Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FURNACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Reduction Mechanism of Iron Oxide Briquettes by Carbonaceous Materials Extracted from Blast Furnace Dust

The reducibility of carbonaceous powder extracted from blast furnace dust was investigated. In this study, pickling treatment was used for BF bag dust and BF gravitational dust to extract the carbonaceous material. The structural characteristics of carbonaceous material were studied by X-ray diffraction, scanning electron microscope, and energy-dispersive spectrometer. The reduction of ferric oxide and carbon gasification experiments were researched by thermogravimetry. The results show that the pickled raw coal gives the highest reducibility, which is followed by BF bag dust and BF gravitational dust. The reason for this is that the higher disordered crystalline structure leads to stronger gasification reactivity, and further results in stronger reduction reactivity. Based on the randomized nucleation model, the kinetic analysis shows that the activation energies for the reduction reaction of BF gravitational dust, BF bag dust, and raw coal after pickling are 300.14, 180.43, and 124.62 kJ mol{sup −1}, respectively.

36 MATERIALS SCIENCE↗

The Importance of Viscous and Interfacial Forces in the Hydrodynamics of the Top-Submerged-Lance Furnace

The purpose of this work is to focus on the hydrodynamics of a Top-Submerged-Lance (TSL) smelting furnace, understanding how liquid properties and operational parameters act on key factors of a TSL process, such as splashing, mixing, mass transfer area, and bubble development. A deep knowledge of all those aspects is needed since they all influence the smelting reaction rates; hence the efficiency of the reactor. The characterization and scaling of the TSL gas injection are commonly based on the modified Froude number, the ratio of dynamic and gravitational forces. Detailed literature research reveals a potential weakness of this approach, since it does not consider the effects of viscosity and surface tension. To investigate this question an extensive parametric study was performed applying computational fluid dynamics to cold and non-reactive flows, which provided a broad overview of the physics of the flow. The analysis was performed on fluid dynamic properties (liquid density, liquid viscosity, surface tension) and operational variables (gas volume flow, lance immersion depth). The coupled Level Set—Volume of Fluid model, available in the commercial solver ANSYS Fluent{sup ®}, was used to resolve the gas–liquid interface in the multiphase flow. The results of the work underscore the significance of the viscous and interfacial forces for gas injection in smelting slags, confirming the incompleteness of applying only the Froude number to describe such flows.

36 MATERIALS SCIENCE↗

Improving the Modeling of Slag and Steel Bath Chemistry in an Electric Arc Furnace Process Model

An improvement to the thermochemical module of the electric arc furnace (EAF) process model developed by Meier based on the work of Logar, Dovžan, and Škrjanc is presented. Different models for the calculation of activities in melt and slag are implemented, and separate reaction zones are defined for the interaction of slag and melt, the injection of oxygen, and the injection of carbon. For each zone, equilibrium compositions and reaction rates are calculated. Furthermore, diffusion of species is considered as a rate-limiting factor in reactions between slag and melt, and diffusion rates are calculated from the bulk melt to the reaction zone where reactions with the slag take place. Oxygen and sulfur dissolved in the melt and CaS in the slag are added as new species not previously considered in the EAF model. The treatment of carbon is revised to reduce model complexity and improve accuracy. The improved model is validated using extensive data from an industrial EAF, and results are compared to measured data as well as results obtained with the unmodified model. The different models for the determination of thermodynamic activities and their impacts on the duration of the simulation as well as its results are evaluated.

36 MATERIALS SCIENCE↗

Assessment of Physicochemical Properties of Electrical Arc Furnace Slag and Their Effects on Foamability

The composition of slags of an electric arc furnace (EAF) in a commercial melt shop was systematically analyzed with a focus on slag foaming. Basic behavior of FeO in an EAF slag was confirmed using fundamental thermodynamics. Monoxide ([Mg,Fe,Mn]O = M’O) and spinel ([Mg,Fe]Al{sub 2}O{sub 4}) phases in EAF slag were confirmed by X-ray diffraction analysis, and these results were interpreted in the context of equilibrium cooling calculation using FactSage™ software. Furthermore, the distribution of MgO with respect to the M’O-saturation limit at different basicity ratios (=CaO/SiO{sub 2}=C/S) and temperatures was evaluated. In particular, the relationship between MgO and FeO for C/S ratios ranging from 1.3 to 1.6 was considered with reference to phase equilibria. Foam height was affected by slag viscosity (η) and gas generation according to changes in C/S ratio and FeO content. Foaming index (Σ) decreased with the increasing C/S ratio and FeO content. The measured foam heights were relatively higher than the calculated values, and the result indicates that the effect of M’O on slag foaming in commercial process is remarkable. Therefore, slag chemistry should be optimized based on thermodynamic considerations and thermophysical properties to achieve good foaming characteristics.

