Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Complex Geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Computational modeling of residual stress formation during the electron beam melting process for Inconel 718

Here, a computational modeling approach to simulate residual stress formation during the electron beam melting (EBM) process within the additive manufacturing (AM) technologies for Inconel 718 is presented in this paper. The EBM process has demonstrated a high potential to fabricate components with complex geometries, but the resulting components are influenced by the thermal cycles observed during the manufacturing process. When processing nickel based superalloys, very high temperatures (approx. 1000 °C) are observed in the powder bed, base plate, and build. These high temperatures, when combined with substrate adherence, can result in warping of the base plate and affect the final component by causing defects. It is important to have an understanding of the thermo-mechanical response of the entire system, that is, its mechanical behavior towards thermal loading occurring during the EBM process prior to manufacturing a component. Therefore, computational models to predict the response of the system during the EBM process will aid in eliminating the undesired process conditions, a priori, in order to fabricate the optimum component. Such a comprehensive computational modeling approach is demonstrated to analyze warping of the base plate, stress and plastic strain accumulation within the material, and thermal cycles in the system during different stages of the EBM process.

97 MATHEMATICS AND COMPUTING↗

A novel freeform extrusion fabrication process for producing solid ceramic components with uniform layered radiation drying

An extrusion-based additive manufacturing process, called the Ceramic On-Demand Extrusion (CODE) process, for producing three-dimensional ceramic components with near theoretical density is introduced in this paper. Heere in this process, an aqueous paste of ceramic particles with a very low binder content (<1 vol%) is extruded through a moving nozzle at room temperature. After a layer is deposited, it is surrounded by oil (to a level just below the top surface of most recent layer) to preclude non-uniform evaporation from the sides. Infrared radiation is then used to partially, and uniformly, dry the just-deposited layer so that the yield stress of the paste increases and the part maintains its shape. The same procedure is repeated for every layer until part fabrication is completed. Several sample parts for various applications were produced using this process and their properties were obtained. The results indicate that the proposed method enables fabrication of large, dense ceramic parts with complex geometries.

36 MATERIALS SCIENCE↗

Infiltration studies of additive manufacture of WC with Co using binder jetting and pressureless melt method

Additive manufacturing (AM) of tungsten carbide-cobalt (WC-Co) is explored starting with WC preforms shaped with binder jet additive manufacturing (BJAM) followed by melt infiltration of Co. The research objective is to demonstrate the ability to net-shape WC-Co composites through BJAM of a WC preform followed by backfilling with cobalt via pressureless infiltration. This method also has the potential to minimize shrinkage and grain growth compared to other AM techniques. The effects of sintering, Co content, and infiltration time on the net shaping and properties of processed composites are shown. The best shaped material had an average grain size of 5.1 μm, 32 vol.% Co, density of 98.54% theoretical, fracture toughness of 23.2 MPa m 1/2 , and hardness of 9.0 GPa. Data presented illustrates that the proposed approach results in favorable ceramic-metal (cermet) properties and is viable for fabricating cermets of other material combinations. Furthermore successful AM of cermets provides complex geometries, high throughout, and low costs.

36 MATERIALS SCIENCE↗

Correlations between thermal history and keyhole porosity in laser powder bed fusion

Additive manufacturing has the potential to revolutionize the production of metallic components as it yields near net shape parts with complex geometries and minimizes waste. At the present day, additively manufactured components face qualification and certification challenges due to the difficulty in controlling defects. This has driven a significant research effort aimed at better understanding and improving processing controls – yielding a plethora of in-situ measurements aimed at correlating defects with material quality metrics of interest. In this work, we develop machine-learning methods to learn correlations between thermal history and subsurface porosity for a variety of print conditions in laser powder bed fusion. Un-normalized surface temperatures (in the form of black-body radiances) are obtained using high-speed infrared imaging and porosity formation is observed in the sample cross-section through synchrotron x-ray imaging. To demonstrate the predictive power of these features, we present four statistical machine-learning models that correlate temperature histories to subsurface porosity formation in laser fused Ti-6Al4V powder.

