Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydrate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Formation of Tropopause Cirrus clouds by Typhoon-induced gravity waves during the Asian Summer Monsoon: A Case Study from the BATAL 2017 Campaign

Cirrus clouds in the Tropical Tropopause Layer (TTL) have a net warming impact on Earth’s climate and they regulate the amount of water vapor entering the lower stratosphere through dehydration process near the cold-point tropopause. During the Boreal summer, Asian Summer Monsoon (ASM) is an important source of cirrus clouds and humidity in the TTL owing to frequent deep convection. However, better representation of convection and TTL cirrus clouds in global climate models is needed for accurate assessment of their response to changing climate. In this study, we investigate the mechanisms involved in the formation of a tropopause cirrus cloud layer observed during the Balloon measurement campaigns of the Asian Tropopause Aerosol Layer (BATAL) over Hyderabad (17.47 °N, 78.58 °E), India on 23 August 2017. A subvisible cirrus cloud layer (optical thickness ~0.025) was detected by a backscatter sonde (COBALD) onboard a balloon near the cold-point tropopause (CPT, temperature~ -86.4 ° C, altitude~17.9 km) which was later confirmed by the CATS lidar on the ISS. Simultaneous measurements from an optical particle counter (Boulder Counter) revealed the presence of ice crystals smaller than 50 microns in this layer. The formation mechanism responsible for this tropopause cirrus is investigated using a technique combining three-dimensional back-trajectories, satellite observations, and ERA5 reanalysis data. Satellite observations revealed that the overshooting convection associated with a category-3 typhoon Hato, which hit Macau and Hong Kong on 23 August 2017 injected ice into the lower stratosphere. This caused a hydration patch that followed the ASM anticyclone subsequently moving towards Hyderabad. The presence of tropopause cirrus cloud layers in the cold temperature anomalies and updrafts along the back-trajectories indicated towards the role of typhoon-induced gravity waves in their formation. This case study highlights the role of typhoons in influencing the formation of tropopause cirrus clouds through stratospheric hydration and gravity waves in the ASM anticyclone.

Amit Kumar Pandit↗
NASA NTRSDate not supplied

Asteroid (142) Polana at 3 µM and Its Linkage to the Primitive Asteroid (101955) Bennu

The Polana family is a low-albedo family located at a low inclination and a semimajor axis of ~2.42 au in the inner main asteroid belt. This family is likely the source of primitive near-Earth asteroids, including the OSIRIS-REx mission target (101955) Bennu. The B-type asteroid 142 Polana is the largest remnant of the "New Polana" family, and it has been spectrally (~0.5-2.5 µm) and dynamically linked to Bennu. Here, we investigate the compositional linkage of asteroids Polana and Bennu using spectra measured at longer wavelengths (~1.6-4.0 µm), which cover the 3- µm band. Polana’s spectra were measured at NASA IRTF using the LXD mode of SpeX. Bennu’s spectra were measured by OSIRIS-REx’s OVIRS spectrometer and revealed that this primitive asteroid is hydrated consistent with CM, CI, or CR carbonaceous chondrites. Polana’s LXD spectra, on the hand, show that the parent body of the Polana family is not hydrated (i.e., no absorption band at ~ 3.0 µm). Additionally, Polana’s LXD spectra do not indicate the presence of organics and/or carbonates. Polana's lack of significant water, organic, and carbonate spectral features on its surface could be related to the degree of heating in the Polana family-forming event and the reaccretion of ejecta that contributed to additional heating. The Polana family-forming event could also expose the parent body's dehydrated, organic/carbonate-poor interior. These results will be placed in the context of other low-albedo families and background objects in the inner main belt. An approved JWST program to observe Polana (with both NIRSpec and MIRI) will be able to assess if there is a Ryugu-like band and should allow a comparison of the MIR spectrum to Bennu.

