Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPERIMENTAL REACTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Experimental demonstration of a 5 kW th granular-flow reactor for solar thermochemical energy storage with aluminum-doped calcium manganite particles

A two-step cycle was discussed for solar thermochemical energy storage based on aluminum-doped calcium manganite reduction/oxidation reactions for direct integration into Air Brayton cycles. The two steps encompassed 1) the storage of concentrated solar direct irradiation via the thermal reduction of aluminum-doped calcium manganite and 2) the delivery of heat to an Air-Brayton cycle via re-oxidation of oxygen-deficient aluminum-doped calcium manganite. The re-oxidized aluminum-doped calcium manganite was fed back to the first step to complete the cycle. A 5 kWth solar thermochemical reactor operating under vacuum was fabricated and tested to examine the first cycle reduction step. Reactor operating conditions and high-flux solar simulator control were tuned for continuous reactor operation with particle temperatures > 1073 K. Continuous operation was achieved using intermittent, dense granular flows. A maximum absorption efficiency of 64.7% was shown, accounting for both sensible and chemical heat storage.

25 ENERGY STORAGE↗
DOE OSTI2023

Effect of the ..beta..-Hydroxy Group on Ester Reactivity: Combustion Kinetics of Methyl Hexanoate and Methyl 3-Hydroxyhexanoate

One of the major biofuels used today is biodiesel, composed of fatty acid methyl esters. The fats and oils feedstocks used to make biodiesel are in relatively short supply. To meet increasing global demand, engineered microorganisms have been developed to catalyze conversion of sugar to fatty acid esters that contain unique ..beta..-hydroxy-esters. This study investigated the effect of a hydroxyl group on the combustion characteristics of methyl esters by comparing the chemical behavior of methyl hexanoate (MHx) and methyl 3-hydroxyhexanoate (M3OHHx) - used as surrogates for diesel-boiling-range esters with longer fatty acid chains. The oxidation of these esters was studied experimentally in a flow reactor at 0.84 and 10 bar, 600 to 1,100 K, and stoichiometric conditions; and in a constant volume combustion chamber at 5 and 10 bar, 600 to 900 K, and equivalence ratios of 0.3 and 0.6. MHx was more reactive in the constant volume chamber at temperatures below 800 K at 10 bar and equivalence ratio of 0.6. MHx also exhibited a higher indicated cetane number (16.4) than M3OHHx (8.1). We investigated this reactivity trend using an updated MHx kinetic model and M3OHHx model developed as part of this work. The kinetic models predicted that radicals formed from MHx were consumed by low-temperature chemistry reactions, whereas the M3OHHx reactivity was significantly governed by the ..beta..-radical (on the same carbon as the OH group) chemistry which mainly terminated via the less reactive chain propagation pathway to methyl-3-oxohexanoate + HO2. This study extends our understanding of structural effects on ester reactivity, which will allow for accurate surrogate formulation and performance simulations.

AFIDA↗
DOE OSTI2020

Experimental system for studying temperature gradient-driven fracture of oxide nuclear fuel out of reactor

Temperature gradients in ceramic light water reactor (LWR) uranium dioxide (UO 2 ) nuclear fuel pellets generate thermal stresses that cause fractures in the fuel beginning early in the life of fresh fuel. The combination of heating due to fission and forced convective cooling on the exterior of LWR fuel rods generates a temperature profile that is difficult to replicate outside the reactor environment. In the present study, a state-of-the-art experimental set-up using electrical heating to replicate fission heating was built and surrogate fuel materials such as ceria (CeO 2 ) were used to validate the system. Cracking experiments were conducted on these surrogates by inducing reactivity-initiated-accident (RIA) like temperature gradients in the pellets via induction and direct resistance heating. Induction heating was done using copper coils and molybdenum susceptors which heated the surrogates to a threshold temperature that is sufficiently high for the fuel material to conduct current. Thereafter, direct resistance heating was used by a D.C. power supply to introduce volumetric heating to replicate LWR operating conditions analogous to fission heating. The pellets were held against nickel electrodes and mounted on a boron nitride test-stand. All the tests were carried out in a stainless-steel vacuum chamber. Simultaneous real-time dual imaging of the surrogate pellet surface has been implemented using an optical and infrared camera system which will be mounted along axial and perpendicular directions to the pellet surface respectively. A beam-splitter was used to split the incoming radiation from the sample into two halves. While one of the beams is transmitted from the splitter through a bandpass filter to obtain optical images, the other beam is reflected from the splitter to the thermal camera to capture full field temperature gradients of the as fabricated pellet surface during crack initiation and propagation. In the current series of tests, a 2-color pyrometer was used for recording and comparing the surface and centerline temperatures of the surrogate pellets in lieu of the thermal camera. A LabVIEW data acquisition system has been set up for collecting useful data during experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

