Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BASE PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Real-time rapid leakage estimation for deep space habitats using exponentially-weighted adaptively-refined search

The recent accelerated growth in space-related research and development activities makes the near-term need for long-term extraterrestrial habitats evident. Such habitats must operate under continuous disruptive conditions arising from extreme environments like meteoroid impacts, extreme temperature fluctuations, galactic cosmic rays, destructive dust, and seismic events. Loss of air or atmospheric leakage from a habitat poses safety challenges that demand proper attention. Such leakage may arise from micro-meteoroid impacts, crack growth, bolt/rivet loosening, and seal deterioration. In this paper, leakage estimation in deep space habitats is posed as an inverse problem. A forward pressure-based dynamical model is formulated for atmospheric leakage. Experiments are performed on a small-scaled pressure chamber where different leakage scenarios are emulated and corresponding pressure values are measured. An exponentially-weighted adaptively-refined search (EWARS) algorithm is developed and validated for the inverse problem of real-time leakage estimation. It is demonstrated that the proposed methodology can achieve real-time estimation and tracking of constant and variable leaks with accuracy.

Deep space habitats↗

Passive Rocket Diffuser Testing: Performance Similitude Via Nozzle Contour Modification

Subscale rocket testing offers a chance to examine exhaust plume behavior and prove out auxiliary systems early in a development cycle, when the cost of design iteration remains low. Despite the utility of experimentation, perfect similitude between a rocket engine and a scaled model is unobtainable; choices must be made to prioritize the reproduction of certain parameters at the expense of others. The experimentalist’s toolkit contains a variety of techniques to achieve this selective similarity. Determination of the appropriate tool is dependent on a test series’ specific objectives, facility limitations, and financial considerations. Preservation of full nozzle geometry is crucial if its internal flow is of interest. However, subscale thrusters often serve as a simple plume source in the evaluation of adjacent phenomena: vehicle base pressures, retropropulsive flows, supersonic diffuser performance, refractory erosion, deflector cooling, impingement shock structures, etc. In such cases, it may be permissible to rework the nozzle geometry to compensate for discrepancies in subscale propellant pressure, temperature, or chemical composition. Thrust, pressure, Mach number, heat flux, and myriad other parameters can be used to ground the altered designs. Subscale diffuser testing at the full chamber pressure of flight hardware is occasionally infeasible. It is hypothesized that, absent a means of backpressure reduction, comparable performance may be obtained for a prescribed motive fluid by maintaining scaled engine mass flow and nozzle exit geometry at the expense of throat geometry, exit pressure, and Mach number. The present work offers discrete empirical support for this mass-flow-based approach to contour modification.

subscale↗

Loading and Regeneration Analysis of a Diesel Particulate Filter with a Radio Frequency-Based Sensor

Accurate knowledge of diesel particulate filter (DPF) loading is critical for robust and efficient operation of the combined engine-exhaust aftertreatment system. Furthermore, upcoming on-board diagnostics regulations require on-board technologies to evaluate the status of the DPF. This work describes the application of radio frequency (RF) based sensing techniques to accurately measure DPF soot levels and the spatial distribution of the accumulated material. A 1.9L GM turbo diesel engine and a DPF with an RF-sensor were studied. Direct comparisons between the RF measurement and conventional pressure-based methods were made. Further analysis of the particulate matter loading rates was obtained with a mass-based soot emission measurement instrument (TEOM). Comparison with pressure drop measurements show the RF technique is unaffected by exhaust flow variations and exhibits a high degree of sensitivity to DPF soot loading and good dynamic response. Additional computational and experimental work further illustrates the spatial resolution of the RF measurements. Based on the experimental results, the RF technique shows significant promise for improving DPF control enabling optimization of the combined engine-aftertreatment system for improved fuel economy and extended DPF service life.

