SEARCH · Engineering Papers

Results for “Crystal Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Isolation and characterization of a new polyoxometalate ligand, H 3 SbW 14 O 50 10- , and its interactions with f-elements

We report the synthesis and characterization (Raman, FTIR, DLS, single crystal XRD) of Cs 10 H 3 SbW 14 O 50 ·6H 2 O, which contains a new polyoxometalate building block: H 3 SbW 14 O 50 10- (SbW 14 ). Solution-state fluorescence, DLS, and UV-vis absorbance results with Nd 3+ , Eu 3+ , Am 3+ , and Cm 3+ confirm that SbW 14 acts as an efficient complexant and fluorescence sensitizer for f-elements.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2020

The role of iron in magnetic damping of Mg(Al,Fe) 2 O 4 spinel ferrite thin films

© 2020 Author(s). We have investigated magnesium aluminum ferrite thin films with a range of iron concentrations and identified the optimal iron content to obtain high crystalline quality thin films with the low magnetic damping required for spin current-based applications. Epitaxial MgAl 2-x FexO4 films with 0.8 < x < 2.0 were grown by pulsed laser deposition on single crystal MgAl2O4 substrates and were characterized structurally and magnetically. We find that the x = 1.5 composition minimizes the room-temperature magnetic damping with a typical Gilbert damping parameter of α eff = 1.8 × 10-3. This minimized damping is governed by a competition between the more robust magnetic ordering with increased iron content, x, and the more defective structure due to larger film-substrate lattice mismatch with increased iron content. The temperature-dependent magnetization curves indicate that Tc is suppressed below room temperature for iron content x ≤ 1.2 and eventually suppressed entirely for x = 0.8. X-ray magnetic circular dichroism results indicate that for all x the magnetic moment is dominated by Fe 3 + cations distributed in a 60:40 ratio on the octahedral and tetrahedral sites, with minimal contribution from Fe 2 + cations. Films with x = 1.4-1.6 exhibit very strong ferromagnetic resonance and low Gilbert damping with α eff = (1.8-6) × 10-3, making them ideal candidates for microwave and spintronic applications.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Molecular mechanism for the interaction between human CPSF30 and hFip1

Most eukaryotic pre-mRNAs must undergo 3'-end cleavage and polyadenylation prior to their export from the nucleus. A large number of proteins in several complexes participate in this 3'-end processing, including cleavage and polyadenylation specificity factor (CPSF) in mammals. The CPSF30 subunit contains five CCCH zinc fingers (ZFs), with ZF2–ZF3 being required for the recognition of the AAUAAA poly(A) signal. ZF4–ZF5 recruits the hFip1 subunit of CPSF, although the details of this interaction have not been characterized. Here we report the crystal structure of human CPSF30 ZF4–ZF5 in complex with residues 161–200 of hFip1 at 1.9 Å resolution, illuminating the molecular basis for their interaction. Unexpectedly, the structure reveals one hFip1 molecule binding to each ZF4 and ZF5, with a conserved mode of interaction. Our mutagenesis studies confirm that the CPSF30–hFip1 complex has 1:2 stoichiometry in vitro. Mutation of each binding site in CPSF30 still allows one copy of hFip1 to bind, while mutation of both sites abrogates binding. Our fluorescence polarization binding assays show that ZF4 has higher affinity for hFip1, with a K d of 1.8 nM. We also demonstrate that two copies of the catalytic module of poly(A) polymerase (PAP) are recruited by the CPSF30–hFip1 complex in vitro, and both hFip1 binding sites in CPSF30 can support polyadenylation.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2026

