Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Biological Conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

In-Situ Catalytic Fast Pyrolysis Technology Pathway

This technology pathway case investigates converting woody biomass using in-situ catalytic fast pyrolysis followed by upgrading to gasoline-, diesel-, and jet-range hydrocarbon blendstocks. Technical barriers and key research needs that should be pursued for this pathway to be competitive with petroleum-derived blendstocks have been identified.

09 BIOMASS FUELS↗

Water content and the conversion of phytochrome regulation of lettuce dormancy

In an effort to determine which biological reactions can occur in relation to the water content of seeds, the regulation of lettuce seed dormancy by red and far red light was determined at various hydration levels. Far red light had an inhibiting effect on germination for seeds at all moisture contents from 4 to 32% water. Germination was progressively stimulated by red light as seed hydration increased from 8 to 15%, and reached a maximum at moisture contents above 18%. Red light was ineffective at moisture contents below 8%. Seeds that had been stimulated by red light and subsequently dried lost the enhanced germinability if stored at moisture contents above 8%. The contrast between the presumed photoconversion of phytochrome far red-absorbing (Pfr) to (Pr) occurring at any moisture content and the reverse reaction occurring only if the seed moisture content is greater than 8% may be explained on the basis of the existence of unstable intermediates in the Pr to Pfr conversion. Our results suggest that the initial photoreaction involved in phytochrome conversion is relatively independent of water content, while the subsequent partial reactions become increasingly facilitated as water content increases from 8 to 18%.

Non-NASA Center↗

Electrochemical Lignin Conversion

Lignin is the largest source of renewable aromatic compounds, making the recovery of aromatic compounds from this material a significant scientific goal. Recently, many studies have reported on lignin depolymerization and upgrading strategies. Electrochemical approaches are considered to be low cost, reagent free, and environmentally friendly, and can be carried out under mild reaction conditions. Here, different electrochemical lignin conversion strategies, including electrooxidation, electroreduction, hybrid electro-oxidation and reduction, and combinations of electrochemical and other processes (e.g., biological, solar) for lignin depolymerization and upgrading are discussed in detail. In addition to lignin conversion, electrochemical lignin fractionation from biomass and black liquor is also briefly discussed. Finally, the outlook and challenges for electrochemical lignin conversion are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering Bioelectronic Signal Transduction Using the Bacterial Type III Secretion Apparatus

Engineering efficient methods for living systems to transfer electrical energy to non-living systems, at relevant size scales, continues to challenge our knowledge of materials and biology. Our goal was to enable signal transduction between cells and inorganic materials, using controlled electron transport as the energy transfer mechanism. We envision using the cell as a living battery, providing a set of environmental signals to trigger synthetic biological networks that divert intracellular electron transport pathways to inorganic extracellular structures. Conversely, changing electron influxes could guide cellular responses. It is challenging, however, to precisely engineer nanostructured materials to achieve controllable catalytic or electronic properties and connect them with biological energy sources. Our approach to this problem is to engineer protein scaffolds, taking advantage of the native recognition, selectivity and self-assembly properties of these nano-scale building blocks as well as their native intracellular localization patterns. We are using a type III secretion system (T3SS) needle protein from Salmonella enterica, PrgI, as a template for metal nanowire synthesis for biosensing and bioenergy applications. We demonstrate that purified PrgI monomers spontaneously self assemble into long filaments, and that high-affinity peptide tags specific for attachment to functionalized particles can be integrated into the N-terminal region of PrgI. The resulting filaments selectively bind to gold, whether the filaments are assembled in vitro, sheared from cells, or remain attached to live S. enterica cell membranes. Chemical reduction of the gold modified PrgI variants results in structures that are several microns in length and which incorporate a contiguous gold surface.