33 ADVANCED PROPULSION SYSTEMS↗

Probe shapes for streamwise momentum and cross-stream turbulence intensity

When the highly turbulent flowfields at the edges of jets, in augmentors, and in other jet-mixing devices are surveyed with conventional pitot probes, the values indicated by the instruments may contain a significant increment brought about by the dynamics of the eddies. Although the influence of turbulence on the measurements is usually negligible in streams where the turbulence level is 1 percent or less, the effect of turbulence on static and total pressure measurements can be around 20 percent when the turbulence level exceeds 40 percent. This paper describes a theoretical study that develops probe shapes that directly measure the time-averaged total pressure based on the streamwise component of the velocity vector to obtain a direct measurement of the streamwise momentum. The difference between the time-averaged pressure indicated by such a probe and one that measures the total head based on the entire velocity vector yields the cross-stream turbulence intensity.

Rossow, Vernon, J.↗

Detecting subsurface fluid leaks in real-time using injection and production rates

Here, CO 2 injection into geologic formations for either enhanced oil recovery or carbon storage introduces a risk for undesired fluid leakage into overlying groundwater or to the surface. Despite decades of subsurface CO 2 production and injection, the technologies and methods for detecting CO 2 leaks are still costly and prone to large uncertainties. This is especially true for pressure-based monitoring methods, which require the use of simplified geological and reservoir flow models to simulate the pressure behavior as well as background noise affecting pressure measurements.

42 ENGINEERING↗

Performance Modeling of Experimental Laser Lightcrafts

A computational plasma aerodynamics model is developed to study the performance of a laser propelled Lightcraft. The computational methodology is based on a time-accurate, three-dimensional, finite-difference, chemically reacting, unstructured grid, pressure-based formulation. The underlying physics are added and tested systematically using a building-block approach. The physics modeled include non-equilibrium thermodynamics, non-equilibrium air-plasma finite-rate kinetics, specular ray tracing, laser beam energy absorption and refraction by plasma, non-equilibrium plasma radiation, and plasma resonance. A series of transient computations are performed at several laser pulse energy levels and the simulated physics are discussed and compared with those of tests and literatures. The predicted coupling coefficients for the Lightcraft compared reasonably well with those of tests conducted on a pendulum apparatus.

Wang, Ten-See↗

Multiphysics Thermal-Fluid Design Analysis of a Non-Nuclear Tester for Hot-Hydrogen Materials and Component Development

The objective of this effort is to perform design analyses for a non-nuclear hot-hydrogen materials tester, as a first step towards developing efficient and accurate multiphysics, thermo-fluid computational methodology to predict environments for hypothetical solid-core, nuclear thermal engine thrust chamber design and analysis. The computational methodology is based on a multidimensional, finite-volume, turbulent, chemically reacting, thermally radiating, unstructured-grid, and pressure-based formulation. The multiphysics invoked in this study include hydrogen dissociation kinetics and thermodynamics, turbulent flow, convective, and thermal radiative heat transfers. The goals of the design analyses are to maintain maximum hot-hydrogen jet impingement energy and to minimize chamber wall heating. The results of analyses on three test fixture configurations and the rationale for final selection are presented. The interrogation of physics revealed that reactions of hydrogen dissociation and recombination are highly correlated with local temperature and are necessary for accurate prediction of the hot-hydrogen jet temperature.

Wang, Ten-See↗

Analysis of Material Sample Heated by Impinging Hot Hydrogen Jet in a Non-Nuclear Tester

A computational conjugate heat transfer methodology was developed and anchored with data obtained from a hot-hydrogen jet heated, non-nuclear materials tester, as a first step towards developing an efficient and accurate multiphysics, thermo-fluid computational methodology to predict environments for hypothetical solid-core, nuclear thermal engine thrust chamber. The computational methodology is based on a multidimensional, finite-volume, turbulent, chemically reacting, thermally radiating, unstructured-grid, and pressure-based formulation. The multiphysics invoked in this study include hydrogen dissociation kinetics and thermodynamics, turbulent flow, convective and thermal radiative, and conjugate heat transfers. Predicted hot hydrogen jet and material surface temperatures were compared with those of measurement. Predicted solid temperatures were compared with those obtained with a standard heat transfer code. The interrogation of physics revealed that reactions of hydrogen dissociation and recombination are highly correlated with local temperature and are necessary for accurate prediction of the hot-hydrogen jet temperature.