36 MATERIALS SCIENCE↗

Island scanning pattern optimization for residual deformation mitigation in laser powder bed fusion via sequential inherent strain method and sensitivity analysis

Laser powder bed fusion (L-PBF) has emerged as one of the mainstream additive manufacturing approaches for fabricating metal parts with complex geometries and intricate internal structures. However, large deformation associated with rapid heating and cooling can lead to build failure and requires post-processing which may increase manufacturing cost and prolong the production period. Here in this work, an island scanning pattern design method is proposed to optimize the scanning direction of each island in order to reduce part deformation after cutting off the build platform. The objective of this optimization is to minimize the upward bending of the part after sectioning, which allows the part deformation to satisfy the tolerance requirement or reduce the post heat treatment time. Inherent strain method is employed in the sequential finite element analysis consisting of layer-by-layer activations and sectioning for fast residual distortion prediction. Full sequential sensitivity analysis for the formulated optimization is provided to update the island scanning directions. To show the feasibility and effectiveness of the proposed method, the scanning patterns of a block structure and a connecting rod were designed and parts were fabricated using an open architecture L-PBF machine. The fabrication experiments demonstrated that the residual deformation of both parts fabricated by optimized scanning pattern can be reduced by over 50% compared to the initial scanning patterns, which demonstrate the effectiveness of the proposed method.

36 MATERIALS SCIENCE↗

A new procedure for implementing the modified inherent strain method with improved accuracy in predicting both residual stress and deformation for laser powder bed fusion

As a metal additive manufacturing (AM) process, laser powder bed fusion (L-PBF) has been widely used to produce parts with complex geometries. The large thermal gradient caused by the fast, intense, and repeated laser scanning induces significant residual deformation and stress to the as-built parts, which increase manufacturing difficulty and geometrical inaccuracy as a result. The modified inherent strain (MIS) method exploiting multiscale process simulations was developed to simulate residual deformation accurately and efficiently. However, the existing procedure of implementing the MIS method is found to give inaccurate residual stress prediction. Here in this work, a new implementation procedure for the MIS method is proposed to improve the simulation accuracy of residual stress without degrading the residual deformation prediction. The new procedure concerns the application of inherent strains to the part-scale layer-by-layer finite element model to obtain residual stress and deformation field. While the existing implementation of the part-scale MIS model involves only mechanical properties at ambient temperature, the new procedure adds one more solution step employing mechanical properties at an elevated temperature determined from the inherent strain extraction step. Both numerical and experimental studies are conducted to validate the proposed new implementation procedure. It shows that by using the new procedure, the MIS-based simulation can predict both residual stress and deformation of as-built L-PBF metal parts with good accuracy.

36 MATERIALS SCIENCE↗

Developing ductile and isotropic Ti alloy with tailored composition for laser powder bed fusion

Laser powder bed fusion (LPBF) is an advanced technology to create metallic components with complex geometry. Ti-6Al-4V (Ti64) is one of the most frequently used materials for LPBF. The intrinsic high cooling rates and ultra-high directional thermal gradient of melt, however, lead to a hierarchical structure composed of fine martensitic alpha' within columnar prior-beta grains in LPBF Ti64. This microstructure results in poor ductility and strong mechanical anisotropy in as-built Ti64 components, which largely limit their applications. Here, we report that the above shortcomings can be overcome by tailoring the alloy composition. Specifically, by reducing the aluminum content from 6 wt% to 4 wt%, the resultant LPBF Ti-4Al-4V (Ti44) alloy exhibits substantially improved ductility and mechanical isotropy. These improvements are attributed to grain refinement during solidification and the activation of multiple slip modes and twinning in the as-built material during deformation. This work offers a simple strategy to design new titanium alloys for LPBF with significantly improved ductility and isotropy.