Driss Takir↗
NASA NTRS2024

Coordinated Analysis of Phosphates in Samples From Asteroid (101955) Bennu

Asteroid (101955) Bennu is a B-type asteroid and a prime candidate for investigating the remnants of planet formation and enhancing our understanding of potential sources of crucial bio-essential elements for the early Earth. Remote observations of the surface of Bennu unveiled a terrain of boulders primarily composed of hydrated phyllosilicates, organic molecules, and carbonates. The hydrated nature of Bennu, the abundance of carbonates, and the presence of cm-scale carbonate veins provide clues to the nature of the building blocks of Bennu’s parent body and to its complex geological history. Here we present the first mineralogical, chemical, and isotopic results of analysis of phosphates in samples returned from Bennu by NASA’s OSIRIS-REx mission. We seek to test the hypothesis that heating of Bennu’s parent asteroid resulted in hydrothermal alteration in which melted ice reacted with the initial constituents.

J. J. Barnes↗
NASA NTRSDate not supplied

Advances in X-ray Instruments to Support Mars Sample Return

The Mars 2020 Perseverance rover is currently collecting drill cores of ancient igneous and sedimentary rock in and around Jezero crater for potential transport to Earth. These samples from the martian surface will enable detailed mineralogical, geochemical, and petrological measurements to characterize ancient depositional and diagenetic environments, quantitatively age-date the samples, and identify the building blocks for life or evidence for life itself. Furthermore, these drill cores are especially precious because they may represent the most pristine samples from the martian surface and our best chance at identifying martian life, as future sample return missions may be conducted by humans that can introduce biological contaminants to the samples. Because of the importance of these samples, we must take great care in their handling, curation, and preliminary analyses so that they are preserved for scientific measurements for decades to come. In-situ measurements by Perseverance have identified minerals that further warrant special treatment of the returned samples. Hydrated sulfate carbonate, swelling clay minerals, and oxychlorine salts are extremely sensitive to changes in temperature and relative humidity. The structures of hydrated sulfates and oxychlorine minerals, in particular, readily change when exposed to different conditions, meaning the mineral assemblage of the as-returned samples may be lost if the samples aren’t handled properly. Characterizing the as-returned mineral assemblage, particularly of the salts, is essential for reconstructing past aqueous conditions and habitability. To characterize the as-returned mineral assemblage, the samples must be analyzed rapidly before phase changes occur and/or under controlled conditions (e.g., within a glove box). Significant recent advances in X-ray instrumentation for robotic exploration of the solar system have resulted in high-resolution miniaturized instruments that would provide mineralogical, geochemical, and petrological information on the returned martian samples without degradation of the mineral assemblage. Here, we describe a combined X-ray diffractometer/X-ray fluorescence spectrometer (XRD/XRF), an X-ray computed tomographic (XCT) instrument, and a scanned beam XRF mapping instrument that could be used in a glove box so that the martian samples remain under controlled conditions.

E. B. Rampe↗
NASA NTRS2024

Hydrogen Isotopic Composition of Hydrous Minerals in Particles From Bennu

On September 24, 2023, NASA’s OSIRIS-REx mission delivered to Earth ~121 g of pristine carbonaceous regolith from asteroid Bennu. A first series of mineralogical observations and chemical/isotopic analyses of Bennu aggregate samples (fine to coarse particles up to a few mm) revealed that this material resembles the most chemically primitive chondrites and the samples returned by the JAXA’s Hayabusa2 mission from the carbonaceous asteroid Ryugu. Laboratory studies have confirmed the story gleaned from the spacecraft encounter that Bennu’s rock fragments underwent extensive aqueous alteration and are predominantly composed of hydrated minerals (serpentine, smectite) and other secondary minerals (e.g., magnetite, carbonates). The secondary phases were likely formed under the presence of liquid water on Bennu’s parent asteroid. The isotopic compositions of hydrous minerals and secondary phases can increase our understanding of the source and distribution of water and volatile elements in the protoplanetary disk [e.g., 5-8]. However, direct estimates of the hydrogen isotopic ratios (D/H) in hydrous minerals cannot be obtained easily in primitive rocks due to the difficulty in estimating the organic matter (OM) contribution to the whole H budget. In order to obtain hints on the initial constituents of Bennu’s parent asteroid and to test if Bennu's parent asteroid have formed beyond the snow line (hypothesis 4 of [9]), we measured the D/H and C/H ratios in chondritic matrices by secondary ion mass spectrometry (SIMS) and obtain information on the D/H ratio of water retained in the hydrated minerals. The method also gives clues on the hydrogen isotope variability among different Bennu rock fragments made available for measurement.

