Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Conversion System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Overview of High Temperature Material Needs for Space Nuclear Propulsion Reactors

Space nuclear propulsion systems are capable of enabling future crewed missions to Mars. Two primary options of these systems exist: nuclear thermal propulsion (NTP) and nuclear electric propulsion (NEP). NTP systems use a reactor as a heat exchanger to heat a hydrogen propellant to produce high specific impulse (≥ 900 s) and thrust (10 - 100 klbf). A NTP materials challenge is development of nuclear fuel capable of operating for short durations (hours) under high power densities (≥ 5 MW/L) and temperatures (> 2700 K) in a corrosive hydrogen environment. In NEP systems, the reactor heats a working fluid which transfers heat to a power conversion system to power electric thrusters. NEP is capable of higher specific impulse (≥ 2000 s) but limited to low thrust (10s lbf). Light weight vessel and in-core structural materials that are radiation-resistant, creep-resistant, and dimensionally stable while operating at ~1500 K over mission times up to several years are needed for NEP. Both systems can benefit from high temperature neutron moderators. Through the Space Nuclear Propulsion project, NASA, supported by the DOE, is developing NTP and NEP systems. Technology maturation planning and risk reduction activities related to fabrication and testing of reactor material candidates is ongoing. This presentation overviews NTP and NEP materials needs and current ceramic and composite development activities.

nuclear thermal propulsion↗

Harnessing Synthetic Communities and Microbial Recycling of Space Waste Streams for Biomanufacturing Applications

The long-term habitation of extraterrestrial environments such as the Moon or Mars presents significant challenges including supplying materials to sustain life. Off-world recycling of waste materials into biomanufacturer products may ameliorate this. Current literature highlights the need for efficient waste recycling systems to support the bioproduction of essential materials including foods, pharmaceuticals, and biomaterials. The study herein concerns itself with the investigation of three key aspects: 1) formulating an optimal wastewater media on which to grow recombinant microbes for bioproduction in space, 2) examining the potential for constructing stable and metabolically synergistic synthetic microbial communities for largescale and multi-tiered biomanufacturing, and 3) testing the efficacy of one such bioengineered enzyme, cutinase, on the degradation of PET plastics characteristic of those found in ISS waste as a model for recombinant recycling-based biomanufacturing of mission-critical substrates. Formulation of an optimal wastewater media involved growing several microorganisms on mixtures of synthetic planetary wastes representative of those found in space waste systems, combined with simple carbon sources derived from a physio-chemical CO conversion system to determine their growth potential. Potential synthetic microbial communities were conceptually designed, and their stability and metabolic synergism was evaluated within the context of co-cultures. Cutinase activity assays were utilized to determine the efficacy of bioengineered cutinase on PET plastic degradation. Findings will contribute to optimization of wastewater-based media formulations, data on stable synthetic microbial communities for bioproduction, and effective methods for measuring cutinase-based PET plastic degradation. These outcomes support the development of sustainable waste recycling systems for space habitation and aim to fill gaps in the current literature and proposing innovative solutions for waste recycling in space environments. By leveraging synthetic biology this study seeks to enhance the feasibility of long-term extraterrestrial habitation through sustainable resource management.

Bioprocessing↗

Component-level Performance and Mass Sensitivity Analysis of NEP MW-class Power System

Nuclear electric propulsion (NEP) is a promising option towards enabling missions to Mars and is an area of interest for NASA’s Space Nuclear Propulsion project. This project is currently investigating technology development opportunities for an NEP vehicle. Physics-based modeling can be used in the early stages of technology development to gain understanding of the effects of technology and performance assumptions on the system performance and mass. This information can then inform technology maturation planning for near term development. By using a Brayton power conversion model and vehicle mass model for megawatt class NEP applications, a sensitivity analysis is performed to assess the impact of individual components’ performance on the power conversion system performance and system mass. A Monte Carlo simulation is also used to determine the variability in system mass based on uncertainty within the modeling parameters. The sensitivity analysis shows a high sensitivity to power conversion inlet temperature, compressor inlet temperature, and recuperator performance. A Monte Carlo analysis suggests a range of -10% to +15% for a 90% confidence interval on system mass based on the uncertainties in the model inputs.

Nuclear electric propulsion↗

Professional Advanced Research and Analysis

Reported here is a summary of studies examining some problems in an energy conversion system. Regenerative fuel cell systems have been suggested for future manned space missions, but to meet the needed specific power requirements substantial improvements in the state-of-the-art technologies are needed. Similar improvements are needed, with emphasis on cost reduction in addition to higher conversion efficiency, for fuel cell systems that have potential for terrestrial applications. Polymer Electrolyte Membrane (PEM) fuel cells have been identified as promising candidates for development that would lead to the desired cost reduction and increased efficiency.