36 MATERIALS SCIENCE↗

Measuring thermomechanical response of large-format printed polymer composite structures via digital image correlation

Large-format additive manufacturing (LFAM) is a branch of additive manufacturing (AM) research with the ability to create large structures typically measuring several meters in scale. LFAM is advantageous for tooling applications, not only because it offers the ability to create complex geometries not easily made using subtractive manufacturing processes, but the cost savings of pelletized feedstock used by these systems result in larger parts printed at faster speeds than traditional AM systems. Fiber reinforced polymer (FRP) is a commonly used feedstock material in LFAM structures because it reduces the distortion experienced during printing. However, FRP introduces highly anisotropic thermomechanical properties and contributes to a nonhomogeneous microstructure that can result in critical distortion of dimensions during tooling. Measuring the global thermomechanical response of LFAM structures requires a more representative method that accounts for not only anisotropic properties but also the nonhomogeneous nature of the final part. This is where traditional techniques to measure thermomechanical response, such as thermomechanical analysis (TMA), fall short as they assume homogeneity. This study evaluated the coefficient of thermal expansion (CTE) of LFAM structures as measured by TMA as compared to a novel digital image correlation oven (DIC Oven) system. The LFAM structures were made from 20 % by weight carbon fiber reinforced acrylonitrile butadiene styrene (CF-ABS). TMA measurements showed significant variations in CTE across a single LFAM bead, confirming the need for a global technique that captures overall thermomechanical response. The CTE values measured using the DIC Oven compared well to average TMA values obtained from localized measurements across the sample. The DIC Oven was also used to quantify the effects of different layer orientations on thermomechanical properties, which cannot be easily captured using TMA. A predictive model was also developed by using localized TMA values across an LFAM bead to predict the overall thermomechanical response of an LFAM structure.

36 MATERIALS SCIENCE↗

Ink-based laser powder bed fusion of barium titanate

Barium titanate (BTO) is a lead-free functional ceramic that is widely used in sensors, transducers, and actuators. The increasing demand for complex geometries and quick design iterations motivates the use of additive manufacturing techniques. Laser powder bed fusion (L-PBF) additive manufacturing technique enables the net-shape or near-net-shape fabrication of metals and alloys. Ceramic L-PBF remains challenging due to their high melting temperature. Here, to address this challenge, a nanoparticle ink feedstock was incorporated into the L-PBF process to allow low power melting of BTO. Key print parameters (i.e. laser power, scanning speed, and hatching spacing) were optimized to fabricate millimeter-scale BTO parts. The printed BTO samples possessed an inhomogeneous equiaxed-columnar-cellular microstructure. Semiconducting current-voltage behavior was observed in as-printed samples, which was attributed to the creation of oxygen vacancies. The piezoelectric d 33 coefficient was measured to be 4.6 pC/N.

Dielectrics↗

A fully 3-D numerical model to predict flood wave propagation and assess efficiency of flood protection measures

Discussed are the development and validation of a 3-D, non-hydrostatic, Reynolds-Averaged Navier–Stokes (RANS) model using the Volume of Fluid (VOF) approach to simulate flooding events in natural environments. A series of validation simulations in simple and complex geometries are performed to test the different modules of the flow solver. The paper also discusses the differences between simulation results obtained using the 3-D model and those obtained using a standard, 2-D hydrostatic, depth-averaged model. The predictions by the two models show fairly large differences in regions where 3-D effects are expected to be significant (e.g., in regions containing highly-curved river reaches and near hydraulic structures). Then, the validated 3-D model is employed to investigate the efficiency of using flood-protection walls to reduce adverse effects of flooding in the Iowa River near Iowa City, Iowa, USA. Finally, the propagation of a flood wave in a reach of the Iowa River containing a bridge is simulated and the effects of the flow becoming pressurized beneath the bridge deck are discussed. For such applications, in which the regime can change locally between open channel and pressurized flow, the use of fully 3-D, non-hydrostatic models may be the only viable option to accurately predict flow hydrodynamics and its effects on bed shear stresses and sediment entrainment potential, especially around locations where the flow becomes pressurized.

