Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Elevation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

The elevation of Olympus Mons from limb photography

Using a novel photogrammetric technique, the relative elevations of a set of control points on the Martian volcano Olympus Mons (Nix Olympica) have been measured from Mariner 9 limb pictures that include the volcano in the foreground. The summit of Olympus Mons is found to be 22 plus or minus 1 km above the mean level of the surrounding plain by correlating the elevation results with previously reported planet radii at nearby occultation points. Vertical elevation differences as great as 5 km were measured between close points on the basal scarp.

Whitehead, A. B.↗

Estimation of surface temperature variations due to changes in sky and solar flux with elevation

The magnitude of elevation effects due to changes in solar and sky fluxes, on interpretation of single thermal images and composite products such as temperature difference and thermal inertia, are examined. Simple expressions are derived for the diurnal behavior of the two parameters, by fitting field observations in one tropic (Hawaii) and two semi-arid climates (Wyoming and Colorado) (Hummer-Miller, 1981). It is shown that flux variations with elevation can cause changes in the mean diurnal temperature gradient from -4 to -14 degrees C/km, evaluated at 2000 m. Changes in the temperature-difference gradient of 1 to 2 degrees C/km are also produced which is equivalent to an effective thermal-inertia gradient of 100 W s(exp 1/2)/sq m-K-km. An example is presented showing an elevation effect of 12 degrees C on the day and night thermal scenes of a test site in Arizona.

Hummer-Miller, S.↗

Saturn's rings - Infrared brightness variation with solar elevation

The main subject of the discussed investigation is the infrared brightness variation of the A, B, and C rings, as a function of solar elevation. Existing models for the B ring are not entirely satisfactory. A description is presented of a model applicable to all three rings. This model and other existing models are compared with the available data. Particular attention is given to the 20-micrometer observations of Saturn's rings. It is found that the brightness variation of the A and B rings with solar elevation angle can be well modeled by an optically thick monolayer of particles, or equivalently, a flat sheet, emitting on one side only. This points to a temperature contrast between the two sides of the ring plane. The infrared brightness of the C ring increases as the solar elevation angle with respect to the ring plane decreases.

Froidevaux, L.↗

Advanced composite elevator for Boeing 727 aircraft

Detail design activities are reported for a program to develop an advanced composites elevator for the Boeing 727 commercial transport. Design activities include discussion of the full scale ground test and flight test activities, the ancillary test programs, sustaining efforts, weight status, and the production status. Prior to flight testing of the advanced composites elevator, ground, flight flutter, and stability and control test plans were reviewed and approved by the FAA. Both the ground test and the flight test were conducted according to the approved plan, and were witnessed by the FAA. Three and one half shipsets have now been fabricated without any significant difficulty being encountered. Two elevator system shipsets were weighed, and results validated the 26% predicted weight reduction. The program is on schedule.

Source record↗

Surface elevation contours of Greenland and Antarctic ice sheets

Preliminary results from Seasat radar altimetry over Antarctica north of 72 deg S and Greenland south of 72 deg N are presented. Surface elevations of the ice sheets, obtained from computer retracking of the radar altimeter waveforms, are contoured at 50-m intervals for Greenland and at 100-m intervals for Antarctica. Elevation differences at orbital crossover points are analyzed to obtain a precision of 1.9 m; this figure is partly determined by radial errors of approximately 1.0 m in orbital determination and partly by noise due to ice surface irregularities. Adjustment of the radial components of the orbits to minimize the differences in elevations at crossovers over a small, relatively flat region reduces the rms difference to 0.25 m, which is indicative of the optimum precision obtainable over the ice sheets. However, the precision degrades as the slope of the surface or amplitude of the undulations increases, yielding an overall precision of + or - 1.6 m.

Zwally, H. J.↗

Relative Elevation Determination from LANDSAT Imagery

In LANDSAT imagery, spectral and spatial information can be used to detect the drainage network as well as the relative elevation model in mountainous terrain. To do this, the mixed information of material reflectance and topographic modulation in the original LANDSAT imagery must be first separated. From the material reflectance information, big visible rivers can be detected. From the topographic modulation information, ridges and valleys can be detected and assigned relative elevations. Finally, a relative elevation model can be generated by interpolating values for nonridge and nonvalley pixels.

Haralick, R. M.↗

A Description of the 64-meter Antenna Elevation Drive Gears and Their Strange Wear

The Deep Space Station (DSS) 64-m antenna elevation axis drive is executed by torquing two bull gears, concentric to the elevation axis, with the output pinions of four gear boxes. These gear boxes have functioned well during the 18 and 11 years, respectively, that the DSS 14, and the DSS 43 and DSS 63 antennas have been in service. A strange wear pattern gradually developed on the bull gears and driving pinions of all three antennas. These patterns were well developed after 8 years and apparently are intensifying in all instances. The elevation drive gears are described and their wear is compared to the wear of other antenna drive gears. The comparison is perplexing and satisfying explanations have not yet been made.

