Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cu”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Measurement of electronic structure and surface reconstruction in the superionic Cu 2-x Te

Recently, layered copper chalcogenides Cu 2 X family (X=S, Se, Te) has attracted tremendous research interests due to their high thermoelectric performance, which is partly due to the superionic behavior of mobile Cu ions, making these compounds "phonon liquids."Here, we systematically investigate the electronic structure and its temperature evolution of the less studied single crystal Cu 2-x Te by the combination of angle resolved photoemission spectroscopy (ARPES) and scanning tunneling microscope/spectroscopy (STM/STS) experiments. While the band structure of the Cu 2-x Te shows agreement with the calculations, we clearly observe a 2×2 surface reconstruction from both our low temperature ARPES and STM/STS experiments which survives up to room temperature. Interestingly, our low temperature STM experiments further reveal multiple types of reconstruction patterns, which suggests the origin of the surface reconstruction being the distributed deficiency of liquidlike Cu ions. Our findings reveal the electronic structure and impurity level of Cu 2 Te, which provides knowledge about its thermoelectric properties from the electronic degree of freedom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Persistent Room-Temperature Photodarkening in Cu-Doped β - Ga 2 O 3

β–Ga 2 O 3 is an ultrawide band gap semiconductor with emerging applications in power electronics. Here, the introduction of acceptor dopants yields semi-insulating substrates necessary for thin-film devices. In the present work, exposure of Cu-doped β–Ga 2 O 3 to UV light > 4 eV is shown to cause large, persistent photo-induced darkening at room temperature. Electron paramagnetic resonance spectroscopy indicates that light exposure converts Cu 2+ to Cu 3+ , a rare oxidation state that is responsible for the optical absorption. The photodarkening is accompanied by the appearance of O–H vibrational modes in the infrared spectrum. Hybrid function calculations show that Cu acceptors can favorably complex with hydrogen donors incorporated as interstitial (Hi) or substitutional (HO) defects. When Cu Ga –HO complexes absorb light, hydrogen is released, contributing to the observed Cu 3+ species and O–H modes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Local probe investigation of the spin dynamics in the kagome and interlayers of orthorhombic barlowite $\mathrm{Cu4(OD)_6FBr; ^{79}Br}$ and $\mathrm{^{63}Cu}$ NQR study

Here we report 79 Br and 63 Cu nuclear quadrupole resonance (NQR) in the paramagnetic state above T N =15 K of the antiferromagnetic orthorhombic phase of barlowite Cu 4 (OD) 6 FBr consisting of a layered kagome structure. The divergent behavior of the longitudinal 79 (1/T 1 ) and transverse 79 (1/T 2 ) relaxation rates observed at 79Br sites evidences that critical slowing down of Cu spin fluctuations sets in below ~20 K. This means that one or more Cu sites, most likely at the interlayer Cu(3,4,5) sites between the kagome planes, undergo the antiferromagnetic phase transition in a fairly conventional way. On the other hand, the 63 Cu NQR signal intensity is gradually wiped out below ~30 K, pointing toward gradual spin freezing of the kagome layers instead. These contrasting findings suggest significant roles played by magnetic frustration effects within the kagome layers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Microstructural characterization of phase-separated co-deposited Cu–Ta immiscible alloy thin films

Elevated temperature co-sputtering of immiscible elements ends in a variety of self-organized morphologies due to phase separation. Cu–Ta is used as a model system to understand the evolution of phase-separated microstructural morphologies by co-sputtering thin films with nominal 50–50 at.% composition at four temperatures: 25, 400, 600, and 800 °C. Scanning/transmission electron microscopy of the film cross sections showed the microstructure morphology varied from nanocrystalline Cu–Ta at 25 °C to a wavy ribbon-like structure at 400 °C, to Cu-rich agglomerates surrounded by Ta-rich veins at 600 and 800 °C. In the agglomerate-vein morphology, microstructural features were present on two length scales, from a few nanometers to a few tens of nanometers, thus making the structures hierarchical. On the nanoscale, the Cu-rich agglomerates contained Ta precipitates, whereas the Ta-rich veins had embedded Cu nanocrystals. The various microstructures can be attributed to the highly disparate constituent element interdiffusion at the deposition temperatures with the Cu having orders of magnitude higher mobility than Ta at the deposition temperatures. This research of processing–microstructure relationship will be useful in guiding the design of hierarchical multiphase microstructures in binary or multicomponent thin films with tailored mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Assemblies of Polyacrylonitrile-Derived Photoactive Polymers as Blue and Green Light Photo-Cocatalysts for Cu-Catalyzed ATRP in Water and Organic Solvents

