Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEEDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Control of antenna-feed attitude and reflector vibrations in large spaceborne antennas by mechanical decoupling and movable dampers

Simple, practical methods for damping reflector vibrations and designing antenna-feed attitude control systems in large deployable spaceborne antennas are proposed. The former involves a movable damper which is positioned so that the rate-of-change of total vibrational energy is minimized. The latter introduces a mechanical decoupler between the flexible boom and the antenna-feed, whereby the feed-attitude control system can be designed independent of boom dynamics. The validity of these approaches are substantiated by analytical studies, computer simulation, and experimental studies.

Wang, P. K. C.↗

Multiple object fiber optics spectrograph feed for the Hale telescope

The preliminary design for a computer-controlled fiber-optics feed linking the 5-m Hale telescope at Palomar Observatory to the entrance slit of an astronomical spectrograph is presented. A 76-mm square field will be divided into ten strips containing two movable fibers each; the fibers can be moved by stepper-motor-driven lead screws to any position on the strip. The device is designed to allow the simultaneous spectrographic observation of many astronomical objects in a small angular field. A prototype feed using two fibers and manually commanded digital control is described in detail. Test observations of two bright O stars made in April, 1981 using the prototype with the Hale telescope are considered sufficiently positive to warrant construction of the 20-fiber feed, which would enhance the spectrographic-survey effectiveness of the telescope by a factor of ten.

Tubbs, E. F.↗

Directivity of planar array feeds for satellite reflector applications

Array-fed reflector antennas are used extensively in today's contour and multiple beam satellite antennas. To determine the directivity of these antennas theoretically, the total radiated power of the array feed must be accurately computed. In this paper, a closed-form expression for the radiated power is obtained for arrays with the well-known (cos theta q-type element patterns. The formulation is general, and takes into account polarization, nonsymmetric E- and H-plane element patterns, nonuniform element spacings and arbitrary complex excitation coefficients. Selective numerical data are presented to demonstrate the usefulness of this result. Comparisons are made with the available results obtained using direct numerical integration techniques, and with other available data based on less general formulations. Excellent agreement is observed for all cases. In particular, data are presented on the directivity of seven-element cluster feeds used in multiple beam designs, and an array feed for producing a contour beam covering the United States Eastern Time Zone (ETZ).

Rahmat-Samii, Y.↗

Dual-mode coaxial feed with low crosspolarisation

Design data for optimized TE(11)-TM(11) dual-mode coaxial prime focus feeds is presented. The optimized feeds have a crosspolarization below -30 dB, an input reflection coefficient below 0.1 and very little phase error in their radiation patterns, over a 5 percent bandwidth. Experimental patterns are also given that show that the theoretically derived design data can be relied upon. The optimized feeds are useful for paraboloidal reflectors with focal-length/diameter ratios in the range 0.3 to 0.5, and will give overall efficiencies as high as 70 percent or more with sidelobes below -30 dB.

Collin, R. E.↗

Directivity optimization of a reflector antenna with cluster feeds - A closed-form solution

The directivity of a reflector antenna deteriorates as the feed moves away from the focal point for beam scanning. This deterioration can be substantially reduced if a cluster feed instead of single feed is used to control a beam. A closed-form solution is presented for the cluster excitation to achieve the optimum directivity. For an offset 108 lambda parabolic reflector scanning 10 beamwidths, the optimum directivity achieved by a 19-element (seven-element) cluster is 12 dB (8 dB) higher than that of a single element. Comparison of the optimum-directivity design and the popular conjugate field matching design is made. When the cluster spacing d is greater than 1 lambda, it is found that the optimum directivity is higher than that of conjugate field matching (CFM) scheme by an insignificant amount, although the excitations of two designs can be quite different. For d less than 0.5 lambda, the optimum design may exhibit the supergain phenomenon, namely extremely high directivities achieved by an oscillatory cluster excitation.

Lam, P. T.↗

Phase-Center Extension for a Microwave Feed Horn

Corrugated cylindrical tube relocates phase center of Cassegrain antenna feed. Proposed modification increases aperture of Cassegrain antenna from 64 to 70 m. Relatively inexpensive extension moves phase center of feed without incurring cost of redesigning horn and relocating low-noise equipment. Extension does not affect polarization characteristics of feed.

