Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Event shapes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Oscillation Baselining and Analysis Tool

PNNL developed a new tool for oscillation analysis and baselining. This tool has been developed under a new DOE Grid Modernization Laboratory Consortium (GMLC) Project (GM0072 - “Suite of open-source applications and models for advanced synchrophasor analysis”) and it is based on the open platform for PMU analysis. The Oscillation Baselining and Analysis Tool (OBAT) performs the oscillation analysis and identifies modes of oscillations (frequency, damping, energy, and shape). The tool also does oscillation event baselining (fining correlation between oscillations characteristics and system operating conditions).

Source record↗

Plastome evolution in annual Brachypodium species reveals widespread heteroplasmy and chloroplast capture, lineage-specific codon usage bias, and low positive selection

Comparative genomics and plastome phylogenomics have advanced significantly in recent years, highlighting the diversity, possible admixture, and non-neutral evolution of the predominantly considered non-recombinant chloroplast genomes in angiosperms. The grass genus Brachypodium serves as a powerful model for studying evolutionary processes in monocots. We analyzed 287 plastomes across the native circum-Mediterranean range of the three annual Brachypodium species ( B. distachyon, B. stacei, B. hybridum ), focusing on their structural variation, selection patterns and phylogenomic relationships. Our analyses confirmed the differentiation of the S and D plastomes, inherited respectively from the diploid progenitor species B. stacei and B. distachyon . We identified novel structural rearrangements and indels, and unique repeat motifs, along with widespread heteroplasmy, particularly in ancestral B. hybridum -D plastotypes. SNP diversity varied among plastotypes, reflecting population dynamics and evolutionary histories, with B. hybridum -D plastotypes showing the highest normalized diversity and B. hybridum -S the lowest. Positive selection was detected in 29 plastid genes by Tajima’s neutrality test, and in nine genes by site and branch-site evolutionary models, including matK, ndhF, rbcL, and rpoC2. Phylogenomic analyses revealed well-supported clades corresponding to the S and D plastome lineages, with frequent chloroplast capture events and long-distance dispersals shaping their evolutionary trajectories.

allopolyploidy↗

Characterizing the hadronization of parton showers using the HOMER method

We update the HOMER method, a technique to solve a restricted version of the inverse problem of hadronization – extracting the Lund string fragmentation function f(z) from data using only observable information. Here, we demonstrate its utility by extracting f(z) from synthetic Pythia simulations using high-level observables constructed on an event-by-event basis, such as multiplicities and shape variables. Four cases of increasing complexity are considered, corresponding to e + e − collisions at a center-of-mass energy of 90 ≥ v producing either a string stretched between a $q$ and $\bar{q}$ containing no gluons; the same string containing one gluon g with fixed kinematics; the same but the gluon has varying kinematics; and the most realistic case, strings with an unrestricted number of gluons that is the end-result of a parton shower. We demonstrate the extraction of f(z) in each case, with the result of only a relatively modest degradation in performance of the HOMER method with the increased complexity of the string system.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Technical Issues in the Comprehensive Nuclear Test Ban Treaty (CTBT) Ratification Debate: A 20 Year Retrospective