Photoluminescent nanosized quasi-spherical polymeric assemblies prepared by the hydrothermal reaction of polyacrylonitrile (PAN), ht-PLP PAN , were demonstrated to have the ability to photo-induce atom transfer radical polymerization (ATRP) catalyzed by low, parts per million concentrations of Cu II complex with tris(2-pyridylmethyl)amine (TPMA). Such photo induced ATRP reactions of acrylate and methacrylate monomers were performed in water or organic solvents, using ht-PLP PAN as the photo-cocatalyst under blue or green light irradiation. Mechanistic studies indicate that ht-PLP PAN helps to sustain the polymerization by facilitating the activation of alkyl bromide species by two modes: 1) green or blue light-driven photoreduction of the Cu II catalyst to the activating Cu I form, and 2) direct activation of dormant alkyl bromide species which occurs only under blue light. The photoreduction of the Cu II complex by ht-PLP PAN was confirmed by linear sweep voltammetry performed under illumination. Analysis of the polymerization kinetics in aqueous media indicated even though Cu I complexes comprised only 1–1.4% of all Cu species at equilibrium, they exhibited high activation rate constant and activated the alkyl bromide initiators five to six orders of magnitude faster than ht-PLP PAN .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Multiple Slater Determinants and Strong Spin-Fluctuations as Key Ingredients of the Electronic Structure of Electron- and Hole-Doped Pb 10− x Cu x (PO 4 ) 6 O

LK-99, with chemical formula Pb 10−x Cu x (PO 4 ) 6 O, was recently reported to be a room-temperature superconductor. While this claim has met with little support in a flurry of ensuing work, a variety of calculations (mostly based on density-functional theory) have demonstrated that the system possesses some unusual characteristics in the electronic structure, in particular flat bands. We have established previously that within DFT, the system is insulating with many characteristics resembling the classic cuprates, provided the structure is not constrained to the P3(143) symmetry nominally assigned to it. Here we describe the basic electronic structure of LK-99 within self-consistent many-body perturbative approach, quasiparticle self-consistent GW (QSGW) approximation and their diagrammatic extensions. QSGW predicts that pristine LK-99 is indeed a Mott/charge transfer insulator, with a bandgap gap in excess of 3 eV, whether or not constrained to the P3(143) symmetry. When Pb 9 Cu(PO 4 ) 6 O is hole-doped, the valence bands modify only slightly, and a hole pocket appears. However, two solutions emerge: a high-moment solution with the Cu local moment aligned parallel to neighbors, and a low-moment solution with Cu aligned antiparallel to its environment. In the electron-doped case the conduction band structure changes significantly: states of mostly Pb character merge with the formerly dispersionless Cu d state, and high-spin and low spin solutions once again appear. Thus we conclude that with suitable doping, the ground state of the system is not adequately described by a band picture, and that strong correlations are likely. Irrespective of whether this system class hosts superconductivity or not, the transition of Pb 10 (PO 4 ) 6 O from being a band insulator to Pb 9 Cu(PO 4 ) 6 O, a Mott insulator, and multi-determinantal nature of doped Mott physics make this an extremely interesting case-study for strongly correlated many-body physics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Heterogeneous Morphologies and Hardness of Co-Sputtered Thin Films of Concentrated Cu-Mo-W Alloys

Heterogeneous microstructures in Cu-Mo-W alloy thin films formed by magnetron co-sputtering immiscible elements with concentrated compositions are characterized using scanning transmission electron microscopy (STEM) and nanoindentation. In this work, we modified the phase separated structure of a Cu-Mo immiscible system by adding W, which impedes surface diffusion during film growth. The heterogeneous microstructures in the Cu-Mo-W ternary system exhibited bicontinuous matrices and agglomerates composed of Mo(W)-rich phase. This is unique, as these are the slower-diffusing species, contrasting past reports of binary Cu-Mo thin films that exhibited Cu-rich agglomerates. The bicontinuous matrices comprised of Cu-rich and Mo(W)-rich phases exhibited bilayer thicknesses of less than 5 nm. The hardness of these thin films measured using nanoindentation is reported and compared to similar multilayers and nanocomposites in binary systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermodynamic Modeling of the Al-Ce-Cu-Mg-Si System and Its Application to Aluminum-Cerium Alloy Design

