Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Investigation of size dependent structural and optical properties of thin films of CdSe quantum dots

Research highlights: {yields} CdSe q-dots have been synthesized using simple chemical synthesis route. {yields} Thin film of CdSe quantum dots exhibited self-organized growth. {yields} Size dependent blue shift observed in the absorption edge of CdSe nanocrystallites. {yields} PL emission band corresponds to band edge luminescence and defect luminescence. {yields} Organized growth led to enhancement in luminescence yield of smaller size Q-dots. -- Abstract: Cadmium selenide (CdSe) quantum dots were grown on indium tin oxide substrate using wet chemical technique for possible application as light emitting devices. The structural, morphological and luminescence properties of the as deposited thin films of CdSe Q-dot have been investigated, using X-ray diffraction, transmission electron microscopy, atomic force microscopy and optical and luminescence spectroscopy. The quantum dots have been shown to deposit in an organized array on ITO/glass substrate. The as grown Q-dots exhibited size dependent blue shift in the absorption edge. The effect of quantum confinement also manifested as a blue shift of photoluminescence emission. It is shown that the nanocrystalline CdSe exhibits intense photoluminescence as compared to the large grained polycrystalline CdSe films.

36 MATERIALS SCIENCE↗

Effect of shells on photoluminescence of aqueous CdTe quantum dots

Graphical abstract: Size-tunable CdTe coated with several shells using an aqueous solution synthesis. CdTe/CdS/ZnS quantum dots exhibited high PL efficiency up to 80% which implies the promising applications for biomedical labeling. - Highlights: • CdTe quantum dots were fabricated using an aqueous synthesis. • CdS, ZnS, and CdS/ZnS shells were subsequently deposited on CdTe cores. • Outer ZnS shells provide an efficient confinement of electron and hole inside the QDs. • Inside CdS shells can reduce the strain on the QDs. • Aqueous CdTe/CdS/ZnS QDs exhibited high stability and photoluminescence efficiency of 80%. - Abstract: CdTe cores with various sizes were fabricated in aqueous solutions. Inorganic shells including CdS, ZnS, and CdS/ZnS were subsequently deposited on the cores through a similar aqueous procedure to investigate the effect of shells on the photoluminescence properties of the cores. In the case of CdTe/CdS/ZnS quantum dots, the outer ZnS shell provides an efficient confinement of electron and hole wavefunctions inside the quantum dots, while the middle CdS shell sandwiched between the CdTe core and ZnS shell can be introduced to obviously reduce the strain on the quantum dots because the lattice parameters of CdS is situated at the intermediate-level between those of CdTe and ZnS. In comparison with CdTe/ZnS core–shell quantum dots, the as-prepared water-soluble CdTe/CdS/ZnS quantum dots in our case can exhibit high photochemical stability and photoluminescence efficiency up to 80% in an aqueous solution, which implies the promising applications in the field of biomedical labeling.

36 MATERIALS SCIENCE↗

Al-doped ZnS shell as a surface shield for enhancing the stability of Cu:ZnInS/ZnS/ZnS:Al quantum dots and their application in light emitting diodes

Graphical abstract: The normalized electroluminescence spectra of Cu:ZnInS@ZnS:Al (a) and Cu:ZnInS@ZnS quantum dot based LEDs under an injection current of 10 mA for various operation times are presented. The quantum dots were mixed with same amount of silicone resin and treated at 50 °C for 30 min. - Highlights: • The self-passivated Cu:ZnInS@ZnS:Al quantum dots were synthesized successfully. • The thermal and current stability of Cu:ZnInS@ZnS:Al quantum dots were improved. • The Cu:ZnInS@ZnS:Al quantum dots had a small reduction of 20% in PL lifetime under thermal annealing from 50 °C to 250 °C. • The Cu:ZnInS@ZnS:Al quantum dot based LED had a 3% luminescence enhancement under 10 mA injection current for a long time. - Abstract: Cu:ZnInS/ZnS/ZnS:Al quantum dots (QDs) with a Cu-doped inner core and an Al-doped outer shell were synthesized in this work, exhibiting improved stability of luminescence, compared with Cu:ZnInS/ZnS/ZnS QDs. The X-ray diffraction patterns and photoluminescence spectra confirmed that the Al ions were doped into the ZnS shell. The stability of Cu:ZnInS/ZnS/ZnS:Al QDs under various thermal annealing temperatures was studied by steady-state and time resolved photoluminescence spectroscopy. The Cu:ZnInS/ZnS/ZnS:Al QDs had a relatively small reduction of 20% in photoluminescence lifetime from 167 ns under thermal annealing at 50 °C to 132.8 ns at 250 °C, compared to a 55% drop for the undoped ones, indicating less thermal effect on the photoluminescence of the QDs with an Al-doped shell. The Cu:ZnInS/ZnS/ZnS:Al QD-based light emitting diodes (LEDs) had a 3% luminescence enhancement under injection current of 10 mA for 30 h, compared to a 13% reduction for the undoped QDs, suggesting improved thermal stability of photoluminescence for the QDs with Al-doped shell. Finally, Cu:ZnInS/ZnS/ZnS:Al QD-based white LEDs with good color rendering index (>80) and correlated color temperature (<4500 K) were fabricated by combining with green emitting CuInS{sub 2}/ZnS QDs. The self-passivated QDs show promises for enhancing thermal stability of QD-based LEDs in the conserved energy lighting industry.