Water Resources↗

τ-SIMPLE Algorithm for the closure problem in homogenization of stokes flows

Estimation of the permeability tensor is crucial for many natural and industrial porous media applications. Homogenization provides a rigorous framework to calculate effective parameters from pore-scale images of a representative unit cell of the porous medium by solving a boundary value problem, also known as closure problem, subject to global constraints. However, the latter are hard to satisfy for arbitrarily complex geometries. We have developed a novel computational algorithm to calculate rigorously the permeability tensor. The approach, here referred to as τ-SIMPLE, is based on introducing an artificial time scale τ to satisfy the global constraint within the SIMPLE iteration. Here, we show that the proposed algorithm has high accuracy for both two-dimensional and three-dimensional periodically arranged geometries.

54 ENVIRONMENTAL SCIENCES↗

Coupled reactors analysis: New needs and advances using Monte Carlo methodology

Coupled reactors and the coupling features of large or heterogeneous core reactors can be investigated with the Avery theory that allows a physics understanding of the main features of these systems. However, the complex geometries that are often encountered in association with coupled reactors, require a detailed geometry description that can be easily provided by modern Monte Carlo (MC) codes. This implies a MC calculation of the coupling parameters defined by Avery and of the sensitivity coefficients that allow further detailed physics analysis. The results presented in this paper show that the MC code SERPENT has been successfully modifed to meet the required capabilities.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Design of an experimental facility with a unit cell test section for studies of the lower plenum in prismatic high temperature gas reactors

A proposed design for a Generation IV reactor is the very-high temperature reactor (VHTR), which employs helium as the primary coolant. Although many advantages exist with this design, a number of challenges remain. One such area of concern is the turbulent mixing of non-isothermal flows in the lower plenum, where an array of coolant jets collectively mix and traverse around a series of structural support posts before exiting the core. Neighboring jets in the lower plenum could experience temperature differences as high as 300–400 K, causing potential hot streaking in the support posts. Additional problems could occur further downstream if the level of non-uniformity in the temperatures is too high (e.g, inducing thermal stresses on gas turbine blades). Therefore, it is important that adequate tools exist to predict the turbulent mixing within the VHTR lower plenum. This task remains difficult to achieve due to the complex geometry and flow physics that dictate the mixing. Various modeling approaches can only be assessed using data acquired from a carefully designed experimental facility. This paper presents details of such a facility, where high-fidelity measurements can be acquired for a scaled portion of the lower plenum defined herein as a ‘‘unit cell”, which consists of a hexagonal array of jets whose flow is directed into a test section with support posts positioned between neighboring jets, and subjected to a crossflow. Through adjusting velocity and temperature conditions at the jet inlets, different locations within the lower plenum can be experimentally simulated. System response quantities (SRQs) include both temperature and velocity measurements, captured via multiple thermocouples embedded in each post, and particle image velocimetry (PIV), respectively. These SRQs provide assessment metrics for both the momentum and energy models present in current computational solvers, and therefore the experimental facility is a valuable source for validation data. Another benefit is a more comprehensive understanding of the thermal-hydraulic loading conditions and flow physics present in the VHTR lower plenum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The DEAL.II finite element library: Design, features, and insights

DEAL.II is a state-of-the-art finite element library focused on generality, dimension-independent programming, parallelism, and extensibility. In this paper, we outline its primary design considerations and its sophisticated features such as distributed meshes, h p -adaptivity, support for complex geometries, and matrix-free algorithms. But DEAL.II is more than just a software library: It is also a diverse and worldwide community of developers and users, as well as an educational platform. We therefore also discuss some of the technical and social challenges and lessons learned in running a large community software project over the course of two decades.

