Liquid fluorine feed system component design criteria
Liquid fluorine feed system valves, seals and seats, discussing design criteria for flight weight components
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Liquid fluorine feed system valves, seals and seats, discussing design criteria for flight weight components
Microwave feeding system for heating and cooking prepackaged meals during extended space missions
Parabolic antenna properties generated by dual band circularly polarized focused two channel monopulse feed system, discussing tracking data from helicopter, Apollo 8 and Cassiopeia A
Dual channel circularly polarized feed of monopulse tracking antenna system, noting axial ratio and gain and open loop mode autotracking
System incorporating two or more radial feed assemblies tracks and communicates with multiple moving transmitters, receivers, or transponders. System utilizes a fixed parabolic reflector or other beam-forming device such as a lens or spherical reflector.
Antenna with novel two-port diplexer separates high power /31.65 GHz/ transmitted signal from low power /15.2 GHz/ received signal. Two-port network feeds dual-frequency horn and excites antenna with minimal loss in power. Isolation between transmit port and receive port ranges from 60 db to 80 db.
Design and operation of multi-feed cone Cassegrain antenna
Characteristics of antenna horn feeds consisting of central horn with overlapping peripheral horns
Beam equalization in large Cassegrain antennas with parabolic horn reflector feeds
Development and characteristics of low-noise multimode monopulse antenna feed system for use with microwave communication equipment
Polarization diverse S band feed cone for DSIF reflector antennas
Internal labyrinth and shield structure to improve electrical isolation of propellant feed source from ion thrustor
Liquid fluorine feed system valves, seals and seats, discussing design criteria for flight weight components
Helical induction boiler feed electromagnetic pump design, fabrication and testing for potassium Rankine cycle space power system
A three-phase helical induction electromagnetic pump, designed for the boiler-feed pump of a potassium Rankine-cycle space power system, was built and tested. The pump was tested over a range of potassium temperatures from 900 to 1400 F, flow rates from 0.75 to 4.85 lb/sec, developed pressures up to 340 psi, net positive suction heads (NPSH) from 1 to 22 psi, and NaK coolant temperatures from 800 to 950 F. The maximum efficiency at the pump design point of 3.25 lb/sec flow rate, 240 psi developed pressure, 1000 F potassium inlet temperature, and 800 F NaK coolant temperature was 16.3 percent. The tests also showed successful operation of the pump at an NPSH as low as 1.5 psi without cavitating.
A three-phase helical induction electromagnetic pump designed for the boiler feed pump of a potassium Rankine cycle space power system was developed and built. It was mounted in a liquid metal test loop and successfully tested over a range of potassium temperatures from 900 to 1400 F, flow rates from 0.75 to 4.85 lb/sec, developed pressures up to 340 psi, net positive suction head from 1 to 22 psi, and NaK coolant temperatures from 800 to 950 F. Maximum efficiency at design point conditions of 3.25 lb/sec flow rate, 240 psi developed head, 1000 F potassium inlet temperature, and 800 F NaK coolant inlet temperature was 16.3 percent. After the performance tests the pump was operated without any difficulty at design point for 10,000 hours, and then a limited number of repeat performance tests were made. There was no appreciable change in pump performance after 10,000 hours of operation. A supplementary series of tests using the quasi-square wave power output of a dc to three-phase ac inverter showed that the pump would operate without difficulty at a frequency as low as 25 Hz, with little loss in efficiency.
A three-phase helical induction electromagnetic (EM) pump has been designed and built. This pump was designed for use as the boiler-feed pump of a potassium Rankine-cycle space electric power system. The pump is constructed of high temperature materials including a T-111 duct, Hiperco 27 magnetic material, nickel clad silver conductor wire, and a completely inorganic insulation system. The pump is designed to deliver 3.25 lb/sec potassium at 1000 F with a developed head of 240 psi while being cooled by 800 F NaK. At these conditions, the overall pump efficiency is expected to be 18%.