L Piani↗
NASA NTRSDate not supplied

Cleanroom Microbes Survive Drying, Vacuum, and Proton Irradiation

Introduction : The goal of planetary protection at NASA is to mitigate the risk of contaminating sensitive target bodies with biological life. While many cleaning procedures have been put in place to reduce bioburden on spacecraft, microbes are experts at evolving to survive harsh conditions. Specifically, the dry, low-nutrient environment of a cleanroom (commonly used for assembly of spacecraft) can represent an environment where extremophiles can survive. Methods : Scientists at NASA MSFC wished to gather a snapshot of the microbial population within a variety of cleanrooms on site. A study was undertaken to collect air, surface, and floor samples from clean-rooms and isolate unique morphologies. From this study, 95 isolates were collected and saved in a microbial library. About 86% of these were identified at least to a genus level. Following identification, 24 microbes were selected, based on a literature review, as potential extremophiles. These were grown in liquid cultures, diluted to a set optical density, washed with water, and then applied to a sterilized Kapton coupon. Droplets were allowed to dry overnight in a biosafety cabinet. Coupons were then installed in a pelletron and pumped down to high vacuum (~1E-6 Torr). Samples were then subjected 100 keV protons at a fluence of 2x10 15 p+/cm 2 up to 4x10 15 p+/cm 2 . Following exposure, samples were returned to the microbiology lab where they were pro-cessed by submerging in water, vortexing, and then plating either droplets or spread plates. Recovery data collected was qualitative with a ranking or +, minor, or – for growth. Some selected radiotolerant strains were sequenced using the Illumina sequencing platform. The resulting genomes were annotated with the Rapid Annotations using Subsystems Technology (RAST) server and analyzed for conserved and unique stress response relevant genomic signatures to identify clues related to specific tolerances. Results and Discussion : After five rounds of proton radiation, we narrowed our isolates to five, non-spore forming bacteria that demonstrated survival: Arthrobacter koreensis, Paenarthrobacter nitroguajacolicus, Mycetocola manganoxydans , and an Erwinia sp. Furthermore, we exposed these four microbes to 254 nm wavelength light at an intensity of 80 W/m 2 at a distance of ~18 cm for 10 minutes. Only A. koreensis demonstrated survival following UV exposure. Finally, we performed whole genome sequencing on the four strains to look for genetic markers of stress resistance. When we compared the genomes of the four strains, we found that genes coding for GGDEF and EAL domains with PAS/PAC sensors were only found in A. koreensis . These domains, modulated by PAS/PAC sensors, are hypothesized to facilitate survival under drying, desiccation, and proton irradiation. Drying and Desiccation : PAS domains sense hydration changes and modulate GGDEF and EAL domain activity to adjust c-di-GMP levels, enhancing resistance to desiccation. For instance, in Pseudomonas aeruginosa , the PAS domain of RbdA modulates activity under varying hydration conditions, affecting stress responses [1]. Proton Irradiation : Proton irradiation causes oxidative stress, leading to ROS generation. PAS domains detect this stress and modulate GGDEF and EAL domains to manage oxidative stress responses. In Shewanella , EAL domain proteins modulated by PAS sensors help bacteria adapt to extreme conditions [2]. These genes upregulate other stress response genes, protecting membrane function, protein stability, DNA repair, and antioxidant defenses. The modulation of c-di-GMP by PAS domains is crucial for bacterial adaptation to stress conditions, enabling dynamic physio-logical adjustments [3]. Understanding these mechanisms provides insights into bacterial stress responses and strategies for controlling bacterial growth [4]. Conclusions : These findings indicate that clean-rooms harbor extremophile microbes that may be able to survive conditions in deep space. Furthermore, while we identified certain stress-response genes that may be at least partly responsible for the phenotypes observed in this study, there are likely unidentified genes or characteristics about A. koreensis , and other bacteria, that may allow them to survive in harsh environments. Future studies will focus on identifying these unknown genes and characteristics, further elucidating the mechanisms of extremophile survival and potentially informing the development of new biotechnologies for space exploration and other extreme environments.