Hartop, R. W.↗

Array feed synthesis for correction of reflector distortion and Vernier Beamsteering

An algorithmic procedure for the synthesis of planar array feeds for paraboloidal reflectors is described which simultaneously provides electronic correction of systematic reflector surface distortions as well as a Vernier electronic beamsteering capability. Simple rules of thumb for the optimum choice of planar array feed configuration (i.e., number and type of elements) are derived from a parametric study made using the synthesis procedure. A number of f/D ratios and distortion models were examined that are typical of large paraboloidal reflectors. Numerical results are presented showing that, for the range of distortion models considered, good on-axis gain restoration can be achieved with as few as seven elements. For beamsteering to +/- 1 beamwidth (BW), 19 elements are required. For arrays with either 7 or 19 elements, the results indicate that the use of high-aperture-efficiency elements (e.g., disk-on-rod and short backfire) in the array yields higher system gain than can be obtained with elements having lower aperture efficiency (e.g., open-ended waveguides). With 37 elements, excellent gain and beamsteering performance to +/- 1.5 BW are obtained independent of the assumed effective aperture of the array element. An approximate expression is derived for the focal-plane field distribution of the distorted reflector. Contour plots of the focal-plane fields are also presented for various distortion and beam scan angle cases. The results obtained show the effectiveness of the array feed approach.

Blank, S. J.↗

Calculated 70-meter antenna performance for offset L-band and C-band feeds

A series of calculations that were carried out in order to determine the performance of the new dual-shaped 70 meter antenna for feeds that are displaced from the focal ring are summarized. Calculations were carried out at 1.68 GHz (L-band) and 5.0 GHz (C-band) for a number of feed/subreflector configurations. The effects of feed displacement, feed pointing angle, subreflector tilt, and lateral subreflector movement are summarized. Of specific interest are gain, beam squint, and spillover noise temperature for each of the feed/subreflector configurations described above.

Hoppe, D.↗

Microwave time delays for the dual L-C-band feed system

A new dual-frequency feed system at Goldstone is designed to receive the Phobos spacecraft signal at L-band (1668 + or - 40 MHz) and transmit to the spacecraft at C-band (5008.75 + or - 5.00 MHz) simultaneously. Hence, calculations of the time delay from the C-band range calibration coupler to the phase center of the L-C dual feed and back to the L-band range calibration coupler are required to correct the range measurements. Time delays of the elements in the dual-frequency feed system are obtained mostly from computer calculations and partly from experimental measurements. The method used and results obtained are described.

Chen, J.↗

Array feed synthesis for correction of reflector distortion and Vernier beamsteering

An algorithmic procedure for the synthesis of planar array feeds for paraboloidal reflectors is described which simultaneously provides electronic correction of systematic reflector surface distortions as well as a Vernier electronic beamsteering capability. Simple rules of thumb for the optimum chioce of planar array feed configuration (i.e., the number and type of elements) are derived from a parametric study made using the synthesis procedure. A number of f/D ratios and distortion models were examined that are typical of large paraboloidal reflectors. Numerical results are presented showing that, for the range of distortion models considered, good on-axis gain restoration can be achieved with as few as seven elements. For beamsteering to +/- 1 beamwidth (BW), 19 elements are required. For arrays with either 7 or 19 elements, the results indicate that the use of high-aperture-efficiency elements (e.g., disk-on-rod and short backfire) in the array yields higher system gain than can be obtained with elements having lower aperture efficiency (e.g., open-ended waveguides). With 37 elements, excellent gain and beamsteering performance to +/- 1.5 BW are obtained independent of the assumed effective aperture of the array element. An approximate expression is derived for the focal-plane field distribution of the distorted reflector. Contour plots of the focal-plane fields are also presented for various distortion and beam scan angle cases. The results obtained show the effectiveness of the array feed approach.

Blank, Stephen J.↗

Reflector spillover loss of an open-ended rectangular and circular waveguide feed

An important and frequently used parameter in the design of a feed for a reflector antenna is the spillover loss. A set of spillover curves is presented for several common feeds, namely circular waveguides with TE11 or TE21 excitations, rectangular guides for the monopulse application, etc. The difference between two common methods of normalizing the feed input power is also discussed.