Coulman, George A.↗

Professional Advanced Research and Analysis

Reported here is a summary of studies examining some problems in an energy conversion system. Regenerative fuel cell systems have been suggested for future manned space missions, but to meet the needed specific power requirements substantial improvements in the state-of-the-art technologies are needed. Similar improvements are needed, with emphasis on cost reduction in addition to higher conversion efficiency, for fuel cell systems that have potential for terrestrial applications. Polymer electrolyte membrane (PEM) fuel cells have been identified as promising candidates for development that would lead to the desired cost reduction and increased efficiency.

Coulman, George A.↗

Performance of the electrical controls for the Mini-Brayton system

The design theory and performance of a breadboard of the proposed Mini-Brayton electrical control system is presented. The Mini-Brayton is a nuclear isotope powered dynamic power conversion system. Testing was performed with an electronic simulation of a turbine alternator. Data on the voltage regulation, speed control, power consumption, reliability and transient response are presented for the breadboard.

Birchenough, A. G.↗

An evaluation of nuclear electric propulsion for planetary exploration missions

A set of nuclear electric propulsion (NEP) system parameters for planetary exploration missions is described. Orbiter missions to the planets Saturn, Uranus and Neptune were selected for assessment, and five delivery modes were evaluated. The NEP system envisioned for this application consisted of a nuclear fission reactor with a thermoelectric conversion system and a thrust subsystem comprised of power processors coupled with mercury ion-bombardment thrusters. The results indicate that an NEP system sized at 90-160 kW electrical power rating and operating within a specific impulse range of 4500-5500 sec provides adequate performance for outer planet exploration.

Nagorski, R. P.↗

Nuclear electric propulsion options for piloted Mars missions

Three nuclear electric propulsion (NEP) systems are discussed. The three systems are as follows: a system based on current SP-100 technology; a potassium Rankine-cycle based power conversion system, and an argon ion thruster system. The system will be researched for implementation in several possible vehicle configurations. The following are among the possible Mars vehicle configurations: a piloted 15 MWe multi-reactor vehicle; a piloted 10 MWe vehicle with ECCV; a piloted 10 MWe modular vehicle; piloted 10 and 15 MWe vehicles with ECCV and MEV; a piloted 5 MWe vehicle with ECCV; a 5 MWe cargo vehicle with 2 MEV's; and a 2.5 MWe vehicle with MEV.

George, Jeffrey A.↗

Carbon-Carbon Recuperators in Closed-Brayton-Cycle Space Power Systems

The feasibility of using carbon-carbon (C-C) recuperators in conceptual closed-Brayton-cycle space power conversion systems was assessed. Recuperator performance expectations were forecast based on notional thermodynamic cycle state values for potential planetary missions. Resulting thermal performance, mass and volume for plate-fin C-C recuperators were estimated and quantitatively compared with values for conventional offset-strip-fin metallic designs. Mass savings of 30 to 60 percent were projected for C-C recuperators with effectiveness greater than 0.9 and thermal loads from 25 to 1400 kWt. The smaller thermal loads corresponded with lower mass savings; however, 60 percent savings were forecast for all loads above 300 kWt. System-related material challenges and compatibility issues were also discussed.

Barrett, Michael J.↗

Laser-powered MHD generators for space application

Magnetohydrodynamic (MHD) energy conversion systems of the pulsed laser-supported detonation (LSD) wave, plasma MHD, and liquid-metal MHD (LMMHD) types are assessed for their potential as space-based laser-to-electrical power converters. These systems offer several advantages as energy converters relative to the present chemical, nuclear, and solar devices, including high conversion efficiency, simple design, high-temperature operation, high power density, and high reliability. Of these systems, the Brayton cycle liquid-metal MHD system appears to be the most attractive. The LMMHD technology base is well established for terrestrial applications, particularly with regard to the generator, mixer, and other system components. However, further research is required to extend this technology base to space applications and to establish the technology required to couple the laser energy into the system most efficiently. Continued research on each of the three system types is recommended.

Jalufka, N. W.↗

Carbon-Carbon Recuperators in Closed-Brayton-Cycle Nuclear Space Power Systems: A Feasibility Assessment

The feasibility of using carbon-carbon recuperators in closed-Brayton-cycle (CBC) nuclear space power conversion systems (PCS) was assessed. Recuperator performance expectations were forecast based on projected thermodynamic cycle state values for a planetary mission. Resulting thermal performance, mass and volume for a plate-fin carbon-carbon recuperator were estimated and quantitatively compared with values for a conventional offset-strip-fin metallic design. Material compatibility issues regarding carbon-carbon surfaces exposed to the working fluid in the CBC PCS were also discussed.

