Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMMUNICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Flight and Direct to Earth/Space Relay Communication System Architecture for GSFC CubeSat Missions

The CubeSat platform is finding increasing use in space science applications due to its low cost and comparative ease of launch. It is becoming a key scientific discovery tool in low Earth orbit (LEO) and beyond, including geosynchronous equatorial orbit (GEO), the Lagrange Points, Lunar missions, and more. The increasing complexity of these missions and their scientific goals must be supported by equal advancements in communications technology. Higher data rates and greater reliability are required every year. However, the reduced Size, Weight, and Power (SWaP) constraints of CubeSat platforms introduce unique challenges in the area of satellite communications. There is currently a lack of communication equipment tailored specifically to the CubeSat platform. This lack of standardized, tested equipment extends development time and reduces mission confidence. Furthermore, missions utilizing the CubeSat platform are often subject to more difficult design constraints. Antenna placement, size, and pointing are often subordinate to the requirements of the payload instruments and mission goals. Traditional link margin estimation techniques are insufficient in these cases, as they emphasize worst case scenarios. In reality the actual link parameters may vary widely even during a single pass. This presents new challenges in predicting communications performance and scheduling ground station contacts, but also new opportunities for improving efficiency. This paper presents the integration, testing, and validation process for a new software defined radio (SDR) designed for the CubeSat platform in conjunction with Vulcan Wireless, Inc. The SDR is planned for use on 5 upcoming CubeSat missions at NASAs Goddard Space Flight Center (GSFC) including a Geosynchronous Transfer Orbit (GTO) mission and it may also serve as a standard and well-tested option for future missions by enabling a standardized, rapid and low cost CubeSat communication system network integration process. Detailed simulations have been developed to estimate the communication performance of these missions, taking the unique antenna placements and attitude behavior of each satellite into account. These simulations allow a much more accurate analysis of the expected link margin, which varies considerably during each pass for the NASA Space Relay (SR) and Direct to Earth (DTE) network. The modelling procedures are outlined, and the results are used to predict communications performance of the missions.

Space Networks↗
NASA NTRS2024

Communications System Concept of Operations (ConOp) for Supporting Second Shift (SS) Operations

Wildland fires take place most often in remote areas without access to communications infrastructure. Communication during wildfire operations is crucial for safe and effective command and control of air assets, ground-based firefighters, and fire management. Without connectivity, Incident Command (IC) cannot exchange information, receive alerts or work with all parties involved in the wildfire suppression operation. Current policy directs IC to use voice radio communications, which require no prior infrastructure, to provide information needed for the command, control and safety of personnel and resources. Cellular communications are used only for logistical purposes unless no other method is available. To address some of the shortcomings of the current state of communications, the Advanced Capabilities for Emergency Response Operations (ACERO) Second Shift (SS) technical team is developing characteristics of an air-to-ground Mesh Radio System (MRS) and preparing for a future demonstration. The MRS will allow air and ground assets to automatically join a radio network without relying on existing infrastructure and exchange information critical to maintaining situation awareness and air traffic management by the onsite IC. The MRS will also give users more options for communications in addition to voice communications.

David Fuller↗
NASA NTRSDate not supplied

Addressing the High-Rate Deep Space Communications Shortfall in NASA’s Space Technology Mission Directorate's Envisioned Future

NASA’s Space Technology Mission Directorate (STMD) has identified key technologies needed for future crewed and robotic exploration and science missions. STMD is helping to build the civilian technology base by working with other NASA Mission Directorates, other United States government agencies, commercial industry, and academia to identify technology shortfalls and to develop plans to address them. One critical area of shortfalls lies with deep space communications and navigation. While NASA had huge success to date with the Deep Space Network (DSN), recent studies have shown that without enhancements to current systems, the DSN will be unable to support the anticipated increases in the pace of space exploration or the expected higher data rates from deep space needed soon without severely impacting other missions. High-rate communications from the Moon and beyond is needed to enable future exploration and science missions currently being developed or under consideration. For example, a robust communications infrastructure will be needed to support a sustained human presence on the Moon and its eventual industrialization. High data rate trunk lines between the Earth and the Moon are needed to reduce the number of individual links. The human exploration of Mars will also require high-rate communications between Earth and Mars. Return data rates to Earth from Mars for a single link, for example, are anticipated to be greater than 100 Mb/s; forward data rates to Mars, based on experience from the International Space Station, are anticipated to be greater than 20 Mb/s. Future deep space science missions will also require higher data rates than possible with today’s technology and the current capabilities of the DSN. To support future exploration and science needs, it will be necessary to upgrade the DSN to enhance its radio frequency (RF) capabilities. In addition, it is envisioned that NASA will gradually introduce optical communications to augment its RF systems. Optical communications will enable new science and exploration missions by providing high data rates and better navigation over long distances. This paper will briefly describe STMD’s envisioned future for deep space communications in the 2030+ timeframe and the technology roadmaps being developed for both radio frequency and optical systems.

