Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DECOUPLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Decoupling optical and electronic optimization of organic solar cells using high-performance temperature-stable TiO{sub 2}/Ag/TiO{sub 2} electrodes

An electrode structured with a TiO{sub 2}/Ag/TiO{sub 2} (TAT) multilayer as indium tin oxide (ITO) replacement with a superior thermal stability has been successfully fabricated. This electrode allows to directly tune the optical cavity mode towards maximized photocurrent generation by varying the thickness of the layers in the sandwich structure. This enables tailored optimization of the transparent electrode for different organic thin film photovoltaics without alteration of their electro-optical properties. Organic photovoltaic featuring our TAT multilayer shows an improvement of ∼12% over the ITO reference and allows power conversion efficiencies (PCEs) up to 8.7% in PTB7:PC{sub 71}BM devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Long-lived polaritonic coherence and polaron decoupling effects in 2D electronic spectra

Molecular polaritons, formed by coupling molecular excitons with cavity photons, offer a promising platform for exploring quantum phenomena. A key challenge is understanding how these hybrid states maintain coherence in the presence of environmental vibrations. Here, we show theoretically that collective coupling of many molecular excitons in a cavity can protect polariton coherence from phonon-induced decoherence. Under realistic conditions, the coherence time can extend up to 200 fs at room temperature, compared with 15 fs for typical molecular systems. Simulations of two-dimensional electronic spectra reveal prolonged oscillations between upper and lower polariton states, and reduced vibrational coupling as indicated by changes in the nodal line slope of the lower polariton peak. These findings provide guidance for experimental efforts to realize long-lived polaritons, such as coupling CdSe nanoplatelets to optical cavities.

2D electronic spectroscopy↗
DOE OSTI2016

Model predictive direct power control for active power decoupled single-phase quasi- Z -source inverter

In this study, the active power filter (APF) that consists of a half-bridge leg and an ac capacitor is integrated in the single-phase quasi-Z-source inverter (qZSI) in this paper to avoid the second harmonic power flowing into the dc side. The capacitor of APF buffers the second harmonic power of the load, and the ac capacitor allows highly pulsating ac voltage, so that the capacitances of both dc and ac sides can be small. A model predictive direct power control (DPC) is further proposed to achieve the purpose of this newtopology through predicting the capacitor voltage of APF at each sampling period and ensuring the APF power to track the second harmonic power of single-phase qZSI. Simulation and experimental results verify the model predictive DPC for the APF-integrated single-phase qZSI.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Decoupling Complex Multi–Length–Scale Morphology in Non–Fullerene Photovoltaics with Nitrogen K–Edge Resonant Soft X–ray Scattering

Complex morphology in organic photovoltaics (OPVs) and other functional soft materials commonly dictates performance. Such complexity in OPVs originates from the mesoscale kinetically trapped non-equilibrium state, which governs device charge generation and transport. Resonant soft X-ray scattering (RSoXS) has been revolutionary in the exploration of OPV morphology in the past decade due to its chemical and orientation sensitivity. However, for non-fullerene OPVs, RSoXS analysis near the carbon K-edge is challenging, due to the chemical similarity of the materials used in active layers. Here, an innovative approach is provided by nitrogen K-edge RSoXS (NK-RSoXS), utilizing the spatial and orientational contrasts from the cyano groups in the acceptor materials, which allows for determination of phase separation. NK-RSoXS clearly visualizes the combined feature sizes in PM6:Y6 blends from crystallization and liquid-liquid demixing, while PM6:Y6:Y6-BO ternary blends with reduced phase-separation size and enhanced material crystallization can lead to current amplification in devices. Nitrogen is common in organic semiconductors and other soft materials, and the strong and directional N 1s → π* resonances make NK-RSoXS a powerful tool to uncover the mesoscale complexity and open opportunities to understand heterogeneous systems.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Brazed Carbon Nanotube Arrays: Decoupling Thermal Conductance and Mechanical Rigidity

Bonding two solids at their interface is the most effective way to achieve a mechanically robust and thermally conducting interface. However, for high‐temperature applications, bonded interfaces between dissimilar materials experience high thermomechanical stress that degrades their performance in terms of cyclic stability (under thermal load) and lifetime. The present study shows that integrating a carbon nanotube (CNT) array as a stress‐relief element to a traditional braze joint mitigates the adverse effects of thermomechanical stress while preserving mechanical robustness and excellent heat transfer characteristic at the interface. A substantial reduction in total thermal interface resistance is achieved (from 41 mm 2 K W −1 for bare CNT array to less than 3 mm 2 K W −1 for a CNT array integrated with braze alloy). A brazed metal/insulator interface (between Cu and quartz) with a CNT array between them exhibits low thermal interface resistance even after extreme thermal cycling whereas the same interface delaminates readily when brazed without a CNT array. The reported technique provides a promising route for substantially improving the problematic high‐temperature interface, a major hindrance in achieving stable and efficient operation for systems such as thermoelectric generators that operate at elevated temperatures (above 400 °C).