Mcginness, H. D.↗

Using the solar elevation angle and radiance conversion to normalize forest spectral signatures

A number of spectral signals associated with forest cover were selected in order to test the usefulness of adjustments to Landsat MSS digital count values. The signatures were taken from 26 independent regional land cover inventories in the northeastern US. A regression analysis was conducted which revealed a significant relationship between digital count values and variation in the solar elevation angles in MSS bands four, six, and seven for deciduous forests and in all MSS bands for conifers. When signatures were adjusted for solar elevation angles and MSS sensor calibration differences, the dependence on solar elevation angle was reduced. The adjustments also significantly reduced the variance with Level II forest categories among scenes.

Middleton, E. M.↗

Tethered elevator: A unique opportunity for space processing

The latest fluid dynamic and material science experiments in the microgravity environment have emphasized the importance of the residual gravity level and of the g-jitter on fluid physics phenomena. The tethered elevator presents the possibility of providing variable g-levels (both steady and g-jitter) around a very low steady g-level (that can be realized when the elevator is near the center of mass of the space station-tether complex). When positioning a variable periodic oscillation to the payload a clean g-jitter disturbance can be obtained that would not be otherwise obtainable by other systems. These two possibilities make the elevator a facility to help resolve a number of still open questions that are preventing wider utilization of the space environment in the microgravity area.

Monti, R.↗

The laser elevator - Momentum transfer using an optical resonator

In a conventional laser lightsail system the payload is propelled by the momentum imparted to it by the reflection of a laser beam without the use of any propellant. Because of the unfavorable relationship between energy and momentum in a light beam, these systems are very inefficient. The efficiency can be greatly improved, in principle, if the photons that impact the payload mirror are returned to the source and then redirected back toward the payload again. This system, which recirculates the laser beam, is defined as the 'laser elevator'. The gain of the laser elevator over conventional lightsails depends on the number of times the beam is recycled which is limited by the reflectance of the mirrors used, any losses in the transmission of the beam, and diffraction. Due to the increase pathlength of the folded beam, diffraction losses occur at smaller separations of the payload and the source mirror than for conventional lightsail system. The laser elevator has potential applications in launching to low earth orbit, orbital transfer, and rapid interplanetary delivery of small payloads.

Meyer, Thomas R.↗

The emittance of space radiator materials measured at elevated temperatures

The spectral emittances of textured space radiator materials between 1.7 and 14.7 micrometer have been evaluated at room temperature and elevated temperature (630 C) in air. Heating in air caused a permanent increase in spectral emittance for all materials tested: HCl/ion beam textured 304 stainless steel, untextured Ti (6 percent Al, 4 percent V), and sandblasted Ti (6 percent Al, 4 percent V). Changes in the surface chemistry and/or surface morphology of these materials were also observed. Elevated temperature spectral emittance was measured in an argon atmosphere and compared to the measurements in air. Similarity between the room temperature and elevated temperature spectral emittance measurements was also investigated, and limited agreement was found.

Mirtich, Michael J.↗

Static tensile and tensile creep testing of five ceramic fibers at elevated temperatures

Static tensile and tensile creep testing of five ceramic fibers at elevated temperature was performed. J.P. Stevens, Co., Astroquartz 9288 glass fiber, Nippon Carbon, Ltd., (Dow Corning) Nicalon NLM-102 silicon carbide fiber, and 3M Company Nextel 312, 380, and 480 alumina/silica/boria fibers were supplied in unsized tows. Single fibers were separated from the tows and tested in static tension and tensile creep. Elevated test temperatures ranged from 400 to 1300 C and varied for each fiber. Room temperature static tension was also performed. Computer software was written to reduce all single fiber test data into engineering constants using ASTM Standard Test Method D3379-75 as a reference. A high temperature furnace was designed and built to perform the single fiber elevated temperature testing up to 1300 C. A computerized single fiber creep apparatus was designed and constructed to perform four fiber creep tests simultaneously at temperatures up to 1300 C. Computer software was written to acquire and reduce all creep data.

Zimmerman, Richard S.↗

Static tensile and tensile creep testing of five ceramic fibers at elevated temperatures

Static tensile and tensile creep testing of five ceramic fibers at elevated temperature was performed. J.P. Stevens, Co., Astroquartz 9288 glass fiber; Nippon Carbon, Ltd., (Dow Corning) nicalon NLM-102 silicon carbide fiber; and 3M Company Nextel 312, 380, and 480 alumina/silica/boria fibers were supplied in unsized tows. Single fibers were separated from the tows and tested in static tension and tensile creep. Elevated test temperatures ranged from 400 C to 1300 C and varied for each fiber. Room temperature static tension was also performed. Computer software was written to reduce all single fiber test data into engineering constants using ASTM Standard Test Method D3379-75 as a reference. A high temperature furnace was designed and built to perform the single fiber elevated temperature testing up to 1300 C. A computerized single fiber creep apparatus was designed and constructed to perform four fiber creep tests simultaneously at temperatures up to 1300 C. Computer software was written to acquire and reduce all creep data.

