Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Strong‐Yet‐Ductile Eutectic Alloys Employing Cocoon‐Like Nanometer‐Sized Dislocation Cells

Abstract Eutectic alloys (EAs) with superior fluidity are known to be the easiest to cast into high‐quality ingots, making them the alloys of choice for making large‐sized structural parts. However, conventional EAs (CEAs) have never reached strength–ductility combinations on par with the best in other alloy categories. Via thermomechanical processing of cast Ni‐32.88wt%Fe‐9.53wt%Al CEAs, a cocoon‐like nano‐meshed (as fine as 26 nm) network of dislocations (CNN‐D) is produced via recovery annealing, through the rearrangement of cold‐work‐accumulated dislocations anchored by dense pre‐existing nanoprecipitates. In lieu of traditional plasticity mechanisms, such as TWIP and TRIP, the CNN‐D is particularly effective in eutectic lamellae with alternating phases, as it instigates nanometer‐spaced planar slip bands that not only dynamically refine the microstructure but also transmit from the FCC (face‐centered‐cubic) layers into the otherwise brittle B2 layers. These additional mechanisms for strengthening and strain hardening sustain stable tensile flow, resulting in a striking elevation of both strength and ductility to outrank not only all previous CEAs, but also the state of the art—additively manufactured eutectic high‐entropy alloys. The CNN‐D thus adds a novel microstructural strategy for performance enhancement, especially for compositionally complex alloys that increasingly make use of nanoprecipitates or local chemical order.

Chemistry↗

Photoelectron Spectroscopy and Theoretical Studies of PCSe − , AsCS − , AsCSe − , and NCSe − : Insights into the Electronic Structures of the Whole Family of ECX − Anions (E=N, P, As; X=O, S, Se)

Abstract The newly synthesized phosphorus‐ and arsenic‐containing analogues of the thio‐ and seleno‐cyanate anions, PCSe − , AsCS − , and AsCSe − , as well as the known ion NCSe − were investigated in the gas phase by negative‐ion photoelectron spectroscopy (NIPES), velocity‐map imaging (VMI) spectroscopy, and quantum‐chemical computations. The electron affinities (EA), spin–orbit (SO) splittings, and “symmetric”/“asymmetric” stretching frequencies of the neutral radicals ECX . (E=N, P, As; X=S, Se), generated by electron detachment from the corresponding anions, were obtained from the spectra. The calculated EAs, SO splittings, and vibrational frequencies are in excellent agreement with the experimental measurements. These newly obtained values, when combined with those previously determined for the lighter analogues, show interesting trends on descending the pnictogen and chalcogen series. These trends are rationalized based on electronegativity arguments, the electron distributions in the HOMOs, and NBO/NRT analyses.

Yuan, Qinqin↗

High Compression‐Induced Conductivity in a Layered Cu–Br Perovskite

Abstract We show that the onset pressure for appreciable conductivity in layered copper‐halide perovskites can decrease by ca. 50 GPa upon replacement of Cl with Br. Layered Cu–Cl perovskites require pressures >50 GPa to show a conductivity of 10 −4 S cm −1 , whereas here a Cu–Br congener, (EA) 2 CuBr 4 (EA=ethylammonium), exhibits conductivity as high as 2×10 −3 S cm −1 at only 2.6 GPa, and 0.17 S cm −1 at 59 GPa. Substitution of higher‐energy Br 4p for Cl 3p orbitals lowers the charge‐transfer band gap of the perovskite by 0.9 eV. This 1.7 eV band gap decreases to 0.3 eV at 65 GPa. High‐pressure X‐ray diffraction, optical absorption, and transport measurements, and density functional theory calculations allow us to track compression‐induced structural and electronic changes. The notable enhancement of the Br perovskite's electronic response to pressure may be attributed to more diffuse Br valence orbitals relative to Cl orbitals. This work brings the compression‐induced conductivity of Cu‐halide perovskites to more technologically accessible pressures.

