Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Extrusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Ultrasonic imaging of textured alumina

Ultrasonic images representing the bulk attenuation and velocity of a set of alumina samples were obtained by a pulse-echo contact scanning technique. The samples were taken from larger bodies that were chemically similar but were processed by extrusion or isostatic processing. The crack growth resistance and fracture toughness of the larger bodies were found to vary with processing method and test orientation. The results presented here demonstrate that differences in texture that contribute to variations in structural performance can be revealed by analytic ultrasonic techniques.

Stang, David B.↗
NASA NTRS1988

Age estimation of the Deccan Traps from the North American apparent polar wander path

It has recently been proposed that flood basalt events, such as the eruption of the Deccan Traps, have been responsible for mass extinctions. To test this hypothesis, accurate estimations of the ages and duration of these events are needed. In the case of the Deccan Traps, however, neither age nor duration of emplacement is well constrianed; measured ages range from 40 to more than 80 Myr, and estimates of duration range from less than 1 to 67 Myr. To make an independent age determination, paleomagnetic and sea-floor-spreading data are used, and the associated errors are estimated. The Deccan paleomagnetic pole is compared with the reference apparent polar wander path of North America by rotating the positions of the paleomagnetic pole for the Deccan Traps to the reference path for a range of assumed ages. Uncertainties in the apparent polar wander path, Deccan paleopole position, and errors resulting from the plate reconstruction are estimated. It is suggested that 83-70 Myr is the most likely time of extrusion of these volcanic rocks.

Stoddard, Paul R.↗
NASA NTRS1988

The tectonics of Mercury

The probable tectonic history of Mercury and the relative sequence of events are discussed on the basis of data collected by the Mariner-10 spacecraft. Results indicate that Mercury's tectonic activity was confined to its early history; its endogenic activity was principally due to a small change in the shape of its lithosphere, caused by tidal despinning, and a small change in area caused by shrinkage due to cooling. Exogenic processes, in particular the impact activity, have produced more abundant tectonic features. Many features associated with the Caloris basin are due to loading of Mercury's thick lithosphere by extrusive lavas or subsidence due to magma withdrawal. It is emphasized that tectonic features observed on Mercury yield insight into the earliest tectonic events on planets like Mars and, perhaps, the earth, where subsequent events obscured or erased the most ancient tectonic records.

Melosh, H. J.↗
NASA NTRS1990

Graphite/Thermoplastic-Pultrusion Die

Attachment to extruder produces thermoplastic-impregnated graphite tape. Consists of profile die, fiber/resin collimator, and crosshead die body. Die designed to be attached to commercially available extrusion machine capable of extruding high-performance thermoplastics. Simple attachment to commercial extruder enables developers of composites to begin experimenting with large numbers of proprietary resins, fibers, and hybrid composite structures. With device, almost any possible fiber/resin combination fabricated.

Wilson, Maywood L.↗
NASA NTRS1990

Tribological Properties Of Ceramics

Report reviews adhesion, friction, and micromechanical properties of ceramics - properties increasingly important as more ceramic materials used in bearings, seals, and gears in advanced engines and in cutting tools and extrusion dies. Report considers effects of contaminating surface films, temperature, and chemical interactions. Examines ceramics, in both monolithic and coating form, in contact with themselves, with other harder materials, and with metals.

Miyoshi, Kazuhisa↗
NASA NTRS1989

Volcanism on Venus: Large shields and major accumulations of small domes

The outer layers of the Venusian lithosphere appear to dissipate heat from the interior through mantle-driven thermal anomalies (hot spots, swells). As a result, Venus exhibits diverse forms of thin-skin tectonism and magmatic transfer to and extrusion from countless numbers of volcanic centers (e.g., shields, paterae, domes) and volcano-tectonic complexes (e.g., coronae, arachnoids). What is known about the distribution and morphologies of major Venusian shields is summarized, and the evidence for possible structural control of major accumulations as long as 5000 km of small volcanic domes is described.

