Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Color confinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

317 records · Page 18

MARCI-observed clouds in the Hellas Basin during northern hemisphere summer on Mars: Interpretation with the NASA/Ames Legacy Mars Global Climate Model

We present a study that is motivated by a population of water ice clouds in the Hellas Basin that has been observed by the MARs Color Imager (MARCI) instrument on the Mars Reconnaissance Orbiter (MRO) to persist throughout the majority of Northern Hemisphere (NH) summer. Although water ice clouds are present in Hellas at very low opacities throughout NH spring, they noticeably thicken after L(sub s) 60° and continue to do so until their peak optical thickness is attained at L(sub s) ~120°. They dissipate rapidly from L(sub s) 120° to 150°, and by L(sub s) 150°, the only clouds in Hellas are on the southern side of the basin and are indistinguishable from the polar hood clouds. We use the NASA/Ames Legacy Mars Global Climate Model (GCM), which is supported by the Agency’s Mars Climate Modeling Center, to investigate the dynamical and microphysical mechanisms that control the formation and evolution of Hellas water ice clouds. We show that water is transported from the North Polar Residual Cap (NPRC) southward across the equator and into the Hellas region. Water vapor is confined down low by cloud formation in the aphelion cloud belt, thus limiting the effectiveness of transport by the zonal mean overturning circulation (i.e., the Hadley cell). Thus, contrary to the commonly held conceptual understanding that the Hadley cell controls cross-equatorial water transport during this season, we show that the southward transport of water is done primarily in the vapor phase by stationary eddies at nearly all latitudes, including across the equator. Clouds form near the surface in the basin as moist air mixes with cold polar air on the western side of Hellas and are subsequently transported clockwise around the north side of the basin by the low-level cyclonic circulation. The simulated Hellas clouds have small particle sizes (~3–5 μm), are very low, and exist as long as the NPRC is exposed.

M. A. Kahre↗

Usability Evaluation of a Flight-Deck Airflow Hazard Visualization System

Many aircraft accidents each year are caused by encounters with unseen airflow hazards near the ground, such as vortices, downdrafts, low level wind shear, microbursts, or turbulence from surrounding vegetation or structures near the landing site. These hazards can be dangerous even to airliners; there have been hundreds of fatalities in the United States in the last two decades attributable to airliner encounters with microbursts and low level wind shear alone. However, helicopters are especially vulnerable to airflow hazards because they often have to operate in confined spaces and under operationally stressful conditions (such as emergency search and rescue, military or shipboard operations). Providing helicopter pilots with an augmented-reality display visualizing local airflow hazards may be of significant benefit. However, the form such a visualization might take, and whether it does indeed provide a benefit, had not been studied before our experiment. We recruited experienced military and civilian helicopter pilots for a preliminary usability study to evaluate a prototype augmented-reality visualization system. The study had two goals: first, to assess the efficacy of presenting airflow data in flight; and second, to obtain expert feedback on sample presentations of hazard indicators to refine our design choices. The study addressed the optimal way to provide critical safety information to the pilot, what level of detail to provide, whether to display specific aerodynamic causes or potential effects only, and how to safely and effectively shift the locus of attention during a high-workload task. Three-dimensional visual cues, with varying shape, color, transparency, texture, depth cueing, and use of motion, depicting regions of hazardous airflow, were developed and presented to the pilots. The study results indicated that such a visualization system could be of significant value in improving safety during critical takeoff and landing operations, and also gave clear indications of the best design choices in producing the hazard visual cues.