59 BASIC BIOLOGICAL SCIENCES↗

Biological Parts for Plant Biodesign to Enhance Land-Based Carbon Dioxide Removal

A grand challenge facing society is climate change caused mainly by rising CO 2 concentration in Earth’s atmosphere. Terrestrial plants are linchpins in global carbon cycling, with a unique capability of capturing CO 2 via photosynthesis and translocating captured carbon to stems, roots, and soils for long-term storage. However, many researchers postulate that existing land plants cannot meet the ambitious requirement for CO 2 removal to mitigate climate change in the future due to low photosynthetic efficiency, limited carbon allocation for long-term storage, and low suitability for the bioeconomy. To address these limitations, there is an urgent need for genetic improvement of existing plants or construction of novel plant systems through biosystems design (or biodesign). Here, we summarize validated biological parts (e.g., protein-encoding genes and noncoding RNAs) for biological engineering of carbon dioxide removal (CDR) traits in terrestrial plants to accelerate land-based decarbonization in bioenergy plantations and agricultural settings and promote a vibrant bioeconomy. Specifically, we first summarize the framework of plant-based CDR (e.g., CO 2 capture, translocation, storage, and conversion to value-added products). Then, we highlight some representative biological parts, with experimental evidence, in this framework. Finally, we discuss challenges and strategies for the identification and curation of biological parts for CDR engineering in plants.

59 BASIC BIOLOGICAL SCIENCES↗

U.S. Department of Energy Basic Research Opportunities in Genomic Science to Advance the Production of Biofuels and Bioproducts from Plant Biomass: White Paper

The Genomic Science program of the Office of Biological and Environmental Research (BER) within the U.S. Department of Energy (DOE) Office of Science focuses on understanding microbes, microbial communities, and plants as integrated systems of relevance to DOE’s energy and environmental missions. One aspect of the program seeks to develop the fundamental science, research technologies, and knowledgebase necessary to enable the cost-effective, sustainable production of biofuels and bioproducts from plant biomass. This initial potential of biomass was outlined in the Billion-Ton Study (U.S. DOE 2005; update, U.S. DOE 2011a). Achieving multiple societal benefits underlies DOE’s research efforts to support a viable and sustainable domestic lignocellulosic advanced biofuels and bioproducts industry. These benefits include ensuring future energy security, lowering greenhouse gas production to mitigate climate impacts, diversifying the range of available biobased products, producing less toxic chemicals and byproducts, creating jobs in rural areas, and improving the U.S. trade balance. An earlier DOE workshop sought ways to realize these benefits by accelerating the emergence of a robust, new cellulosic ethanol industry. The resulting report, Breaking the Biological Barriers to Cellulosic Ethanol (U.S. DOE 2006), outlined a path toward this future, emphasizing integrated research opportunities, from feedstock development to conversion technologies.

09 BIOMASS FUELS↗

Assessing the Importance and Impact of Glycomics and Glycosciences Phase II

Glycans form one of the four basic classes of macromolecules in living systems, along with nucleic acids, proteins, and lipids. They are composed of individual sugar units that can be linked to one another in multiple ways, enabling them to form complex three-dimensional structures. In living systems, glycans are involved in myriad processes that are part of normal cellular physiology, development, and signaling, as well as in the development of both chronic and infectious diseases. Because of their ubiquity on cell surfaces, they are key components of biological interfaces and are involved in molecular recognition and signaling. They are also important molecules in cell adhesion and cell movement. Meanwhile, glycans on proteins inside cells participate in the cell’s responses to incoming signals, for example by helping to modulate gene expression and protein functions. Glycan polymers such as cellulose are important components of plant cell walls. Understanding how such walls are assembled and how they can be deconstructed is fundamental to basic plant biology, but also in the development of applications such as efficient conversion of biomass into fuels. Glycan polymers derived from plants and other organisms can also serve as sources of new materials with wide-ranging applications from tissue engineering scaffolds to flexible electronic displays. Achieving an understanding of the structures and functions of glycans is fundamental to understanding biology. The National Research Council report resulting from this project, Transforming Glycoscience: A Roadmap for the Future, discusses the impact glycoscience can have across health, energy, and materials science and lays out a roadmap of research goals whose achievement could help the field become a widely-recognized and integrated discipline rather than a niche area studied by a small number of specialists. Despite advances, gaps remain in the current suite of tools for investigating glycans and these tools often require expert users and facilities, presenting a barrier for many investigators. The field is poised to benefit from the pursuit of the framework laid out in the study, which incorporates not only human physiology and health but also plant, animal, and microbial research and efforts to improve tools for synthesis, analysis, data management, and other fundamental research infrastructure.