Zimmerman, Richard S.↗

Static tensile and tensile creep testing of four boron nitride coated ceramic fibers at elevated temperatures

Six types of uncoated ceramic fibers were static tensile and tensile creep tested at various elevated temperatures. Three types of boron nitride coated fibers were also tested. Room temperature static tensile tests were initially performed on all fibers, at gage lengths of 1, 2, and 4 inches, to determine the magnitude of end effects from the gripping system used. Tests at one elevated temperature, at gage lengths of 8 and 10 inches, were also conducted, to determine end effects at elevated temperatures. Fiber cross sectional shapes and areas were determined using scanning electron microscopy. Creep testing was typically performed for 4 hours, in an air atmosphere.

Coguill, Scott L.↗

Elevated temperature crack growth in aluminum alloys: Tensile deformation of 2618 and FVS0812 aluminum alloys

Understanding the damage tolerance of aluminum alloys at elevated temperatures is essential for safe applications of advanced materials. The objective of this project is to investigate the time dependent subcritical cracking behavior of powder metallurgy FVS0812 and ingot metallurgy 2618 aluminum alloys at elevated temperatures. The fracture mechanics approach was applied. Sidegrooved compact tension specimens were tested at 175, 250, and 316 C under constant load. Subcritical crack growth occurred in each alloy at applied stress intensity levels (K) of between about 14 and 25 MPa/m, well below K (sub IC). Measured load, crack opening displacement and displacement rate, and crack length and growth rate (da/dt) were analyzed with several continuum fracture parameters including, the C-integral, C (sub t), and K. Elevated temperature growth rate data suggest that K is a controlling parameter during time dependent cracking. For FVS0812, da/dt is highest at 175 C when rates are expressed as a function of K. While crack growth rate is not controlled by C (sub t) at 175 C, da/dt appears to better correlate with C (sub t) at higher temperatures. Creep brittle cracking at intermediate temperatures, and perhaps related to strain aging, is augmented by time dependent transient creep plasticity at higher temperatures. The C (sub t) analysis is, however, complicated by the necessity to measure small differences in the elastic crack growth and creep contributions to the crack opening displacement rate. A microstructural study indicates that 2618 and FVS0812 are likely to be creep brittle materials, consistent with the results obtained from the fracture mechanics study. Time dependent crack growth of 2618 at 175 C is characterized by mixed transgranular and intergranular fracture. Delamination along the ribbon powder particle boundaries occurs in FVS0812 at all temperatures. The fracture mode of FVS0812 changes with temperature. At 175 C, it is characterized as dimpled rupture, and at 316 C as mixed matrix superplastic rupture and matrix-dipersoid debonding.

Leng, Yang↗

Achievable space elevators for space transportation and starship acceleration

Space elevator concepts for low-cost space launches are reviewed. Previous concepts suffered from requirements for ultra-high-strength materials, dynamically unstable systems, or from danger of collision with space debris. The use of magnetic grain streams solves these problems. Magnetic grain streams can support short space elevators for lifting payloads cheaply into Earth orbit, overcoming the material strength problem in building space elevators. Alternatively, the stream could support an international spaceport circling the Earth daily tens of miles above the equator, accessible to advanced aircraft. Mars could be equipped with a similar grain stream, using material from its moons Phobos and Deimos. Grain-stream arcs about the sun could be used for fast launches to the outer planets and for accelerating starships to near lightspeed for interstellar reconnaisance. Grain streams are essentially impervious to collisions, and could reduce the cost of space transportation by an order of magnitude.

Pearson, Jerome↗

Appraisal of digital terrain elevation data for low-altitude flight

The use of terrain elevation databases in advanced guidance and navigation systems has greatly expanded. However, the limitations and accuracies of these databases must be considered and established prior to safe system flight evaluation. A simple approach to quantify reasonable flight limits is presented and evaluated for a helicopter guidance system dependent on a terrain database. The flight test evaluated involved a helicopter equipped with a Global Positioning System (GPS) receiver and radar altimeter, and a ground station GPS receiver which provided improved helicopter positioning. The precision navigation and radar altimeter data was acquired while flying low-altitude missions in south-central Pennsylvania. The aircraft-determined terrain elevations were compared with the terrain predicted by the Defense Mapping Agency (DMA) Level 1 terrain elevation data for the same area. The results suggest a safe set clearance altitude of 220 ft for flight testing of a DMA-based guidance avionic in the same area.

Zelenka, Richard E.↗

Appraisal of digital terrain elevation data for low-altitude flight

The use of terrain elevation databases in advanced guidance and navigation systems has greatly expanded. However, the limitations and accuracies of these databases must be considered and established prior to safe system flight evaluation. A simple approach to quantify reasonable flight limits is presented and evaluated for a helicopter guidance system dependent on a terrain database. The flight test evaluated involved a helicopter equipped with a Global Positioning System (GPS) receiver and radar altimeter, and a ground station GPS receiver which provided improved helicopter positioning. The precision navigation and radar altimeter data was acquired while flying low-altitude missions in south-central Pennsylvania. The aircraft-determined terrain elevations were compared with the terrain predicted by the Defense Mapping Agency (DMA) Level 1 terrain elevation data for the same area. The results suggest a safe set clearance altitude of 220 ft for flight testing of a DMA-based guidance avionic in the same area.

Zelenka, Richard E.↗