Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Effect of Chromium Substitution on Structural and Magnetic Properties of Nickel-Cobalt Ferrite Nanoparticles Synthesized by Co-precipitation Method

Ni{sub 0.3}Co{sub 0.7}Cr{sub x}Fe{sub 2−x}O{sub 4} (x = 0, 0.2, 0.4, and 0.6) nanoparticles were synthesized by co-precipitation method followed by annealing treatment. The structural and magnetic properties of the samples were determined by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric and differential scanning calorimetry (TG-DSC) analysis, and a vibrating sample magnetometer (VSM) at room temperature. The XRD patterns revealed a single-phase cubic spinel structure for all the annealed products. The average crystallite size is in the range of 45–60 nm. Cation distribution by XRD analysis indicated that Cr{sup 3+} ions preferentially replace Fe{sup 3+} ions from the octahedral sites due to their favorable crystal field effects; with increasing Cr content, it was observed that Co{sup 2+} migrated from octahedral sites to tetrahedral sites. The decrease in saturation magnetization with the increase in Cr concentration could be attributed to reduction in the super-exchange interaction between the A and B sublattices. The observed decrease in coercivity can be explained by reduction in magneto-crystalline anisotropy that resulted from migration of Co{sup 2+} ions from B sites to A sites with the increase in Cr content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental and Theoretical Investigations of Magnetic Properties of Co Ferrite/Polyvinyl Alcohol Nanocomposites

Cobalt ferrite nanoparticles (NPs) have been synthesized by the modified co-precipitation technique in the presence of the polyvinyl alcohol (PVA) matrix. The structural and magnetic properties of NPs are tunable by means of interaction between the polymer and the surface of NPs. Magnetic properties of NPs were simulated using the accurate Monte Carlo (MC) method. In addition, the magnetic anisotropy constant has been obtained by means of the law of approach to saturation magnetization (LAS). The experimental and theoretical results are in good agreement with each other and show that the as-synthesized NPs are single domain and approximately non-interacting. The anisotropy constant and size of the NPs increase by increasing the concentration of precursors in the reaction medium. Nanocomposites have been characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Hysteresis loops were investigated at room temperature using a vibrating sample magnetometer (VSM). The crystallite size of single-domain NPs is lower than 20 nm, and the obtained results from FT-IR confirmed the interaction between PVA and the surface of the particles. These approximately non-interacting NPs are useful for magnetic data storage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nano-size Analysis through Magnetization Data for Developed Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm)

Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm) nano-ferrite were synthesized by chemical co-precipitation method. Magnetic measurements for the synthesized Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm) nano-particles were recorded at temperatures 10 and 300 K. Magnetic moment per unit formula in terms of Bohr magnetron (μ{sub B}) was calculated from magnetization data of hysteresis loops. Particle size was calculated from the magnetization data for all compositions of Mn{sub 0.5}Zn{sub 0.5}X{sub 0.2}Fe{sub 1.8}O{sub 4} (X = Fe, Gd, La, Sm) ferrite particles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Facile Low-Temperature Synthesis of MnLa{sub x}Fe{sub 2−x}O{sub 4} Nanoferrites with Structural and Electrical Characterization

A series of nanocrystalline lanthanum-substituted manganese ferrite having compositional formula MnLa{sub x}Fe{sub 2−x}O{sub 4} (x = 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by a chemical co-precipitation method. Phase analysis was carried out using XRD. It reveals the formation of spinel phase without any unwanted secondary phases. The formation of single-phase spinel structure was supported by FTIR studies. Microstructural study was carried out using SEM. Elemental composition was studied using EDX. Electrical properties namely frequency variation of dielectric constant, dielectric loss tangent, and ac conductivity of prepared nanoferrites were studied. The observed electrical properties were discussed and explained in terms of hopping mechanism of charge carrier in ferrites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of NaOH Concentration and Adding Sequences on Structural and Magnetic Properties of Ni{sub 0.4}Co{sub 0.6}Fe{sub 2}O{sub 4} Nanopowders Prepared Via Co-precipitation Route