59 BASIC BIOLOGICAL SCIENCES↗

Hybrid Biological–Chemical Approach Offers Flexibility and Reduces the Carbon Footprint of Biobased Plastics, Rubbers, and Fuels

A critical challenge for the bioenergy research community has been producing drop-in hydrocarbon fuels and chemicals at yields sufficient to compete with their petroleum-derived counterparts. Biological production of highly reduced compounds poses fundamental challenges. Conversely, glucose, xylose, and sucrose can be fermented to ethanol at near-theoretical yields. Just as olefin crackers are often considered a gateway for petrochemical complexes that produce an array of downstream products, catalytic ethanol upgrading can potentially enable an entire biorefining complex able to produce renewable, low-carbon fuels and chemicals. By doping the Ta 2 O 5 /SiO 2 catalyst with different transition metals, we show herein that Ostromyslensky catalysts can be utilized for direct conversion of ethanol to varying ratios of 1,3-butadiene (1,3-BD), dietheylether (DEE), and ethylene. These results are integrated into the first comprehensive analysis of ethanol conversion to 1,3-BD, DEE, and ethylene that incorporates empirical data with chemical process modeling and life-cycle greenhouse gas (GHG) assessment. We find that the suite of products can replace conventional rubber, plastics, and diesel, achieving as much as a 150% reduction in GHG-intensity relative to fossil pathways (net carbon sequestration). Selecting the route with the greatest ethylene and DEE output can maximize total potential emission reductions.

09 BIOMASS FUELS↗

Crystal Structures of Phosphite Dehydrogenase Provide Insights into Nicotinamide Cofactor Regeneration

The enzyme phosphite dehydrogenase (PTDH) catalyzes the NAD{sup +}-dependent conversion of phosphite to phosphate and represents the first biological catalyst that has been shown to conduct the enzymatic oxidation of phosphorus. Despite investigation for more than a decade into both the mechanism of its unusual reaction and its utility in cofactor regeneration, there has been a lack of any structural data for PTDH. Here we present the cocrystal structure of an engineered thermostable variant of PTDH bound to NAD{sup +} (1.7 {angstrom} resolution), as well as four other cocrystal structures of thermostable PTDH and its variants with different ligands (all between 1.85 and 2.3 {angstrom} resolution). These structures provide a molecular framework for understanding prior mutational analysis and point to additional residues, located in the active site, that may contribute to the enzymatic activity of this highly unusual catalyst.

59 BASIC BIOLOGICAL SCIENCES↗

SU-E-T-30: A Factor for Converting Dose to a Gold Nanoparticle Mixture to a Biologically-Relevant Dose

Purpose: Monte Carlo studies of gold nanoparticle (GNP) dose enhancement on macroscopic scales in radiotherapy have modeled GNPs in tissue as a homogeneous mixture of gold and tissue. Using an explicit model of GNPs randomly positioned in a small volume (1 µm{sup 3}) of tissue, this study aims to quantify the dose to the biologically relevant component of a goldtissue mixture, enabling a conversion from macroscopically-scored dose. Methods: Using the PENELOPE Monte Carlo code with the penEasy package, we modeled a 1 µm{sup 3} volume containing either a tissue-gold mixture or GNPs suspended in ICRU 4-component tissue at various gold concentrations (0, 5, 10, and 15 mg Au/g tissue) and GNP diameters (20, 30, 40, 50 nm). The volume was irradiated with monoenergetic photon and electron beams, ranging from 110 eV to 6 MeV. Interaction forcing was utilized to increase simulation efficiency. Energy deposition was scored in the tissue for each case and was converted to dose. For each scenario, we calculated a conversion factor, the ratio of dose-to-tissue to dose-to-mixture as a function of energy. Results: The conversion factor was plotted as a function of energy for both photons and electrons. For electrons, the conversion factor was relatively unaffected by any of the parameters, including energy, ranging between 0.98–1.02. For photons, the factor was very energy dependent, with a range of 0.49–1.02. The factor was lowest for 10–100 keV photons. The conversion factor generally decreased with increasing GNP concentration and increasing GNP size. Conclusion: With a large variation in the conversion factor with incident energy, dose deposition is dependent on the spectrum incident on a volume. By scoring the energy spectrum in a given volume, one can provide a scenario-specific conversion factor, allowing fast, detailed Monte Carlo simulations without the need for explicit GNP-definition.