Bernard Edwards↗
NASA NTRSDate not supplied

Preliminary Assessment of the Impact on the V-Band Oxygen Channels From Satellite Communication Uplinks

We calculate the percentage of time that an ATMS-like instrument [1] will be illuminated by the uplink beam of one of the proposed V-band communication system and estimate the damage resulting from such exposure. Using a combination of openly available information and educated guesses about the location and characteristics of the up/down link terminals, we constructed the ground segment of a hypothetical high-speed communication network. The space segment of the network was constructed from the orbital data of the existing Starlink constellation [2] of 6223 communication satellites (comsats) which is used as strawman to represent any other possible constellation of communication satellites. It is shown that without a very delicate balance of frequency allocations (science vs telecommunications), coupled with extremely steep and deep bandpass-defining filters, and strict adherence to the agreed limits (i.e. no out-of-band transmissions) the deployment of the telecommunication network leads to almost-complete loss of some important geophysical data. For the analysis we use the spectral characteristics of the ATMS instrument with the ephemeris for the NOAA-21 satellite [3]. The analysis is conducted for the USA and the simulation covers 8 consecutive days in July 2024. Effective and accurate microwave remote sensing of the atmosphere depends on the availability of interference-free spectrum windows at frequencies which are prescribed by physical processes [e.g. 4]. The family of resonant lines of the oxygen molecule near 60 GHz provides a unique opportunity to sample the vertical distribution of temperature and density from space, and it has been exploited for weather and climate studies from polar-orbiting satellites since 1978 (MSU on TIROS-N [5]). It remains a staple in the payloads operated by Russia, China, USA, Japan, France, India, UK, Ukraine [6] which are built around a common blueprint: a few wide-band (hundreds of MHz) channels around 50 GHz to sample the atmosphere and the surface while several more channels with high spectral resolution (few MHz) sample the individual resonant lines. Accurate retrieval of the environmental parameters depends upon the data provided by both sets of channels, and the their location in frequency space is not arbitrary and cannot be altered at will [7, 8]. The introduction of 5G technology in 2019 has driven telecommunication companies to request more bandwidth to be dedicated to their devices. This additional bandwidth is only available in spectral regions traditionally reserved for environmental and astrophysical research, such as the V-band between 50 and 60 GHz for up/downlink between satellites in low-earth orbits and terminals connected to fiberoptics network for distribution to high-speed local internet services. The power broadcast by the uplink communication leg is many orders of magnitude greater than the natural thermal signal emitted from the Earth scene. If the ground antenna were to perfectly align with the passive instrument’s antenna, the spaceborne receiver would suffer permanent, irreparable damage. While a direct boresight-to-boresight conjunction is extremely unlikely (even with a large constellation of satellites the fraction of the celestial sphere occupied by the satellites remains minuscule) the finite size of the ground station’s antenna beam in the sky suggests that the ATMS will be in the near background (as seen from the ground station) of one of the communication satellites and will be illuminated by either the main lobe or the near sidelobes of the uplink antenna more often than it is desirable. For our analysis we first calculate the position of the ATMS with respect to each of the ground stations at a resolution of 0.2 sec, then calculate the position of each of the comsats which are at least 25 deg above the station’s local horizon; finally we calculate the angle between the line-of-sight of the ATMS and the line-of-sight of the comsat. We assume that the gain pattern of the ground station is circularly symmetric; the angle-off-station-boresight then provides an attenuation of the uplink power which we use to assess the likely effect upon the passive instrument’s operations. We assume that each ground station can communicate with all the comsats in its field of view; this implies that, on average, a ground station can engage with 46 comsats simultaneously. The analysis is repeated for the case when the uplink broadcast within the ATMS passive channels (in-band scenario) and for the case when the uplink is limited to frequencies adjacent to the ATMS channels (out-of-band scenario). The antenna of the ground station is modelled as having a HPBW (Half-Power Beam Width) of 0.16 deg and EIRP (Equivalent Isotropic Radiated Power) of 70 dBW. We account for the geometric dissipation of the signal caused by the satellite orbital altitude, the attenuation induced by atmospheric gasses at 51 GHz and the mismatch between the circular polarization of the ground-based transmitting antenna and the linear polarization of the satellite-borne receiving antenna. The damages on ATMS are estimated from bench-level measurement conducted at the ATMS’ manufacturer facilities [unpublished].