Jaffe, Adam↗

C20H4(C4F8)3: A Fluorine-Containing Annulated Corannulene that Is a Better Electron Acceptor Than C60

There has been increased interest in the design and applications of small polyaromatic molecules for energy conversion and storage, organic transistors and OLEDs, and other emerging areas of modern technology.[1] In particular, functionalized polycyclic aromatic hydrocarbons (PAHs) were shown to demonstrate excellent electrical mobilities, in organic thin-film transistors, in some cases even under ambient conditions.[2] It has been suggested that air stability of such organic materials is correlated with their electronic properties, and more specifically, with a high electron affinity.[3] Until recently, geodesic PAHs, such as corannulene[4] or sumanene[5] and their numerous derivatives have not been seriously considered for optoelectronic applications because (i) they typically possess very low electron affinities (e.g., EA(C20H10) = 0.5(1) eV),[6] and (ii) laborious multistep syntheses with moderate-to-low yields made them practically unavailable for such studies.[7] Although the low availability of sumanene remains unchanged, significant progress has been made lately in the large-scale synthesis of corannulene.[8] Furthermore, our recent work demonstrated that functionalization of corannulene molecule with electron withdrawing groups (EWGs) results in drastic enhancement of its electron acceptor properties.[9] In particular, for trifluoromethylated derivative C20H5(CF3)5, a 950 mV positive shift in the reduction potential relative to the parent C20H10 was measured. We also predicted that other EWGs, including halogen atoms or cyanide group, could be used to enhance electron affinity of corannulene. Nearly linear correlation between the number of EWGs and the electron affinity (reduction potential) of the corresponding EWG-substituted corannulene molecules that was demonstrated by our DFT calculations, and, more recently, confirmed for C20H10-x(CF3)x=2,3,[10] provides a good tool for design of the molecules with desired electronic properties. Here, we report the first synthesis, structure, and electronic properties (in solution and in the gas phase) of the derivative of corannulene, which has a higher electron affinity (EA) than a well-studied acceptor fullerene C60

Environmental Molecular Sciences Laboratory↗

A Thorough Characterization of the Tellurocyanate Anion

Tellurocyanate, [TeCN] − , is the heaviest group 16 congener of the cyanate anion, [OCN] − . Due to the relative instability of the C─Te bond, tellurocyanate chemistry has seen only scarce attention. Here, we present the facile synthesis and thorough characterization of [K@crypt-222][TeCN]. The anion is essentially linear with interatomic distances C─N = 1.150(6)Å and C─Te = 2.051(4)Å, thus approximating a C≡N triple bond and for C─Te a bond order between 1 and 2. Fully 13 C and 15 N labeled [Te 13 C 15 N] − allowed for the extraction of chemical shifts and all possible coupling constants ( 13 C = 77.8 ppm, 15 N = 285.7 ppm, 125 Te = −566 ppm, 1 J 13C-15N = 8 Hz, 1 J 13C-125Te = 748 Hz, 2 J1 5N-125Te = 55 Hz), which were also determined independently by quantum chemical calculations. In the series [ChCN] − (Ch = O─Te), [TeCN] − shows the strongest spin-orbit coupling (SOC) induced heavy-atom effect on the light-atom shielding (SO-HALA-effect). In contrast, 15 N shifts are also well described without considering relativistic effects and/or SOC. Negative-ion photoelectron spectroscopy was used to extract the electron affinity (EA = 3.034 eV) and spin-orbit splitting (3807 cm −1 ) of [TeCN] • . These values continue the trends of falling EA and rising SOC in the series [ChCN] • .

Bonding analysis↗

Development of rapid bioconversion with integrated recycle technology for ethanol production from extractive ammonia pretreated corn stover

ABSTRACT High enzyme loading and low productivity are two major issues impeding low cost ethanol production from lignocellulosic biomass. This work applied rapid bioconversion with integrated recycle technology (RaBIT) and extractive ammonia (EA) pretreatment for conversion of corn stover (CS) to ethanol at high solids loading. Enzymes were recycled via recycling unhydrolyzed solids. Enzymatic hydrolysis with recycled enzymes and fermentation with recycled yeast cells were studied. Both enzymatic hydrolysis time and fermentation time were shortened to 24 h. Ethanol productivity was enhanced by two times and enzyme loading was reduced by 30%. Glucan and xylan conversions reached as high as 98% with an enzyme loading of as low as 8.4 mg protein per g glucan. The overall ethanol yield was 227 g ethanol/kg EA‐CS (191 g ethanol/kg untreated CS). Biotechnol. Bioeng. 2017;114: 1713–1720. © 2017 Wiley Periodicals, Inc.