36 MATERIALS SCIENCE↗

State-conditional coherent charge qubit oscillations in a Si/SiGe quadruple quantum dot

Universal quantum computation requires high-fidelity single-qubit rotations and controlled two-qubit gates. Along with high-fidelity single-qubit gates, strong efforts have been made in developing robust two-qubit logic gates in electrically gated quantum dot systems to realise a compact and nanofabrication-compatible architecture. Here we perform measurements of state-conditional coherent oscillations of a charge qubit. Using a quadruple quantum dot formed in a Si/SiGe heterostructure, we show the first demonstration of coherent two-axis control of a double quantum dot charge qubit in undoped Si/SiGe, performing Larmor and Ramsey oscillation measurements. We extract the strength of the capacitive coupling between a pair of double quantum dots by measuring the detuning energy shift (≈75 μeV) of one double dot depending on the excess charge configuration of the other double dot. Finally, we further demonstrate that the strong capacitive coupling allows fast, state-conditional Landau–Zener–Stückelberg oscillations with a conditional π phase flip time of about 80 ps, showing a promising pathway towards multi-qubit entanglement and control in semiconductor quantum dots.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Formation and optical properties of GaSb quantum dots epitaxially grown on Si substrates using an ultrathin SiO{sub 2} film technique

We developed a technique for forming epitaxial GaSb quantum dots on Si substrates using ultrathin SiO{sub 2} films that contain epitaxial Ge nuclei. Unlike Volmer-Weber-type GaSb quantum dots on Si, the dot density was higher (10{sup 9}-10{sup 12} cm{sup -2}) and the dot size was controlled in the range of approximately 10-100 nm. The nucleation of quantum dots was initiated by trapping Ga atoms on the Ge nuclei. Photoluminescence spectroscopy measurement at 5 K revealed the quantum-confinement effect in GaSb dots causing the photoluminescence peak to be continuously blueshifted from 0.76 eV by {approx}30 meV when the base length of the dots decreases from 100 to 17 nm.

36 MATERIALS SCIENCE↗

Low energy Ar{sup +} sputtering-induced GaAs quantum dot formation and evolution

GaAs quantum dots formed by Ar{sup +} bombardment under normal beam incidence are investigated in both sputtering time and energy domains. When ion energy is maintained at 1000 eV, the surface morphology is found to saturate with high dot uniformity at 3600 s sputtering time. For longer sputtering times, the surface pattern becomes significantly disordered with fluctuations of approx28 and approx24 nm in dot height and base width, respectively. The temporal evolution of dots formed at lower ion energies exhibits a similar trend, as observed at 1000 eV. However, the surface morphology develops in a smaller size scale. Based on the experimental results, we propose a power law model to interpret the correlation between sputtering time and energy as well as their impact on the evolution of lateral dot sizes. The experimental results are in good agreement with the theoretical prediction. Furthermore, photoluminescence is performed to characterize the as-grown and annealed GaAs/AlGaAs quantum dots formed by ion sputtering and molecular beam epitaxy. A significant improvement in the integrated photoluminescence signal has been obtained after thermal annealing, indicating that the potential nonradiative defects can be effectively removed by postgrowth annealing of the sputtering-induced GaAs quantum dot system.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Metamorphic quantum dots: Quite different nanostructures