Schaber, Gerald G.↗
NASA NTRS1990

Quantitative characterization of spatial distribution of particles in materials: Application to materials processing

Most engineering materials contain second phase particles or fibers which serve to reinforce the matrix phase. The effect of reinforcements on material properties is usually analyzed in terms of the average volume fraction and spacing of reinforcements, quantities which are global microstructural characteristics. However, material properties can also depend on local microstructural characteristics; for example, on how uniformly the reinforcing phase is distributed in the material. The analysis method will then be applied to a materials processing problem to discover how processing parameters can be selected to maximize redistribution of the reinforcing phase during processing. Several mathematical analysis methods could be adapted to the problem of characterizing the distribution of particles in materials. A tessellation-based method was selected. In the first phase of the investigation, a software package was written to automate the analysis. Typical results are shown. The analysis technique allows the degree to which particles are clustered together, the size and spacing of particle clusters, and the particle density in clusters to be found. The analysis methods were applied to computer-generated distributions and to a few real particle-containing materials. Methods for analyzing a nonuniform particle distribution in a material can be applied to two broad classes of materials science problems: understanding how the resulting particle distribution affects properties. The analysis method described is applied to a materials processing problem: how to select extrusion conditions to maximize the redistribution of reinforcing particles that are initially nonuniformly distributed. In addition, the tessellation-based method to analyze star distributions in spiral galaxies was adapted, illustrating the diverse types of problems to which the analysis method can be applied.

Parse, J. B.↗
NASA NTRS1989

Microstructure and tensile properties of Fe-40 at. pct Al alloys with C, Zr, Hf, and B additions

The influence of small additions of C, Zr, and Hf, alone or in combination with B, on the microstructure and tensile behavior of substoichiometric FeAl was investigated. Tensile properties were determined from 300 to 1100 K on powder which was consolidated by hot extrusion. All materials possessed some ductility at room temperature, although ternary additions generally reduced ductility compared to the binary alloy. Adding B to the C- and Zr-containing alloys changed the fracture mode from intergranular to transgranular and restored the ductility to approximately 5 percent elongation. Additions of Zr and Hf increased strength up to about 900 K. Fe6Al6Zr and Fe6Al6Hf precipitates, both with identical body-centered tetragonal structures, were identified as the principal second phase in these alloys. Strength decreased steadily as temperature increased above 700 K, as diffusion-assisted mechanisms became operative. Although all alloys had similar strengths at 1100 K, Hf additions significantly improved high-temperature ductility by suppressing cavitation.

Gaydosh, D. J.↗
NASA NTRS1990

Right-lateral shear and rotation as the explanation for strike-slip faulting in eastern Tibet

Bounds are placed here on the rate of rotation proposed by Cobbold and Davy (1988) for the major strike-slip faults in the eastern Tibetan Plateau. It is also concluded here that the image of lateral transport on such faults, known also as continental escape, extrusion, or expulsion, is an illusion, and that instead the left-lateral slip on east-striking plates in eastern Tibet is a manifestation of north-striking right-lateral simple shear. If this conclusion is correct, the east-striking left-lateral faults and the crustal blocks between them are rotating clockwise at 1-2 deg/Myr, the east-west dimension of eastern Tibet is shortening at 10-20 mm/yr, and little material is moving eastward out of India's path into Eursasia by left-lateral simple shear.

England, Philip↗
NASA NTRS1989

Fracture toughness of SiC/Al metal matrix composite

An experimental study was conducted to evaluate fracture toughness of SiC/Al metal matrix composite (MMC). The material was a 12.7 mm thick extrusion of 6061-T6 aluminum alloy with 40 v/o SiC particulates. Specimen configuration and test procedure conformed to ASTM E399 Standard for compact specimens. It was found that special procedures were necessary to obtain fatigue cracks of controlled lengths in the preparation of precracked specimens for the MMC material. Fatigue loading with both minimum and maximum loads in compression was used to start the precrack. The initial precracking would stop by self-arrest. Afterwards, the precrack could be safely extended to the desired length by additional cyclic tensile loading. Test results met practically all the E399 criteria for the calculation of plane strain fracture toughness of the material. A valid K sub IC value of the SiC/Al composite was established as K sub IC = 8.9 MPa square root of m. The threshold stress intensity under which crack would cease to grow in the material was estimated as delta K sub th = 2MPa square root of m for R = 0.09 using the fatigue precracking data. Fractographic examinations show that failure occurred by the micromechanism involved with plastic deformation although the specimens broke by brittle fracture. The effect of precracking by cyclic loading in compression on fracture toughness is included in the discussion.

