SEARCH · Engineering Papers

Results for “Heat generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Interfacial temperatures and surface heat fluxes during a blade-seal rubbing process

A thermal analysis was made of a blade-seal configuration to determine the effects of thermal contact resistance, blade speed, and thermal properties upon the interfacial temperature. The analysis disclosed that while the thermal properties of the blade or the seal specimen strongly affect the temperatures in their respective parts, the factors which control the overall temperature field are the contact resistance and the heat generated at the interface.

Emery, A. F.↗

NASA NTRS1981

The tectonics of anorthosite massifs

Anorthosite massifs developed approximately 1.4 to 1.5 billion years ago along an arch which developed parallel to a zone of continental separation as a block which included North America, Europe, and probably Asia separated from a block which included parts of South America, Africa, India, and Australia. Anorthosite massifs also developed at the same time along a belt which runs through the continents which comprise Gondwanaland (South America), Africa, India, Australia, and Antarctica. This was a zone of continental separation which subsequently became a zone of continental collision about 1.2 billion years ago. The northern anorthosite belt also parallels an orogenic belt which was active between 1.8 and 1.7 billion years ago. Heat generated during this mountain building period helped in the formation of the anorthosites.

Seyfert, C. K.↗

NASA NTRS1982

Finite element analysis of nonisothermal polymer processing operations

A finite element formulation for the analysis of polymer processing is presented and its use in some typical situation including entry flow, transient Couette flow, and the Graetz (forced convection) problem is illustrated. The element formulations are constructed on the premise that momentum convection can be neglected (polymer melt flows typically have very low Reynolds' numbers), but that convective heat transfer may be significant (high Peclet numbers). Nonisothermal effects are considered important in polymer processing, due in part to the significant heating which may occur due to viscous dissipation, and also to the very strong influence of temperature on fluid viscosity. The flow is treated as Newtonian with the flow field being coupled to the heat transfer equation only through the viscous heat generation.

Douglas, C.↗

NASA NTRS1981

Automotive absorption air conditioner utilizing solar and motor waste heat

In combination with the ground vehicles powered by a waste heat generating electric motor, a cooling system including a generator for driving off refrigerant vapor from a strong refrigerant absorbant solution is described. A solar collector, an air-cooled condenser connected with the generator for converting the refrigerant vapor to its liquid state, an air cooled evaporator connected with the condenser for returning the liquid refrigerant to its vapor state, and an absorber is connected to the generator and to the evaporator for dissolving the refrigerant vapor in the weak refrigerant absorbant solution, for providing a strong refrigerant solution. A pump is used to establish a pressurized flow of strong refrigerant absorbant solution from the absorber through the electric motor, and to the collector.

Popinski, Z.↗

NASA NTRS1982

Self-adaptive closed constrained solution algorithms for nonlinear conduction

Self-adaptive solution algorithms are developed for nonlinear heat conduction problems encountered in analyzing materials for use in high temperature or cryogenic conditions. The nonlinear effects are noted to occur due to convection and radiation effects, as well as temperature-dependent properties of the materials. Incremental successive substitution (ISS) and Newton-Raphson (NR) procedures are treated as extrapolation schemes which have solution projections bounded by a hyperline with an externally applied thermal load vector arising from internal heat generation and boundary conditions. Closed constraints are formulated which improve the efficiency and stability of the procedures by employing closed ellipsoidal surfaces to control the size of successive iterations. Governing equations are defined for nonlinear finite element models, and comparisons are made of results using the the new method and the ISS and NR schemes for epoxy, PVC, and CuGe.

Padovan, J.↗

NASA NTRS1984

Burner-Injector-Post Tip

Bimetallic tips attached to injector posts improve burner performance and reliability. Tip allows excess heat generated at tip to be dissipated circumferentially and axially through thermal conduction.