β decay of Ba 141

The β-decay strength function of nuclides produced in fission is important as it dictates the distribution of decay energy between electrons, neutrinos, and γ rays and so is critical for calculating decay heat in reactors and for estimating the reactor antineutrino spectrum. Several experimental techniques are available to determine this strength function, including electron spectroscopy, γ-ray calorimetry (TAGS spectroscopy), and detailed, high-resolution spectroscopy with modern large high-purity germanium arrays. This work investigates the decay of the well-known and strongly produced fission fragment 141 Ba. A beam of 141 Cs was implanted at the target position of the Gammasphere and the subsequent decay of the daughter 141 Ba was studied. Extensive decay spectroscopy was possible up to the decay Q value of 3.197(7) MeV, including a significant extension of the level scheme and detailed angular correlation measurements for all levels with greater than 0.25% β feeding. The distribution of the β-decay strength was then inferred and compared to previous calorimetric studies. In conclusion, the agreement was excellent and provides a benchmark for comparing strength function methods and data for a more detailed understanding of the structure of 141 La.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Surveillance of Site A and Plot M Report (2019)

The environmental surveillance program discussed in this report is an ongoing activity that resulted from the 1976-1978 radiological characterization of the former site of Argonne National Laboratory and its predecessor, the University of Chicago's Metallurgical Laboratory. This site was part of the World War II Manhattan Engineer District Project and was located in a forested area southwest of Chicago, IL, owned by the Forest Preserve District of Cook County, now known as the Palos Area Preserves. Research was conducted at two locations in the Palos Area Preserves: Site A, a 19-acre area that contained experimental laboratories and nuclear reactor facilities; and Plot M, a 150 ft x 140 ft area used for the burial of radioactive waste. The location of the Palos Area Preserves is shown in Figure 2.1. The locations of Site A and Plot M are shown in Figure 2.2. Previous comprehensive reports on this subject provide additional detail and illustrations on sampling locations and provide descriptive material along with the results through 1981. Annual reports are available for 1982 through 2018. While earlier data will not be repeated in this report, reference is made to some of the results.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Basic Research Needs for Inverse Methods for Complex Systems under Uncertainty

Inverse problems, which aim to infer unknown properties of a system using experimental and observational data, are central to addressing many of the U.S. Department of Energy’s (DOE) most critical scientific and engineering challenges. Accurate, computationally efficient, and data-efficient solutions to inverse problems are essential for advancing DOE mission-critical science drivers, including analyzing data from large-scale experimental facilities, optimizing fusion reactor performance, accelerating materials discovery, enhancing geophysical imaging, improving wildfire predictions, and enabling autonomous systems and digital twins. However, these problems are becoming increasingly complex, often involving nonlinear, highdimensional, and interconnected systems and models that span multiple physics and scales, while relying on data with varying quantity, quality, and information content. Compounding these challenges is the uncertainty inherent in DOE-relevant systems, where errors in inputs, noise in data, incompleteness of data, and discrepancies between models and reality constrain the accuracy and precision of solutions. At the same time, the convergence of recent scientific computing trends—scientific machine learning, artificial intelligence, and computing advances such as exascale computing—is creating unprecedented opportunities for tackling these challenges. The cross-cutting nature of inverse problems, combined with their growing complexity and rapidly evolving data and algorithmic demands, strongly motivates the formulation of a prioritized research agenda to maximize their capabilities and impact. In response to this need, DOE’s Advanced Scientific Computing Research (ASCR) program in the Office of Science convened the Workshop on Basic Research Needs for Inverse Problems for Complex Systems Under Uncertainty in June 2025. This workshop brought together experts across disciplines to identify grand challenges and major opportunities in the field. Through collaborative discussions, the workshop defined transformative research directions aimed at addressing the mathematical, statistical, and computational challenges posed by inverse problems under uncertainty. As a result of these efforts, four priority research directions (PRDs) were identified to guide future research and development in this area. These PRDs, summarized below, represent a roadmap for advancing the foundational science and mathematics of inverse problems, enabling robust, scalable, and uncertainty-aware solutions that are critical for DOE applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Comparison of spatial dynamics and point kinetics approaches in multiphysics modeling of the molten salt reactor experiment

In this work, we present validation test results of fully coupled neutronics and thermal-hydraulics models of the Molten Salt Reactor Experiment (MSRE) against experimental data of the zero power pump transients and the natural circulation tests at low power. To capture the strong coupling between neutronics and thermal-hydraulics due to fuel circulation, and to account for the delayed neutron precursor (DNP) distribution, the porous media thermal-hydraulics solver Pronghorn was fully coupled to the spatial neutron dynamics code Griffin, which solves the neutron diffusion equation, and to the 0-D point kinetics solver Squirrel, using a 2-D homogenized representation of the MSRE. The validation test results show very good agreement with experimental data for both point kinetics and spatial dynamics simulations, capturing the strong feedback effect and DNP losses in the MSRE. The 0-D code Squirrel accurately predicted the time-dependent behavior in the MSRE given the steady-state spatial dynamics solution of Griffin.