Aragon, Cecilia R.↗

Expansion Behavior and Temperature Mapping of Thermites in Burn Tubes as a Function of Fill Length [Thermal Imaging of Thermite Flame Propagation]

The reaction of loosely-packed aluminum/copper oxide (Al/CuO) thermites in a 12 cm long acrylic burn tube was investigated as a function of the fill length from 2 to 10 cm. The velocity of the luminous front was measured both in the filled and unfilled region, and approached 1000 m s-1 in the unfilled region, independent of the fill length. This value is approximately a factor of two higher than the fastest velocity measured in the filled region, 606 m s-1, for the 10 cm filled tube. The velocity increase in the unfilled region ist likely due to the increased open porosity, which can support faster flow velocities for a given pressure gradient relative to that in the porous material. A high-speed color imaging pyrometer was used to thermally map the evolution of the flame in both regions. Near the luminous front in the filled section, the temperature was observed to rapidly increase in a 1–2 cm zone to a maximum value near 3200 K, and an average value near 3000 K was sustained in the wake well after the front passes and exits the tube. In partially-filled tubes, even for the lowest fill length of 2 cm, the intermediate and/or product species could be seen to expand forward and completely fill the tube with a sustained temperature of ca. 3000 K. This temperature did not decay during the expansion, suggesting that the material continues to react as it expands. The results raise several questions about what a burn tube experiment is really measuring; such as what fraction of the material has burned when the luminous front passes and what role open cracks or microstructures play in promoting transport. Lastly, these questions are critically important towards developing a predictive capability for confined, loosely packed deflagrations.

36 MATERIALS SCIENCE↗

Robust Chiral Organization of Cellulose Nanocrystals in Capillary Confinement

Here we showed large area uniformly aligned chiral photonic bioderived films from a liquid crystal phase formed by a cellulose nanocrystal (CNC) suspension placed in a thin capillary. As a result of the spatial confinement of the drying process, the interface between coexisting isotropic and chiral phases aligns perpendicular to the long axis of the capillary. This orientation facilitates a fast homogeneous growth of chiral pseudolayers parallel to the interface. Overall, the formation of organized solids takes hours vs weeks in contrast to the slow and heterogeneous process of drying from the traditional dish-cast approach. The saturation of water vapor in one end of the capillary causes anisotropic drying and promotes unidirectional propagation of the anisotropic phase in large regions that results in chiral CNC solid films with a uniformly oriented layered morphology. Corresponding ordering processes were monitored in situ at a nanoscale, mesoscale, and microscopic scale with complementary scattering and microscopic techniques. The resulting films show high orientation order at a multilength scale over large regions and preserved chiral handedness causing a narrower optical reflectance band and uniform birefringence over macroscopic regions in contrast to traditional dish-cast CNC films and those assembled in a magnetic field and on porous substrates. Finally, these thin films with a controllable and well-identified uniform morphology, structural colors, and handedness open up interesting possibilities for broad applications in bioderived photonic nanomaterials.

36 MATERIALS SCIENCE↗

Two-Level Quantum Systems in Two-Dimensional Materials for Single Photon Emission

Single photon emission (SPE) by a solid-state source requires presence of a distinct two-level quantum system, usually provided by point defects. Here we note that a number of qualities offered by novel, two-dimensional materials, their all-surface openness and optical transparence, tighter quantum confinement, and reduced charge screening—are advantageous for achieving an ideal SPE. On the basis of first-principles calculations and point-group symmetry analysis, a strategy is proposed to design paramagnetic defect complex with reduced symmetry, meeting all the requirements for SPE: its electronic states are well isolated from the host material bands, belong to a majority spin eigenstate, and can be controllably excited by polarized light. Here, the defect complex is thermodynamically stable and appears feasible for experimental realization to serve as an SPE-source, essential for quantum computing, with Re Mo V S in MoS 2 as one of the most practical candidates.

36 MATERIALS SCIENCE↗

Interpolating the ‘t Hooft model between Instant and Light-Front dynamics in the Coulomb Gauge

The 1+1D model of quantum chromodynamics (QCD) in the infinite number of colors, or 't Hooft model, can be interpolated between the instant form dynamics (IFD) and the light-front dynamics (LFD) using an interpolation parameter 0 (IFD) ≤ δ ≤ π/4 (LFD). This was realized in the interpolating axial gauge which links the axial gauge (A 1 = 0) in IFD and the light-front gauge (A + = 0) [1]. In this presentation, we discuss the corresponding realization in the interpolating Coulomb gauge which links the temporal gauge (A 0 = 0) in IFD and the light-front gauge (A + = 0) and its benefit of resolving the issue associated with the absence of the conjugate field to the gauge field A 0 in the axial gauge. In both gauges, all degrees of freedom are physical making these gauge choices ideal for finding the bound-state equations and for renormalizability. Although the gauge independence of the physical observables such as the meson mass spectra following Regge trajectories may be guaranteed due to the gauge symmetry of QCD, the realization and interpretation of the identical physical results may depend on the gauge choices. Here, we discuss such difference in the realization of the confinement phenomena ala linear potential in the two different gauges, Coulomb vs. Axial, and highlight the gauge independent physical results expected. We also comment on the utility of the interpolation which leads to an alternative quasi-PDF that can be implemented in the lattice QCD without suffering from the large momentum boost.