Hao, Menglong↗
DOE OSTI2022

Heterogeneous isotope effects decouple conifer leaf and branch sugar δ 18 O and δ 13 C

Isotope ratios of tree-ring cellulose are a prominent tool to reconstruct paleoclimate and plant responses to environmental variation. Current models for cellulose isotope ratios assume a transfer of the environmental signals recorded in bulk leaf water to carbohydrates and ultimately into stem cellulose. However, the isotopic signal of carbohydrates exported from leaf to branch may deviate from mean leaf values if spatial heterogeneity in isotope ratios exists in the leaf. We tested whether the isotopic heterogeneity previously observed along the length of a ponderosa pine (Pinus ponderosa) leaf water was preserved in photosynthetic products. We observed an increase in both sugar and bulk tissue δ 18 O values along the needle, but the increase in carbohydrate δ 18 O values was dampened relative to the trend observed in leaf water. In contrast, δ 13 C values of both sugar and bulk organic matter were invariant along the needle. Additionally, phloem-exported sugar measured in the branch below the needles did not match whole-needle values of δ 18 O or δ 13 C. Instead, there was a near-constant offset observed between the branch and needle sugar δ 13 C values, while branch δ 18 O values were most similar to δ 18 O values observed for sugar at the base of the needle. The observed offset between the branch and needle sugar δ 18 O values likely arises from partial isotope oxygen exchange between sugars and water during phloem loading and transport. An improved understanding of the conditions producing differential δ 13 C and δ 18 O isotope effects between branch phloem and needle sugars could improve tree-ring-based climate reconstructions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Decoupling size and surface effects of intermetallic CuPd nanocrystals for electrocatalytic nitrate reduction to ammonia

Nitrate pollution poses a major environmental challenge, but its electrochemical conversion to ammonia offers a sustainable waste-to-value solution. Here, in this study, we synthesized monodisperse, size-tunable B2-phase CuPd intermetallic nanocrystals (6–46 nm) and studied their performance in the electrochemical nitrate reduction reaction (eNO 3 RR). By using bromide ions to modulate Pd reduction and applying mild annealing, we achieved phase-pure B2 structures across all sizes. Catalytic testing revealed a volcano-like trend in ammonia yield, peaking at 33 nm nanocubes with a rate of 6.97 mol h −1 g −1 at −0.6 V vs. reversible hydrogen electrode (RHE). This optimum reflects a balance between the increased surface area of smaller particles and the enhanced exposure of active (100) facets in larger ones. Theoretical calculations indicated that the B2-CuPd (100) facet is favorable for nitrate adsorption, thereby supporting the high activity of nanocubes. Our results highlight the critical role of tuning both nanoparticle size and surface structure to maximize eNO 3 RR efficiency.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Decoupling of particles and dissolved iron downstream of Greenlandic glacier outflows

Glaciers can be a significant and locally dominant source of iron (Fe), a biologically essential micronutrient, in high latitude coastal seas. The vast majority of this glacial Fe delivery is associated with particles, yet the speciation of the solid-phase Fe and specifically the relationships that govern exchange between particulate and dissolved Fe phases in these environments are poorly described. Here, in this work, we performed measurements of in situ dissolved Fe (dFe) along meltwater and particle plumes in three transects around Disko Bay and Ameralik Fjord (West Greenland). Measurements of dFe were combined with Fe K-edge X-ray absorption spectroscopy analysis of ~40 suspended sediment samples obtained from the same transects and from select depth profiles down to 300 m. We observed relatively constant dFe levels (4 to 10 nM for nearly all dFe measurements) across fjords with widely varying particulate Fe(II) contents (from 20 to 90% Fe(II)), indicating that dFe concentrations had little dependence on the oxidation state of Fe in the suspended sediment. Particulate Fe data were grouped by underlying bedrock geology, with suspended sediment consisting of 80-90% biotite-like Fe(II) in fjords with Precambrian shield geology and poorly-ordered Fe(III) particles (<20-30% Fe(II)) in one fjord with suspended sediments derived from tertiary basalts. Our characterization data indicated no significant change in the average Fe oxidation state and bonding environment of particles along the fjord transects, implying that Fe(II) in biotite-like coordination is not a readily labile Fe form on this spatial scale. Finally, our results suggest that dFe in these glacially-modified coastal waters is buffered at a relatively constant low nM concentration due to factors other than particle Fe mineralogy and that glacier-derived Fe phases are relatively inert on this spatial scale.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Single Stage PLL-less Decoupled Active and Reactive Power Control for Weak Grid Interactive Inverters

This paper presents a single stage phase locked loop-less (PLL-less) active and reactive power (PQ) control for single-phase weak grid interactive inverters. The absence of the PLL requirement in the proposed PQ control enhances the stability margin comparing to conventional current control approaches in both the stationary or the synchronous reference frame. Additionally, the proposed control scheme enables direct PQ control with a single loop control structure. This paper demonstrates that the proposed PLL-less PQ control scheme is asymptotically stable if the controller gains are positive. The necessary conditions for supplying the rated active power into the weak grid are derived. The provided analysis shows that certain amount of reactive power injection is necessary to avoid point of common coupling (PCC) voltage collapse when the rated active power is injected into the weak grid. Several case studies are provided to demonstrate the performance of the proposed PLL-less PQ control scheme under weak grid condition.

Khan, Ahmad↗
DOE OSTI2022

Cholesterol-induced suppression of Kir2 channels is mediated by decoupling at the inter-subunit interfaces

Cholesterol is a major regulator of multiple types of ion channels. Although there is increasing information about cholesterol binding sites, the molecular mechanisms through which cholesterol binding alters channel function are virtually unknown. In this study, we used a combination of Martini coarse-grained simulations, a network theory-based analysis, and electrophysiology to determine the effect of cholesterol on the dynamic structure of the Kir2.2 channel. We found that increasing membrane cholesterol reduced the likelihood of contact between specific regions of the cytoplasmic and transmembrane domains of the channel, most prominently at the subunit-subunit interfaces of the cytosolic domains. This decrease in contact was mediated by pairwise interactions of specific residues and correlated to the stoichiometry of cholesterol binding events. The predictions of the model were tested by site-directed mutagenesis of two identified residues—V265 and H222—and high throughput electrophysiology.

59 BASIC BIOLOGICAL SCIENCES↗