42 - ENGINEERING↗
NASA NTRS2016

Investigation of Multiphase Flow in a Packed Bed Reactor Under Microgravity Conditions

In this paper we study the two-phase flow phenomena in a packed bed reactor using an integrated experimental and numerical method. The cylindrical bed is filled with uniformly sized spheres. In the experiment water and air are injected into the bed simultaneously. The pressure distribution along the bed will be measured. The numerical simulation is based on a two-phase flow solver which solves the Navier-Stokes equations on Cartesian grids. A novel coupled level set and moment of fluid method is used to construct the interface. A sequential method is used to position spheres in the cylinder. Preliminary experimental results showed that the tested flow rates resulted in pulse flow. The numerical simulation revealed that air bubbles could merge into larger bubbles and also could break up into smaller bubbles to pass through the pores in the bed. Preliminary results showed that flow passed through regions where the porosity is high. Comparison between the experimental and numerical results in terms of pressure distributions at different flow injection rates will be conducted. Comparison of flow phenomena under terrestrial gravity and microgravity will be made.

computational fluid dynamics↗
NASA NTRSDate not supplied

Preliminary Findings of the Experimental Development Unit Cold Flow Test for a Generation Zero Nuclear Propulsion Engine

Nuclear thermal propulsion (NTP) technology will greatly benefit human travel to Mars by significantly shortening transit times, improving crew safety, and providing more mission flexibility than traditional chemical rockets. As part of DRACO follow-on work to develop, build, and fly a generation zero NTP engine, a full scale flight-like experimental design unit (EDU) reactor was constructed to collect sufficient on-ground performance data to characterize flow induced vibrations (FIV) of critical reactor structures/components, inform development of the engine and reactor control algorithm, and collect pressure drop and flow distribution data across the reactor. The fluid conditions for the test program were designed to achieve system responses equivalent to that of an operational engine through all phases of engine operation including reactor startup, mainstage operation, reactor shutdown, and reactor cooldown. Over 100 tests were executed, flowing either GN2 or GHe through the EDU at varying flow rates and pressures. This experiment provided early validation of flow behavior and vibration risks before nuclear testing, boosted critical subsystem TRLs, informed design iterations, and reduced future test costs. The steady-state flow parameters for the experiment were modeled in Ansys Thermal Desktop, allowing rapid tuning and experiment-informed updates to a flight-like test matrix. The EDU dynamic environment was characterized with accelerometers, strain gauges, and high-frequency pressure transducers all sampled at 20 kHz. While many narrow-band oscillations were identified, no significant FIV occurred; the reactor structural responses tend to be enveloped by typical launch vehicle ascent vibration environments (defined up to 2 kHz), although significant energy is also present at higher frequencies.

Flow Induced Vibration↗
DOE OSTI2023

IER-523: Design of a UO 2 -BeO Critical Experiment at Sandia [Slides]

This lecture is on the design of a Uranium Dioxide-Beryllium Oxide UO 2 -BeO Critical Experiment at Sandia. This presentation provides background info on the Annular Core Research Reactor (ACRR). Additionally, this presentation shows experimental and alternative designs and concludes with a sensitivity analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

A Computational-experimental Study to Simulate Mixing and Thermal Stratification in SFRs

This NEUP project 16-10579 entitled “A Computational-Experimental Study to Simulate Mixing and Thermal Stratification in SFRs”, has investigated important phenomena of thermal stratification and mixing in Sodium-cooled Faster reactors (SFRs). A liquid metal experimental set-up was built at Kansas State University to generate high fidelity experimental data and validate computational models. The scope of the work involved - scaled down design of experimental facility, construction and commissioning of the new facility, conducting thermal-hydraulics experiments relevant to the physics of thermal stratification and mixing in the plena, developing 3D CFD models of the experiments, developing SAS4A/SASSYS-1 system model of the liquid metal experimental facility , survey of previous data in literature on stratification experiments and recommendations for improved models.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

NRIC FY 2025 Collaboration Initiatives Annual Report

The National Reactor Innovation Center (NRIC) is a national program established by the U.S. Department of Energy (DOE) in 2019 and led by Idaho National Laboratory (INL). Its mission is to work with industry and national laboratories to bridge the gap between concept, demonstration, and commercialization of advanced nuclear technology. NRIC works to inspire stakeholders and the public, empower innovators, and deliver successful outcomes through efficient collaboration and coordination with partners. NRIC is partnered with industry to accelerate the demonstration and deployment of advanced nuclear technology using DOE’s national laboratory infrastructure and expertise. NRIC’s vision is to establish four new experimental facilitates and two large reactor test beds for integrated technology demonstrators and experimentation by 2028 and complete two advanced nuclear technology tests by 2030.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