passive microwave↗
DOE OSTI2014

Processing module operating methods, processing modules, and communications systems

A processing module operating method includes using a processing module physically connected to a wireless communications device, requesting that the wireless communications device retrieve encrypted code from a web site and receiving the encrypted code from the wireless communications device. The wireless communications device is unable to decrypt the encrypted code. The method further includes using the processing module, decrypting the encrypted code, executing the decrypted code, and preventing the wireless communications device from accessing the decrypted code. Another processing module operating method includes using a processing module physically connected to a host device, executing an application within the processing module, allowing the application to exchange user interaction data communicated using a user interface of the host device with the host device, and allowing the application to use the host device as a communications device for exchanging information with a remote device distinct from the host device.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Microgrid Communications Using the Open-Source Open Field Message Bus (OpenFMB) Framework Applied to a 480V, 100kW Laboratory Microgrid

Microgrids require an extensive communication infrastructure to allow interoperability between the microgrid controller and assets. However, the lack of standardization of data structures combined with the variety of communication protocols poses several challenges to the implementation of a communication network. This paper presents an application of the open-source Open Field Message Bus (OpenFMB) framework to simplify the communication layer in microgrids. This work leverages the OpenFMB protocol translation and data model extensions to reduce the complexity in the microgrid communications. Conducted in a laboratory microgrid, the case study demonstrates how the OpenFMB provides predefined data models and simplifies the communication layer by providing information exchange between multiple legacy communication protocols.

Ferrari Maglia, Max↗
DOE OSTI2016

Reliability Assessment of Safety-Critical Network Communication in a Digitalized Nuclear Power Plant

In analog instrumentation and control (I and C) systems for nuclear power plants (NPPs), most connections are comprised of hardwired point-to-point types. Since they are based on analog technologies, they are fragile to noise and require analog-to-digital conversion time. Therefore, many NPPs have adopted communication network for the exchange of safety-critical data between programmable logic controllers (PLCs) in digital I and C systems to effectively accommodate a huge number of field controllers. However, the primary issue of digital network communication in a safety-critical system involves potential hazards, such as partial or total loss of communication between PLCs, which may result in a failure of safety critical signal generation when it is needed. Therefore, the probability that a safety-critical system in digitalized NPP becomes unsafe due to a network failure must be evaluated to quantify the risk of digital I and C system. In Korea, the Engineered Safety Feature-Component Control System (ESF-CCS) was developed as one of the digital safety-critical system in Advanced Power Reactor- 1400 (APR-1400). The function of a digital engineered safety feature (ESF) actuation system and field actuator controllers of conventional NPPs are performed by the ESF-CCS. In this system, safety-critical network, High Reliable- Safety Data Network (HR-SDN), was employed for the safety-critical data transmission from group controllers (GCs) to loop controllers (LCs). In this study, a framework for assessing the reliability of a HR-SDN network communication between GCs and LCs in the ESF-CCS in addition to a fault-tree model for ESF components considering network failure between GCs and LCs were developed to assess the plant risk effect of a newly developed digitalized ESF-CCS. Based on the case studies and cut set analysis, the risk effect of network failure on plant risk and the important risk contributors of network failure were quantitatively addressed. A framework for identifying the potential hazardous states of network communication in the ESFCCS was proposed. In addition, a fault-tree model for network communication failure was developed to estimate the risk effects of network failure between the GCs and LCs on ESF-CCS signal failure. The developed fault-tree model was then applied to several case studies. The fault-tree model of ESF-CCS signal failure for ESF components required for various mitigation actions regarding NPP DBAs was designed by considering the identified hazardous states of network failure that would result in a failure to provide input signals to the corresponding LC. As a sensitivity study, three case studies were performed based on the periodic test methods for hardware components in HR-SDN module and their test intervals in this study. The quantitative results for three case studies demonstrated that the probability of overall network communication failure, which was calculated as the sum of the failure probability associated with each failure cause, contributed up to 1.58% on the Small-LOCA CD frequency. The results also revealed the important basic events related to network failure in the case studies which included CCF of hardware and software in HR-SDN module. This study is expected to provide insight into the development of the fault-tree model for the network failure in digital I and C system and into the quantification of the risk effect of network failure for safety-critical data transmission in NPPs. As a further study, the risk effects of network failure in the ESF-CCS on the plant risk can be estimated in a more detailed manner by analyzing the failure modes and causes in a sub-component level and the fault detection coverage of the fault tolerance techniques for network failure implemented in ESF-CCS after the detailed configuration of ESF-CCS is decided. In terms of the failure of manual ESF actuation, the relationship among the human action failures must be investigated to consider multiple human error condition since ESF-CCS provides multiple manual actuation to assure the diversity of the system. Since the conventional HEP method cannot accommodate the multiple conditions in a fault tree, condition-based human reliability assessment (CBHRA) method or the dynamic human reliability modeling approach can be applied to include a complex relationship among the automated safety signal generation and the human operator's manual actuation, avoiding the optimistic estimation of HEP of the human action failure.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2014