Jin, Mingjie↗

Suppression of diffraction in deep-inelastic scattering on nuclei and dynamical mechanism of leading twist nuclear shadowing

Abstract Using the leading twist approach (LTA) to nuclear shadowing, we calculate the ratios of diffractive and usual parton distributions for a heavy nucleus (Pb) and the proton,$$ {R}_{A/p}=\left({f}_{i/A}^{D(3)}/{f}_{i/A}\right)/\left({f}_{i/p}^{D(3)}/{f}_{i/p}\right) $$ R A / p = f i / A D 3 / f i / A / f i / p D 3 / f i / p , for coherent and summed (coherent plus quasi-elastic) nuclear deep-inelastic scattering. We find thatR A/p ≈ 0.5 − 1 for quarks as well as for the ratio of the diffractive and total cross sections$$ {\left[\left({d\sigma}_{\textrm{diff}}/{d M}_X^2\right)/{\sigma}_{\textrm{tot}}\right]}_{eA}/{\left[\left({d\sigma}_{\textrm{diff}}/{d M}_X^2\right)/{\sigma}_{\textrm{tot}}\right]}_{ep} $$ dσ diff / dM X 2 / σ tot eA / dσ diff / dM X 2 / σ tot ep andR A/p ≈ 0.5 − 1.3 for gluons in a broad range ofx, including the kinematics of the Electron-Ion Collider, which reaffirms the difference from the nuclear enhancement ofR A/p predicted in the gluon saturation framework. We demonstrate that the magnitude ofR A/p is controlled by the cross section of the interaction of hadronic fluctuations of the virtual photon with target nucleons, which explains an enhancement ofR A/p in the color dipole model and its suppression in LTA. We argue that the black disk limit corresponds toR A/p = 1 and$$ {R}_{A/p}^{\textrm{coh}} $$ R A / p coh = 0.86 for the summed and coherent scattering, respectively. Relying on an intuitive definition of the saturation scale, we show that the ratio of the saturation scales of a heavy nucleus and proton$$ {Q}_{sA}^2(b)/{Q}_{sp}^2(b)\approx 1 $$ Q sA 2 b / Q sp 2 b ≈ 1 at small impact parametersbdue to the strong leading twist nuclear shadowing and diluteness of the nuclear density.

Physics↗

A parallel evolutionary multiple-try metropolis Markov chain Monte Carlo algorithm for sampling spatial partitions

We develop an Evolutionary Markov Chain Monte Carlo (EMCMC) algorithm for sampling spatial partitions that lie within a large, complex, and constrained spatial state space. Our algorithm combines the advantages of evolutionary algorithms (EAs) as optimization heuristics for state space traversal and the theoretical convergence properties of Markov Chain Monte Carlo algorithms for sampling from unknown distributions. Local optimality information that is identified via a directed search by our optimization heuristic is used to adaptively update a Markov chain in a promising direction within the framework of a Multiple-Try Metropolis Markov Chain model that incorporates a generalized Metropolis-Hastings ratio. We further expand the reach of our EMCMC algorithm by harnessing the computational power afforded by massively parallel computing architecture through the integration of a parallel EA framework that guides Markov chains running in parallel.