Chelsi Cassilly↗
NASA NTRS2024

Preliminary Analyses of Asteroid Bennu Samples Returned by NASA’s OSIRIS-REx Mission

NASA’s OSIRIS-REx mission returned ~122 g of pristine carbonaceous regolith from Bennu on September 24, 2023. The science team is performing analyses of the mineralogy, chemical and isotopic compositions, and physical properties of the samples. The returned samples consist of particles ranging up to 3.5 cm in size with angular and hummocky morphologies predominating. Reflectance spectra over the visible and infrared wavelengths collected during the spacecraft encounter contained features indicating abundant hydrated phyllosilicates, carbonates, magnetite, organic matter, and rare anhydrous silicates. Laboratory analyses confirmed these detections and identified several other major and minor phases including abundant FeNi sulfides, minor hydrated Mg-rich phosphates as encrustations and in veins, and presolar grains. The Bennu samples show evidence for extensive aqueous alteration and resemble the rare and chemically primitive CI carbonaceous chondrites and samples returned from Ryugu by JAXA’s Hayabusa2 mission. Samples of Bennu’s uppermost surface, collected by contact pads, help us to understand how recent impacts and irradiation processes have changed the optical properties of Bennu surface materials measured by remote sensing. The analyses thus far highlight the value of sample return by illustrating the pristine nature of the samples compared to meteorites that have been compromised and altered by exposure to the terrestrial environment.

Lindsay P Keller↗
NASA NTRS1952

Ignition Delay Experiments with Small-scale Rocket Engine at Simulated Altitude Conditions Using Various Fuels with Nitric Acid Oxidants / Dezso J. Ladanyi

Ignition delay determinations of several fuels with nitric oxidants were made at simulated altitude conditions utilizing a small-scale rocket engine of approximately 50 pounds thrust. Included in the fuels were aniline, hydrazine hydrate, furfuryl alcohol, furfuryl mercaptan, turpentine, and mixtures of triethylamine with mixed xylidines and diallyaniline. Red fuming, white fuming, and anhydrous nitric acids were used with and without additives. A diallylaniline - triethylamine mixture and a red fuming nitric acid analyzing 3.5 percent water and 16 percent NO2 by weight was found to have a wide temperature-pressure ignition range, yielding average delays from 13 milliseconds at 110 degrees F to 55 milliseconds at -95 degrees F regardless of the initial ambient pressure that ranged from sea-level pressure altitude of 94,000 feet.

XYLIDINE↗
NASA NTRS2020

The Evolution of Icelandic Volcano Emissions, as Observed From Space in the Era of NASA's Earth Observing System (EOS)

Volcanoes are natural phenomena that have global environmental impacts. Satellite remote sensing can help classify volcanic eruptions and track the dispersion of emissions. We assess multiple volcanic eruptions in Iceland (Eyjafjallajökull 2010, Grímsvötn 2011 and Holuhraun 2014-2015), using space-borne observations to infer information about the geological dynamics of each volcano and the properties and evolution of plume particles. We derive qualitative constraints on plume particle size, shape and light-absorption characteristics from Multi-angle Imaging SpectroRadiometer (MISR) space-borne imagery. With the MISR Research Algorithm (RA), we distinguish sulfate/water-dominated volcanic plumes from Holuhraun and ash-dominated plumes from Eyjafjallajökull and Grímsvötn, and even identify subtler changes in ash particle size and light-absorption within plumes. Additionally, plume heights are retrieved geometrically from MISR. These are combined with surface thermal anomalies from the MODerate resolution Imaging Spectroradiometer (MODIS) and SO2 concentrations derived from the Ozone Monitoring Instrument (OMI) to synthesize eruption remote-sensing chronologies. Signals related to differences in particle properties are identified and linked to evolving magma composition at Eyjafjallajökull. The results illustrate the potential to distinguish qualitative differences in eruptive magma composition based on particle light absorption and plume profile from remote-sensing. For the sulfate-rich Holuhraun plumes, the influence of aerosol hygroscopic growth during transport is inferred from such data. Three processes appear to dominate plume evolution in Iceland: downwind aerosol formation; particle hydration; and particle deposition. This work demonstrates enhanced MISR capabilities, and more generally, remote-sensing analysis that can be applied globally, especially where suborbital volcano observations are limited or entirely absent.