Flom, Yury↗
NASA NTRS1989

Fracture of silicon carbide whisker reinforced aluminum

An attempt is made to apply standard fracture toughness testing procedures, developed for metals, to whisker reinforced metal matrix composites. Test were carried out on compact-tension, center-notched, and edge-notched specimens of silicon carbide whisker reinforced extruded 2124 aluminum plate (10 and twenty volume percent of whiskers), with the loading direction either parallel or perpendicular to the extrusion direction. None of the tests is found to give a valid fracture toughness according to the criteria of the ASTM Standard E-399.

Albritton, J. R.↗
NASA NTRS1990

Dark materials in Valles Marineris - Indications of the style of volcanism and magmatism on Mars

Computer mapping of spectral reflectance in Viking Orbiter I multispectral images is combined with photogeological interpretation and used to examine the geological significance of the dark materials in Valles Marineris, a canyon system that provides a unique view of the interior of the Martian crust. Special consideration is given to the relation of the dark materials to the past episodes of tectonism, volcanic activity, and igneous intrusion. Spectral mapping suggests that the dark floor-covering materials in the lower canyon are derived from a thick deposit composed of mafic glass, possibly an ancient Martian analogue of the lunar terra mantling deposits. Application of computer mapping techniques to probable young volcanic materials in the central troughs yields an inferred distribution of volcanic activity consistent with the interpretation of extrusion along faults near the margins of the canyon floors. The results support the hypothesis that Valles Marineris originated through tectonic extension.

Geissler, Paul E.↗
NASA NTRS1990

Effects of additives on the processing and properties of LARC-TPI polyimide

The blending of LARC-TPI polyimide with the thermotropic liquid crystal polymer designated Xydar and with four different oligomeric imide materials has facilitated the resulting resin systems' processing into films while enhancing their mechanical properties and lowering their coefficient of thermal expansion to virtually zero. Two film-formation processes have been evaluated: (1) the casting of polyamic acid films followed by thermal imidization and biaxial stretching, and (2) the blown-film melt-extrusion of fully imidized LARC-TPI polymer. The best results have been obtained through the use of Xydar as a processing aid at levels in the 10-30 percent range.

Elandjian, L.↗
NASA NTRS1991

Microstructural evolution during aging of an Al-Cu-Li-Ag-Mg-Zr alloy

Alloys in the Al-Cu-Li Ag-Mg subsystem were developed that exhibit desirable combinations of strength and ductility. These Weldalite (trademark) alloys, are unique for Al-Cu-Li alloys in that with or without a prior cold stretching operation, they obtain excellent strength-ductility combinations upon natural and artificial aging. This is significant because it enables complex, near-net shape products such as forgings and super plastically formed parts to be heat treated to ultra-high strengths. On the other hand, commercial extrusions, rolled plates and sheets of other Al-Cu-Li alloys are typically subjected to a cold stretching operation before artificial aging to the highest strength tempers to introduce dislocations that provide low-energy nucleation sites for strengthening precipitates such as the T(sub 1) phase. The variation in yield strength (YS) with Li content in the near-peak aged condition for these Weldalite (trademark) alloys and the associated microstructures were examined, and the results are discussed.