97 MATHEMATICS AND COMPUTING↗

An Experimental Study of the Dissolution Rates of Simulated Aluminoborosilicate Waste Glasses as a Function of pH and Temperature under Dilute Conditions

Single-pass flow-through tests were conducted to determine the pH (7 - 12) and temperature (23- 90°C) dependence of kinetic rate-law parameters; ko, η, and Ea, for the dissolution of glass in aqueous solution. Experiments were performed with three prototypic nuclear waste glasses that span a wide compositional range, which covers, with high probability, the expected processing composition range for candidate immobilized low-activity waste (ILAW) glasses. Comparison of the B to Na release rates for one glass was incongruent at 23 and 40°C, and pH(23°C) = 7.0 and 8.0, suggesting two distinct mechanisms are responsible for the Na+ release, namely Na+-H+ ion exchange and matrix dissolution. Matrix dissolution became the dominant dissolution mechanism for all glasses at pH values greater than 9.0 as evident by the congruent release of Al, B, Na, and Si to solution. By combining the results collected for each ILAW glass at pH values greater than 9.0, pH and temperature dependent rate law parameters were determined for Al, B, Na, and Si release. A comparison of the pH power-law coefficient for Al, B, Na, and Si at each temperature suggest that η does not depend on temperature within experimental error and suggests the release of these elements into solution is controlled by the same dissolution mechanism at the forward rate of reaction. The activation energy (Ea), based on B release, range from 52 ±4 to 56 ±6 kJ/mol which suggest that dissolution is a surface-controlled reaction mechanism. The data presented in this manuscript suggest that for these three ILAW glasses the chemical durability for each glass is relatively the same under these test conditions. A lack of compositional dependence on the dissolution rate is observed even though there is as much as a 39 kJ/mol difference in the free energy of hydration (ΔGhyd) among the borosilicate waste glasses tested. This similarity in dissolution rate despite the large ΔGhyd difference is almost certainly the result of the structural similarities between these glasses, which suggests that ILAW glasses have similar, if not identical, polymerization states. This is evident from their almost identical 29Si chemical shifts and molar ratio of the alkali elements, Σ(Na+ K + Li), to the network former elements, Σ(AlIV + BIV + Fe + Si), contained in each glass. The polymerization state is an indication of the number of framework SiO4 linkages contained in the glass network. In general, the greater the number of framework SiO4 linkages the more durable the glass. Finally, in agreement with previous work, these results suggest breakage of the Si-O bond is the rate-determining dissolution mechanism under alkaline conditions [pH(23°C) > 9.0] far from saturation with respect to a alteration phase or phases.

Accelerated Weathering↗

ST6GAL1 negatively regulates monocyte transendothelial migration and atherosclerosis development

Highlights: • ST6GAL1 expression is inversely related to atherosclerosis development. • Knockdown of ST6GAL1 in vascular endothelial cells directly promotes monocyte transendothelial migration. • ST6GAL1 overexpression inhibits TNFα-induced monocyte transendothelial migration. • β-catenin sialylation level is downregulated in inflammatory endothelial cells. Monocyte transendothelial migration is a critical step in the initial stage of atherosclerosis, in which the involvement of α-2,6 sialyltransferase 1 (ST6GAL1) has been confirmed by increasing evidence. But the direct relationship between ST6GAL1 and atherosclerosis remains incompletely uncertain. In this study, we demonstrated that the expression level of ST6GAL1 in vascular endothelium was significantly decreased in atherosclerosis development process, while obviously recovered after atherosclerosis regression. Further analysis showed that knockdown of ST6GAL1 by RNA interference in vascular endothelial cells EA. hy926 obviously promoted TNFα-triggered monocyte-transendothelial migration, whereas overexpression of ST6GAL1 strongly inhibited monocyte-transendothelial migration. Moreover, we firstly found β-catenin is a sialylated protein and its sialylation level is decreased in TNFα-treated EA. hy926 cells, suggesting that the function of ST6GAL1 in preventing both atherosclerosis development and monocyte transendothelial migration might result from the sialylation of β-catenin of endothelium. Our results suggested ST6GAL1 might be a potential target for atherosclerosis prevention and treatment.

