Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DECOMPRESSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Simultaneous compression of NaCl, Au, and ruby: toward mutually consistent pressure scales

Here, we evaluate pressure consistency of equations of state (EOS) for NaCl and Au at 300 K. The simultaneous measurements of unit-cell volumes (V) with ruby R1 line shifts (Δλ) in a helium (He) loaded diamond cell effectively remove potential systematic errors. Compression and decompression data were automatically collected at 1 sec interval, yielding a dense dataset with >8,000 (V, Δλ) pairs each for NaCl and Au. Solidification of He has noticeable effects on both V and Delta lambda (hence P). Only data up to similar to 14 GPa, or 6000 (V, P) pairs, can be considered hydrostatic within the resolution. The P-V data are fitted to the Rydberg-Vinet and the 3 rd order Birch-Murnaghan EOS. Predicted pressures of these EOSs agree with those given by the Ruby2020 ruby scale to within +/- 0.05 GPa. Overall, pressures predicted by the Rydberg-Vinet EOS are in better agreement with the average of commonly used NaCl and Au pressure scales.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

GEODYNAMICS AND RATE OF VOLCANISM ON MASSIVE EARTH-LIKE PLANETS

We provide estimates of volcanism versus time for planets with Earth-like composition and masses 0.25-25 M {sub +}, as a step toward predicting atmospheric mass on extrasolar rocky planets. Volcanism requires melting of the silicate mantle. We use a thermal evolution model, calibrated against Earth, in combination with standard melting models, to explore the dependence of convection-driven decompression mantle melting on planet mass. We show that (1) volcanism is likely to proceed on massive planets with plate tectonics over the main-sequence lifetime of the parent star; (2) crustal thickness (and melting rate normalized to planet mass) is weakly dependent on planet mass; (3) stagnant lid planets live fast (they have higher rates of melting than their plate tectonic counterparts early in their thermal evolution), but die young (melting shuts down after a few Gyr); (4) plate tectonics may not operate on high-mass planets because of the production of buoyant crust which is difficult to subduct; and (5) melting is necessary but insufficient for efficient volcanic degassing-volatiles partition into the earliest, deepest melts, which may be denser than the residue and sink to the base of the mantle on young, massive planets. Magma must also crystallize at or near the surface, and the pressure of overlying volatiles must be fairly low, if volatiles are to reach the surface. If volcanism is detected in the 10 Gyr-old {tau} Ceti system, and tidal forcing can be shown to be weak, this would be evidence for plate tectonics.

99 GENERAL AND MISCELLANEOUS↗

Particle energization during solar maximum: Diffusive shock acceleration at multiple shocks

We present a model for the acceleration of particles at multiple shocks using an approach related to box models. A distribution of particles is diffusively accelerated inside the box while simultaneously experiencing decompression through adiabatic expansion and losses from the convection and diffusion of particles out of the box by either the method used in Melrose and Pope and Pope and Melrose or by the approach introduced in Zank et al. where we solve the transport equation by a method analogous to operator splitting. The second method incorporates the additional loss terms of convection and diffusion and allows for the use of a variable time between shocks. We use a maximum injection energy (E{sub max}) appropriate for quasi-parallel and quasi-perpendicular shocks. We provide a preliminary application of the diffusive acceleration of particles by multiple shocks with frequencies appropriate for solar maximum.

79 ASTRONOMY AND ASTROPHYSICS↗

Absorption filaments toward the massive clump G0.253+0.016

ALMA HCO{sup +} observations of the infrared dark cloud G0.253+0.016 located in the central molecular zone of the Galaxy are presented. The 89 GHz emission is area-filling, optically thick, and sub-thermally excited. Two types of filaments are seen in absorption against the HCO{sup +} emission. Broad-line absorption filaments (BLAs) have widths of less than a few arcseconds (0.07-0.14 pc), lengths of 30-50 arcsec (1.2-1.8 pc), and absorption profiles extending over a velocity range larger than 20 km s{sup –1}. The BLAs are nearly parallel to the nearby G0.18 non-thermal filaments and may trace HCO{sup +} molecules gyrating about highly ordered magnetic fields located in front of G0.253+0.016 or edge-on sheets formed behind supersonic shocks propagating orthogonal to our line of sight in the foreground. Narrow-line absorption filaments (NLAs) have line widths less than 20 km s{sup –1}. Some NLAs are also seen in absorption in other species with high optical depth, such as HCN, and occasionally in emission where the background is faint. The NLAs, which also trace low-density, sub-thermally excited HCO{sup +} molecules, are mostly seen on the blueshifted side of the emission from G0.253+0.016. If associated with the surface of G0.253+0.016, the kinematics of the NLAs indicate that the cloud surface is expanding. The decompression of entrained, milli-Gauss magnetic fields may be responsible for the re-expansion of the surface layers of G0.253+0.016 as it recedes from the Galactic center following a close encounter with Sgr A.