In this work, we present a study of InAs quantum dots deposited on InGaAs metamorphic buffers by molecular beam epitaxy. By comparing morphological, structural, and optical properties of such nanostructures with those of InAs/GaAs quantum dot ones, we were able to evidence characteristics that are typical of metamorphic InAs/InGaAs structures. The more relevant are: the cross-hatched InGaAs surface overgrown by dots, the change in critical coverages for island nucleation and ripening, the nucleation of new defects in the capping layers, and the redshift in the emission energy. The discussion on experimental results allowed us to conclude that metamorphic InAs/InGaAs quantum dots are rather different nanostructures, where attention must be put to some issues not present in InAs/GaAs structures, namely, buffer-related defects, surface morphology, different dislocation mobility, and stacking fault energies. On the other hand, we show that metamorphic quantum dot nanostructures can provide new possibilities of tailoring various properties, such as dot positioning and emission energy, that could be very useful for innovative dot-based devices.

36 MATERIALS SCIENCE↗

Effect of proton bombardment on InAs dots and wetting layer in laser structures

The effect of proton bombardment on carrier lifetime and photoluminescence of InAs quantum dots was measured. Optical absorption and transmission electron microscopy show the dots retain their integrity under bombardment. A decrease in ground state photoluminescence with increasing dose is not explained by the decrease in dot carrier lifetime alone, but also by bombardment-induced non-radiative recombination in the wetting layer, which reduces the dot electron population at fixed excitation. To exploit the relative radiation immunity of quantum dots, it is necessary to maximise the dot density and capture probability per dot to minimize the effect of wetting layer recombination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A theoretical analysis of the optical absorption properties in one-dimensional InAs/GaAs quantum dot superlattices

We present theoretical investigations of miniband structures and optical properties of InAs/GaAs one-dimensional quantum dot superlattices (1D-QDSLs). The calculation is based on the multi-band k·p theory, including the conduction and valence band mixing effects, the strain effect, and the piezoelectric effect; all three effects have periodic boundary conditions. We find that both the electronic and optical properties of the 1D-QDSLs show unique states which are different from those of well known single quantum dots (QDs) or quantum wires. We predict that the optical absorption spectra of the 1D-QDSLs strongly depend on the inter-dot spacing because of the inter-dot carrier coupling and changing strain states, which strongly influence the conduction and valence band potentials. The inter-miniband transitions form the absorption bands. Those absorption bands can be tuned from almost continuous (closely stacked QD case) to spike-like shape (almost isolated QD case) by changing the inter-dot spacing. The polarization of the lowest absorption peak for the 1D-QDSLs changes from being parallel to the stacking direction to being perpendicular to the stacking direction as the inter-dot spacing increases. In the case of closely stacked QDs, in-plane anisotropy, especially [110] and [11{sup ¯}0] directions also depend on the inter-dot spacing. Our findings and predictions will provide an additional degree of freedom for the design of QD-based optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coherent radiation by quantum dots and magnetic nanoclusters

The assemblies of either quantum dots or magnetic nanoclusters are studied. It is shown that such assemblies can produce coherent radiation. A method is developed for solving the systems of nonlinear equations describing the dynamics of such assemblies. The method is shown to be general and applicable to systems of different physical nature. Despite mathematical similarities of dynamical equations, the physics of the processes for quantum dots and magnetic nanoclusters is rather different. In a quantum dot assembly, coherence develops due to the Dicke effect of dot interactions through the common radiation field. For a system of magnetic clusters, coherence in the spin motion appears due to the Purcell effect caused by the feedback action of a resonator. Self-organized coherent spin radiation cannot arise without a resonator. This principal difference is connected with the different physical nature of dipole forces between the objects. Effective dipole interactions between the radiating quantum dots, appearing due to photon exchange, collectivize the dot radiation. While the dipolar spin interactions exist from the beginning, yet before radiation, and on the contrary, they dephase spin motion, thus destroying the coherence of moving spins. In addition, quantum dot radiation exhibits turbulent photon filamentation that is absent for radiating spins.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Resonant electronic transport through a triple quantum-dot with Λ-type level structure under dual radiation fields