NRIC Annual Report FY 2025

The National Reactor Innovation Center (NRIC), established in August 2019, is a national United States (U.S.) Department of Energy (DOE) program. NRIC’s mission is to partner with industry and national laboratories to bridge the gap between concept, demonstration, and commercialization of advanced nuclear technology. NRIC accomplishes this through building or enhancing existing DOE infrastructure to support testing of components and systems that are key to successfully deploying advanced nuclear technology. NRIC’s vision is that by 2028, NRIC will be partnered with industry and accelerating the demonstration and deployment of advanced nuclear technology using DOE national laboratory infrastructure and expertise. NRIC will establish four new experimental facilities and two large reactor test beds for integrated technology demonstrations and experimentation by 2028 and complete two advanced nuclear technology tests by 2030. Achieving this vision will enable urgently needed abundant and affordable clean energy both domestically and internationally. NRIC’s success will inspire our nation and the global community to embrace the promising contribution of innovative nuclear reactor technologies to the clean energy economy and re-establish the U.S. as the global leader in advanced nuclear energy. NRIC is tasked with expediting the development of advanced nuclear energy technologies by bringing together private-sector technology developers and the world-class capabilities of the DOE national laboratory system. Through this program, the U.S. private sector is given access to the physical infrastructure available at DOE national laboratories to test and demonstrate their reactor concepts. NRIC works closely with the DOE-Nuclear Energy (NE) program that grants access to technical, regulatory, and financial support for commercializing nuclear energy. NRIC builds upon these new reactor concepts and technology successes to effectively strengthen U.S. nuclear leadership.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

U.S. Industry Opportunities for Advanced Nuclear Technology Development Phase II (Final Report)

This limited scope study aims at preserving the results of experimental programs for the safety of light water cooled and advanced reactors by locating and documenting, to the extent possible, where the experimental test information for these programs has been archived. The Light Water Reactor Data Preservation Activity Team initially identified seven (7) experimental programs, exceeding the required five (5) in the scope of work, which were determined to be “at risk” of potentially losing valuable data. The seven (7) experimental programs/subject areas identified are (descriptions of each experiment/experience are provided in Section 3.0): 1. FERMI-1 Reactor Accident 2. Fission Product Behavior During the In-Pile Severe Fuel Damage Test SFD I-4 3. Containment Iodine Computer Code Exercise Based on Radioiodine Test Facility (RTF) Experiment 4. Wide Range Piping Integrity Demonstration (WIND) Project 5. Iodine Chemical Research in Canada 6. High Temperature Fission Product Chemistry and Transport in Steam 7. Anything related to radioactive Methyl Iodide.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

National Reactor Innovation Center Annual Report

The National Reactor Innovation Center (NRIC), established in August 2019, is a national United States (U.S.) Department of Energy (DOE) program. NRIC’s mission is to partner with industry and national laboratories to bridge the gap between the concept, demonstration, and commercialization of advanced nuclear technology. NRIC accomplishes this through building or enhancing existing DOE infrastructure to support the testing of components and systems that are key to successfully deploying advanced nuclear technology. NRIC works to inspire stakeholders and the public, empower innovators, and deliver successful outcomes through efficient collaboration and coordination with partners. NRIC’s vision is that by 2028, NRIC will be partnered with industry and accelerating the demonstration and deployment of advanced nuclear technology using DOE national laboratory infrastructure and expertise. NRIC will establish four new experimental facilities and two large reactor test beds for integrated technology demonstrations and experimentation by 2028 and complete two advanced nuclear technology tests by 2030. Achieving this vision will enable urgently needed abundant and affordable clean energy both domestically and internationally. NRIC’s success will inspire our nation and the global community to embrace the promising contribution of innovative nuclear reactor technologies to the clean energy economy and re-establish the U.S. as the global leader in advanced nuclear energy. NRIC is tasked with expediting the development of advanced nuclear energy technologies by bringing together private-sector technology developers and the world-class capabilities of the DOE national laboratory system. Through this program, the U.S. private sector is given access to the physical infrastructure available at DOE national laboratories to test and demonstrate their reactor concepts. NRIC works closely with the Gateway for Accelerated Innovation in Nuclear (GAIN),; which is the DOE-Nuclear Energy (NE) program that grantings access to technical, regulatory, and financial support for commercializing nuclear energy. As observed in Figure 1, NRIC builds upon these new reactor concepts and technology successes to effectively strengthen U.S. nuclear leadership.

99 GENERAL AND MISCELLANEOUS↗