60 APPLIED LIFE SCIENCES↗

Stepping on the Gas to a Circular Economy: Accelerating Development of Carbon-Negative Chemical Production from Gas Fermentation

Owing to rising levels of greenhouse gases in our atmosphere and oceans, climate change poses significant environmental, economic, and social challenges globally. Technologies that enable carbon capture and conversion of greenhouse gases into useful products will help mitigate climate change by enabling a new circular carbon economy. Gas fermentation using carbon-fixing microorganisms offers an economically viable and scalable solution with unique feedstock and product flexibility that has been commercialized recently. Here, we review the state of the art of gas fermentation and discuss opportunities to accelerate future development and rollout. We discuss the current commercial process for conversion of waste gases to ethanol, including the underlying biology, challenges in process scale-up, and progress on genetic tool development and metabolic engineering to expand the product spectrum. We emphasize key enabling technologies to accelerate strain development for acetogens and other nonmodel organisms.

59 BASIC BIOLOGICAL SCIENCES↗

Probing Product Binding in Cellulase Enzymes [Fact Sheet]

Large-scale computer simulations offer a new interpretation for the discrepancy in experimentally measured product inhibition constants in cellulase enzymes. The simulations also suggest new strategies for relieving product inhibition, which is key for the application of enzymes in the biofuels industry. Bacteria and fungi secrete enzyme cocktails consisting of processive and nonprocessive enzymes, which act synergistically to digest plant cell walls. As high-solids loadings are important for economically viable biomass conversion processes, the concentrations of glucose and cellobiose reached during enzymatic hydrolysis often cause a significant slow-down in cellulase activity through enzyme inhibition. Many studies have quantified cellulase product inhibition, but experimental measurements of product binding constants vary dramatically, and there is little consensus on the importance of this phenomenon. To provide molecular insights into cellulase product binding, scientists from the National Renewable Energy Laboratory (NREL) used computer simulation to demonstrate that the presence of cellodextrins bound in the substrate sites of cellulases, which are present during enzymatic catalysis, can increase cellobiose binding to processive cellulases by several orders of magnitude, whereas this presence has no effect on product binding in nonprocessive cellulases. These findings provide new insights into the large discrepancies reported for binding constants for cellulases. This work also suggests that catalytic engagement has an important effect on apparent inhibition constants for processive cellulases and should be taken into account to characterize product inhibition. Additionally, several computationally designed mutants of the processive cellulases are demonstrated to be able to reduce the cellobiose binding affinity, which suggests a means to engineer cellulases to improve the efficiency of biomass conversion.

09 BIOMASS FUELS↗

Design of novel nano-carriers for multi-enzyme co-localization

The main objective of this project is to design novel nano-structured carriers and strategies to co-localize multiple enzymes to mimic the functionalities of MECs. In order to achieve this goal, distinct approaches for enzyme co-localization were developed and evaluated. Specifically, we investigated different polymeric nano-carriers, both flexible and rigid, as platforms for co-localization, as well as distinct enzyme attachment techniques using model enzyme systems using glucose oxidase and horseradish peroxidase to control the spatial arrangement of the multiple enzymes on the nanocarriers. This platform technology can be potentially used to co-localize various enzyme systems and its broad applicability will be tested using the sclareol biosynthesis process to control the formation of products through the formation of MECs with multiple enzymes NgCPS and sSsSS to regulate the pathway of reactive intermediate to enhance the final product conversion rate.

59 BASIC BIOLOGICAL SCIENCES↗

Method for the electro-addressable functionalization of electrode arrays

A method for preparing an electrochemical biosensor uses bias-assisted assembly of unreactive -onium molecules on an electrode array followed by post-assembly electro-addressable conversion of the unreactive group to a chemical or biological recognition group. Electro-addressable functionalization of electrode arrays enables the multi-target electrochemical sensing of biological and chemical analytes.

42 ENGINEERING↗