Intuitive Tools for the Design and Analysis of Communication Payloads for Satellites

In an effort to make future communications satellite payload design more efficient and accessible, two tools were created with intuitive graphical user interfaces (GUIs). The first tool allows payload designers to graphically design their payload by using simple drag and drop of payload components onto a design area within the program. Information about each picked component is pulled from a database of common space-qualified communication components sold by commerical companies. Once a design is completed, various reports can be generated, such as the Master Equipment List. The second tool is a link budget calculator designed specifically for ease of use. Other features of this tool include being able to access a database of NASA ground based apertures for near Earth and Deep Space communication, the Tracking and Data Relay Satellite System (TDRSS) base apertures, and information about the solar system relevant to link budget calculations. The link budget tool allows for over 50 different combinations of user inputs, eliminating the need for multiple spreadsheets and the user errors associated with using them. Both of the aforementioned tools increase the productivity of space communication systems designers, and have the colloquial latitude to allow non-communication experts to design preliminary communication payloads.

communication↗
NASA NTRS2016

Aerospace Communications Technologies in Support of NASA Mission

NASA is endeavoring in expanding communications capabilities to enable and enhance robotic and human exploration of space and to advance aero communications here on Earth. This presentation will discuss some of the research and technology development work being performed at the NASA Glenn Research Center in aerospace communications in support of NASAs mission. An overview of the work conducted in-house and in collaboration with academia, industry, and other government agencies (OGA) to advance radio frequency (RF) and optical communications technologies in the areas of antennas, ultra-sensitive receivers, power amplifiers, among others, will be presented. In addition, the role of these and other related RF and optical communications technologies in enabling the NASA next generation aerospace communications architecture will be also discussed.

Communications Architectures↗
NASA NTRSDate not supplied

Advances in Autonomous Communications and Operations: Tes-N Series

Advances in nanosat subsystems over the past decade have taken the CubeSat standard from a communication-limited educational tool to a powerful platform enabling space research. The potential for autonomous operations may greatly increase the capability of downlinking even larger data sets. This is enabled through miniaturization of software-defined radio/cognitive communication solutions and a rapidly growing number of ground stations and satellite network crosslinks. The TechEdSat-n orbital flight series is currently demonstrating experiments using cognitive communication concepts including User Initiated Service (UIS) and High-rate Delay Tolerant Networks (HDTN), which show a significant step toward improved capability. At the core of this is the use of the Iridium L-band Short Burst Data (SBD) modems, pioneered by TES-n for space applications. SBD enables unique rapid command, control, and scheduling to initiate the UIS and HDTN protocols. This occurs by performing GPS-assisted on-orbit ephemeris determination, enabling negotiation with high bandwidth ground assets to repeatedly downlink over a specific commercial or government-owned ground station. The technique is RF band-agnostic and may be extended to higher bandwidth stations and SDRs. This may also include free-space optical communication, through both laser and omnidirectional LEDs, which can provide an attractive protocol for downlinking very large datasets over far fewer ground stations. In addition, this may be extended to lunar applications for such future concepts as LunaNet, whereby scheduling and cognitive technologies can assist in greatly improving Earth downlink capabilities with ground stations which will see greater competition for usage. Lastly, the NASA Communication Service Program (CSP), intended to eventually replace the NASA Tracking and Data Relay Satellite System (TDRSS) will also demonstrate the feasibility of commercially-provided satellite communication capabilities. All of these combined advances, including large advances in on-board computation on small platforms, will result in more remarkable data processing capability – yielding even more as of yet unknown discoveries.