36 MATERIALS SCIENCE↗

Basic Oxygen Furnace: Assessment of Recent Physicochemical Models

Modeling of the basic oxygen furnace (BOF) process, both for online monitoring and fundamental research, has gained importance in steelmaking industry over the past few decades. Especially models integrating fundamental physicochemical relations are appealing. Even though a vast amount of these kind of models and submodels can be found in the literature, no recent review paper is available which thoroughly discusses the most up-to-date BOF modeling methods. This study aims to do so. In the introductory chapters, an overview is given on the assumptions and models for underlying BOF phenomena, which are frequently used in the BOF models and submodels. Focus was put on six models with emphasis on the chemical aspect of the BOF process. For each model, its assumptions are given and subsequently evaluated, highlighting both their strengths and limitations. The six different models are also compared with each other. Finally, opportunities for future research are discussed.

36 MATERIALS SCIENCE↗

Correction to: The Importance of Viscous and Interfacial Forces in the Hydrodynamics of the Top-Submerged-Lance Furnace

The article The Importance of Viscous and Interfacial Forces in the Hydrodynamics of the Top-Submerged-Lance Furnace, written by Obiso et al. was originally published electronically on the publisher’s internet portal on July 3, 2019 without open access. With the author(s)’ decision to opt for Open Choice the copyright of the article changed on October 3, 2019 to © The Author(s) 2019 and the article is forthwith distributed under a Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

36 MATERIALS SCIENCE↗

Three-dimensional simulation of the pulverized coal combustion inside blast furnace tuyere

Here, a three-dimensional multi-phase model using Eulerian approach has been developed to simulate the coal heat transfer, devolatilization and combustion process inside a blast furnace tuyere. The information including velocity field, temperature distribution and combustion characteristics has been obtained in details and the effect of coal particle diameter, coal type and coal injection angle on the pulverized coal combustion process has been presented. The predicted results show that the coal combustion process inside tuyere are affected by coal particle size, coal type and coal injection angle. For the smaller coal particle diameter, the volatile matter released from the coal more rapidly, this results in a higher coal burnout at the exit of the tuyere. The coal burnout is depended on the coal volatile matter content; a higher coal burnout will be obtained for the coal with a higher volatile matter content. Furthermore, the coal injection angle affects the flow patter inside the tuyere, which results in a different mixing and burning process of the pulverized coal. When the coal diameter changes from 30 μm to 90 μm, the coal burnout decreases from 51.03% to 44.21%; when the coal volatile matter is reduced from 34.32% to 19.95%, the coal burnout decreases from 46.04% to 35.02% and for the coal injection with an angle, the coal burnout is 46.04%, a little bit higher than that of 44.51% without injection angle.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag

The use of calcium oxide (CaO) demonstrates a superior potential for the activation of ground granulated blast furnace slag (GGBFS), and it produces a higher mechanical strength than calcium hydroxide [Ca(OH){sub 2}]. The mechanical strength differences between CaO- and Ca(OH){sub 2}-activated GGBFS binders are explored using isothermal calorimetry, powder X-ray diffraction, thermogravimetric and differential thermal analysis (TGA and DTA) as well as compressive strength testing. Calcium silicate hydrate (C–S–H), Ca(OH){sub 2} and a hydrotalcite-like phase are found as reaction products in all samples. The TGA and DTA results indicate that the use of CaO produces more C–S–H, although this is not likely to be the primary cause of higher strength development in the CaO-activated GGBFS. Rather, other factors such as porosity may govern the strength at a higher order of magnitude. Significant reduction of Ca(OH){sub 2} occurs only with the use of Ca(OH){sub 2}, followed by the formation of carbonate (CaCO{sub 3}), indicating carbonation. -- Highlights: •CaO showed a better potential for the activation of GGBFS than Ca(OH){sub 2}. •Strength test, XRD, TGA/DTA and isothermal calorimetry are used. •C-S-H, Ca(OH){sub 2}, and a hydrotalcite-like phase are found in all samples. •The use of Ca(OH){sub 2} causes some degree of carbonation.