60 APPLIED LIFE SCIENCES↗

Protective effect of electro-acupuncture at maternal different points on perinatal nicotine exposure-induced pulmonary dysplasia in offspring based on HPA axis and signal transduction pathway

Perinatal nicotine exposure can not only lead to lung dysplasia in offspring, but also cause epigenetic changes and induce transgenerational asthma. Previous studies have shown that electro-acupuncture (EA) applied to “Zusanli” (ST 36) can improve the lung morphology and correct abnormal expression of lung development-related protein in perinatal nicotine exposure offspring. However, it is still unclear whether ST 36 has a specific therapeutic effect and how maternal acupuncture can protect the offspring from pulmonary dysplasia. In this study, we compared the different effect of ST 36 and “Fenglong” (ST 40), which belong to the same meridian, in terms of lung pulmonary function and morphology, PPARγ, β-catenin, GR levels in the lung tissues and CORT in the serum of perinatal nicotine exposure offspring, and explored the mechanism of acupuncture based on the maternal hypothalamus-pituitary-adrenal (HPA) axis. It is shown that EA applied to ST 36 could restore the normal function of maternal HPA axis and alleviate maternal glucocorticoid overexposure in offspring, thereby it can up-regulate the PTHrP/PPARγ and down-regulate the Wnt/β-catenin signaling pathways, and protects perinatal nicotine exposure-induced pulmonary dysplasia in offspring. Its effect is better than that of ST 40. These results are of great significance in preventing perinatal nicotine exposure-induced pulmonary dysplasia in offspring.

60 APPLIED LIFE SCIENCES↗

New insights in low-energy electron-fullerene interactions

The robust Regge-pole methodology has been used to probe for long-lived metastable anionic formation in C n (n = 20, 24, 26, 28, 44, 70, 92 and 112) through the calculated electron elastic scattering total cross sections (TCSs). All the TCSs are found to be characterized by Ramsauer-Townsend minima, shape resonances and dramatically sharp resonances manifesting metastable anionic formation during the collisions. The energy positions of the anionic ground states resonances are found to match the measured electron affinities (EAs). Here, we also investigated the size-effect through the correlation and polarization induced metastable resonances as the fullerene size varied from C 20 through C 112 . The C 20 TCSs exhibit atomic behavior while the C 112 TCSs demonstrate strong departure from atomic behavior attributed to the size effect. Surprisingly C 24 is found to have the largest EA among the investigated fullerenes making it suitable for use in organic solar cells and nanocatalysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Prompt-NO formation in methane/oxygen/nitrogen flames seeded with oxygenated volatile organic compounds: Methyl ethyl ketone or ethyl acetate

In the present work, CH and NO profiles are determined using laser-induced fluorescence (LIF) measurements in eight low-pressure laminar flames of CH{sub 4}/O{sub 2}/N{sub 2} containing various amounts of methyl ethyl ketone or ethyl acetate with respect to the equivalence ratio. Relative CH LIF signals are calibrated using cavity ring-down spectroscopy (CRDS), while NO LIF calibration is performed in the burned gases of NO seeded flames. Temperature measurements are obtained using a coated Pt/Rh thermocouple and serve as temperature profiles input for Chemkin modeling. Volatile organic compound (VOC) submechanisms, previously validated upon major and intermediate species profiles measured using sampling techniques, are incorporated into the GDF-Kin 3.0{sub N}CN for the CH{sub 4} oxidation. This mechanism is adjusted and validated to predict the effect of VOCs seeding on CH and NO formation. It takes into account not only the CH and NO profiles but those previously measured. When methane is replaced by either MEK or EA, the NO mole fraction in the burned gases and the CH peak value are found to jointly decrease, indicating that NO is mainly formed according to the prompt-NO mechanism. According to the kinetic analysis, the VOC impact on NO formation is demonstrated. It is shown that CH radical formation, through the C1 sequence, mainly involves the CH{sub 3} radical, which is formed with the same propensity by one molecule of methane, MEK, or EA. Due to the methane replacement by VOC while the equivalence ratio is maintained constant, we found that the CH peak value decrease follows the total fuel volumetric flow rate decrease, yielding, an NO decrease in the burned gases. (author)

2-3-PENTANEDIONE↗

Grain boundary structure search by using an evolutionary algorithm with effective mutation methods