Due to quantum interference, light can transmit through dense atomic media, a phenomenon known as electromagnetically induced transparency (EIT). We propose that EIT is not limited to light transmission and there is an electronic analog where resonant transparency in charge transport in an opaque structure can be induced by electromagnetic radiation. A triple-quantum-dots system with Λ-type level structure is generally opaque due to the level in the center dot being significantly higher and therefore hopping from the left dot to the center dot is almost forbidden. We demonstrate that an electromagnetically induced electron transparency (EIET) in charge of transport can indeed occur in the Λ-type system. The direct evidence of EIET is that an electron can travel from the left dot to the right dot, while the center dot apparently becomes invisible. We analyze EIET and the related shot noise in both the zero and strong Coulomb blockade regimes. It is found that the EIET (position, height, and symmetry) can be tuned by several controllable parameters of the radiation fields, such as the Rabi frequencies and detuning frequencies. The result offers a transparency/opaque tuning technique in charge transport using interfering radiation fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Height control of self-assembled quantum dots by strain engineering during capping

Strain engineering during the capping of III-V quantum dots has been explored as a means to control the height of strained self-assembled quantum dots. Results of Kinetic Monte Carlo simulations are confronted with cross-sectional Scanning Tunnel Microscopy (STM) measurements performed on InAs quantum dots grown by molecular beam epitaxy. We studied InAs quantum dots that are capped by In{sub x}Ga{sub (1−x)}As layers of different indium compositions. Both from our realistic 3D kinetic Monte Carlo simulations and the X-STM measurements on real samples, a trend in the height of the capped quantum dot is found as a function of the lattice mismatch between the quantum dot material and the capping layer. Results obtained on additional material combinations show a generic role of the elastic energy in the control of the quantum dot morphology by strain engineering during capping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suppression of low-frequency charge noise in gates-defined GaAs quantum dots

To reduce the charge noise of a modulation-doped GaAs/AlGaAs quantum dot, we have fabricated shallow-etched GaAs/AlGaAs quantum dots using the wet-etching method to study the effects of two-dimensional electron gas (2DEG) underneath the metallic gates. The low-frequency 1/f noise in the Coulomb blockade region of the shallow-etched quantum dot is compared with a non-etched quantum dot on the same wafer. The average values of the gate noise are approximately 0.5 μeV in the shallow-etched quantum dot and 3 μeV in the regular quantum dot. Our results show the quantum dot low-frequency charge noise can be suppressed by the removal of the 2DEG underneath the metallic gates, which provides an architecture for noise reduction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Luminescence of Quantum Dots by Coupling with Nonradiative Surface Plasmon Modes in a Scanning Tunneling Microscope

The electronic coupling between quantum dots (QDs) and surface plasmons (SPs) is investigated by a luminescence spectroscopy based on scanning tunneling microscopy (STM). We show that tunneling luminescence from the dot is excited by coupling with the nonradiative plasmon mode oscillating at the metallic tunneling gap formed during the STM operation. This approach to the SP excitation reveals aspects of the SP-QD coupling not accessible to the more conventional optical excitation of SPs. In the STM, luminescence from the dot is observed when and only when the SP is in resonance with the fundamental transition of the dot. The tunneling luminescence spectrum also suggests that excited SP-QD hybrid states can participate in the excitation of QD luminescence. Not only the SP excitation regulates the QD luminescence but the presence of the dot at the tunneling gap imposes restrictions to the SP that can be excited in the STM, in which the SP cannot exceed the energy of the fundamental transition of the dot. The superior SP-QD coupling observed in the STM is due to the tunneling gap acting as a tunable plasmonic resonator in which the dot is fully immersed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Effect of Ligands and Solvents on Nonradiative Transitions in Semiconductor Quantum Dots (A Review)

Data on quantum yields and photoluminescence decay times of quantum dots have been collected. Photoprocesses that occur in quantum dots are compared with photoprocesses occurring in complex organic molecules in the condensed phase. The review consists of the introduction, three parts, and conclusions. The first two parts are devoted to quantum dots that are formed by indirect-gap semiconductors. The first part is devoted to data on the photoluminescence quantum yields and decay times of carbon quantum dots, and Table 1 presents selected values and short comments to these data. Table 2 of the same part presents data on fast relaxation processes in the same objects. In the second part, Tables 3 and 4, as well as the following text, contain similar information about silicon quantum dots. Data on photoprocesses in quantum dots formed by direct-gap semiconductors are collected in the third part. Data on the photoluminescence yields, decay times, and relaxation processes are listed in Tables 5 and 6. Particular attention in the present review is given to the effect that a change in the frequency of vibrations in the environment of a quantum dot has on the photoluminescence yields and the rate of relaxation processes between electronic levels in bands, which indicates that the inductive resonance mechanism of nonradiative transitions is applicable to these systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of conjugation with biomolecules on photoluminescence and structural characteristics of CdSe/ZnS quantum dots