Wagner, W. R.↗

NASA NTRS1981

Broadband optical radiation detector

A method and apparatus for detecting optical radiation by optically monitoring temperature changes in a microvolume caused by absorption of the optical radiation to be detected is described. More specifically, a thermal lens forming material is provided which has first and second opposite, substantially parallel surfaces. A reflective coating is formed on the first surface, and a radiation absorbing coating is formed on the reflective coating. Chopped, incoming optical radiation to be detected is directed to irradiate a small portion of the radiation absorbing coating. Heat generated in this small area is conducted to the lens forming material through the reflective coating, thereby raising the temperature of a small portion of the lens forming material and causing a thermal lens to be formed therein.

Gupta, A.↗

NASA NTRS1983

Predicted and experimental performance of large-bore high-speed ball and roller bearings

The values of inner and outer race temperature, cage speed, and heat transferred to the lubricant or bearing power loss, calculated using the computer programs Shaberth and Cybean, with the corresponding experimental data for the large bore ball and roller bearings were compared. After the development of computer program, it is important that values calculated using such program are compared with actual bearing performance data to assess the programs predictive capability. Several comprehensive computer programs currently in use are capable of predicting rolling bearing operating and performance characteristics. These programs accept input data of bearing internal geometry, bearing material and lubricant properties, and bearing operating conditions. The programs solve several sets of equations that characterize rolling element bearings. The output produced typically consists of rolling element loads and Hertz stresses, operating contact angles, component speed, heat generation, local temperatures, bearing fatigue life, and power loss. Two of these programs, Shaberth and Cybean were developed.

Coe, H. H.↗

NASA NTRS1983

Bearing tester data compilation, analysis, and reporting and bearing math modeling

The Shaberth bearing analysis computer program was developed for the analysis of jet engine shaft/bearing systems operating above room temperature with normal hydrocarbon lubricants. It is also possible to use this tool to evaluate the shaft bearing systems operating in cryogenics. Effects such as fluid drag, radial temperature gradients, outer race misalignments and clearance changes were simulated and evaluated. In addition, the speed and preload effects on bearing radial stiffness was evaluated. The Shaberth program was also used to provide contact stresses from which contact geometry was calculated to support other analyses such as the determination of cryogenic fluid film thickness in the contacts and evaluation of surface and subsurface stresses necessary for bearing failure evaluation. This program was a vital tool for the thermal analysis of the bearing in that it provides the heat generation rates at the rolling element/race contacts for input into a thermal model of the bearing/shaft assembly.

Source record↗

NASA NTRS1983

Hypergravic fields and parallel controllers for thermoregulation

To test the proposal that mammals have parallel neurocontrollers for temperature regulation, Long-Evans hooded male rats were exposed to cold while in a 3-G field. When exposed to cold, these rats consumed 35 percent less oxygen/min at 3 G than they did when exposed to cold at 1 G. However, rats acclimated for 6 wk to 5 C consumed oxygen at the same rate during cold exposure at 3 G as at 1 G. Because cold-acclimated rats generate heat primarily by nonshivering thermogenesis while rats acclimated to room temperature rely to a greater extent on shivering, the 35 percent decrease in oxygen consumption of cold-exposed room-temperature rats in 3-G fields may reflect an inactivation of shivering. These oxygen consumption measurements, together with measurements of core and tail temperatures of rats in 3-G fields, are consistent with the proposal that neurocontrollers for thermoregulation are arranged in parallel and can be uncoupled by hypergravic fields.

Monson, C. B.↗

NASA NTRS1985

Improved Ellipsoidal Radiation Furnace

Spherical reflector around heat source increases efficiency and minimizes power requirements. Furnace consists of ellipsoid with point heat source, at one focus and sample heated at other focus. Spherical reflector with circular slit surrounds heat source. All radiation not passing through circular slit in spherical reflector reflected back to lamp. Radiation passing through spherical slit focused by ellipsoid surface onto sample. Arrangement uses heat efficiently, reduces waste heat generation and permits full view of specimen.