79 ASTRONOMY AND ASTROPHYSICS↗

The phase diagram of Ti-6Al-4V at high-pressures and high-temperatures

We report results from a series of diamond-anvil-cell synchrotron x-ray diffraction and large-volume-press experiments, and calculations, to investigate the phase diagram of commercial polycrystalline high-strength Ti-6Al-4V alloy in pressure–temperature space. Up to ~30 GPa and 886 K, Ti-6Al-4V is found to be stable in the hexagonal-close-packed, or α phase. The effect of temperature on the volume expansion and compressibility of α–Ti-6Al-4V is modest. The martensitic α → ω (hexagonal) transition occurs at ~30 GPa, with both phases coexisting until at ~38–40 GPa the transition to the ω phase is completed. Between 300 K and 844 K the α → ω transition appears to be independent of temperature. ω–Ti-6Al-4V is stable to ~91 GPa and 844 K, the highest combined pressure and temperature reached in these experiments. Pressure–volume–temperature equations-of-state for the α and ω phases of Ti-6Al-4V are generated and found to be similar to pure Ti. A pronounced hysteresis is observed in the ω–Ti-6Al-4V on decompression, with the hexagonal structure reverting back to the α phase at pressures below ~9 GPa at room temperature, and at a higher pressure at elevated temperatures. Based on our data, we estimate the Ti-6Al-4V α–β–ω triple point to occur at ~900 K and 30 GPa, in good agreement with our calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fish Passage though Hydropower Turbines: Simulating Blade Strike using the Discrete Element Method

mong the hazardous hydraulic conditions affecting anadromous and resident fish during their passage though turbine flows, two are believed to cause considerable injury and mortality: collision on moving blades and decompression. Several methods are currently available to evaluate these stressors in installed turbines, i.e. using live fish or autonomous sensor devices, and in reduced-scale physical models, i.e. registering collisions from plastic beads. However, a priori estimates with computational modeling approaches applied early in the process of turbine design can facilitate the development of fish-friendly turbines. In the present study, we evaluated the frequency of blade strike and nadir pressure environment by modeling potential fish trajectories with the Discrete Element Method (DEM) applied to fish-like composite particles. In the DEM approach, particles are subjected to realistic hydraulic conditions simulated with computational fluid dynamics (CFD), and particle-structure interactions—representing fish collisions with turbine blades—are explicitly recorded and accounted for in the calculation of particle trajectories. We conducted transient CFD simulations by setting the runner in motion and allowing for better turbulence resolution, a modeling improvement over the conventional practice of simulating the system in steady state which was also done here. While both schemes yielded comparable bulk hydraulic performance, transient conditions exhibited a visual improvement in describing flow variability. We released streamtraces (steady flow solution) and DEM particles (transient solution) at the same location from where sensor fish (SF) have been released in field studies of the modeled turbine unit. The streamtrace-based results showed a better agreement with SF data than the DEM-based nadir pressures did because the former accounted for the turbulent dispersion at the intake but the latter did not. However, the DEM-based strike frequency is more representative of blade-strike probability than the steady solution is, mainly because DEM particles accounted for the full fish length, thus resolving (instead of modeling) the collision event.

CFD↗

r-PROCESS NUCLEOSYNTHESIS IN DYNAMICALLY EJECTED MATTER OF NEUTRON STAR MERGERS

Although the rapid neutron-capture process, or r-process, is fundamentally important for explaining the origin of approximately half of the stable nuclei with A > 60, the astrophysical site of this process has not been identified yet. Here we study r-process nucleosynthesis in material that is dynamically ejected by tidal and pressure forces during the merging of binary neutron stars (NSs) and within milliseconds afterward. For the first time we make use of relativistic hydrodynamical simulations of such events, defining consistently the conditions that determine the nucleosynthesis, i.e., neutron enrichment, entropy, early density evolution and thus expansion timescale, and ejecta mass. We find that 10{sup -3}-10{sup -2} M{sub sun} are ejected, which is enough for mergers to be the main source of heavy (A {approx}> 140) galactic r-nuclei for merger rates of some 10{sup -5} yr{sup -1}. While asymmetric mergers eject 2-3 times more mass than symmetric ones, the exact amount depends weakly on whether the NSs have radii of {approx}15 km for a 'stiff' nuclear equation of state (EOS) or {approx}12 km for a 'soft' EOS. r-process nucleosynthesis during the decompression becomes largely insensitive to the detailed conditions because of efficient fission recycling, producing a composition that closely follows the solar r-abundance distribution for nuclei with mass numbers A > 140. Estimating the light curve powered by the radioactive decay heating of r-process nuclei with an approximative model, we expect high emission in the B-V-R bands for 1-2 days with potentially observable longer duration in the case of asymmetric mergers because of the larger ejecta mass.