Recently discovered AlCe alloys have shown promise in a number of applications, but the propensity of Ce to react with Al and other alloying elements can complicate the phase equilibria and design approach. To solve this, the CALPHAD method is used to explore an alloy within the quinary Al-Ce-Cu-Mg-Si system by developing a thermodynamic database with self-consistent parameters. The database includes a description of all 10 binary systems and 8 ternary systems consisting of: (i) 6 Al-containing ternaries (Al-Ce-Cu, Al-Ce-Mg, Al-Ce-Si, Al-Cu-Mg, Al-Cu-Si and Al-Mg-Si); and (ii) 2 additional ternaries that include Mg and Si (i.e., Ce-Mg-Si and Cu-Mg-Si). The thermodynamic description for the Al-Ce-Mg and Al-Mg-Si systems were reassessed to ensure consistency with the binary systems and the Ce-Mg-Si system is presented for the first time and compared to theoretical data from DFT (Density Functional Theory). In addition to the ternary interactions, the quaternary compound Al3Cu2Mg9Si7 and solid solution extending from the ternary Al2CuMg phase (Al,Si)2CuMg are incorporated. The CALPHAD method is employed and leveraged through the use of a Materials Design Simulator (MDS) to accelerate the design of novel aluminum-cerium-based alloys. The combination of a CALPHAD-based framework with experimental efforts and industrial insight permits the development of three new Al-Ce alloys: Al-3.5Ce-0.4Mg-7Si (Ce-modified A356), Al-5Ce-1Cu-0.5Mg-10Si and Al-19Ce-0.9Mg-1.1Si.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Cu(ClO)2 by Materials Project

CuO2Cl2 is alpha Po structured and crystallizes in the orthorhombic Pmna space group. The structure is zero-dimensional and consists of two CuO2Cl2 clusters. Cu is bonded in a square co-planar geometry to two equivalent O and two equivalent Cl atoms. Both Cu–O bond lengths are 1.77 Å. Both Cu–Cl bond lengths are 2.19 Å. O is bonded in a single-bond geometry to one Cu atom. Cl is bonded in a single-bond geometry to one Cu atom.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Cu(Cl2O)2 by Materials Project

CuCl4O2 crystallizes in the orthorhombic Fddd space group. The structure is three-dimensional. Cu is bonded in a 8-coordinate geometry to four equivalent O and four equivalent Cl atoms. All Cu–O bond lengths are 2.18 Å. All Cu–Cl bond lengths are 2.64 Å. O is bonded in a distorted square co-planar geometry to two equivalent Cu and two equivalent Cl atoms. Both O–Cl bond lengths are 2.07 Å. Cl is bonded in a 1-coordinate geometry to one Cu, one O, and one Cl atom. The Cl–Cl bond length is 2.34 Å.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Boosting Hydrogenation of CO 2 Using Cationic Cu Atomically Dispersed on 2D γ‐Al 2 O 3 Nanosheets

The continuous development of novel catalytic approaches is crucial for advancing efficient CO 2 hydrogenation processes. Drawing inspiration from single-atom catalysis and 2D materials, we designed a new 2D single-atom catalyst with excellent thermal stability by thermally treating Cu-adsorbed γ-AlOOH nanosheets, which yielded a Cu/γ-Al 2 O 3 catalyst with high activity in the hydrogenation of CO 2 -yielding methanol (CH 3 OH), dimethyl ether (DME), and CO as products. The active Cu sites are monodispersed and highly stable due to their cationic oxidation state and their substitution for pentacoordinated aluminum (Al P ) sites on particle surfaces. This study demonstrates an efficient approach for achieving a high CO 2 hydrogenation rate (30.45 mol mol −1 h −1 ) using a catalyst system that lacks metallic Cu centers, traditionally considered essential for H₂ dissociation, and employs what was previously thought to be an inert metal oxide (γ-Al 2 O 3 ) for CO and CH 3 OH production. Ongoing mechanistic studies aim to elucidate the synergy between cationic Cu single atoms and γ-Al 2 O 3 , a Lewis acid support, in facilitating hydrogen (H 2 ) activation and methanol formation.