36 MATERIALS SCIENCE↗

Effect of blast furnace slag on self-healing of microcracks in cementitious materials

The physico-chemical process of self-healing in blast furnace slag cement paste was investigated in this paper. With a high slag content i.e., 66% in cement paste and saturated Ca(OH)₂ solution as activator, it was found that the reaction products formed in cracks are composed of C-S-H, ettringite, hydrogarnet and OH–hydrotalcite. The fraction of C-S-H in the reaction products is much larger than the other minerals. Large amount of ettringite formed in cracks indicates the leaching of SO₄⁻² ions from the bulk paste and consequently the recrystallization. Self-healing proceeds fast within 50 h and then slows down. According to thermodynamic modeling, when the newly formed reaction products are carbonated, the filling fraction of crack increases first and then decreases. Low soluble minerals such as silica gel, gibbsite and calcite are formed. Compared to Portland cement paste, the potential of self-healing in slag cement paste is higher when the percentage of slag is high. Highlights: • Self-healing reaction products in slag cement paste were characterized. • Self-healing reaction products formed in time were quantified with image analysis. • Self-healing in slag cement paste was simulated with a reactive transport model. • Effect of carbonation on self-healing was investigated by thermodynamic modeling. • Effect of slag on self-healing was discussed based on experiments and simulation.

36 MATERIALS SCIENCE↗

Characterisation of magnesium potassium phosphate cements blended with fly ash and ground granulated blast furnace slag

Magnesium potassium phosphate cements (MKPCs), blended with 50 wt.% fly ash (FA) or ground granulated blast furnace slag (GBFS) to reduce heat evolution, water demand and cost, were assessed using compressive strength, X-ray diffraction (XRD), scanning electron microscopy (SEM) and nuclear magnetic resonance (NMR) spectroscopy on {sup 25}Mg, {sup 27}Al, {sup 29}Si, {sup 31}P and {sup 39}K nuclei. We present the first definitive evidence that dissolution of the glassy aluminosilicate phases of both FA and GBFS occurred under the pH conditions of MKPC. In addition to the main binder phase, struvite-K, an amorphous orthophosphate phase was detected in FA/MKPC and GBFS/MKPC systems. It was postulated that an aluminium phosphate phase was formed, however, no significant Al–O–P interactions were identified. High-field NMR analysis of the GBFS/MKPC system indicated the potential formation of a potassium-aluminosilicate phase. This study demonstrates the need for further research on these binders, as both FA and GBFS are generally regarded as inert fillers within MKPC.

36 MATERIALS SCIENCE↗

Chemical acceleration of a neutral granulated blast-furnace slag activated by sodium carbonate

This paper presents results of a study on chemical acceleration of a neutral granulated blast-furnace slag activated using sodium carbonate. As strength development of alkali-activated slag cements containing neutral GBFS and sodium carbonate as activator at room temperature is known to be slow, three accelerators were investigated: sodium hydroxide, ordinary Portland cement and a combination of silica fume and slaked lime. In all cements, the main hydration product is C–(A)–S–H, but its structure varies between tobermorite and riversideite depending on the accelerator used. Calcite and gaylussite are present in all systems and they were formed due to either cation exchange reaction between the slag and the activator, or carbonation. With accelerators, compressive strength up to 15 MPa can be achieved within 24 h in comparison to 2.5 MPa after 48 h for a mix without an accelerator.