79 ASTRONOMY AND ASTROPHYSICS↗

In situ compression artifact removal in scientific data using deep transfer learning and experience replay

The massive amount of data produced during simulation on high-performance computers has grown exponentially over the past decade, exacerbating the need for streaming compression and decompression methods for efficient storage and transfer of this data---key to realizing the full potential of large-scale computational science. Lossy compression approaches such as JPEG when applied to scientific simulation data realized as a stream of images can achieve good compression rates but at the cost of introducing compression artifacts and loss of information. This paper develops a unified framework for in situ compression artifact removal in which the fully convolutional neural network architectures are combined with scalable training, transfer learning, and experience replay to achieve superior accuracy and efficiency while significantly decreasing the storage footprint as compared with the traditional optimization-based approaches. We demonstrate the proposed approach and compare it with compressed sensing postprocessing and other baseline deep learning models using climate simulations and nuclear reactor simulations, both of which are driven by hyperbolic partial differential equations. Our approach when applied to remove the compression artifacts on the JPEG-compressed nuclear reactor simulation data (using a transfer-trained model that was pretrained on the climate simulation data and updated incrementally as the nuclear reactor simulation progressed), achieved a significant improvement---mean peak signal-to-noise ratio of 42.438 as compared with 27.725 obtained with the compressed sensing approach.

97 MATHEMATICS AND COMPUTING↗

Broom: application for non-redundant storage of high throughput sequencing data

Abstract Motivation The data generation capabilities of high throughput sequencing (HTS) instruments have exponentially increased over the last few years, while the cost of sequencing has dramatically decreased allowing this technology to become widely used in biomedical studies. For small labs and individual researchers, however, storage and transfer of large amounts of HTS data present a significant challenge. The recent trends in increased sequencing quality and genome coverage can be used to reconsider HTS data storage strategies. Results We present Broom, a stand-alone application designed to select and store only high-quality sequencing reads at extremely high compression rates. Written in C++, the application accepts single and paired-end reads in FASTQ and FASTA formats and decompresses data in FASTA format. Availability and implementation C++ code available at https://scsb.utmb.edu/labgroups/fofanov/broom.asp. Supplementary information Supplementary data are available at Bioinformatics online.

Albayrak, Levent↗

Li-ion battery material under high pressure: amorphization and enhanced conductivity of Li 4 Ti 5 O 12

Lithium titanium oxide (Li 4 Ti 5 O 12 , LTO), a 'zero-strain' anode material for lithium-ion batteries, exhibits excellent cycling performance. However, its poor conductivity highly limits its applications. Here, the structural stability and conductivity of LTO were studied using in situ high-pressure measurements and first-principles calculations. LTO underwent a pressure-induced amorphization (PIA) at 26.9 GPa. The impedance spectroscopy revealed that the conductivity of LTO improved significantly after amorphization and that the conductivity of decompressed amorphous LTO increased by an order of magnitude compared with its starting phase. Furthermore, our calculations demonstrated that the different compressibility of the LiO 6 and TiO 6 octahedra in the structure was crucial for the PIA. The amorphous phase promotes Li + diffusion and enhances its ionic conductivity by providing defects for ion migration. Our results not only provide an insight into the pressure depended structural properties of a spinel-like material, but also facilitate exploration of the interplay between PIA and conductivity.