Lee, Shung WU↗

Ka-band feed arrays for spacecraft reflector antennas with limited scan capability: An overview

JPL and NASA are in the process of developing ground and spacecraft antenna systems at Ka-band frequencies for future deep space applications. The use of Ka-band (32-GHz down) communication will result in smaller ground and spacecraft antennas and associated equipment, and will provide larger bandwidths necessary for very high data rate communication and radio navigation. In this article, the use of a small phased array as a feed for a reflector antenna system with limited scan capability is addressed. Different feed and antenna configurations, as well as array architectures, are examined. Some theoretical and experimental parameters of a particular breadboard feed array developed by JPL and the University of Massachusetts are presented. Guidelines for the future direction of this effort are provided.

Jamnejad, V.↗

Ka-band dual frequency array feed for a low cost ACTS ground terminal

Because of low cost and ease of fabrication, microstrip arrays are attractive as feeds for reflector antenna systems. The development of a 4 x 4 microstrip array which will be used as a feed for a low cost Advanced Communications Technology Satellite (ACTS) ground terminal is described. The array feed consisting of four 2 x 2 subarrays is fed with coplanar waveguide power dividing networks. The patch radiator is designed to excite two orthogonal, linearly polarized waves at Ka-band frequencies (around 20 and 30 GHz). Test results for the developed array are presented.

Lee, Richard Q.↗

Ka-Band Dual Frequency Array Feed for a Low Cost ACTS Ground Terminal

Because of low cost and ease of fabrication, microstrip arrays are attractive as feeds for reflector antenna systems. This paper describes the development of a 4x4 microstrip array which will be used as a feed for a low cost ACTS ground terminal. The array feed consisting of four 2x2 subarrays is fed with coplanar waveguide power dividing networks. The patch radiator is designed to excite two orthogonal, linearly polarized waves at Ka-band frequencies (around 20 and 30 GHz). Test results for the developed array are presented.

Lee, Richard Q.↗

Experimental code verification results for reflector antenna distortion compensation by array feeds

Electronic compensation of reflector surface distortion using array feed with individual amplitude and phase control of the array elements is becoming increasingly attractive because of the recent advances in monolithic microwave integrated circuit (MMIC) technology. An algorithm has been developed previously using the concept of focal plane conjugate field matching in the receive mode and a computer code has been generated that predicts the proper excitation coefficients for the elements of the reflector feed array to compensate the effects of reflector surface distortion. This paper presents the results of an experimental study to verify the above compensation algorithm and in general to demonstrate the effectiveness of the array feed compensation technique.

Zaman, A. J.↗

Feed-forward control upgrade of the deep space network antennas

In order to improve the accuracy of high-rate tracking of NASA's DSN antennas, the position-loop controller has been upgraded with a feed-forward loop. Conditions for perfect and approximate tracking with the feed-forward loop are presented. The feed-forward loop improves tracking performance and preserves wind disturbance rejection properties of the previous closed-loop system.

Gawronski, W.↗

Ka-band feed arrays for spacecraft reflector antennas with limited scan capability - An overview

JPL and NASA are in the process of developing ground and spacecraft antenna systems at Ka-band frequencies for future deep space applications. The use of Ka-band (32-GHz) down communication will result in smaller ground and spacecraft antennas and associated equipment, and will provide larger bandwidths necessary for very high data rate communication and radio navigation. In this article, the use of a small phased array as a feed for a reflector antenna system with limited scan capability is addressed. Different feed and antenna configurations, as well as array architectures, are examined. Some theoretical an experimental parameters of a particular breadboard feed array developed by JPL and the University of Massachusetts are presented. Guidelines for the future direction of this effort are provided.

Jamnejad, V.↗

Detection of feed-through faults in CMOS storage elements

In testing sequential circuits, internal faults in the storage elements (SE's) are sometimes modeled as stuck-at faults in the combinational circuits surrounding the SE. The detection of some transistor-level faults that cannot be modeled as stuck-at are considered. These feed-through faults cause the cell to become either data-feed-through, which makes the cell combinational, or clock-feed-through, which causes the clock signal or its complement to appear at the output. Under such faults, the cell does not function as a memory element. Here it is shown that such faults may or may not be detected depending on delays involved. Conditions under which race-ahead occurs are identified.

Al-Assadi, Waleed K.↗