Autonomy↗
DOE OSTI2016

The impact of socio-technical communication styles on the diversity and innovation potential of global science collaboratories

Emerging cyber-infrastructure tools are enabling scientists to transparently co-develop, share, and communicate about real-time diverse forms of knowledge artifacts. In these environments, communication preferences of scientists are posited as an important factor affecting innovation capacity and robustness of social and knowledge network structures. Scientific knowledge creation in such communities is called global participatory science (GPS). Recently, using agent-based modeling and collective action theory as a basis, a complex adaptive social communication network model (CollectiveInnoSim) is implemented. This work leverages CollectiveInnoSim implementing communication preferences of scientists. Social network metrics and knowledge production patterns are used as proxy metrics to infer innovation potential of emergent knowledge and collaboration networks. The objective is to present the underlying communication dynamics of GPS in a form of computational model and delineate the impacts of various communication preferences of scientists on innovation potential of the collaboration network. Ultimately, the insight gained can help policy-makers to design GPS environments and promote innovation.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2019

A cost-effective 100 Gbps SAC-OCDMA–PDM based inter-satellite communication link

Satellite communication is one of the pioneer technologies to provide seamless communication across the globe. With large number of satellites deployed in the space, inter-satellite communication has become an important phenomenon for researchers to establish communication link between satellites. In this work, a cost-effective inter-satellite communication system is proposed by using spectral amplitude coding based on optical code division multiplex access technique and polarization division multiplexing scheme. Ten channels, each carrying 10 Gbps non-return to zero encoded data, are transmitted over 25,000 km inter-satellite optical wireless communication (Is-OWC) link. Furthermore, Is-OWC is subjected to space turbulences such as transmitting and pointing errors. The reported results show the successful transmission of 100 Gbps data over Is-OWC link.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

The design and research of anti-color-noise chaos M-ary communication system

Previously a novel chaos M-ary digital communication method based on spatiotemporal chaos Hamilton oscillator has been proposed. Without chaos synchronization circumstance, it has performance improvement in bandwidth efficiency, transmission efficiency and anti-white-noise performance compared with traditional communication method. In this paper, the channel noise influence on chaotic modulation signals and the construction problem of anti-color-noise chaotic M-ary communication system are studied. The formula of zone partition demodulator’s boundary in additive white Gaussian noise is derived, besides, the problem about how to determine the boundary of zone partition demodulator in additive color noise is deeply studied; Then an approach on constructing anti-color-noise chaos M-ary communication system is proposed, in which a pre-distortion filter is added after the chaos baseband modulator in the transmitter and whitening filter is added before zone partition demodulator in the receiver. Finally, the chaos M-ary communication system based on Hamilton oscillator is constructed and simulated in different channel noise. The result shows that the proposed method in this paper can improve the anti-color-noise performance of the whole communication system compared with the former system, and it has better anti-fading and resisting disturbance performance than Quadrature Phase Shift Keying system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Experimental Test Bed to Enable Realistic Evaluations for Direct Transfer Trip Relaying via Private Wireless LTE Communications

Increasing penetration levels of inverter-based distributed energy resources (DERs) in distribution systems are creating challenges in system operation. Currently, wired or proprietary wireless communications are used by advanced distribution management systems (ADMS) to detect the state of the system and control the DERs for optimal operation. Wireless communications are an alternative solution that can enable connectivity between the dispersed assets used in distribution system applications. This paper demonstrates an experimental test bed to enable the realistic evaluation of communications system characteristics for direct transfer trip (DTT) relaying of a photovoltaic inverter system using a private 900-MHz spectrum wireless LTE network. Private LTE network communications can be deployed to many remote DERs and other grid-edge devices to prevent costly infrastructure upgrades across distribution systems. In addition, this paper provides a framework for evaluating the impact of signal strength and network traffic in communications systems. The results shown develop a better understanding of the best practices for using LTE communications systems across multiple utility applications, such as protective relaying, voltage regulation, and supervisory control and data acquisition system messages.