Dynamical moment fragmentation in the all-in all-out pyrochlore Nd 2 ⁢Sn 2⁢ O 7

We report single crystal neutron spectroscopy and bulk characterization on hydrothermally grown Nd 2 Sn 2 O 7 , revealing magnetic moment fragmentation embedded within the all-in–all-out ordered state. The spectra reveal a nearly flat band with pinch-point momentum dependence accompanied by dispersive branches that produce half-moon features across multiple Brillouin zones. These defining signatures are captured quantitatively by a minimal dipolar-octupolar spin Hamiltonian, demonstrating excellent agreement between experiment and theory. The higher flat-mode energy helps account for the absence of dynamical interference in prior μSR studies, while the lack of any photon-like excitation imposes strict constraints on the proposed Coulombic antiferromagnet scenario. Furthermore, our results extend moment fragmentation to Nd 2 Sn 2 O 7 and identify it as a clean, tractable platform for quantitative exploration of emergent gauge field physics in frustrated magnets.

DC susceptibility measurements↗

DOE OSTI2023

Capacitive discharge in flash experiments: A discussion of the charged species

Abstract We report on the discharge of the capacitance formed at the electrodes in flash experiments with yttria stabilized zirconia. The experiments were carried out by disconnecting the current, and, instead, short circuiting the electrodes through a resistor. The time dependent voltage across the resistor was measured; the ratio yielded the discharge current. The current decayed exponentially with time, as expected in an RC circuit, which allowed the measurement of the capacitance. Experiments were carried out in two ways. In one case the specimens were flashed within a glove box filled with Ar (< 1 ppm O 2 ): these yielded electronic conductors. In the other case the specimens were flashed in ambient air: while electronically conducting in‐flash these specimens recover their prior insulating behavior as soon as the current is turned off. The stored charge was two orders of magnitude greater in the Ar experiments. Rather unexpectedly, the sign of the voltage expressed at the electrodes was opposite in experiments carried out in air and in Ar. The capacitance measured in the discharge experiments is attributed to the formation of space charge adjacent to the electrodes. In the case of Ar experiments, the capacitance is very large, approaching 1 F; in this case the space charge is expected to be constituted from ions. In the air experiments the specimen becomes insulating, trapping the electrons as a space charge. Hall effect measurements of the carrier density and X‐ray photoelectron spectroscopy characterization of electronically conducting single crystal specimen of cubic zirconia are reported.

Materials Science↗

DOE OSTI2021

Nanocolumnar Pt:Ni Alloy Thin Films by High Pressure Sputtering for Oxygen Reduction Reaction

Self-supported nanocolumnar Pt:Ni thin films (TFs) with varying Pt:Ni atomic ratios and Pt mass loadings were produced on a microporous layer (MPL)-like surface composed of carbon particles by high pressure sputtering and examined as oxygen reduction reaction (ORR) electrocatalysts for polymer electrolyte membrane fuel cells. Cauliflower-like microstructures were observed from scanning electron microscopy imaging. Various Pt:Ni atomic ratios were obtained by simply changing the relative deposition power between Pt and Ni source and investigated by X-ray diffraction and quartz crystal microbalance analysis. Additionally, electrochemical characterization of the Pt:Ni-TF/MPL-like-layer/glassy-carbon samples was conducted through benchtop cyclic voltammetry and rotating disk electrode measurements. The electrochemically active surface area (ECSA) was found to be between 22–42 m 2 g -1 for different Pt:Ni atomic ratios. Lower Pt mass loadings exhibited a higher ECSA and the catalytic activity of all Pt:Ni ratios increased with the increase in Pt mass loading. The ORR activity of the Pt:Ni-TFs increased in the order of 3:1 < 1:1 < 1:3 with exhibiting a specific activity of 1781 μA cm -2 and mass activity of 0.66 A mg -1 for the Ni-rich film with 1:3 ratio. The catalytic performance of Pt:Ni-TFs were higher than traditional high surface area carbon supported Pt nanoparticles, elemental Pt nanorods, and Pt-Ni nanorods.