Ni{sub 0.4}Co{sub 0.6}Fe{sub 2}O{sub 4} nanopowders were prepared via the co-precipitation route followed by annealing treatment. The structural and magnetic properties of the as-synthesized samples were determined by XRD, FT-IR, TG-DSC, and PPMS measurements, respectively. The XRD patterns indicated a single-phase cubic spinel structure for all the Ni-Co ferrite samples, regardless of adding sequences of the reactants or NaOH concentration. The analysis of the XRD patterns revealed that the enhancement in lattice constant with increasing NaOH concentration is related to the prevention of oxidization of Co{sup 2+} ions in the Ni-Co ferrite lattice. The FT-IR spectra indicated that samples prepared in the B process have fewer impurities than those prepared in the A process. The enhancement in saturation magnetization with the increase in sodium hydroxide concentration could be attributed to the strengthening of super-exchange interaction between A and B sublattices, due to replacements of Co{sup 3+} ions (magnetic moment of 0 μ{sub B}) by Co{sup 2+} ions (magnetic moment of 3 μ{sub B}) at B sublattices. The obvious increase in the coercivity field with the increase in concentration of NaOH solutions can be interpreted in terms of enhancement of magneto-crystalline anisotropy that originated from gradual substitutions of Co{sup 3+} ions with Co{sup 2+} ions at the octahedral sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and Property Research of Perfluoropolyether Oil-Based Ferrofluid

In this study, perfluoropolyether oil-based ferrofluid was prepared to satisfy special demands in applications which are too harsh to conventional ferrofluids. Fe{sub 3}O{sub 4} magnetic nanoparticles were synthesized by co-precipitation and modified by perfluoropolyether carboxylic acid surfactant in the atmosphere without protective gas. Perfluoropolyether oil-based ferrofluid was prepared with modified nanoparticles and perfluoropolyether by high-energy ball milling. Properties of ferrofluid fabricated were verified through a series of experiments. Ferrofluid stability was tested by interval point-density method; the average density change is merely 0.0077 g/ml, and change rate is 0.37% after 500 days. Saturation magnetization is 582.46 Gs, much larger than the other four ferrofluids. The average volatility rate is 7.4985*10{sup − 5} g/h/cm{sup 2} at 80 °C after 260 h. Viscosity increases to 1825.7 mPa⋅ s under − 20 °C and still have mobility at − 40 °C. The ferrofluid can resist air blast for 8 h under 200 °C without oxidation or decomposition. Perfluoropolyether oil-based ferrofluid cannot be damaged by water or organic solvents. In addition, the ferrofluid can survive in pH = 1 acid or pH = 14 alkali at least 279 days without corrosion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, Spectroscopy, and Magnetic Characterizations of PVP-Assisted Nanoscale Particle

Inverse spinel ferrite of nonmagnetic metal-doped ferro-ferric oxide was synthesized by co-precipitation technique, and its characterizations have been performed by XRD, FTIR, TEM, EDX, VSM, and EPR. XRD figures show the prepared samples in their cubic phase and that their crystallite faces vary from 5.57 to 18.47 nm. FTIR spectra of the as-synthesized samples were performed in the range of 400 and 4000 cm{sup −1} and annealed at 600 {sup ∘}C. The TEM revealed that the syllable construction of the nanoscale particles was agglomerated in their crystalline sample. From VSM study, the sample obtained has a doublet pattern, and ferromagnetic performance was observed from the samples. From EPR spectra, the line shape and the g values obtained for the samples conformed to superparamagnetic resonance due to Mg{sup + 2} ions with a stoichiometric composition. These typical magnetic hypnotic specifications are used for various sensing applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin State of Cobalt and Electrical Transport Mechanism in MgCo{sub 2}O{sub 4} System

MgCo{sub 2}O{sub 4} samples were synthesized by inverse co-precipitation method. The formation of a single-phase spinel structure was confirmed by X-ray diffraction measurements and Fourier-transform infrared spectroscopy. The samples crystallized in a face-centered cubic structure with Fd-3m space group as revealed from the Rietveld refinement of X-ray diffraction data. Magnetic measurements carried out in a broad temperature range of 5–300 K showed antiferromagnetic to paramagnetic phase transition (Neel temperature) observed at 101 K. Magnetic susceptibility data fitted using the Curie Weiss law and effective Bohr magnetic moment (μ{sub eff}) for Co atoms was determined. Calculated μ{sub eff} comes out to be 3.05 μ{sub B}. These results were correlated to the spin states of Co{sup 3+} atoms. A small hysteresis in the field-dependent magnetization MH loop taken at 5 K indicates the existence of weak ferromagnetism in this system. The electrical resistivity measurement in the temperature range 77–750 K displayed the semiconducting-like behavior for this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and Characterization of NiFe{sub 2}O{sub 4} Nanoparticles for the Enhancement of Direct Sunlight Photocatalytic Degradation of Methyl Orange