25 ENERGY STORAGE↗

Using eclogite retrogression to track the rapid exhumation of the Pliocene Papua New Guinea UHP Terrane

The D’Entrecasteaux Islands of eastern Papua New Guinea (PNG) host the youngest known ultrahigh-pressure terrane on Earth and represent the only location where ultrahigh-pressure (UHP) rocks have been exhumed in an active rift. The PNG (U)HP rocks, consisting of Pliocene eclogites, garnet amphibolites and migmatitic gneisses, are exposed in five domal structures across the Islands. Zirconium-in-rutile thermometry records peak temperatures of ~780°C from the eastern Oiatabu and nearby central Mailolo Domes, and hotter temperatures of ~825–865°C within the western Goodenough Dome. Uranium–lead (U–Pb) and trace element zircon compositions from a suite of eclogite, host gneiss, felsic dikes and pegmatite from three domes document the rapid exhumation history of the PNG UHP terrane. High-spatial resolution laser-ablation split-stream inductively coupled plasma-mass spectrometry (LASS ICP-MS) analyses of select eclogite zircons exhibit no resolvable age zoning within single crystals. The same eclogite zircons, combined with separate zircons extracted from additional eclogite, host gneiss and felsic intrusions, were subsequently analysed by high-precision U–Pb chemical-abrasion isotope-dilution thermal ionization mass spectrometry and solution ICP-MS trace element analysis (TIMS-TEA). The results record discrete tectonic events across the three domes at sub-million year timescales: (1) (re)crystallization of host gneiss within the lower crust exposed in the eastern Oiatabu Dome from c.5·7–4·5 Ma; (2) initial retrogression and local decompression melting of eclogites from the Oiatabu and Mailolo Domes at c.4·6–4·3 Ma; (3) melt crystallization of weakly deformed felsic dikes of the Oiatabu Dome at c.3·0–2·9 Ma; and (4) retrogression and melt crystallization within eclogite–amphibolite-facies rocks in the western Goodenough Dome at c.2·9–2·6 Ma. In comparison to Zr-in-rutile peak temperature estimates, Ti-in-zircon temperatures >800°C may reflect increased temperatures during exhumation that resulted in partial melting of the eclogites. Inclusions of crystallized hydrous melt consisting of Na-rich plagioclase ± K-feldspar + quartz within eclogite zircons document this process. The elevated temperatures and the presence of the polyphase inclusions are the first documentation of partial melting of the (U)HP eclogites within PNG during initial retrogression from c.4·6–4·3 Ma. Finally, overall, U–Pb zircon geochronology and geochemistry track both the timing of retrogressive overprinting within the lower-to-middle crust and final upper crustal emplacement over a relatively short span of ~2 Myr during the rapid (≥2·3 cm/yr) exhumation of the youngest known (U)HP eclogites.

58 GEOSCIENCES↗

Experimental observations of large changes in electron density distributions in β - Ge

We report the electron density distributions in β-Ge have been experimentally determined at in situ high-pressure conditions using synchrotron diffraction techniques in a diamond anvil cell. Upon decompression, the electron density along the $c$ axis in tetragonal β-Ge displays a sudden drop at 10–11 GPa close to that of the structural α-β transition, while the β-Ge samples remain as single crystals until transforming to metastable Ge phases around 6.7–8.5 GPa. In contrast to the covalently bonded α-Ge that displays only a weak participation of $d$ electrons in the valence band under compression above 7.7 GPa, our experimental results suggest that a large change in $d$-orbital participation can occur in the β-Ge lattice which has mixed covalent and metallic bonding. The β-Ge below 10 GPa may display large fluctuations in electronic properties, which sheds light for exploring novel materials with intriguing electronic and optical properties.

36 MATERIALS SCIENCE↗

High-pressure synthesis and thermodynamic stability of PdH 1±ε up to 8 GPa

Palladium hydride alloys are superconductors and hydrogen storage materials. One synthesis route is compression of Pd to high pressure in a hydrogen-rich environment. Here we report the evolution of the unit cell volume of PdH x synthesized by compressing Pd in a pure H 2 medium to pressures from 0.2 to 8 GPa in a diamond anvil cell at room temperature. The volume of the face-centered cubic unit cell changes nonmonotonically with pressure, increasing upon compression from 0.2 to 1 GPa and decreasing upon compression from 1 to 8 GPa. Volume is reversible upon decompression and is independent of whether the sample was heated to 600 K at low pressure (P < 2 GPa). The x-ray diffraction data show no evidence for a phase transition between 0.2 and 8 GPa. The volume maximum at 1 GPa must be caused by progressive hydrogenation from 0 to 1 GPa. Assuming a pressure-volume-composition equation of state derived from previously published data, the [H]:[Pd] ratio in this study increases to a maximum value of x = 1 ± 0.02 at 2 ± 0.5 GPa and remains stable upon further compression to and from 8 GPa. These results add to a mounting body of evidence that PdH 1±ϵ is in thermodynamic equilibrium with pure H 2 at room temperature from 2 GPa to at least 8 GPa. Here, the simplest interpretation is that H atoms occupy all octahedral sites and no tetrahedral sites in face-centered cubic PdH 1.0 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ x-ray diffraction study of dynamically compressed α -cristobalite using a dynamic diamond anvil cell