remote sensting↗
NASA NTRS2022

Recommendations for Developing Space Suit Integrated Food Systems and Delivering Nutrition Before, During, and After Lunar EVA

The concept of providing hydration and nutrition during extravehicular activity (EVA) is nearly as old as the space program itself. Astronauts currently have access to 32 ounces of water through a disposable in-suit drink bag (DIDB) while they are confined to their space suit. During the Apollo program, methods for providing food/nutrition to crewmembers in space suits were included as contingency solutions (1) but were eventually abandoned. The main reasons that provision of in-suit nutrition beyond water was discontinued after Apollo were the complicated engineering requirements, the additional mass and volume that was required for the applicable food formulations, hardware needed for a suit-specialized food system, and because the perceived need for in-suit nutrition during EVAs was not sufficient during the Space Shuttle and the International Space Station (ISS) eras. A custom-made 165-kcal fruit bar was fitted into the EVA suit during the Space Shuttle program, but crewmembers rarely consumed it during the EVA and rather chose to consume it before or after suited activities (2). Since 2011, between 4 and 13 EVAs have been conducted from the ISS each year, with durations ranging from 1:32 to 8:17 hours (https://www.nasa.gov/mission_pages/station/spacewalks ). It has been acceptable for the crewmembers to schedule food intake around these relatively infrequent suited activities. Because upcoming Artemis missions will include nominal 8-hour lunar exploration EVAs that are expected to increase in frequency to several (4 to 5) sorties per week (3), the desire for an in-suit nutrition system has increased. In preparation for these missions, requirements to provide in-suit nutrition has been outlined in the most recent NASA Human Spaceflight Standards documents (4). Establishing general recommendations for in-suit nutrition systems precedes the selection of a lunar EVA pressure suit system. The current document is intended to define the rationale for nutrition to support EVA (whether in-suit or from the pantry in the habitat), document the requirements, constraints, and crewmember preferences, and recommend necessary next steps for developing an in-suit EVA nutrition system. Assessments presented in this report include a review of commercial off-the-shelf (COTS) food products as potential in-suit formulations, a comparison of conceptual designs for delivering nutrition to a crewmember while confined to a space suit, an evaluation of space suit volume constraints for the placement of in-suit nutrition systems, and feedback from astronauts regarding preferences for nutrition support during EVA. Based on these assessments, recommendations were formulated that can be used to help develop a method to deliver nutrition safely and acceptably to a crewmember while they are confined to a space suit for an EVA duration of up to 8 hours, and a total time in the suit of up to 12 hours.

space suit↗
NASA NTRSDate not supplied

Recommendations for Developing Space Suit Integrated Food Systems and Delivering Nutrition Before, During, and After Lunar EVA