Two decades after the U.S. Senate declined in 1999 to give its consent to ratification of the Comprehensive Nuclear Test Ban Treaty (CTBT), the treaty remains in legal and political limbo. Legally, the treaty cannot enter into force without U.S. ratification. However, the Senate’s rejection does not strip the treaty of its force as an element of customary international law or alter the will of other signatories to see it enter into force. Politically, the debate over the virtues and flaws of the treaty remains as strong as ever, with some CTBT advocates pushing energetically for U.S. re-review while some opponents seek ways to “un-sign” the treaty. Meanwhile, despite the Senate’s rejection of the treaty, the United States acts in a manner consistent with its main obligations by maintaining a moratorium on explosive nuclear testing and providing financial support (as well as technical expertise) to the CTBT Organization (CTBTO)—in particular the CTBTO’s International Monitoring System (IMS). The CTBT may well remain in such limbo for a long time to come, unless some catalytic event comes along to re-shape national perceptions and priorities, one way or the other. The treaty’s future, whatever it might be, will be determined in part by how much perspectives might have changed in light of interim developments. Our purpose is to shed light on some of those developments and to assess their relevance. The 1999 ratification debate addressed a large number of issues. Rejection was driven by various policy and technical judgments. The purpose of this paper is to re-examine those technical judgments in light of what has been learned over the following two decades. On some technical matters, there was explicit recognition of extant uncertainties, as well as a conviction and hope that time would dispel them. To be doubly clear, our purpose is not to recommend a way forward on CTBT ratification. The policy judgments of 1999 and 2020 are beyond the scope of this paper. This technical re-examination proceeds as follows. It begins with a short background section to introduce the key technical matters in discussion in the U.S. ratification process. Then it moves systematically through each of those topics with a review of relevant background information, a discussion of key points in debate, an analysis of subsequent experience, and a current assessment. The historical analysis draws on many sources including the primary documents of the Congressional debate, the official article-by-article interpretation by the Department of State, and the statements of key players in the process. We also relied on key technical reports and publications by subject matter experts that have addressed in more detail many of the issues in our focus. These sources include the 2002 and 2012 reports of the National Academy of Sciences as well as publications by senior technical staff of Lawrence Livermore National Laboratory (LLNL) who were actively involved in the ratification debate, including then-Laboratory Director Bruce Tarter. We also conducted several interviews with government officials from the 1990s, past laboratory directors, and other members of the scientific community. But, except where individuals are specifically cited by name, the judgments offered here are our own and should not be attributed to any other individual or to LLNL as such.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Structure of density fluctuations near the sun deduced from Pioneer-6 spectral broadening measurements

Spectral broadening of monochromatic radio waves by density fluctuations near the sun is analyzed using the parabolic equation method. Application of the analysis to the 1968 Pioneer-6 spectral broadening observations yields indirect measurements of the density spectrum within 14 solar radii of the sun. For spatial wavenumbers of at least 0.0084 inverse km, the three-dimensional density spectrum is found to be close to the Kolmogorov spectrum (power law with spectral index of 11/3) and is consistent with interplanetary-scintillation and in situ spacecraft measurements farther from the sun. The magnitude of the density spectrum increases, but its shape remains the same during 'solar events' marked by increases in bandwidth.

Woo, R.↗

A possible origin for the grooves of Phobos

A hypothesis that the age and distribution of grooves on the surface of Phobos may be explained by a hybrid origin due to varying tidal stresses induced after a large impact altered the satellite's rotation rate is presented. The theory that these grooves are surface manifestations of internal fractures induced by the decay of Phobos orbit is ruled out because this mechanism would require the grooves to be extremely young features, but their implied age is greater than 10 to the 9th power yr. The location and relationship of grooves to the largest crater, Stickney, indicate that they are related to the Stickney impact, but were formed shortly after that event with orientations determined by the shape of Phobos. If the impact destroyed the condition of synchronous rotation, the changing orientation of Phobos in the gravitational field of Mars would subject its interior to stresses, producing the systems of grooves.

Weidenschilling, S. J.↗

Aspect dependence and frequency spectrum of electrical discharges on the P78-2 (SCATHA) satellite

The satellite charging at high altitudes (SCATHA) P78-2 satellite payload includes a charging electrical effects analyzer (CEEA) which measures the characteristics of electrical discharges in both the frequency and time domain. Pulses are detected in response to commands during electron and ion beam operations and during natural discharge events. The pulse analyzer measures the shape of pulses on four sensors and is the primary CEEA diagnostic for the natural discharges. Only five discharges were found in the data at a time when the pulse analyzer was in mode with sufficient time resolution to resolve the frequency components in the waveform.