2D catalyst↗
DOE OSTI2020

Localized corrosion at nm-scale hardening precipitates in Al-Cu-Li alloys

The localized corrosion of Li-containing nm hardening precipitates in the 3rd generation of Al-Cu-Li alloys was investigated based on a quasi in situ approach by sequentially exposing the material to NaCl solution and characterizing the structural, chemical, and electrochemical evolution at atomic scale using electron microscopy, spectroscopy, 3D tomography, electrochemical measurements, and DFT calculations. Localized corrosion of Al 7.5 Cu 4 Li (TB phase) initiated along {001} family of planes through the dealloying of Al and Li due to a low surface work function. Cu was enriched along the Cu (110) // T B (011) // Al (100) orientations on and around corroded T B precipitates. No strong galvanic interactions were observed at the T B and Al matrix interface due to the formation of a Li-C-O rich passivation layer during electrolyte exposure. Similarities and differences between T B and other common Al-Cu-Li precipitates (Al 2 CuLi, Al 6 CuLi 3 , and Al 3 Li) with respect to corrosion are discussed. Overall, the reported corrosion mechanism can assist in the assessment of the localized corrosion susceptibility of precipitation-hardened Al alloys and assist in the design of new alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Insights into the methanol synthesis mechanism via CO 2 hydrogenation over Cu-ZnO-ZrO2 catalysts: Effects of surfactant/Cu-Zn-Zr molar ratio

In this study, we evaluated aspects of the CO 2 hydrogenation mechanism, correlating structure-activity relationships of Cu-ZnO-ZrO 2 catalysts prepared by one-pot surfactant-assisted co-precipitation with different surfactant ratios. Identifying the CO 2 hydrogenation pathway intermediates is key to controlling the reaction selectivity. Experimental evidence shows that the CO 2 is dissociating into CO* and O* onto the surface of the Cu-ZnO-ZrO 2 catalyst. The adsorption and dissociation of CO2 were evidenced by a combination of in situ ambient-pressure X-ray Photoelectron Spectroscopy (AP-XPS) and Fourier Transform Infrared Spectroscopy (FTIR) with a transmission cell. AP-XPS showed that the catalysts are composed of a Cu 2+ , Zr 3+ , and Zr 4+ mixture and two kinds of Zn 2+ species. After the H 2 reduction process, only Cu 2+ was reduced to Cu0. The Zn and Zr species were oxidized by the dissociated O* species. In situ transmission FTIR showed that CO was adsorbed onto the Cu+/0 sites. The catalyst with the higher surfactant molar ratio exhibited the highest CO 2 conversion close to the equilibrium conversion, as well as a good methanol formation rate.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High-throughput investigation of structural evolution upon solid-state in Cu–Cr–Co combinatorial multilayer thin-film

Cu-Cr-Co combinatorial multilayer thin-films were prepared by a high-throughput ion beam sputtering system. Based on the thickness ratio among the individual nanoscale monolayers (Cu, Cr, Co), the resulting stoichiometry covered the entire phase diagram. The chemical composition and structure of Cu-Cr-Co combinatorial chip upon solid-state reaction were studied by lab-based micro-X-ray fluorescence (mu-XRF) and high-throughput synchrotron X-ray diffraction (XRD), respectively. A composition-structure map for Cu-Cr-Co combinatorial chip was developed through automated data analysis employing hierarchical clustering techniques. The structural evolution of Cu-Cr-Co combinatorial chip as a function of heat-treatment temperature, time, and modulation period were studied systematically. Furthermore, the effect of the elemental distribution in-depth direction was investigated to gain more insights regarding phase transformation. This work provides an efficient method and new perspectives for the design and optimization of the composition and structure of high-performance thin-films.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High-temperature lean Cu alloys with Cr-to-Nb atomic ratio of 2