Ethridge, E. C.↗

NASA NTRS1984

Diesel engine catalytic combustor system

A low compression turbocharged diesel engine is provided in which the turbocharger can be operated independently of the engine to power auxiliary equipment. Fuel and air are burned in a catalytic combustor to drive the turbine wheel of turbine section which is initially caused to rotate by starter motor. By opening a flapper value, compressed air from the blower section is directed to catalytic combustor when it is heated and expanded, serving to drive the turbine wheel and also to heat the catalytic element. To start, engine valve is closed, combustion is terminated in catalytic combustor, and the valve is then opened to utilize air from the blower for the air driven motor. When the engine starts, the constituents in its exhaust gas react in the catalytic element and the heat generated provides additional energy for the turbine section.

Ream, L. W.↗

NASA NTRS1983

X-rays from radio pulsars - The portable supernova remnants

Neutron stars are the longest-lived remnants of supernova explosions. As a reservoir of thermal energy remaining from the explosion and generated by frictional coupling between core and crust, as a storehouse of magnetic and rotational kinetic energy which allows the star to act as a high energy particle accelerator, and as the source of a deep gravitational potential which can generate heat from infalling matter, neutron stars remain capable of producing high energy radiation for a Hubble time. The results of an extensive survey of supernova remnants and radio pulsars performed with the imaging instruments on board the Einstein Observatory are reviewed and the implications of these results for pulsar physics and for the origin and evolution of galactic neutron stars are discussed.

Helfand, D. J.↗

NASA NTRS1986

Bearing Thermal Performance Prediction

Parameter called lubricant percent volume or cavity factor (XCAV) used primarily in calculation of ball or roller drag and, therefore, significantly affects calculated bearing-heat generation and temperature distribution. New equation accounts for sensitivity of XCAV to shaft speed, lubricant flow rate, and bearing size, and provides significant improvement over previous estimation methods.

Parker, R. J.↗

NASA NTRS1985

Development of new materials for turbopump bearings

The life requirement for the angular contact ball bearings in the Space Shuttle Main Engine (SSME) high pressure oxygen turbopump (HPOTP) is 7.5 hours. In actual operation, significantly shorter service life was experienced. The objective is to identify bearing materials and/or materials processing techniques offering signficant potential for extending HPOTP bearing performance life. Interactive thermomechanical analysis of the HPOTP bearing-shaft system was performed with the SHABERTH computer program. Bearing fatigue life, ball-race contact stress, heat generation rate, bulk ring temperatures and circumferential stress in the inner rings were quantified as functions of radial load, thrust load and ball-race contact friction. Criteria established from the output of this analysis are being used for material candidate selection.

Maurer, R. E.↗

NASA NTRS1983

An experimental investigation and numerical prediction of thermomechanical phenomena in high speed rotor tip rubbing

A thermomechanical study of the intermittent rubbing of a rotor blade tip and a casing seal is carried out taking into account the existence of thermal contact resistance. The effect of the thermal properties of a plasma sprayed coating on the blade tip is studied. The influence of a variable heat generation and variable thermal contact resistance at the blade tip as it passes along the path of rubbing is also discussed.

Emery, A. F.↗

NASA NTRS1986

Solar-Powered Water Electrolyzer

Electrolyzer produces hydrogen and oxygen from water using solar photovoltaic electricity directly, without conditioning. Hydrogen used as energy-storage medium to be burned when needed to generate heat or electricity for domestic use.

Hancock, Omar J., Jr.↗

NASA NTRS1986

Exploiting the Vacuum of Space

Molecular-beam epitaxy and other processes tested with minimal contamination. Vacuum experimental facility for outer space creates vacuums higher than those available in terrestrial vacuum chambers. Facility minimizes contamination of work from walls and allows rapid removal of gases and heat generated by experimental processes. Used for processes such as molecular-beam epitaxy (growing semiconductor superlattices), metal/organic chemical vapor deposition, coating mirrors and other optical components, and ultrapurification.

Naumann, R. J.↗