INTRODUCTION Artemis missions will include a higher tempo and frequency of extravehicular activities (EVAs) than any previous space program. Because of the physical demands expected from the crew, future space suit designs are required to incorporate nutritional support to the astronauts during lunar surface EVAs lasting longer than 4 hours. The purpose of this project was to provide recommendations to aid the development of an in-suit system that can adequately, safely, and acceptably deliver nutrition to a crewmember while confined to a space suit during EVA. METHODS Physiological, logistical, and engineering aspects of potential in-suit nutrition approaches were assessed through literature reviews, assessments of commercial off the shelf (COTS) foods, suit volumetric modeling, and feedback from subject matter experts and crewmembers. Key driving factors in the development of in-suit nutrition requirements included how much and what type of nutrition should be included, what food formulations are appropriate and safe, what are inherent limitations of space suits, what are the potential risks to the crewmember in the suit, and what practices and preferences from astronauts should be considered. Design references were conceptualized and assessed for strengths and limitations as potential in-suit nutrition systems for surface EVA. RESULTS Acute exogenous energy demands vary greatly depending on activity intensity and duration, and partial energy replenishment (i.e., 60–80 kcal∙hr-1 of EVA, or 460–680 kcal for EVAs lasting up to 8 hours) during activities could improve performance, safety, and recovery. COTS foods capable of providing these energy requirements exist; however, no COTS foods have been identified that pass NASA flight standards for microbiological safety and stability. In-suit nutrition delivery design references that were considered included in-suit concepts for a prefilled drink bag, a hydratable drink bag, and a solid food stick. In addition, a helmet feed port concept was considered for use with drink bags external to the suit. Volumetric models of the in-suit drink bag concepts, based on xEMU dimensions, indicate challenges of fitting formulations > 200 ml (equating to approximately 200 kcal). Astronaut feedback on the four concepts indicated that despite some individual preferences for inclusion of solid foods and helmet port designs, the prefilled drink bag concept was the most preferred. A prefilled drink bag can only be used if food safety and stability can be ensured, possibly requiring advancements in food delivery hardware. CONCLUSION The ability to meet the increased need for nutrition during surface EVAs through provision of nutrients in the suited configuration would benefit overall crew health, performance, and morale, and thus increase the likelihood of mission success. It is recommended that in-suit nutrition capabilities provide at least 400–600 kcal within the suit during EVAs lasting > 4 hours and that suit designs include a dedicated volume for food grade nutrition systems. The developed food system should either allow for 1) installation of prefilled (sealed sterile) liquid nutrition in the suit and provide a mechanism to break the seal at the time that consumption is desired or 2) demonstrate that the unsealed food product shelf life allows for safe consumption after at least 12 hours of EVA.

space suit↗
NASA NTRS1965

Didymium compound improves nickel-cadmium cell

Nickel electrodes impregnated with an additive solution of didymium hydrate and nitric acid mixed with nickel nitrate increases ampere-hour capacity of cells and does not affect the voltage characteristics.

Source record↗
NASA NTRS1963

Water in Lunar Materials

Two lines of evidence, suggest independently that materials which formed the Moon were not anhydrous: 1. Meteorites, our only sample of extraterrestrial material, contain water in varying amounts. Chondrites average about 0.25% water by weight. Carbonaceous chondrites, however, contain up to 20% water; and, although much of this water may be adsorbed atmospheric and surface water, the abundance of silicate hydrates in these objects indicates that considerable water existed in these meteorites before Earth impact. 2. The gas emission from Alphonsus observed by Kosyrev indicates that volatiles are diffusing out of the Moon. The observed emission was a C, band. Analyses of presumably juvenile gases reaching the Earth's surface show that water generally composes 95% or more of the gas. By analogy, it is suggested that water must be reaching the lunar surface. Consequently, it is reasonable to conclude that water existed in the materials which formed the Moon as well as those which formed the Earth or meteorites (or their source object). An estimate of the water content of the primordial Earth is 0.03%.

Speed, R. C.↗
NASA NTRS1969

Corrosion reduction of aluminum alloys in flowing high-temperature water

Report describes a technique for reducing the corrosion rate of aluminum by adding colloidal substances in a closed-loop system. Experimental work shows that the addition of graphite and colloidal hydrated aluminum oxide significantly reduces the corrosion rate in flowing high-temperature water.

Draley, J. E.↗
NASA NTRS1969

Laser action from a terbium beta-ketoenolate at room temperature

Laser activity is achieved in a solution of terbium tris at room temperature in a liquid solvent of acetonitrile or p-dioxane. After precipitation, the microcrystals of hydrated tris chelate are filtered, washed in distilled water, and dried. They show no signs of deterioration after storage.

Bjorklund, S.↗