08 HYDROGEN↗

DOE OSTI2022

Nb₃Sn Coating of a 2.6 GHz SRF Cavity by Sputter Deposition Technique

Nb₃Sn is of interest as a coating for SRF cavities due to its higher transition temperature Tc ~18.3 K and superheating field Hsh ~400 mT, both are twice that of Nb. Nb₃Sn coated cavities can achieve high-quality factors at 4 K and can replace the bulk Nb cavities operated at 2 K. A cylindrical magnetron sputtering system was built, commissioned, and used to deposit Nb₃Sn on the inner surface of a 2.6 GHz single-cell Nb cavity. With two identical cylindrical magnetrons, this system can coat a cavity with high symmetry and uniform thickness. Using Nb-Sn multilayer sequential sputtering followed by annealing at 950°C for 3 hours, polycrystalline Nb₃Sn films were first deposited at the equivalent positions of the cavity’s beam tubes and equator. The film’s composition, crystal structure, and morphology were characterized by energy dispersive spectroscopy, X-ray diffraction, and atomic force microscopy. The Tc of the films was measured by the four-point probe method and was 17.61 to 17.76 K. Based on these studies, ~1.2 micron thick Nb₃Sn was deposited inside a 2.6 GHz Nb cavity. We will discuss first results from samples and cavity coatings, and the status of the coating system.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Dataset for "Enrichment of phosphates, lead, and mixed soil-organic particles in INPs at the Southern Great Plains site"

Ice nucleating particles (INPs) are rare particles that initiate primary ice formation, a critical step required for subsequent important cloud microphysical processes that ultimately govern cloud phase and cloud radiative properties. Laboratory studies have found that organic-rich dusts, such as those found in soils, are more efficient INPs compared to mineral dust. However, the atmospheric relevance of these organic-rich dusts are not well understood, particularly in regions with significant agricultural activity. The Agricultural Ice nuclei at the Southern Great Plains field campaign (AGINSGP) was conducted in rural Oklahoma to investigate how soil dusts contribute to INP populations in the Great Plains. We present chemical characterization of ambient and ice crystal residual particles from a single day of sampling using single particle mass spectrometry (SPMS) and scanning microscopy. Ambient particle concentrations were primarily carbonaceous or secondary aerosol, while dust particles were enhanced in the residual particles. Dust particles measured during residual sampling contained elevated signals for phosphate ($^{63}$PO$_2^-$ and $^{79}$PO$_3^-$) and lead ($^{208}$Pb$_2^+$). Nitrate was slightly depleted relative to ambient dust, and strong sulfate signals were not seen in the residual particles measured by the miniSPLAT. The residual and ambient particles measured by the miniSPLAT were approximately the same size, though this may be a reflection of the SPMS size-dependent transmission efficiency and not that of physical truth. This study shows that organic-rich soils may be important contributors to the ambient INP population in agricultural regions.

Cornwell, Gavin C↗

DOE OSTI2023

Earth Abundant Oxidation Catalysts for Removal of Contaminants of Emerging Concern from Wastewater: Homogeneous Catalytic Screening of Monomeric Complexes

Twenty novel Mn, Fe, and Cu complexes of ethylene cross-bridged tetraazamacrocycles with potentially copolymerizable allyl and benzyl pendant arms were synthesized and characterized. Multiple X-ray crystal structures demonstrate the cis-folded pseudo-octahedral geometry forced by the rigidifying ethylene cross-bridge and show that two cis coordination cites are available for interaction with substrate and oxidant. The Cu complexes were used to determine kinetic stability under harsh acidic and high-temperature conditions, which revealed that the cyclam-based ligands provide superior stabilization with half-lives of many minutes or even hours in 5 M HCl at 50–90 °C. Cyclic voltammetry studies of the Fe and Mn complexes reveal reversible redox processes indicating stabilization of Fe 2+ /Fe 3+ and Mn 2+ /Mn 3+ /Mn 4+ oxidation states, indicating the likelihood of catalytic oxidation for these complexes. Finally, dye-bleaching experiments with methylene blue, methyl orange, and rhodamine B demonstrate efficient catalytic decolorization and allow selection of the most successful monomeric catalysts for copolymerization to produce future heterogeneous water purification materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Synthesis, crystal and electronic structure of the Zintl phase Ba 16 Sb 11 . A case study uncovering greater structural complexity via monoclinic distortion of the tetragonal Ca 16 Sb 11 structure type