Wang, Ten-See↗

Numerical investigation of an internal layer in turbulent flow over a curved hill

A numerical investigation of incompressible and compressible turbulent flows over strongly curved surfaces is presented. The turbulent flow equations are solved by a pressure based Navier-Stokes equations solver. In the method, the conservation of mass equation is replaced by a pressure correction equation applicable for both compressible and incompressible flows. The turbulence is described by a multiple time scale turbulence model supplemented with a near-wall turbulence model. The numerical results show that the internal layer is a strong turbulence field which is developed beneath the external boundary layer and is located very close to the wall. The development of the internal layer is attributed to the enormous mean flow strain rate caused by the streamline curvature. The external boundary layer flow responds rather slowly to the streamline curvature. Thus, the turbulence field of the forward corner of the curved hill is characterized by two turbulence fields interacting with each other. The turbulence intensity of the internal layer is much stronger than that of the external boundary layer, so that the development of a new boundary layer in the downstream region of the curved hill depends mostly on the internal layer. These numerical results are in good agreement with the measured data, and show that the turbulence model can resolve the turbulence field subjected to the strong streamline curvature.

Kim, S.-W.↗

The elastic and thermoelectric properties of the Zintl compound Ca{sub 5}Al{sub 2}Sb{sub 6} under high pressure

The elastic and thermoelectric properties of Ca{sub 5}Al{sub 2}Sb{sub 6} under pressure are studied using ab initio calculation and semiclassical Boltzmann theory. The calculated elastic constants and minimum thermal conductivity indicate that Ca{sub 5}Al{sub 2}Sb{sub 6} exhibits an anisotropic structure and high thermoelectric performance. The size of the band gap shows a nonlinear change with increasing pressure. Based on the electronic structure, the calculated thermoelectric parameters show that the Seebeck coefficient has no obvious change under pressure, whereas the electrical conductivity improves with increasing pressure. Therefore, the power factor increases at an appropriate pressure of P = 2.6 GPa. P-type doping of Ca{sub 5}Al{sub 2}Sb{sub 6} may achieve better thermoelectric performance than n-type doping, in agreement with experiment. The anisotropic thermoelectric properties of Ca{sub 5}Al{sub 2}Sb{sub 6} indicate that the thermoelectric performance along the z-direction is superior to other directions. This is attributed to the combination of the large dispersion and high band degeneracy along the Γ-Z direction in the band structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Base Bleed and Terminal Fairings on the Performance of Exhaust-Nozzle-Afterbody Combinations at Mach Numbers of 1.93, 2.55, and 3.05

An investigation of four exhaust-nozzle-afterbody combinations has been conducted in the Langley 9- by 12-inch blowdown tunnel at Mach numbers of 1.93, 2.55, and 3.05. The models were tested on a pylon-mounted nacelle and the jet exhaust was simulated with cold air. Base bleed w a s varied from 0 to about 12 percent of the primary jet weight flow and was discharged in to the base region through either a sonic or supersonic bleed nozzle. The models were tested at zero degree angle of attack and the Reynolds number range was from 8 x 10(exp 6) to 9 x 10(exp 6) per foot. The results indicate that the base pressure and the performance of the exhaust-nozzle-afterbody combinations were little affected gy the high-velocity base bleed. The efficiency of the terminal-fairing model was only slightly less than that of the convergent-divergent nozzle-afterbody combinations; this difference indicates the loss associated with improved transonic efficiency at higher Mach numbers.

Norton, Harry T., Jr.↗

Space Launch System Base Aerodynamics Post-Flight Reconstruction for Artemis I

Artemis I was the first uncrewed integrated test flight of the NASA heavy-lift, human-rated, exploration-class launch vehicle, Space Launch System (SLS), and Orion spacecraft. Artemis I successfully launched from Pad39B at NASA Kennedy Space Center on November 16th, 2022. The integrated test flight was composed of launch and ascent of SLS vehicle from lift-off to RS-25 main engine cut-off (MECO), interim cryogenic propulsion stage (ICPS) in-space flight and Orion’s trajectory around the moon and landing in the Pacific Ocean which occurred on December 11th, 2022. The SLS total thrust of 8,800,000 lbf was powered by four LOX/LH2 RS-25 engines and two 5-segment solid rocket boosters. As a result, the base flow field had highly complex phenomena and regimes. SLS base aerodynamics covers vehicle base pressure and integrated axial force during powered flight from lift-off to MECO. This work discusses the SLS base flow physics observed during Artemis I and comparisons of post-flight reconstruction with pre-flight models and Space Shuttle data. This was the first time in-depth base aerodynamics flight reconstruction has been investigated for an exploration-class launch vehicle since the Saturn V Program.