Duggin, Hunter↗

On the stability of the open-string QED neutron and dark matter

We study the stability of a hypothetical QED neutron, which consists of a color-singlet system of two d quarks and a u quark interacting with the QED interaction. As a quark cannot be isolated, the intrinsic motion of the three quarks in the lowest-energy state may lie predominantly in 1 + 1 dimensions, as in a d-u-d open string. The attractive d-u and u-d QED interactions may overcome the weaker repulsive d-d QED interaction to bind the three quarks together. We examine the QED neutron in a phenomenological three-body problem in 1 + 1 dimensions with an effective interaction extracted from Schwinger’s exact QED solution in 1 + 1 dimensions. The phenomenological model in a variational calculation yields a stable QED neutron at 44.5 MeV. The analogous QED proton with two u quarks and a d quark has been found to be too repulsive to be stable and does not have a bound or continuum state, onto which the QED neutron can decay via the weak interaction. Consequently, the QED neutron is stable against the weak decay, has a long lifetime, and is in fact a QED dark neutron. It may be produced following the deconfinement-to-confinement phase transition of the quark gluon plasma in high-energy heavy-ion collisions. Because of the long lifetime of the QED dark neutron, self-gravitating assemblies of QED dark neutrons or dark antineutrons may be good candidates for a part of the primordial dark matter produced during the phase transition of the quark gluon plasma in the evolution of the early Universe.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

All-Optical Control of Nonlinear Self-Focusing in Plasmas Using Non-Resonantly Driven Plasma Wave

Excitation of plasma density perturbations by an initially bi-color laser pulse helps to control nonlinear refraction in the plasma and enables various types of laser self-guiding. In this report we consider a setup that not only makes possible the transport of laser energy over cm-long relatively dense plasmas (n{sub 0} = 10{sup 18} cm{sup -3}) but also transforms the pulse into the unique format inaccessible to the conventional amplification techniques (relativistically intense periodic trains of few-cycle spikes). This well focusable pulse train is a novel light source interesting for ultra-fast high-field science applications. The opposite case of suppression of nonlinear self-focusing and dynamical self-guiding of an over-critical multi-frequency pulse is proposed for the proof-of-principle experimental study.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Surface Chemistry and Structure of Colloidal Lead Halide Perovskite Nanocrystals

Since the initial discovery of colloidal lead halide perovskite nanocrystals, there has been significant interest placed on these semiconductors because of their remarkable optoelectronic properties, including very high photoluminescence quantum yields, narrow size- and composition-tunable emission over a wide color gamut, defect tolerance, and suppressed blinking. These material attributes have made them attractive components for next-generation solar cells, light emitting diodes, low-threshold lasers, single photon emitters, and X-ray scintillators. While a great deal of research has gone into the various applications of colloidal lead halide perovskite nanocrystals, comparatively little work has focused on the fundamental surface chemistry of these materials. While the surface chemistry of colloidal semiconductor nanocrystals is generally affected by their particle morphology, surface stoichiometry, and organic ligands that contribute to the first coordination sphere of their surface atoms, these attributes are markedly different in lead halide perovskite nanocrystals because of their ionicity. Herein, emerging work on the surface chemistry of lead halide perovskite nanocrystals is highlighted, with a particular focus placed on the most-studied composition of CsPbBr 3 . We begin with an in-depth exploration of the native surface chemistry of as-prepared, 0-D cuboidal CsPbBr 3 nanocrystals, including an atomistic description of their surface termini, vacancies, and ionic bonding with ligands. We then proceed to discuss various post-synthetic surface treatments that have been developed to increase the photoluminescence quantum yields and stability of CsPbBr 3 nanocrystals, including the use of tetraalkylammonium bromides, metal bromides, zwitterions, and phosphonic acids, and how these various ligands are known to bind to the nanocrystal surface. To underscore the effect of post-synthetic surface treatments on the application of these materials, we focus on lead halide perovskite nanocrystal-based light emitting diodes, and the positive effect of various surface treatments on external quantum efficiencies. We also discuss the current state-of-the-art in the surface chemistry of 1-D nanowires and 2-D nanoplatelets of CsPbBr 3 , which are more quantum confined than the corresponding cuboidal nanocrystals but also generally possess a higher defect density because of their increased surface area-to-volume ratios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strong brightness variations signal cloudy-to-clear transition of brown dwarfs