900-MHz LTE network↗
DOE OSTI2020

PredCom: A Predictive Approach to Collecting Approximated Communication Traces

Communication traces collected from MPI applications are an important source of information for performance optimization as they can help analysts determine communication patterns and identify inefficiencies. However, their collection, especially at scale, is time consuming, since it usually requires running the complete target application on a large number of nodes. In this work, we present PredCom, a tool-chain to generate a predictive communication proxy based on information gathered from a few small scale runs, which allows us to extract approximate communication traces with an accuracy high enough for most analysis goals. For this, we combine LLVM passes on the original source code (to capture static program structure) with parameter prediction (to capture dynamic and scaling behavior). This approach drastically reduces the time needed for collecting the communication traces, even for traces on large numbers of MPI processes. Here, we demonstrate that PredCom generates communication traces of various applications up to 1612x faster with an accuracy loss of 0.11 on average compared to the original large-scale traces, and we show that the generated traces can be used to optimize process placement.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Smart Meter Pinging and Reading Through AMI Two-Way Communication Networks to Monitor Grid Edge Devices and DERs

Today’s power distribution system is changing to a power-electronics-enabled distribution system, especially with the increasing penetration of distributed energy resources (DERs). To monitor and manage those electronic devices and DERs at the grid edge, the advanced metering infrastructure (AMI) with two-way communications presents great potential. At present, extensive research explores the upstream communication from smart meters to electric utilities (e.g., meter reading) but few examine the downstream communication from the utilities to smart meters (e.g., meter pinging). This article discusses the AMI two-way communication and its recent industrial practice in the U.S., especially for applying the smart meter pinging functionality to monitor grid-edge devices and DERs. This paper then develops the two-way communication model and the network calculus method to quantify the impact of the two-way communication on the AMI network. In the end, the proposed method is validated with ns-3 simulation using the modified 13-node test feeder and real-world feeder systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Triton Initiative: FY 2024 Communications, Outreach, and Engagement End-of-Year Report

The Department of Energy (DOE) Water Power Technologies Office (WPTO) Triton Initiative works to reduce barriers to permitting of marine energy testing and installation through environmental monitoring research that can help inform decision-makers on potential environmental effects associated with these systems. Communications, outreach, and engagement efforts are critical to Triton's success, which involves facilitating the effective communication and dissemination of environmental monitoring research information and results to end-users and fostering collaborations between researchers and industry partners to address the most pressing needs of this emerging industry. The Triton Initiative's communications, outreach, and engagement (TCOE) foundational goals are to educate and raise awareness of ME and the role of Triton's environmental monitoring research in supporting the industry, build trust with audiences through transparent communications and outreach, and evaluate and refine TCOE tactics based on feedback and metrics. The TCOE FY 2024-specific objectives were to (1) refine and grow Triton's audience network by reaching new individuals and communities within Triton's target audience base, and (2) improve the strategy and evaluation of TCOE efforts to demonstrate the value of communications and outreach for the ME community. This report presents the results and analysis of communications activities from September 1, 2023 through August 31, 2024. We assess the TCOE target audiences, highlight notable successes and lessons learned from FY2024, and identify the most effective channels and activities used to connect with those audiences to achieve the TCOE goals.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

Implementing Fuel Cladding Bonding and Assessing its Impact on Axial Gas Communication

Fuel rods irradiated in light-water reactors to burnup values above 45 MWd/kgU are subject to the formation of a chemical and mechanical bond between the fuel and cladding upon gap closure. The formation of the bond subsequently inhibits the ability of fission gases released from the fuel to flow freely to the plenum of the rod. The flowing of gases within fuel rods is referred to as axial gas communication. During transients, such as loss of coolant accidents, the bond may influence cladding deformation prior to breaking. Upon bond breakage, gases are able to more freely communicate to the lower pressure regions of the rod. The impact of bonding on gas communication and the ballooning behavior of the cladding during a loss of coolant accident is of interest to the nuclear industry in support of burnup extension for the existing light-water reactor fleet. In this report, a model to capture the effects of fuel cladding bonding in the BISON fuel performance code is presented. The theory of the model along with implementation testing is provided. A summary of a previously developed axial gas communication is given to set the stage for how the two models may be coupled together. A full-length pressurized-water reactor fuel rod demonstration is highlighted to evaluate the impact of including bonding on axial gas communication calculations using a preliminary coupling methodology. An overview of the next steps regarding the modeling of bonding, axial gas communication, and a more tightly coupled framework is also provided.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