Kumar, K. S.↗
NASA NTRS1991

Weldability of Weldalite (tm) 049 with and without TiB2 reinforcement

The effects are assessed of TiB2 reinforcement and parent alloy Li content on the weldability of Weldalite (tm) 049 type alloys. Welding trials were performed using either AC or DC polarity gas tungsten arc (GTA) welding according to described procedures. The welding was performed under conditions of high restraint on 5 cm (2 in) wide x 25.4 cm (10 in) long plates machined from the 0.952 cm (0.375 in) extruded bar parallel to the extrusion direction. A 37.5 deg bevel was machined on the center edge of the extruded bar. Cut rod filler wire was machined from three alloys, and one commercially available 2319 filler wire was also used. The preliminary assessment of the weldability revealed no propensity for hot cracking under conditions of high restraint. This result is significant, because hot cracking has been reported for all other leading aluminum lithium alloys welded with certain conventional filler alloys. The strengths for Weldalite parent welded with parent filler obtained were higher than those for alloys used in launch systems, such as 2219 and 2014 welded with 2319 and 4043 fillers, respectively. Even higher values were obtained by variable polarity plasma arc welding (e.g., 54 ksi (372 MPa) mean tensile strength).

Source record↗
NASA NTRS1991

Effect of Li level, artificial aging, and TiB2 reinforcement on the fracture toughness of Weldalite (tm) 049-type alloys

Plane strain fracture toughness (K sub IC) was evaluated for Weldalite (tm) 049 with and without TiB2 reinforcement. For the nonreinforced variant, changes in toughness were measured for various aging conditions and lithium levels. Toughness testing was carried out on fatigue precracked compact tension (CT) specimens at 24 C, as per ASTM standard E-399. Toughness was measured as a function of aging time at 160 C for the two Weldalite 049(1.3) heats. The composition of these heats differed only in that 0.03 wt pct. Ti was added to one as an additional grain refiner. Both heats showed a decrease in toughness with increasing aging time, although toughness values for one were significantly higher than for the other. This greater toughness may be due to a subtle change in the grain size resulting for the presence of Ti or, alternatively, to differences in texture or substructure formed during extrusion.

Source record↗
NASA NTRS1990

Cyanobacteria in CELSS: Growth strategies for nutritional variation and nitrogen cycling

Cyanobacteria (blue-green algae) are versatile organisms which are capable of adjusting their cellular levels of carbohydrate, protein, and lipid in response to changes in the environment. Under stress conditions there is an imbalance between nitrogen metabolism and carbohydrate/lipid synthesis. The lesion in nitrogen assimilation is at the level of transport: the stress condition diverts energy from the active accumulation of nitrate to the extrusion of salt, and probably inhibits a cold-labile ATP'ace in the case of cold shock. Both situations affect the bioenergetic status of the cell such that the nitrogenous precursors for protein synthesis are depleted. Dispite the inhibition of protein synthesis and growth, photosynthetic reductant generation is relatively unaffected. The high O2 reductant would normally lead to photo-oxidative damage of cellular components; however, the organism copes by channeling the 'excess' reductant into carbon storage products. The increase in glycogen (28 to 35 percent dry weight increase) and the elongation of lipid fatty acid side chains (2 to 5 percent dry weight increase) at the expense of protein synthesis (25 to 34 percent dry weight decrease) results in carbohydrate, lipid and protein ratios that are closer to those required in the human diet. In addition, the selection of nitrogen fixing mutants which excrete ammonium ions present an opportunity to tailor these micro-organisms to meet the specific need for a sub-system to reverse potential loss of fixed nitrogen material.

Fry, I. V.↗
NASA NTRS1990

The microstructure and properties of rapidly solidified, dispersion-strengthened NiAl

An advanced rapid solidification technology for processing reactive and refractory alloys, utilized to produce large quantities of melt-spun filaments of NiAl, is presented. The melt-spun filaments are pulverized to fine particle sizes, and subsequently consolidated by hot extrusion or hot isostatic pressing. Rapid solidification process gives rise to very fine-grained microstructures. However, exposure to elevated temperature during hot consolidation leads to grain growth. Alloying agents such as borides, carbides, and tungsten can pin the grain boundaries and retard the grain growth. Various alloy compositions are investigated. The eventual goal is to utilize the hot-extruded and forged stock to grow single-crystal NiAl blades for advanced gas-turbine engine applications. Single-crystal NiAl, containing a uniform dispersion of carbide strengthening precipitates, is expected to lead to highly creep-resistant turbine blades, and is of considerable interest to the aerospace propulsion industry.

Jha, S. C.↗