The current investigation shows the simple and direct sunlight-mediated photocatalytic degradation of methyl orange dye by quasi globular NiFe{sub 2}O{sub 4} nanocrystals synthesized from the high-temperature chemical co-precipitation method. The experiment was carried out under direct sunlight which shows significant degradation results lead to the practical possibility of heterogeneous photocatalysis towards environmental remediation. The as-synthesized quasi globular NiFe{sub 2}O{sub 4} nanocrystals also were characterized by well-known analytical measurements of their structural, morphological, bonding, surface area, band gap and magnetic properties prior to the photocatalytic experiments. The presence of active free radicals formed during the photocatalytic reaction was confirmed from the EPR signals recorded for the solution containing the photocatalyst and dye solution, and accordingly, the photocatalytic degradation mechanism was discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Magnetic Characteristics of Ferroxplana Co{sub 2}Y Nanoferrites Synthesized via Two Chemical Routes

Barium Y-type hexaferrite Ba{sub 2}Co{sub 2}Fe{sub 12}O{sub 22} nanopowders have been purposefully tailored using two different chemical wet methods, namely sol-gel auto-combustion (SGA) and co-precipitation (CP) routes. The impact of the pre-annealing and the annealing temperature of the formed precursors synthesized using two strategies on the structural, microstructure, and magnetic properties was investigated using x-ray diffraction (XRD), scanning electron microscopic (SEM), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM). For instance, well-defined Ba{sub 2}Co{sub 2}Fe{sub 12}O{sub 22} hexagonal plate-like particles was observed using SGA and CP routes for the precursors pre-annealed at 600 {sup ∘}C for 4 h and then annealed at low temperature 1000 {sup ∘}C for 2 h. The magnetic properties measured at room temperature evinced that hexaferrite Co{sub 2}Y particles have ferromagnetic characteristics. Good magnetic properties involving saturation magnetization (M{sub s}) of 23.64 and 24.37 emu/g and the coercivity (H{sub c}) of 417.76 and 280.92 Oe were accomplished for the samples pre-annealed at 600 {sup ∘}C for 4 h and then annealed at 1000 {sup ∘}C for 2 h for SGA and CP methods, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and Thermophysical Investigations of CoFe{sub 2}O{sub 4}-based Nanofluid: a Potential Heat Transfer Agent

Cobalt ferrite nanoparticles were synthesized by employing chemical co-precipitation technique. The structure, morphology, elemental composition, and magnetization studies of cobalt ferrite nanoparticles were carried by XRD, FE-SEM, EDS, and VSM techniques, respectively. Rietveld refined XRD pattern exhibited the single-phase cubic spinel structure with Fd-3m space group. FE-SEM images indicated some agglomeration of spherical grains which can be attributed to high surface energy and magnetic interactions. Presence of peaks of respective elements (Co, Fe, and O) in EDS spectrum showed formation of CoFe{sub 2}O{sub 4}. The M–H loop recorded at 300 K revealed superparamagnetic behavior and explained by fine particles size. The blocking temperature of the CoFe{sub 2}O{sub 4}nanoparticles from FC-ZFC curve was found to be 144 K. Cobalt ferrite–ethylene glycol nanofluids of various concentrations 0.0–1.0% in steps of 0.2% were prepared by ultrasonically assisted two-step technique. Thermophysical parameters such as thermal conductivity, specific heat, viscosity, and density were investigated as a function of both volume fraction and temperature. The experimental and theoretical value of each sample was correlated. The thermal conductivity was significantly enhanced with an increase in volume fraction and temperature.

36 MATERIALS SCIENCE↗

Infrared Spectroscopic Study of Magnetic Behavior of Dysprosium Doped Magnetite Nanoparticles

Dysprosium doped magnetite (Fe{sub 3−x}Dy{sub x}O{sub 4} with x = 0.0–0.1) nanoparticles have been synthesized using the co-precipitation method. Magnetic characterization using vibrating sample magnetometer (VSM) has revealed an enhancement in the saturation magnetization with Dy{sup 3+} doping. The occupancy of the dopant ions in magnetite lattice has been probed using Fourier transform infrared spectroscopy (FTIR). The shifting of ν{sub 2} (Fe–O) band at 452 cm{sup − 1} for undoped samples to 443 cm{sup − 1} for dysprosium-doped samples is indicative of occupancy of dysprosium at the octahedral site. X-ray diffraction (XRD) patterns have been used to calculate the strain and lattice constant. The strain is found to increase with doping level and attained a maximum value for the x = 0.03. This increase in the strain can be attributed to occupancy of large diameter Dy{sup 3+} ions at the octahedral site of spinel structure of the magnetite lattice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Physical Properties of Mn{sub 2}O{sub 3} Nanoparticles Synthesized by Co-precipitation Method at Different pH Values