36 MATERIALS SCIENCE↗

Characterization of novel blast-furnace slag cement pastes and mortars activated with a reactive mixture of MgO-NaOH

This paper reports results of strength and reaction products of blast-furnace slag cements activated using a mixture of MgO-NaOH with a ratio 50/50 incorporated at 4, 6 and 8% relative to the slag mass. Pastes and mortars were prepared and cured at 20 °C and 60 °C-24 h-20 °C up to 90 days. The results indicated that the combination of MgO-NaOH acts as an effective alkaline activator of the slag, as samples cured at 20 °C developed 54 MPa at 90 days, while those at 60 °C-24 h-20 °C had a rapid strength gain at early ages but in the long run strengths of ~42 MPa at 90 days were observed. The microstructures consisted of (C-(A)-S-H), third aluminate hydrates and hydrotalcite. The formation of the latter increased at higher MgO:NaOH concentration lowering the Al uptake by C-S-H. MgO and Mg(OH){sub 2} were not detected, indicating an effective incorporation of Mg{sup 2+} ions into the atomic structure of the reaction products.

36 MATERIALS SCIENCE↗

Coordination environment of Si in calcium silicate hydrates, silicate minerals, and blast furnace slags: A XANES database

Understanding the silicate polymerization of calcium silicate hydrate (C-S-H) gel and its crystalline polymorphs is important in cement science. NMR can determine Si environments, but the measurement can be time-consuming and provides no spatial information. X-ray absorption near-edge structure (XANES) spectroscopy is a fast tool for probing Si coordination, possibly with spatial information. However, there lacks an understanding of Si K-edge XANES spectra of cement-related silicate phases. Here, a Si K-edge XANES spectral database of nanocrystalline C-S-H, C-S-H minerals, blast-furnace slags, and metakaolin is provided. Si K-edge of C-S-H minerals shifts to higher energies with higher polymerized Si and lower CaSi connectivity in the Si second nearest neighbor shell. Si K-edge energy shows weak correlations with Ca/Si ratio, average SiO bond length, and SiO{sub 4} distortion due to the structural complexity of silicates. The substitution of Al for Si shifts the Si K-edge of tobermorite and slags to higher energies.

36 MATERIALS SCIENCE↗

Electron Backscatter Diffraction of a Ge Growth Tip from a Vertical Gradient Freeze Furnace

The growth-tip region of a high-purity 4.2-cm diameter Ge boule grown using low-pressure Bridgman methods in a vertical gradient freeze furnace was sectioned and polished in preparation for scanning electron microscopy and was characterized using electron backscatter diffraction (EBSD). The boule had a characteristic conical tip region with cone angle of 40° of a right circular cylinder from which a section was taken along the boule longitudinal centerline with an approximate surface area of 4 cm 2 . The majority of this surface area was characterized using EBSD and an image collage was assembled for the tip region. The grain structure, grain boundary orientation, twin structure, and overall crystal growth direction were determined. A crystal growth direction of approximately <112> was observed, which was also identified as the growth direction of several prominent twins observed in the tip region. The grain structure of the tip region appeared to be controlled by the sidewall nucleation of a stray grain that competed for dominance during growth. Grain boundaries and triple grain junctions were identified as low-energy coincident-site-lattice (CSL) boundaries and junctions of the Σ3 and Σ9 types.

36 MATERIALS SCIENCE↗

Electron backscatter diffraction analysis of a CZT growth tip from a vertical gradient freeze furnace

Electron backscatter diffraction (EBSD) was used to characterize the growth-tip region of a 4.2-cm diameter CdZnTe (CZT) boule grown using low-pressure Bridgman method in a vertical gradient freeze furnace. The boule was sectioned and polished and a section taken along the boule longitudinal centerline with an approximate surface area of 1-cm 2 was used for optical and scanning electron microscopy. A collage was assembled using EBSD/SEM images to show morphological features, e.g., twin structure, grain structure, and overall crystal growth direction. Severely twinned regions originating from the tip and side walls were observed. The overall growth orientation was close to (1 1 0) and (1 1 2) directions. In some regions, the (0 0 1) poles of the CZT matrix aligned with the growth direction, while twins aligned such that (1 1 1) and (1 1 2) poles aligned with the growth direction. Finally, in some other areas, (1 1 2) or (0 1 1) poles of the CZT matrix aligned with the growth direction. New relationships between the CZT matrix and large Te polycrystalline particles were revealed: {1 1 2 - } CZT ΙΙ{1 1 - 0 0} Te and {0 0 1} CZT II{0 1 - 1 - 1} Te .