Koons, H. C.↗

High spectral resolution measurements of a solar flare hard X-ray burst

Observations are reported of an intense solar flare hard X-ray burst on June 27, 1980, made with a balloon-borne array of liquid nitrogen-cooled Ge detector which provided unprecedented spectral resolution (no more than 1 keV FWHM). The hard X-ray spectra throughout the impulsive phase burst fitted well to a double power-law form, and emission from an isothermal 0.1-1 billion K plasma can be specifically excluded. The temporal variations of the spectrum indicate that the hard X-ray burst is made up of two superposed components: individual spikes lasting about 3-15 sec, which have a hard spectrum and a break energy of 30-65 keV; and a slowly varying component characterized by a soft spectrum with a constant low-energy slope and a break energy which increases from 25 kev to at least 100 keV through the event. The double power-law shape indicates that DC electric field acceleration, similar to that occurring in the earth's auroral zone, may be the source of the energetic electrons which produce the hard X-ray emission.

Lin, R. P.↗

Disconnection of open coronal magnetic structures

We have examined the Solar Maximum Mission coronagraph/polarimeter observations for evidence of magnetic disconnection of previously open magnetic structures and a number of likely examples have been found. Probable coronal disconnections typically appear as pinching off of helmet streamers followed by the release and outward acceleration of a large U or V-shaped structure. The observed sequence of events is consistent with reconnection across the heliospheric current sheet between previously open magnetic field regions, and the creation of a detached magnetic structure which is open to interplanetary space at both ends. Sunward of the reconnection point, coronal disconnection events would return previously open magnetic flux to the Sun as closed field arches. Here we (1) describe one clear disconnection event (1 June 1989); (2) examine the results of a limited survey of disconnection events; and (3) discuss the potential importance of coronal disconnections for maintaining flux in interplanetary space.

Mccomas, D. J.↗

Early animal evolution: emerging views from comparative biology and geology

The Cambrian appearance of fossils representing diverse phyla has long inspired hypotheses about possible genetic or environmental catalysts of early animal evolution. Only recently, however, have data begun to emerge that can resolve the sequence of genetic and morphological innovations, environmental events, and ecological interactions that collectively shaped Cambrian evolution. Assembly of the modern genetic tool kit for development and the initial divergence of major animal clades occurred during the Proterozoic Eon. Crown group morphologies diversified in the Cambrian through changes in the genetic regulatory networks that organize animal ontogeny. Cambrian radiation may have been triggered by environmental perturbation near the Proterozoic-Cambrian boundary and subsequently amplified by ecological interactions within reorganized ecosystems.

Non-NASA Center↗

Challenges of CPAS Flight Testing

The Crew Exploration Vehicle Parachute Assembly System (CPAS) is being designed to land the Orion Crew Module (CM) at a safe rate of descent at splashdown via a series of Drogue, Pilot, and Main parachutes. Because Orion is considerably larger and heavier than Apollo, many of the flight test techniques developed during the Apollo program must be modified. The Apollo program had a dedicated C-133 aircraft, which was modified to allow a simple airdrop of "boilerplate" flight test vehicles. However, the CPAS program must use either commercial or military assets with minimal modifications to airframes or procedures. Conceptual envelopes from 2-Degree Of Freedom trajectories are presented for several existing and novel architectures. Ideally, the technique would deliver a representative capsule shape to the desired altitude and dynamic pressure at test initiation. However, compromises must be made on the characteristics of trajectories or the fidelity of test articles to production hardware. Most of the tests to date have used traditional pallet and weight tub or missile-shaped test vehicles. New test vehicles are being designed to better incorporate Orion structural components and deploy parachutes in a more representative fashion. The first attempt to test a capsule-shaped vehicle failed due to unexpected events while setting up the test condition through a series of complex procedures. In order to avoid the loss of another expensive test article which will delay the program, simpler deployment methods are being examined and more positive control of the vehicle will be maintained. Existing challenges include interfacing with parent aircraft, separating test vehicles, achieving test conditions, and landing within limited test ranges. All these challenges must be met within cost and schedule limits.