The binary Zintl phase Ba 16 Sb 11 has been synthesized and structurally characterized. Detailed studies via single-crystal X-ray diffraction methods indicate that although Ba 16 Sb 11 appears to crystallize in the tetragonal Ca 16 Sb 11 structure type (space group $P\bar{4}2_1$m with a=13.5647(9) Å, c=12.4124(12)Å, Z=2, R 1 = 3.14%; wR 2 = 4.77%), there exists an extensive structural disorder. Some Ba 16 Sb 11 crystals were found to be monoclinic and the structure was solved and refined in space group P2 1 (a=18.3929(12) Å, b=13.5233(8) Å, c=18.3978(12) Å, β=94.6600(10)°; Z=4, R 1 =5.84 %; wR 2 =9.58 %). The latter corresponds to a 2-fold superstructure of the tetragonal one, which provides a disorder-free structural model. In both descriptions, the disordered tetragonal and the ordered monoclinic superstructure, the basic building units that make up the structure of this Ba-rich compound are pairs of face-shared square antiprisms of Ba atoms, which are centered by Sb atoms. The dimerized antiprisms are linked into parallel chains via square prisms of Ba atoms, which are also centered by Sb atoms. The Zintl concept can be applied in a straightforward manner and as result, the structure of Ba 32 Sb 22 (=2×Ba 16 Sb 11 ) can be rationalized as (Ba 2+ ) 32 (Sb 3– ) 20 [Sb 2 ] 4– . Notably, the partitioning of the valence electrons is done taking into an account the homoatomic Sb–Sb contacts (d=3.01 Å), which can be clearly distinguished in the lower symmetry space group. Electronic structure calculations of Ba 16 Sb 11 are in good accordance with the Zintl rationalization and predict a semiconductor with a band gap of 0.77 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Chemical Preparation, Crystal Structure Reinvestigation and Vibrational Study of CoNa 3 P 3 O 10 ·12H 2 O and X-ray Characterization of the New Anhydrous Triphosphate CoNa 3 P 3 O 10

The triphosphate dodecahydrate of cobalt and sodium CoNa 3 P 3 O 10 ·12H 2 O was prepared by the ion exchange resin process. Its structure was studied by X-ray diffraction and determined in the monoclinic space group P12 1 /c1 with the unit-cell parameters a = 14.6650(5) Å, b=9.1916(3) Å, c = 15.0239(5) Å,β =90.2210(10)°, Z = 4 and V = 2025.13(12) Å 3 . The thermal dehydration of this compound was performed, leading to an anhydrous new form, CoNa 3 P 3 O 10 , which was characterized by X-ray diffraction. The obtained CoNa 3 P 3 O 10 crystallized in monoclinic space group P21/n with the unit-cell parameters a=15,3774 Å, b=7,6988 A°, c=14,2832A°, β=92,9115°. The characteristic IR wavenumbers of the P 3 O 10 5- ions observed in the vibrational spectra were calculated using isotopic substitutions, which confirms the existence of these groups in the studied compound. A comparison between the IR and Raman wavenumbers of CoNa 3 P 3 O 10 ·12H 2 O, CoNa 3 P 3 O 10 and Na 5 P 3 O 10 ·12H 2 was performed. A kinetic study was also made for CoNa 3 P 3 O 10 ·12H 2 O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Crystal response measurement of the x-ray transmission crystals used by the Imaging Spectroscopy Snout at the National Ignition Facility