Here we present results of the dynamic compression of α -cristobalite up to a pressure of 106 GPa with the use of the dynamic diamond anvil cell. X-ray diffraction images were recorded at different ramp compression and decompression rates to investigate in situ the high-pressure phase transitions of α -cristobalite. Our results suggest that the pressure onset of the phase transformation of α -cristobalite to cristobalite II, cristobalite X-I, and ultimately to seifertite ( α – PbO 2 type SiO 2 ) is dependent on the applied compression rates and stress conditions of the experiment. Increasing compression rates in general shift the studied phase transitions to higher pressures. Furthermore, our results indicate for single crystals under hydrostatic conditions a suppression of a phase transition from cristobalite X-I to seifertite at pressures of up to 82 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stability and distortion of fcc LaH 10 with path-integral molecular dynamics

The synthesis of the high-temperature superconductor LaH 10 requires pressures in excess of 100 GPa, wherein it adopts a face-centered cubic structure. Upon decompression, this structure undergoes a distortion, which still supports superconductivity, but with a lower critical temperature. Previous calculations have shown that quantum and anharmonic effects are necessary to stabilize the cubic structure, but have not resolved the low pressure distortion. Using large scale path-integral molecular dynamics enabled by a machine learned potential, we show that a rhombohedral distortion appears at sufficiently low pressures. Here, we also highlight the importance of quantum zero-point motion in stabilizing the cubic structure.

08 HYDROGEN↗

Pressure-induced Phase Transition in BaCrO4

BaCrO{sub 4} was studied to 25 GPa in a diamond-anvil cell using both Raman spectroscopy and x-ray diffraction methods. Our results showed that BaCrO{sub 4} exhibits a phase transition near 9 GPa from both Raman and x-ray diffraction measurements. The new high-pressure phase (BaCrO{sub 4}-II) is suggested as a monoclinic (P2{sub 1}/m) structure, different from other high-pressure forms of ABO{sub 4}-type compounds. Moreover, the high-pressure phase of BaCrO{sub 4} is found to be reversible; the low-pressure phase is recovered at -8 GPa upon decompression. The pressure-volume data of BaCrO{sub 4} fitted to a third-order Birch-Murnaghan equation of state yield a bulk modulus of 53(1) GPa and a pressure derivative of 6.8(5), in agreement with the theoretical prediction. For the high-pressure phase BaCrO{sub 4}-II, the bulk modulus is 117(10) GPa and the pressure derivative is 3(1).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman and Infrared Spectroscopy of Pyridine under High Pressure

We report the structural transitions of pyridine as a function of pressure up to 26 GPa using in situ Raman spectroscopy and infrared absorption spectroscopy. By monitoring changes in the Raman shifts in the lattice region as well as the band profiles in both Raman and IR spectra, a liquid-to-solid transition at 1 GPa followed by solid-to-solid transitions at 2, 8, 11, and 16 GPa were observed upon compression. These transitions were found to be reversible upon decompression from 22 GPa. A further chemical transformation was observed when compressed beyond 22 GPa as evidenced by the substantial and irreversible changes in the Raman and infrared spectra, which could be attributed to the destruction of the ring structure. The observed transformations in pyridine were also compared to those for benzene. The similar transition sequence with well-aligned transition pressures suggests that these isoelectronic aromatics may have similar structures and stabilities under high pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Equation of state of a high-pressure phase of Gd 3 Ga 5 O 12

Gd 3 Ga 5 O 12 (GGG), which crystallizes in the garnet structure at ambient conditions, was observed to transform to a high-pressure phase at 88 GPa after laser heating at 1500 K. This new phase is stable at least up to 180 GPa, and can be preserved on decompression to 50 GPa. This phase is cubic and consistent with a perovskite structure of stoichiometry (Gd 0.75 Ga 0.25 )GaO 3 . The zero-pressure bulk modulus, K 0 , obtained from fitting to a Birch-Murnaghan equation of state is 373(5) GPa with a fixed pressure derivative K' 0 =4. At 170 GPa, the bulk modulus of perovskite-type GGG is 979(15) GPa, which is comparable to that of diamond at the same pressure [956(21) GPa] and consistent with recently reported shock-compression data for Gd 3 Ga 5 O 12 . The new high-pressure phase of Gd 3 Ga 5 O 12 is thus highly incompressible.

36 MATERIALS SCIENCE↗