Grain boundaries (GBs) accommodate the misorientation between adjacent grains in a polycrystalline material. GBs are geometrically described by the macroscopic and microscopic degrees of freedom. Besides, at the atomistic level, GBs exhibit complicated behaviors under varying thermodynamic conditions. The complexity of atomistic GB structures demands stochastic searching for possible states. The effectiveness of stochastic search methods relies on techniques to recreate and select atomistic structures. In this work, we developed a new mutation operator that can induce direct and collective atomistic structure changes to boost the search efficiency of exploring GB structures with evolutionary algorithms (EA). We implemented the mutation methods along with innovative selection, crossover, boundary condition preprocessing methods to form an EA-based package to explore GB structures in grand canonical ensembles with atomistic simulations. We used this package to study the [001] symmetric tilt grain boundaries (STGBs) in FCC copper (Cu), the [110] STGBs in BCC tungsten (W), and the $[1\bar{2}10]$ STGBs in HCP magnesium (Mg). The results show that our design and implementation based on new mutation procedures, selection, and boundary conditions provide a high-quality search of atomistic GB structures in the grand canonical ensemble for different crystal lattices.

36 MATERIALS SCIENCE↗

Structural and transport effects of doping perfluorosulfonic acid polymers with the heteropoly acids, H 3 PW 12 O 40 or H 4 SiW 12 O 40

A perfluorosulfonic acid (PFSA) polymer with pendant side chain –O(CF 2 ) 4 SO 3 H was doped with the heteropoly acids (HPAs), H 3 PW 12 O 40 and H 4 SiW 12 O 40 . Infrared spectroscopy revealed a strong interaction between the HPA and the PFSA ionomer. Modes associated with the peripheral bonds of the HPA were shifted to lower wave numbers when doped into PFSA membranes. Small-angle X-ray scattering (SAXS) measurements showed the presence of large crystallites of HPA in the membrane with d spacings of ca. 10 Å, close to the lattice spacing observed in bulk HPA crystals. Under wet conditions the HPA was more dispersed and constrained the size of the sulfonic acid clusters to 20 Å at a 5 wt% HPA doping level, the same as in the vacuum treated ionomer samples. Under conditions of minimum hydration the HPA decreased the Ea for the self-diffusion of water from 27 to 15 kJ mol -1 . The reverse trend was seen under 100% RH conditions. Proton conductivity measurements showed improved proton conductivity of the HPA doped PFSAs at a constant dew point of 80 °C for all temperatures up to 120 °C and at all relative hummidities up to 80%. The activation energy for proton conduction generally was lower than for the undoped materials at RH ≤80%. Significantly the Ea was 1/2 that of the undoped material at RHs of 40 and 60%. A practical proton conductivity of 113 mS cm -1 was observed at 100 °C and 80% RH.

30 DIRECT ENERGY CONVERSION↗

High performance noble-metal-free NiCo/AC bimetal for gasification in supercritical water

We report high performance Noble-metal-free NiCo/AC bimetal for gasification in supercritical water by the polyol reduction method with chloroplatinic acid as nucleation seed. At 475 _C and 20 min, the carbon efficiency (CE) for gasification of phenol with NiCo/AC has reached about 65%, which represents a more than 20-fold enhancement of carbon efficiency compared to the Co/AC and 6-fold compared to the Ni/AC. The CE of commercial noble Ru/C (5 wt%) catalyst is only about 15% higher than that of NiCo/AC catalyst. The catalyst was characterized by BET, XRD, XPS and TEM. The results indicate smaller and higher disperse of NiCo alloy has been achieved. By using NiCo/AC catalyst, the CE can reach about 90% at 525 _C and 60 min with a 5 wt% phenol, 0.098 kg/m3 density and catalyst loading of 0.5 g/g (the mass of NiCo/AC catalyst/the mass of phenol). The results of GCeMS indicate NiCo/AC can suppress tar successfully. A kinetic modeling was also proposed to describe gaseous product and tar formation, which gives the activation energy (Ea) 123.56 ± 31 kJ/mol and the frequency factor 16.93 ± 0.48 for gaseous products. While for tar formation, the Ea is 112.95 ± 24 kJ/mol and the frequency factor is 13.99 ± 0.37. The successful use of noble-metal-free NiCo/AC shows the potential to replace noble Ru-catalysts in SCWG process for gases fuels by bimetal.

phenol, gasification, supercritical water, NiCo/AC↗