The photoluminescence and photoluminescence excitation spectra, the X-ray diffraction patterns, and the effect of conjugation with biomolecules upon these characteristics are studied for silanized CdSe/ZnS quantum dots. Along with the band of annihilating excitons in the quantum dots, the luminescence spectra exhibit emission associated with defects. It is established that the emission spectrum of defects involves at least two components. It is shown that the defects are located mainly at the small-sized quantum dots; the defects responsible for the long-wavelength component are located mainly at the quantum dots larger in size than the quantum dots, at which the defects responsible for the short-wavelength component are located. It is found that conjugation with biomolecules induces not only the blue shift of the excitonic band, but transformation of the emission spectra of defects and an increase in the contribution of defects to the luminescence spectrum as well. The changes observed in the emission spectrum of defects are attributed to the formation of certain emission centers. It is shown that, when conjugated with biomolecules, the quantum dots experience increasing compression strains. This effect is responsible for the blue shift of the luminescence band of the quantum dots.

36 MATERIALS SCIENCE↗

Emission spectra of a laser based on an In(Ga)As/GaAs quantum-dot superlattice

The spectral characteristics of a laser with an active region based on a ten-layer system of In(Ga)As/GaAs vertically correlated quantum dots with 4.5-nm GaAs spacer layers between InAs quantum dots are studied under the conditions of spontaneous and stimulated emission, depending on the current and the duration of pump pulses. Data obtained by transmission electron microscopy and electroluminescence and absorption polarization anisotropy measurements make it possible to demonstrate that the investigated system of tunnel-coupled InAs quantum dots separated by thin GaAs barriers represents a quantum-dot superlattice. With an increase in the laser pump current, the electroluminescence intensity increases linearly and the spectral position of the electroluminescence maximum shifts to higher energies, which is caused by the dependence of the miniband density-of-states distribution on the pump current. Upon exceeding the threshold current, multimode lasing via the miniband ground state is observed. One of the lasing modes can be attributed to the zero-phonon line, and the other is determined by the longitudinal-optical phonon replica of quantum-dot emission. The results obtained give evidence that, under conditions of the laser pumping of an In(Ga)As/GaAs quantum-dot superlattice, strong coupling between the discrete electron states in the miniband and optical phonons takes place. This leads to the formation of quantum-dot polarons, resulting from the resonant mixing of electronic states whose energy separation is comparable to the optical-phonon energy.

36 MATERIALS SCIENCE↗

Using quantum dots to tag subsurface damage in lapped and polished glass samples

Grinding, lapping, and polishing are finishing processes used to achieve critical surface parameters in a variety of precision optical and electronic components. As these processes remove material from the surface through mechanical and chemical interactions, they may induce a damaged layer of cracks, voids, and stressed material below the surface. This subsurface damage (SSD) can degrade the performance of a final product by creating optical aberrations due to diffraction, premature failure in oscillating components, and a reduction in the laser induced damage threshold of high energy optics. As these defects lie beneath the surface, they are difficult to detect, and while many methods are available to detect SSD, they can have notable limitations regarding sample size and type, preparation time, or can be destructive in nature. The authors tested a nondestructive method for assessing SSD that consisted of tagging the abrasive slurries used in lapping and polishing with quantum dots (nano-sized fluorescent particles). Subsequent detection of fluorescence on the processed surface is hypothesized to indicate SSD. Quantum dots that were introduced to glass surfaces during the lapping process were retained through subsequent polishing and cleaning processes. The quantum dots were successfully imaged by both wide field and confocal fluorescence microscopy techniques. The detected fluorescence highlighted features that were not observable with optical or interferometric microscopy. Atomic force microscopy and additional confocal microscope analysis indicate that the dots are firmly embedded in the surface but do not appear to travel deep into fractures beneath the surface. Etching of the samples exhibiting fluorescence confirmed that SSD existed. SSD-free samples exposed to quantum dots did not retain the dots in their surfaces, even when polished in the presence of quantum dots.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