Ray, Eric S.↗

Buckling Testing of a Subscale Composite Cylinder

A subscale solid laminate composite cylinder with a 31.5-in. diameter, a 48.2-in. length, and a [23/0/-23]4S layup was designated NDL-1 and was designed to fail in buckling after a series of subcritical tests. NDL-1 was experimentally loaded in axial compression until buckling at 466.3 kips. Visual inspection of the test article after the test revealed that a shallow area of delamination occurred near the buckling initiation site. After a successful first buckling test, there was an opportunity to test NDL-1 in axial compression to failure a second time despite that the test article was not designed or analyzed for multiple buckling tests. During the second test to failure, NDL-1 reached a peak load of 390.4 kips, 16.3% lower than the first test. Buckling did not initiate in the same location during the second test to failure as the first test to failure. The second buckling event caused a large V-shaped crack that penetrated through the thickness of the barrel. Though buckling initiated at different locations, a similar radial deformation pattern was present just prior to buckling during the both tests. In the end, NDL-1 maintained a significant amount of its structural integrity and a similar prebuckling radial displacement pattern, even after the first buckling test.

Test↗

Impulsive Solar Energetic Particle Events: Extreme-Ultraviolet Waves and Jets

Impulsive solar energetic particle (ISEP) events show peculiar elemental composition, with enhanced 3 He and heavy-ion abundances, markedly different from our Solar System composition. Furthermore, the events are characterized by a wide variety of energy spectral shapes from power laws to rounded spectra toward the low energies. Solar sources of the events have been firmly associated with coronal jets. Surprisingly, new observations have shown that events are often accompanied by so-called extremeultraviolet (EUV) coronal waves–a large-scale phenomenon compared to jets. This paper outlines the current understanding of the linkage of EUV waves with jets and energetic ions in ISEP events.

solar energetic particles↗

Pulse Shaping in 1D Elastic Waveguides for Shock Testing

Mechanical shock events experienced by electronics systems can be reproduced in the laboratory using Hopkinson bar tests. In these tests a projectile strikes an bar, creating a pulse which travels through the bar into the system. The quality of these tests depends on the closeness of the shape of the incident pulse to the shape specified for the test. This paper introduces a new way to control the shape of the incoming pulse, through the use of elastic metamaterial concepts. Two dispersion-modifying material concepts, phononic crystals, and local resonators, are examined for their wave shaping capabilities in 1D elastic waveguides. They are then evaluated using a transfer matrix method to determine the output wave shape in the time domain. The concepts are then optimized for various pulse shapes, showing that they are most effective when they are tuned to introduce dispersion near the fundamental frequency of the incident wave.

DeLima, Washington↗

An Impact Genesis for Loki Patera?

What happens when a large impact event takes place on a satellite with a thin crust and lithosphere? In the early Solar System impact cratering and volcanism were the dominate processes shaping the surfaces of the terrestrial planets. Impact events may have triggered additional volcanism by uplifting partially molten mantle material to the surface, where it melts due to pressure release. Subsequently, the shattered crust may have provided pathways for magma to reach the surface creating a longer term hot spot. As the crusts of the terrestrial planets thickened, the ability of impacts to trigger volcanism diminished [1]. However, the highly-volcanic jovian satellite Io is located in a "high-impact" area of the Solar System [2], a victim of material attracted by Jupiter s gravitational field. In 1994 huge impacts were observed when fragments of comet Shoemaker- Levy 9 impacted Jupiter. The large icy satellites of Jupiter (Europa, Ganymede and Callisto) are pockmarked with many impact craters. Yet no impact features have been found on Io [3]. This is because of rapid resurfacing of Io due to volcanism, estimated at approx.1 cm/year [4] which over short geological time erases evidence of impacts. Io, however, has a lithosphere over a molten or partially-molten mantle [e.g., 5], and the effects of a sufficiently large impact may extend far beyond the evolution of the impact crater alone. At least one example of impact-triggered volcanism may exist in the Solar System today: the Loki Patera complex on Io.