Barrett, Michael J.↗

Efficiency optimization of a thermionic converter array

Intensive study of the outer planets of the solar system requires the use of nuclear power for electric propulsion of spacecraft. Among the power conversion devices being considered for this application are thermionic converters. This paper presents the results of computer modeling of thermionic converters to identify the major design variables and select an optimum size for each of the thermionic converters for the power conversion system under consideration. Among the variables investigated were electrical and thermal losses in electrodes, leads and heat chokes. Those elements which minimized the electrical losses tended to increase thermal losses and system weight. Overall mechanical design and relative positioning of components also had impacts on converter efficiency and the power subsystem weight. Numerical calculations were made using the computer heat transfer code SINDA coupled with electrical loss parameters. The results of the computations are presented in this paper.

Kuo, Y. S.↗

Space commercialization and power system technology

The development and application of power and energy technologies important to the commercialization of space is discussed, stressing the significance of these technologies to space transportation systems, on-orbit services and on-orbit commercial production and processing ventures. Energy conversion systems examined include solar photovoltaic systems, solar thermal dynamic power systems, and nuclear power systems. Energy storage systems include electrochemical systems, inertial storage systems, and magnetic energy storage systems. In addition, power management and distribution systems used in space commercialization and NASA programs for the commercial development of space are discussed.

Brandhorst, H., Jr.↗

Free-piston Stirling engine conceptual design and technologies for space power, phase 1

As part of the SP-100 program, a phase 1 effort to design a free-piston Stirling engine (FPSE) for a space dynamic power conversion system was completed. SP-100 is a combined DOD/DOE/NASA program to develop nuclear power for space. This work was completed in the initial phases of the SP-100 program prior to the power conversion concept selection for the Ground Engineering System (GES). Stirling engine technology development as a growth option for SP-100 is continuing after this phase 1 effort. Following a review of various engine concepts, a single-cylinder engine with a linear alternator was selected for the remainder of the study. The relationships of specific mass and efficiency versus temperature ratio were determined for a power output of 25 kWe. This parametric study was done for a temperature ratio range of 1.5 to 2.0 and for hot-end temperatures of 875 K and 1075 K. A conceptual design of a 1080 K FPSE with a linear alternator producing 25 kWe output was completed. This was a single-cylinder engine designed for a 62,000 hour life and a temperature ratio of 2.0. The heat transport systems were pumped liquid-metal loops on both the hot and cold ends. These specifications were selected to match the SP-100 power system designs that were being evaluated at that time. The hot end of the engine used both refractory and superalloy materials; the hot-end pressure vessel featured an insulated design that allowed use of the superalloy material. The design was supported by the hardware demonstration of two of the component concepts - the hydrodynamic gas bearing for the displacer and the dynamic balance system. The hydrodynamic gas bearing was demonstrated on a test rig. The dynamic balance system was tested on the 1 kW RE-1000 engine at NASA Lewis.

Penswick, L. Barry↗

Design and fabrication of the Brayton rotating unit

The Brayton rotating unit (BRU), operating on a gas bearing system, has been designed, fabricated, and demonstrated for use in a closed Brayton cycle space power conversion system. The BRU uses a binary mixture of xenon and helium (molecular weight, 83.8) as the cycle working fluid and bearing lubricating medium and was designed to produce from 2.25 to 10.5 kw sub e of 1200 Hz three-phase electrical power. The single-shaft rotating assembly operates at a design speed of 36,000 rpm and comprises a radial single-stage compressor, a four-pole Rice alternator rotor, and a radial inflow turbine. Four units, a dynamic simulator and three component research packages, were supplied to the NASA Lewis Research Center for performance testing and further development.

Davis, J. E.↗

Electric propulsion and its applications to space missions

Consideration is given the NASA, Air Force and European electric propulsion programs, the characteristics of primary electric propulsion systems, nuclear electric orbit transfer vehicles, and such topics in the fundamental processes of electrostatic thrusters as sputtering in mercury ion thrusters, the screen hole plasma sheath of an ion accelerator system, and the modelling of ion beam neutralization and nitrogen chemisorption. Also considered are electrostatic thruster components and systems, electromagnetic thrusters such as MPD and RIT systems, electric rail guns and mass drivers, power sources which include solar and nuclear alternatives, power conversion systems and their cooling apparatus, and the environmental interactions between spacecraft and their electric propulsion systems.

Finke, R. C.↗