The Imaging Spectroscopy Snout (ISS) used at the National Ignition Facility is able to simultaneously collect neutron pinhole images, 1D spatially resolved x-ray spectra, and time resolved x-ray pinhole images. To measure the x-ray spectra, the ISS can be equipped with up to four different transmission crystals, each offering different energy ranges from ∼7.5 to ∼12 keV and different resolutions. Characterizing and calibrating such instruments is of paramount importance in order to extract meaningful results from experiments. More specifically, we characterized different ISS transmission-type alpha-Quartz crystals by measuring their responses as a function of photon energy, from which we inferred the angle-integrated reflectivity for each crystal’s working reflections. These measurements were made at the Lawrence Livermore National Laboratory calibration station dedicated to the characterization of x-ray spectrometers. The sources used covered a wide x-ray range—from a few to 30 keV; the source diameter was ∼0.6 mm. The experimental results are discussed alongside theoretical calculations using the pyTTE model.

Dozieres, M. (ORCID:0000000286401459)↗

DOE OSTI2020

Synthesis, Structural Characterization and Chemical Bonding of Sr 7 Li 6 Sn 12 and its Quaternary Derivatives with Eu and Alkaline Earth Metal (Mg, Ca, Ba) Substitutions. A Tale of Seven Li‐Containing Stannides and Two Complex Crystal Structures

In this paper, we discuss the synthesis and the structural characterization of the new ternary compound Sr 7 Li 6 Sn 12 and its six quaternary derivatives, where alkaline earth metals (Ca, Mg, Ba) and the rare earth metal Eu are substituted, yielding crystalline phases of monoclinic or orthorhombic symmetry. The title compounds were synthesized via high‐temperature solid‐state reactions of the corresponding elements. The crystal structures were determined by single‐crystal X‐ray diffraction methods. The (Sr,Ca) 7 Li 6 Sn 12 and Eu 7 (Mg,Li) 6 Sn 12 phases represent a new structure type (space group P 2/ m , No. 10) while Sr 7 Li 6 Sn 12 and the rest of the title phases crystallize in the orthorhombic base‐centered space group Cmmm (No. 65) which is similar to the Eu 7 Li 8– x Sn 10+ x ( x ≈ 2.0) phase with the Ce 7 Li 8 Ge 10 structure type (Pearson code oC 50). Careful examination of the resulting structures shows intricate disordering between Li and Sn atoms, which is governed by the total number of valence electrons. The discussion of experimental results is also supported by DFT electronic structure calculations.

Osman, Hussien H.↗

DOE OSTI2020

Large Single Crystals of V 1– x Mo x O 2 from a Two-Step Chemical Vapor Transport Synthesis

This article details the synthesis of single crystals with the chemical formulas V 1-x Mo x O 2 ( 0 ≤ x ≤ 0.6) using the chemical vapor transport method at high temperatures (850 to 950 °C). These compounds are of interest due to the special relationship between their structure and electronic properties. Understanding this relationship will help guide future efforts in designing energy-saving devices. While some of these compounds have been synthesized before, this is the first time their synthesis has been reported for such a wide range of compounds in the form of bulk single crystals. The single crystal form is required for detailed characterization of the compounds. The materials were characterized chemically and structurally in order to validate the precise chemical compositions that were reported. Characterization methods included x-ray diffraction, inductively-coupled plasma atomic emission spectroscopy, and electron dispersive spectroscopy. The synthesis method is tunable, and the introduction of multiple steps both overcome the previous chemical challenges precluding synthesis of high molybdenum content crystals and allow for the creation of larger single crystals that were otherwise possible. The crystals synthesized this way are suitable for specialized measurements for determining the precise physical properties and atomic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Synthesis of porous organic cage CC3 via solvent modulated evaporation

We demonstrate a Humidity Modulated Solvent Evaporation (HMSE) approach to promote the nucleation and growth of CC3 crystals. This approach relies on the gradual evaporation of dichloromethane (solvent) from a diluted concentration of CC3 precursors deposited on aluminum foil. The slow solvent evaporation allowed enough time for the organization and formation of CC3 porous organic cage. The solvent diffusion rate was modulated by the relative humidity in the system. The slow kinetics implied during the development of CC3 phase, allowed the formation of CC3 crystals. HRTEM, SAED, SEM, and XRD patterns were used as pivotal characterization techniques to follow and confirm the formation of CC3 crystals.

