Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Drilling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Trace elements profiles, notably Hg, from a preliminary study of the Apollo 15 deep-drill core.

The possible thermal gradient near the surface during a lunation is considered together with the heat flow from the interior, the physical process of Hg migration, the results from core and trench samples from previous missions, and other temperature sensitive phenomena that may help understand the processes. U, Os, and Ru concentrations in the deep drill core samples are of potential interest and are summarized in a table. The Os tends to parallel the Hg profile with depth.

Jovanovic, S.↗
NASA NTRS1973

Analysis of stresses at the bore of a drilled ball operating in a high-speed bearing

Three-dimensional stress distributions were calculated for both a regular drilled ball with a stiffening web. The balls were 20.6 mm (0.8125 in.) in diameter and had a 12.6 mm (0.496 in.) diameter concentric hole. The stiffening web was 1.5 mm (0.06 in.) thick. The calculations showed that a large reversing tangential stress at the hole bore was reduced by one-half by the addition of the web.

Coe, H. H.↗
NASA NTRS1973

Carbon chemistry of the Apollo 15 and 16 deep drill cores

The carbon chemistry of the Apollo 15 and 16 deep drill cores is a function of the surface exposure plus the chemical and mineralogical composition of the individual samples. The depth profiles of carbide and methane yields in the Apollo 15 core show a general decline with depth and correlate with the solar wind noble gas content, percentage agglutinates, track densities, and metallic iron. All horizons examined were exposed for a considerable time on the lunar surface. The Apollo 16 core samples show that chemical and mineralogical composition plays an important role in determining the nature of carbide-like material present in the fines. The higher aluminum and calcium contents and lower iron contents of highlands material result in carbide-like material yielding less CD4 and more C2D2 (deuteroacetylene) upon DF acid dissolution.

Wszolek, P. C.↗
NASA NTRS1973

Inert gas stratigraphy of Apollo 15 drill core sections 15001 and 15003

Rare gase contents were studied in Apollo 15 drill core sections corresponding to 207 to 238 and 125 to 161-cm depths, with respect to layering of the core, turnover on a centimeter scale, and cosmic proton bombardment history. Trapped gas abundance was established in all samples, the mean grain size being a major factor influencing the absolute rare gas contents. Analysis of the results suggests that the regolith materials were exposed to galactic and solar cosmic rays long before their deposition.

Huebner, W.↗
NASA NTRS1976

Method of removing drilling chips

Special chuck directs mixture of pressurized air and water through drill bit, thus removing chips during boring of long, large diameter holes.

Ransom, F. E.↗
NASA NTRS1976

Mn-53 in the Apollo 15 and 16 drill stems - Evidence for surface mixing

The activity of cosmic ray produced Mn-53 has been measured in a series of samples from the upper 10 cm of the Apollo 15 and 16 drill stems. The activity profiles for both cores indicate disturbance to depths of about 3 g/sq cm within the last 6 m.y. In at least one case (Apollo 16) the soil has been gardened to at least 14 g/sq cm within the last 10 m.y., and material from the upper less than 2 g/sq cm has been buried to 14 g/sq cm by this gardening. The results for the Apollo 15 core are compatible with a wide variety of possible histories including loss or gain of material.

Nishiizumi, K.↗
NASA NTRS1976

Petrographic and ferromagnetic resonance studies of the Apollo 15 deep drill core

Detailed petrographic grain size, and ferromagnetic resonance studies were performed on a representative suite of samples from the Apollo 15 deep drill core. Petrographic analyses of the 90-150 micron size fraction show a subtle upward increase in the ratio of mare to highland components. The agglutinate content at the FMR intensity normalized to FeO show that the soils in the core are generally immature to submature. The most striking feature shown by the maturity indices is a systematic decrease in maturity from the lunar surface to a depth of about 40 cm. Although other mechanisms are possible, the downward decrease in maturity can be attributed to in situ reworking over a time span of 400 m.y. at a 50% probability.

Heiken, G. H.↗
NASA NTRS1976

Origin of the Apollo 17 deep drill coarse-grained layer

A depositional model of the coarse-grained layer of the Apollo 17 deep drill is described which takes into account thermoluminescence, tracks, Na-22 and Al-26 studies. On the basis of this evidence, it appears that the coarse-grained layer was emplaced some 100 m.y. ago associated either with Camelot Crater or the Central Cluster craters; at that time it was capped by some 25 cm of material which were recently (about 2 m.y.) excavated. The resulting depression has partially and gradually filled since.

Crozaz, G.↗
NASA NTRS1976

The remarkable chemical uniformity of Apollo 16 layered deep drill core section 60002

Atomic absorption and colorimetric spectrophotometers were used to determine major- and minor-element abundances in 12 samples from layered section 60002 of the Apollo 16 deep drill core. It is suggested that gardening of a relatively thick local unit produced the layering in this section in such a manner that the proportions of materials of different compositions remained virtually unchanged.

Nava, D. F.↗
NASA NTRS1976

The Apollo 16 drill core - Modal petrology and characterization of the mineral and lithic component

A string of 59 polished thin sections covering the length of the Apollo 16 deep drill core has been examined. A modal analysis, involving the optical classification of 116,000 points was made, and over 500 mineral and lithic fragments from the core were chemically analyzed using an electron microprobe. These data were used to identify and characterize the source areas of the core material and to reconstruct the accumulation history of the core.