Mn{sub 2}O{sub 3} nanoparticles were synthesized at different pH values ranging from 10 to 13 by co-precipitation technique. The characterization of all samples were completed by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR), ultraviolet-absorption spectroscopy (UV), Raman spectroscopy, and M–H loop measurements. The XRD spectra show that the structure of Mn{sub 2}O{sub 3} is cubic, and the lattice parameter a decreases as pH increases. Crystalline size, determined from TEM and XRD analyses, decreases as pH increases. TGA curves show that a mass loss is significantly affected as pH increases, indicating the decomposition of organic species besides the oxidation of Mn{sub 2}O{sub 3} to Mn{sub 3}O{sub 4}. FTIR spectra indicate that the absorption peaks at 593.73 and 519.09 cm{sup − 11} referred to the stretching vibration of Mn–O and Mn–O–Mn bonds during the synthesis of Mn{sub 2}O{sub 3} nanoparticles. UV-visible spectroscopy is measured in the range 250–800 nm and showed a deviation to the lower wavelength in addition to an increase in the band-gap energy (E{sub g}) values from 1.012 to 1.370 eV is obtained. Raman spectra shows a slight deviation to the left which is conversely proportional to the crystalline size. M–H loops for the prepared samples were measured and the results of retentivity (M{sub s}) and coercivity (H{sub c}) were discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Synthesis Approaches and Morphological Properties on Dielectric Enhancement and Microwave Absorption of Fe{sub 3}O{sub 4}/PANI Nanocomposites

In the present work, Fe{sub 3}O{sub 4} spherical (Fe{sub 3}O{sub 4}-cop) and raspberry-like (Fe{sub 3}O{sub 4}-hyd) nanoparticles were synthesized via co-precipitation and hydrothermal routes, respectively. Fe{sub 3}O{sub 4}/polyaniline (PANI) nanocomposites were prepared by in situ oxidative polymerization of aniline monomer in the presence of the Fe{sub 3}O{sub 4} materials. Characterization of the nanocomposites by XRD, FT-IR, FESEM, and TEM techniques revealed a core/shell structure for Fe{sub 3}O{sub 4}-hyd/PANI, unlike the PANI blocks with embedded Fe{sub 3}O{sub 4} and γ-Fe{sub 2}O{sub 3} observed in Fe{sub 3}O{sub 4}-cop/PANI composites. The larger and pure magnetite nanoparticles produced with the hydrothermal process and the respective nanocomposite with PANI possess higher magnetization and coercivity values, according to the magnetic investigation with VSM. Moreover, according to the electromagnetic characterization in the X-band, the Fe{sub 3}O{sub 4}-hyd/PANI nanocomposite exhibits the highest complex permittivity level, as a consequence of increased interfacial polarization in the Fe{sub 3}O{sub 4}-hyd/PANI system. On this account, reflection loss measurements have shown the superior microwave absorption capability of Fe{sub 3}O{sub 4}-hyd/PANI composite, compared with Fe{sub 3}O{sub 4}-cop/PANI, with a measured maximum of −31.28 dB at 8.5 GHz for 3.5 mm layer thickness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Zn Concentration on the Structure, Morphology, and Magnetic Behavior of Ni{sub 1 − x}Zn{sub x}Fe{sub 2}O{sub 4} Ferrofluid

In this work, we investigated the effect of doping zinc ions onto nickel ferrite upon the structure, morphology, and magnetic properties of Ni{sub 1 − x}Zn{sub x}Fe{sub 2}O{sub 4} ferrite nanoparticles (x = 0, 0.25, and 0.75) prepared via co-precipitation method. X-ray diffraction analysis showed the presence of the most intense peak corresponding to the (311) crystallographic orientation of NiFe{sub 2}O{sub 4} cubic spinel phase, and the crystallite size obtained from Scherrer formula increased from 6.8 to 11.2 nm when the Zn concentration increases from x = 0 to x = 0.75. Fourier transform infrared spectroscopy analysis confirmed the presence of a prominent band associated to the vibrations of metal ions, as a feature of spinel ferrite phase formation, observing that their band positions were very sensitive to Zn doping concentration. Transmission electron microscopy studies allowed to determinate that for all Zn concentrations, the particle sizes are around 15 nm. The magnetic properties were studied by using the vibrating sample magnetometer at room temperature. The results reveal superparamagnetic behavior determined by the shape of the hysteresis loop, presenting decreased coercive magnetic field and increased saturation magnetization, with increased zinc concentration. Additionally, from field cooling and zero field cooling curves, we can observe the typical behavior of the blocking process assembly of superparamagnetic nanoparticles. Alternate current susceptibility measurements show that the blocking temperature is frequency dependent and shifts toward higher temperatures by increasing the frequency, a characteristic of superparamagnetic, and glassy systems. Furthermore, τ{sub 0}, related to the jump attempt frequency of the magnetic moment of the nanoparticle between the opposite directions of the magnetization easy axis, is in the range of 2 × 10{sup −10} and 7 × 10{sup −13} s for the three different Zn concentrations, which agrees with characteristic of non-interacting superparamagnetic systems.