We report the results of a J-band search for cloud-related variability in the atmospheres of 62 L4-T9 dwarfs using the Du Pont 2.5 m telescope at Las Campanas Observatory and the Canada-France-Hawaii Telescope on Mauna Kea. We find 9 of 57 objects included in our final analysis to be significantly variable with >99% confidence, 5 of which are new discoveries. In our study, strong signals (peak-to-peak amplitudes >2%) are confined to the L/T transition (4/16 objects with L9-T3.5 spectral types and 0/41 objects for all other spectral types). The probability that the observed occurrence rates for strong variability inside and outside the L/T transition originate from the same underlying true occurrence rate is excluded at >99.7% confidence. Based on a careful assessment of our sensitivity to astrophysical signals, we infer that 39{sub −14}{sup +16}% of L9-T3.5 dwarfs are strong variables on rotational timescales. If we consider only L9-T3.5 dwarfs with 0.8 < J – K {sub s} < 1.5, and assume an isotropic distribution of spin axes for our targets, we find that 80{sub −19}{sup +18}% would be strong variables if viewed edge-on; azimuthal symmetry and/or binarity may account for non-variable objects in this group. These observations suggest that the settling of condensate clouds below the photosphere in brown dwarf (BD) atmospheres does not occur in a spatially uniform manner. Rather, the formation and sedimentation of dust grains at the L/T transition is coupled to atmospheric dynamics, resulting in highly contrasting regions of thick and thin clouds and/or clearings. Outside the L/T transition we identify five weak variables (peak-to-peak amplitudes of 0.6%-1.6%). Excluding L9-T3.5 spectral types, we infer that 60{sub −18}{sup +22}% of targets vary with amplitudes of 0.5%-1.6%, suggesting that surface heterogeneities are common among L and T dwarfs. Our survey establishes a significant link between strong variability and L/T transition spectral types, providing evidence in support of the hypothesis that cloud holes contribute to the abrupt decline in condensate opacity and 1 μm brightening observed in this regime. More generally, fractional cloud coverage is an important model parameter for BDs and giant planets, especially those with L/T transition spectral types and colors.

79 ASTRONOMY AND ASTROPHYSICS↗

A new interferometry-based electron density fluctuation diagnostic on Alcator C-Mod

The two-color interferometry diagnostic on the Alcator C-Mod tokamak has been upgraded to measure fluctuations in the electron density and density gradient for turbulence and transport studies. Diagnostic features and capabilities are described. In differential mode, fast phase demodulation electronics detect the relative phase change between ten adjacent, radially-separated ({Delta}R= 1.2 cm, adjustable), vertical-viewing chords, which allows for measurement of the line-integrated electron density gradient. The system can be configured to detect the absolute phase shift of each chord by comparison to a local oscillator, measuring the line-integrated density. Each chord is sensitive to density fluctuations with k{sub R} < 20.3 cm{sup -1} and is digitized at up to 10 MS/s, resolving aspects of ion temperature gradient-driven modes and other long-wavelength turbulence. Data from C-Mod discharges is presented, including observations of the quasi-coherent mode in enhanced D-alpha H-mode plasmas and the weakly coherent mode in I-mode.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