Vaniman, D. T.↗
NASA NTRS1977

Very low Ti /VLT/ basalts - A new mare rock type from the Apollo 17 drill core

Phaneritic fragments, vitrophyres, and glass beads of a new very low Ti (VLT) mare basalt are found in the Apollo 17 drill core. VLT lithic fragments are characterized by TiO2 content of approximately 0.5%, Mg/(Mg + Fe) of approximately 0.52, CaO/Al2O3 of approximately 0.9, and low alkali content. Although mineral systematics and modal composition of VLT basalt are similar to Apollo 12 and 15 low Ti basalts, VLT basalts cannot be related to these mare basalts by crystal fractionation. Since VLT basalt is isochemical with some of the less mafic green glasses, fractionation of VLT magma from a liquid of green-glass composition is a possibility. Spectral reflectance studies suggest that VLT-type basalts may be relatively common in mare basins.

Vaniman, D. T.↗
NASA NTRS1977

Provenance of Apollo 15 deep drill core sediments

Modal analysis and electron probe microanalysis were performed on polished thin sections prepared from Apollo 15 deep drill core soils in an effort to characterize their provenance. The particles were in the 0.25-1.00 mm size range. The particles were classified into mineral fragments, agglutinates, glasses, rock fragments, and breccias. The results show that highland and mare material occur in the core in an approximately 60:40 ratio, with mare component generally increasing from bottom to top in the core. Quartz-normative basalts are nearly twice as abundant as olivine basalts. Nonmare sources include KREEP basalt flow units from some depth in the crust, excavated by cratering events and supplied to the site as 'rays'.

Basu, A.↗
NASA NTRS1977

Petrology and geochemistry of lithic fragments separated from the Apollo 15 deep-drill core

Petrological and geochemical analysis of lithic fragments separated from the Apollo 15 deep-drill core showed these fragments to fall into the essentially the same range of rock types as observed in surface soil samples and large rock samples. Three particles are singled out as being of special interest. One sample is a mare basalt containing extremely evolved phases. The particle may represent small-scale imperfect crystal/liquid separation in a lava flow. A green glass particle is not the ultramafic emerald green glass described from the Apollo 15 site, but rather an ANT-like light green color, and has a quite different chemical composition from the ultramafic variety. One mare basalt displays a positive Eu anomaly and is enriched in plagioclase relative to olivine plus pyroxene.

Lindstrom, M. M.↗
NASA NTRS1977

The Apollo 16 deep drill core

Numerous investigations have been undertaken on samples from the Apollo 16 deep drill core. These studies are diverse in character and range from grain size analyses, through chemical and mineralogical studies to investigations of nuclear particle tracks, rare gases, and isotopic abundances. In order to comprehend the significance of the studies of the mineral chemistry of the clasts below 1 mm in size in several samples with respect to other studies, it became obvious that a review of all previous works was desireable. After reviewing the available literature it can be concluded that only four major stratigraphic divisions exist in the core section. Whether these represent four single events or multi-stage events within one unit is uncertain; however, it appears that accumulation of the material in the core has taken place during a period of 1 billion years, and that the material is predominantly of locally derived Highlands origin.

Meyer, H. O. A.↗
NASA NTRS1977

Shallow drilling in the 'Bunte Breccia' impact deposits, Ries Crater, Germany

The paper is a field report concerning a shallow core drilling program in the multicolored breccia deposits which constitute 90% of all the impact breccias beyond the outer rim of the Ries, a 26-km-diam impact crater. About 480 m of core was recovered from 11 locations with radial ranges between 16.5 and 35 km from the crater center. The cores consist of breccias, whose components are derived from the crater itself and the terrain outside the crater. The local components dominate the breccias at the larger ranges, and possibly constitute more than 90% of the breccia volume at the greatest distances investigated. The great depth of the Bunte Breccia (84 m at 27 km range), together with the preponderance of local components, necessitates an emplacement mechanism that ploughed up and mixed the crater surroundings to depths greater than 50 m.

Hoerz, F.↗
NASA NTRS1975

Rare gases and Ca, Sr, and Ba in Apollo 17 drill-core fines

Trapped gas isotopic compositions and spallation gas concentrations as functions of depth in the Apollo 17 drill core were determined from mass spectrometer studies by means of correlation techniques. The distribution of He, Ne, Ar, Kr, and Xe as well as Ca, Sr, and Ba was investigated, and rare-gas spallation and neutron capture profiles are compared with attention to proposed depositional models for the Taurus-Littrow regolith. The data exclude a sedimentation pattern similar to that found at the Apollo 15 site but are possibly compatible with long-term continuous accretion models or models of very recent rapid accumulation of regolith.

Pepin, R. O.↗
NASA NTRS1980

Adjusting an electron beam for drilling

Reticle contains two concentric circles: inner circle insures beam circularity and outer circle is guide to prevent beam from cutting workpiece clamp. Precise measurement of beam and clamp are required with old reticle. New reticle speeds up electron-beam drilling process by eliminating need to rotate eyepiece to make measurements against reticle scale.

Childress, C. L.↗