36 MATERIALS SCIENCE↗

Structural and Electrical Dependence in Zn-Doped Li-Ferrite Nanostructures

Zinc-doped lithium ferrite nanoparticles with general formula Li{sub 0.46}Zn{sub 0.04}Fe{sub 2.5}O{sub 4} were prepared by Co-precipitation method and their thin films were grown by spin coating method. X-ray diffraction (XRD) confirmed the spinel structure of the synthesized samples. Fine morphology of the films was obtained by controlling the parameters. AC electrical properties including dielectric constant (έ), dielectric loss tangent (tanδ), AC electrical conductivity (σ{sub ac}), and impedance (Z) were studied as a function of frequency at different temperatures and at 1 MHz frequency in a temperature range of 40–500 °C. Dielectric constant, dielectric loss tangent, and ac electrical conductivity showed the decreasing trend with increase in temperature while opposite trend was observed for impedance. Zinc-doped Li-ferrite has better absorption properties in the studied frequency and temperature range as compared to that of Li-ferrites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Optical, Dielectric, and Magnetic Characteristics of Nd Ions Substituted BaFe{sub 11}(Sn{sub 0.5}Mg{sub 0.5}){sub x}O{sub 19} M-Type Hexaferrite via Co-precipitation

Nanoparticles (NPs) of barium hexaferrite were synthesized by a chemical co-precipitation technique in an aqueous solution with a nominal composition of BaFe{sub 11}(Sn{sub 0.5}Mg{sub 0.5}){sub 1−x}Nd{sub x}O{sub 19} (x = 0, 0.5, 1). XRD and FTIR analyses were performed to study the crystal structure of the magnetic powders (MPs) in order to obtain details on the hexaferrite structure. Grain morphology and elemental composition were assessed by SEM and EDS, respectively, and nano-sized hexagonal platelet-like structures in all MPs were demonstrated. All of the structural parameters such as “a”, “c”, V{sub (cell)} and D{sub x} have been altered with successful incorporation of Nd into hexagonal lattices, thereby the band gap E{sub g} first increased x ≤ 0.5 then decreased up to x = 1 (i.e., drawn via a Tauc plot) from 1.53–1.82 eV. The measurements of dielectric properties depict relaxation behavior at higher frequencies. The dielectric measurements increase with increased hexaferrite. Furthermore, the magnetic properties of all MPs were examined by VSM at room temperature (RT). The saturation magnetization (M{sub s}), remnant magnetization (M{sub r}), and coercivity (H{sub c}) were linearly decreased by the SnMg content, whereas an increasing trend appeared with the additional Nd content. However, the squareness ratio increased with an increase in the content (x). These outcomes make this substitution an excellent candidate for multiple applications such as optical, electrical-based devices, circulators, and recording materials. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of Electrical and Magnetic Properties of La{sup 3+} Substituted M-Type Ba–Ni Nano-Ferrites

In this paper, La{sup 3+} substituted M-type Ba–Ni hexaferrite nanoparticles having composition Ba{sub 0.8}Ni{sub 0.2}Fe{sub 12-x}La{sub x}O{sub 19} (x = 0, 0.2, 0.4, 0.6, and 0.8) were prepared by co-precipitation route. The phase of the grown NPs was confirmed using X-ray diffraction analysis and results reveal the growth of M-type hexaferrite NPs as a major phase. The energy dispersive X-ray spectroscopy (EDX) was employed to determine the elemental composition of prepared samples. The FTIR spectra of synthesized samples confirm the bond formation of M-type hexaferrites. The optical bandgap was determined by UV-Vis spectroscopy and the results exhibit an increase in optical bandgap with decreasing crystallite size. The vibrating sample magnetometry (VSM) technique was used to analyze the effect of dopant on the magnetic properties like coercivity, saturation magnetization, and remanence of the synthesized samples. The electrical resistivity was measured by two probe method and it was observed that the activation energy shows a decreasing trend with increase in La content. The highly resistive nature of prepared nano ferrites indicates the potential to use these ferrites for high-frequency applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