Thorsos, I. E.↗

Project report for year 1

In the first year of the project, we developed a fire event tracking system using active fire detections recorded by the Visible Infrared Imaging Radiometer Suite (VIIRS). We employed this algorithm to track all large fires that occurred in California from 2013 to 2020, and created a retrospective Fire Event Data Suite (FEDS) that contains the vector shapes of fire perimeters, active fire fronts, and the locations and fire radiative powers for each fire pixel at 12-hour temporal resolution for each fire event. Using the 2020 Creek Fire as a test bed, we also delineated hourly fire perimeters by combining the FEDS data with the hourly rates of spread derived from Geostationary Operational Environmental Satellite (GOES) Advanced Baseline Imager (ABI) fire data. This dataset will form the basis of the near-real-time hourly fire emissions product that we plan to develop at years 2 and 3 of the project.

54 ENVIRONMENTAL SCIENCES↗

IMPLICATIONS OF TEMPORAL DEVELOPMENT OF LOCALIZED ULTRAVIOLET AND HARD X-RAY EMISSION FOR LARGE SOLAR FLARES

Ultraviolet and hard X-ray (HXR) emissions in solar flares provide observational signatures of the interaction of flare-accelerated particles with the chromospheric plasma. Earlier studies have shown clear evidence of temporal and spatial relationships between UV and HXR emission, suggesting a common physical origin. However, more recent spatially resolved case studies suggest significant variations in the spatial distributions of the emission signatures, implying that the large-scale magnetic topology of the flaring region must play a crucial role in the spatial and temporal development of the localized UV and HXR emission. We present here an analysis of spatially resolved HXR emission and localized UV emission sources from 11 M and X class flares with observations from RHESSI and high-cadence 1600 A observations from TRACE. Within each flare we address the overall temporal development of individual UV sources and relate them to associated impulsive bursts within the HXR flare profile. We find, for these large flares, that in the initial impulsive bursts of flare activity, the majority of the temporally correlated emission evolves in a series of localized co-spatial sources along the UV ribbons consistent with previous two-dimensional reconnection pictures. However, observations of impulses late in flares, show significant departures from the traditional co-spatial/co-temporal picture. The new results include extended UV ribbons with no corresponding HXR emission and marked spatial separations between temporally correlated sources of UV and HXR emission. In seven of the multi-burst events, we observe the development of independent sets of UV and HXR sources corresponding to the individual impulses seen in the temporal profile. The observed separations and the spatial development of co-temporal emission in multi-burst events emphasize the importance of a complex and time varying magnetic topology in shaping the observed emission distributions in both wavelengths. In four of the events, we observe late developing UV sources which show no relationship with the HXR emission. In these events, the emission sources show a strong relationship with lower energy, more spatially extended X-ray emission believed to be of thermal origin. This suggests that, in the later phase of these complex flares, emission from thermal processes comes to dominate non-thermal processes in the production of the UV emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparing EGF Methods for Estimating Corner Frequency and Stress Drop from P-wave Spectra

Empirical Green's functions (EGF) are widely applied to correct earthquake spectra for attenuation and other path effects in order to estimate corner frequencies and stress drops, but these source parameter estimates often exhibit poor agreement between different studies. We investigate this issue by analyzing a compact cluster of over 3000 aftershocks of the 1992 Landers earthquake. We apply and compare two different analysis and modeling methods: (1) the spectral decomposition and global EGF fitting approach, and (2) a more traditional EGF method of modeling spectral ratios. We find that spectral decomposition yields event terms that are consistent with stacks of spectral ratios for individual events, but source-parameter estimates nonetheless vary between the methods. The main source of differences comes from the modeling approach used to estimate the EGF. The global EGF-fitting approach suffers from parameter tradeoffs among the absolute stress drop, the stress-drop scaling with moment, and the high-frequency falloff rate, but has the advantage that the relative spectral shapes and stress drops among the different events in the cluster are well-resolved even if their absolute levels are not. The spectral-ratio approach solves for a different EGF for each target event without imposing any constraint on the corner frequency, f c , of the smaller events, and so can produce biased results for target-event f c . Placing constraints on the small-event f c improves the performance of the spectral-ratio method and allows the two methods to yield very similar results.

58 GEOSCIENCES↗