Two Cu-Cr-Nb alloys, denoted as alloy 1 (comprising Cu-0.89 at% Cr-0.42 at% Nb) and alloy 2 (comprising Cu-1.84 at% Cr-0.99 at% Nb), were produced through a series of manufacturing processes including vacuum induction melting, melt spinning, consolidation, brazing, and baking, with both alloys aimed at achieving a nominal Cr-to-Nb atomic ratio of 2. Microstructural characterization using transmission electron microscopy and X-ray diffraction identified the cubic C15 Laves-phase Cr 2 Nb as the dominant precipitate in both alloys, cross-validated by thermodynamic calculations and atomistic simulation-based density functional theory (DFT). Besides cubic C15 Cr 2 Nb, hexagonal C14-phase Cr 2 Nb and α-BiF3 cubic structured Cr 3 Nb were also observed in the alloys, including a coherent interface formed between the Cr 3 Nb precipitate and the Cu matrix. The hardness of the alloys increases, and the electrical conductivity decreases with increasing alloying addition content; two practical equations described the trends. Further DFT simulations revealed that the electrical conductivity (conductance) of the Cu/Cr 2 Nb interface is an order of magnitude higher than the intrinsic Cu high-angle grain boundaries.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantitative analysis of Cu XANES spectra using linear combination fitting of binary mixtures simulated by FEFF9

We report x-ray absorption near edge structure (XANES) is a powerful tool to probe the fingerprint of local structures, and when coupled with X-ray microscopy, the small spot size enables one to probe very specific regions of interest in a device or material, e.g. interfaces/bulk, different grains, good/bad electrical areas. In this work, we investigate the use of linear combination fitting (LCF) of XANES spectra for the particular case of Cu doping in CdTe. We show that the experimental data seem to be accurately represented by standards of Cu 2 Te and its substoichiometric counterpart, Cu 1.43 Te. We use Cu in CdTe as a case study to evaluate the accuracy of linear combination fitting using simulated standards, given that experimental standards for certain phases (e.g. Cu 1.43 Te) or defect structures (e.g. vacancies) cannot be readily obtained. We discuss how spectral features of the FEFF9-simulated standards, fitting ranges, and noise levels all dictate the accuracy of this type of analysis. We show that the greater the spectral difference between the two standards, the better the LCF is able to differentiate between the two structures and to tolerate experimental noise. Finally, we estimate the error of the fitted weights for different spectral features and noise levels and propose a framework to study local structures semi-quantitatively by using binary mixtures of FEFF9-simulated standards.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Modes of strain accommodation in Cu-Nb multilayered thin film on indentation and cyclic shear

Two-phase layered thin films with a high density of semi-coherent interfaces exhibit excellent mechanical properties and thermal stability. Here, in this study, a magnetron-sputtered Cu-Nb dual-layered thin film (~500 nm for Cu and ~150 nm for Nb) having an amorphous interface between Cu and Nb with a high density of aligned growth twins in Cu is subjected to severe surface deformation. The material is loaded using indentation and cyclic shear under tribological testing. The strain accommodation in the subsurface microstructure after deformation varies based on the local structure and deformation mode. Grain refinement and crack formations in the stressed region of the Nb layer and localized crystallization of the amorphous interface are observed after indentation and scratch testing. Pronounced detwinning of growth twins in the Cu layer under the cyclic shear strain leaves large dislocations sites and loops which are observed both by high-resolution transmission electron microscopy and experiment-guided molecular dynamic (MD) simulations. Our simulations provided insights into understanding the pathway for the detwinning process under cyclic shear loading.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Multilayered Cu-Carbon Nanotube Composites for Advanced Conductors

Improving the efficiency of electrical components is critical in reducing energy consumption for various industrial and residential applications, ranging from rotating machinery to all electric devices and electric vehicle (EV) components to power grid systems. Substituting Cu wires with reduced resistance conductors that incorporate carbon nanotubes (CNTs) into Cu─ultraconductive Cu (UCC) composites─has recently been considered a promising strategy to improve energy efficiency, power density, and/or performance across various applications. Here, in this study, we created stable material formulations [CNT-containing polyvinylpyrrolidone (PVP) in dimethylformamide (DMF) solution] and utilized commercially viable fabrication approaches (electrospinning and magnetron sputtering) that produced high-performance multilayered tape-based UCC composite architectures. Increasing the CNT volume fraction by sequential layering of the structure with additional Cu-CNT layers showed a nearly stepwise improved performance in electrical and mechanical properties. This study also provides valuable insight into the effectiveness of nitrogen doping in modifying the conductivity of the CNT matrix. Fabricated prototypes demonstrated a >10% increase in current carrying capacity and >10% improvement in mechanical strength compared to those obtained on pure Cu. We believe that the properties demonstrated here, combined with the scalable manufacturing pathway of our approach, pave the way in designing future advanced conductors for diverse energy efficient and high-performance electrical systems and applications.

Carbon nanotubes↗