porous organic cages, modulated evaporation, cryst↗

DOE OSTI2020

Recent experimental explorations of non-classical nucleation

Nucleation, the early stage of crystallization, is a key step in producing functional materials, but nucleation processes have yet to be understood in detail. Recent advanced characterization techniques, especially atomic force microscopy, liquid-cell transmission electron microscopy (TEM) and cryo-TEM, enable scientists to observe previously inaccessible nucleation details at the nanoscale. In this review, we summarize newly suggested non-classical nucleation models with respect to mechanistic understanding from experimental views, which highlight multi-step nucleation mechanisms. Different intermediated phases such as clusters at the pre-nucleation stage, liquid-like precursors, amorphous phases and even oligomers have been revealed, which play vital roles in nucleation and structure control. Moreover, these intermediated phases practically contribute in general to the structural variances of materials for nanoscience and nanotechnology. Overall, these studies ultimately enable us to control nucleation processes for materials synthesis.

Jin, Biao↗

DOE OSTI2023

Axis dependent conduction polarity in the air-stable semiconductor, PdSe 2

Axis-dependent conduction polarity (ADCP) is a unique electronic phenomena in which the charge polarity of carrier conduction can differ from p-type to n-type depending on the direction of travel through the crystal. Most materials that exhibit ADCP are metals, and very few semiconducting materials exhibit this effect. Here, in this work, we establish that PdSe 2 , a ~0.5 eV band gap semiconductor that is air- and water-stable, exhibits ADCP, through the growth and characterization of the transport properties of crystals with extrinsic p- and n-type doping levels of Ir and Sb, respectively, in the 10 16 –10 18 cm –3 range. Electron doped PdSe 2 exhibits p-type conduction in the cross-plane direction and n-type conduction along the in-plane directions above an onset temperature of 100–200 K that varies with doping level. Lightly p-doped samples show p-type thermopower in all directions at low temperatures, but above ~360 K the in-plane thermopower turns negative. Density functional theory calculations indicate that the origin of ADCP arises from the complementary effective mass anisotropies in the valence and conduction bands in this material, which facilitate hole transport in the cross-plane direction, and electron transport along the in-plane directions. ADCP occurs at temperatures with sufficient thermal population of both carrier types to overcome the extrinsic doping levels to exploit the effective mass anisotropy. In total, the development of this stable semiconductor in which thermally or optically excited holes and electrons inherently migrate along different directions opens up numerous potential applications in a multitude of technologies.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Time Domain Thermoreflectance (TDTR) Studies of Microstructural Characterization of as-Fabricated and/or Irradiated TPBAR Components

Paddock et al. demonstrated for the first-time the measurement of thermal diffusivity from thin metal films using picosecond transient thermoreflectance in 1986. This project attempted to use a similar experimental setup based on a femtosecond time domain thermoreflectance (TDTR) to measure the damage to the crystal lattice of LiAlO 2 from irradiation in the reactor and production of tritium and helium. The TDTR is based on a pump-probe laser configuration where the pump laser is used to heat the sample and the probe laser is used to follow the thermal evolution created by the pump laser. The goal for this project is to measure the differences in thermal diffusivity between LiAlO 2 and the irradiated Li AIO 2 sample in a reactor. Unfortunately, COVID-19 restricted laboratory research time and the availability of researchers capable to conduct TDTR work. In addition, the ultrafast laser (Astrella 35fs laser) required to conduct the work was inoperable making this particulate work impossible to conduct in FY20 and FY21. The purpose of the thermal diffusion measurements with a TDTR setup is to probe the damage and disorder to the crystal lattice of pristine and irradiated samples. Since TDTR was not available for this work, a different approach using Raman and luminescence spectroscopy was used to characterize the crystal lattice damage in LiAlO 2 from irradiation.

07 ISOTOPE AND RADIATION SOURCES↗