97 MATHEMATICS AND COMPUTING↗

Formation of surface ionization waves in a plasma enhanced packed bed reactor for catalysis applications

Plasma enhanced packed bed reactors (PE-PBRs) intrinsically have complex geometries which makes it difficult to apply conventional scaling laws. For example, controlling the manner of discharge propagation between the micro-discharges (MDs) that occur between dielectrics in PE-PBRs and surface ionization waves (SIWs) that propagate along the dielectrics would aid in selectivity during plasma catalysis. An important parameter in that optimization is the pulse power format. In this work, we investigated the role of applied voltage amplitude and polarity on time resolved dynamics in an atmospheric pressure dielectric barrier discharge (DBD) operating in helium having surface topology resembling PE-PBRs using phase and space resolved optical emission spectroscopy (PROES). To enable systematic studies, the DBD uses an array of dielectric semi-spheres imaged through a top transparent electrode and imaged between the two electrodes from the side. The results were compared with 2-dimensional modeling. We identified three discharge mechanisms: filamentary micro-discharges (F-MDs) in the volume (the space between the surface of the dielectrics and the counter electrode), surface micro-discharges (S-MDs) between the dielectric semi-spheres near their contact points, and SIWs over the curved or flat dielectric surfaces. At the lowest voltages, only F-MDs are generated, once in each half cycle. At intermediate voltages, SIWs also appear which transform into S-MDs at the contact points. When voltage is further increased, several additional pulses are observed, which generate S-MDs at the contact points or a combination F-MDs and S-MDs. The voltage amplitude determines the frequency of these pulses. Modeling results show variations in plasma density and electron temperature for each of the three mechanisms which, in turn, impact production of reactive species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physicochemical properties of digital light processing 3D-Printed alumina and mullite ceramics

Alumina ceramics fabricated using conventional techniques such as uniaxial pressing or injection molding are popular due to their low density, excellent insulation, and mechanical properties. However, these methods often limit the fabrication of complex geometries with high dimensional accuracy due to tooling constraints and limited design freedom. To overcome these limitations, this study employed Digital Light Processing (DLP) additive manufacturing (AM), which enables the production of precise structures. In addition, the optimization of sintering parameters to enhance the densification and performance of alumina and mullite ceramics was investigated, with a specific focus on how varying sintering temperatures and hold times affect part shrinkage, geometric accuracy, and material integrity. Flexural strength of both alumina and mullite specimens was clearly influenced by the way the layers was stacked. When layers were arranged across the direction of the applied load (Z = 4; XZ), the strength was higher than when they were stacked along the same direction as the load (Z = 3; XY). Weibull analysis based on these results showed high modulus values across all samples, indicating good reliability in the flexural strength measurements. This reliability, combined with the clear influence of sintering parameters, highlights how processing conditions effect the material properties and mechanical performance of parts produced through DLP additive manufacturing. In conclusion, these findings open new avenues for ceramic AM across various applications, enhancing the potential for innovation in fields such as aerospace, biomedical engineering, and energy.

36 MATERIALS SCIENCE↗

Eulerian-Eulerian large eddy simulation of two-phase dilute bubbly flows

An efficient mathematical model is presented for conducting large eddy simulation (LES) of turbulent bubbly flows at low gas hold-ups. The mathematical model is based on the filtered multi-fluid equations derived by application of the component-weighted volume-averaging process of each phase. A two-fluid model is applied to the filtered set of equations, yielding a more computationally tractable set of filtered equations. The filtered equations are formulated in generalized curvilinear coordinates to simulate turbulent gas-liquid bubbly flows in complex geometries. The Germano model is used to account for sub-grid turbulent stresses. The gas and liquid momentum equations are discretized with the hybrid staggered/non-staggered method. The performance of the developed mathematical model is demonstrated by simulating the benchmark test case of a turbulent gas-liquid bubbly flow in a rectangular bubble column. The accuracy of the proposed method is assessed via comparison with the experimental data and other numerical results in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