, better solvent resistance and less flexibility. The solvent resistance was further improved by correcting a low molecular weight diethynyl compound, 2,2-bis(4-ethynylbenzoyloxy-4'-phenyl)propane, with a phenoxy resin containing pendent ethynyl groups.

Hergenrother, P. M.↗
NASA NTRS1982

Flexible substrate for printed wiring

A very flexible substrate for printed wiring is disclosed which is composed of a blend of phenoxy resin-polyisocyanate-brominated epoxy resin in which the equivalent ration of the functional groups is hydroxyl grouped: isocyanate group: epoxy group = 1:0.2 to 2:0.5 to 3. The product has outstanding solder resistance and is applied to metal without using adhesives.

Asakura, M.↗
NASA NTRS1984

Saturated laser fluorescence in turbulent sooting flames at high pressure

The primary objective was to develop a quantitative, single pulse, laser-saturated fluorescence (LSF) technique for measurement of radical species concentrations in practical flames. The species of immediate interest was the hydroxyl radical. Measurements were made in both turbulent premixed diffusion flames at pressures between 1 and 20 atm. Interferences from Mie scattering were assessed by doping with particles or by controlling soot loading through variation of equivalence ratio and fuel type. The efficacy of the LSF method at high pressure was addressed by comparing fluorescence and adsorption measurements in a premixed, laminar flat flame at 1-20 atm. Signal-averaging over many laser shots is sufficient to determine the local concentration of radical species in laminar flames. However, for turbulent flames, single pulse measurements are more appropriate since a statistically significant number of laser pulses is needed to determine the probability function (PDF). PDFs can be analyzed to give true average properties and true local kinetics in turbulent, chemically reactive flows.

King, G. B.↗