58 GEOSCIENCES↗

Optical design of a high radiative flux solar furnace for Mexico

In the present work, the optical design of a new high radiative flux solar furnace is described. Several optical configurations for the concentrator of the system have been considered. Ray tracing simulations were carried out in order to determine the concentrated radiative flux distributions in the focal zone of the system, for comparing the different proposals. The best configuration was chosen in terms of maximum peak concentration, but also in terms of economical and other practical considerations. It consists of an arrangement of 409 first surface spherical facets with hexagonal shape, mounted on a spherical frame. The individual orientation of the facets is corrected in order to compensate for aberrations. The design considers an intercepted power of 30 kW and a target peak concentration above 10,000 suns. The effect of optical errors was also considered in the simulations. (author)

14 SOLAR ENERGY↗

Volatilisation and oxidation of aluminium scraps fed into incineration furnaces

Highlights: Black-Right-Pointing-Pointer Aluminium packaging partitioning in MSW incineration residues is evaluated. Black-Right-Pointing-Pointer The amount of aluminium packaging recoverable from the bottom ashes is evaluated. Black-Right-Pointing-Pointer Aluminium packaging oxidation rate in the residues of MSW incineration is evaluated. Black-Right-Pointing-Pointer 80% of aluminium cans, 51% of trays and 27% of foils can be recovered from bottom ashes. - Abstract: Ferrous and non-ferrous metal scraps are increasingly recovered from municipal solid waste incineration bottom ash and used in the production of secondary steel and aluminium. However, during the incineration process, metal scraps contained in the waste undergo volatilisation and oxidation processes, which determine a loss of their recoverable mass. The present paper evaluates the behaviour of different types of aluminium packaging materials in a full-scale waste to energy plant during standard operation. Their partitioning and oxidation level in the residues of the incineration process are evaluated, together with the amount of potentially recoverable aluminium. About 80% of post-consumer cans, 51% of trays and 27% of foils can be recovered through an advanced treatment of bottom ash combined with a melting process in the saline furnace for the production of secondary aluminium. The residual amount of aluminium concentrates in the fly ash or in the fine fraction of the bottom ash and its recovery is virtually impossible using the current eddy current separation technology. The average oxidation levels of the aluminium in the residues of the incineration process is equal to 9.2% for cans, 17.4% for trays and 58.8% for foils. The differences between the tested packaging materials are related to their thickness, mechanical strength and to the alloy.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaluating the combustion reactivity of drop tube furnace and thermogravimetric analysis coal chars with a selection of metal additives

Opportunities exist for effective coal combustion additives that can reduce the carbon content of pulverized fuel ash (PFA) to below 6%, thereby making it saleable for filler/building material applications without the need for postcombustion treatment. However, with only limited combustion data currently available for the multitude of potential additives, catalytic performance under pulverized fuel (PF) boiler conditions has received relatively little attention. This paper therefore compares the reactivity of catalyzed bituminous coal chars from thermogravimetric analysis (TGA) with those generated by devolatilization in a drop tube furnace (DTF). The principal aim was to explore the fundamental chemistry behind the chosen additives' relative reactivities. Accordingly, all eight of the investigated additives increased the TGA burnout rate of the TGA and DTF chars, with most of the catalysts demonstrating consistent reactivity levels across chars from both devolatilization methods. Copper(I) chloride, silver chloride, and copper nitrate were thus identified as the most successful additives tested, but it proved difficult to establish a definitive reactivity ranking. This was largely due to the use of physical mixtures for catalyst dispersion, the relatively narrow selection of additives examined, and the inherent variability of the DTF chars. Nevertheless, one crucial exception to normal additive behavior was discovered, with copper(I) chloride perceptibly deactivating during devolatilization in the DTF, even though it remained the most effective catalyst tested. As a prolonged burnout at over 1000{sup o}C was required to replicate this deactivation effect on the TGA, the phenomenon could not be detected by typical testing procedures. Subsequently, a comprehensive TGA study showed no obvious relationship between the catalyst-induced reductions in the reaction's apparent activation energy and the samples recorded burnout rates.

01 COAL, LIGNITE, AND PEAT↗