aerothermodynamics↗

Base Aerodynamics Post-Flight Reconstruction for Artemis I

Artemis I was the first uncrewed integrated test flight of the NASA heavy-lift, human-rated, exploration-class launch vehicle, Space Launch System (SLS), and Orion spacecraft. Artemis I successfully launched from Pad39B at NASA Kennedy Space Center on November 16th, 2022. The integrated test flight was composed of launch and ascent of SLS vehicle from lift-off to RS-25 main engine cut-off (MECO), interim cryogenic propulsion stage (ICPS) in-space flight and Orion’s trajectory around the moon and landing in the Pacific Ocean which occurred on December 11th, 2022. The SLS total thrust of 8,800,000 lbf was powered by four LOX/LH2 RS-25 engines and two 5-segment solid rocket boosters. As a result, the base flow field had highly complex phenomena and regimes. SLS base aerodynamics covers vehicle base pressure and integrated axial force during powered flight from lift-off to MECO. This work discusses the SLS base flow physics observed during Artemis I and comparisons of post-flight reconstruction with pre-flight models and Space Shuttle data. This was the first time in-depth base aerodynamics flight reconstruction has been investigated for an exploration-class launch vehicle since the Saturn V Program.

aerothermodynamics↗

Tail Lobe Revisited: Magnetic Field Modeling Based on Plasma Data

Plasma data from the ISEE-1 and -2 spacecraft during 1977-1980 have been used to determine the distribution of data points in the magnetotail in the range of distances -20 < XGSM < --15, i.e. which of the records that were located in the current sheet, in the tail lobe, in the magnetosheath and in the boundary layers respectively. The ISEE-1 and -2 magnetic field data for the records in the tail lobe were then used to model the tail lobe magnetic field dependence on the solar wind dynamic pressure, on the Interplanetary Magnetic Field (IMF) and on the Dst index. The tail lobe magnetic field was assumed to be dependent on the square root of the dynamic pressure based on the balance between the total magnetic pressure in the tail lobes and the dynamic pressure of the solar wind. The IMF dependent terms, added to the pressure term, were sought in many different forms while the Dst dependence of the tail lobe magnetic field was assumed to be linear. The field shows a strong dependence on the square root of the dynamic pressure and the different IMF dependent terms all constitute a significant contribution to the total field. However, the dependence on the Dst index turned out to be very weak at those down-tail distances. The results of this study are intended to be used for parameterizing future versions of the data-based models of the global magnetospheric magnetic field.

Karlsson, S. B. P.↗

Flight-Determined Subsonic Lift and Drag Characteristics of Seven Lifting-Body and Wing-Body Reentry Vehicle Configurations With Truncated Bases

This paper examines flight-measured subsonic lift and drag characteristics of seven lifting-body and wing-body reentry vehicle configurations with truncated bases. The seven vehicles are the full-scale M2-F1, M2-F2, HL-10, X-24A, X-24B, and X-15 vehicles and the Space Shuttle prototype. Lift and drag data of the various vehicles are assembled under aerodynamic performance parameters and presented in several analytical and graphical formats. These formats unify the data and allow a greater understanding than studying the vehicles individually allows. Lift-curve slope data are studied with respect to aspect ratio and related to generic wind-tunnel model data and to theory for low-aspect-ratio planforms. The proper definition of reference area was critical for understanding and comparing the lift data. The drag components studied include minimum drag coefficient, lift-related drag, maximum lift-to-drag ratio, and, where available, base pressure coefficients. The effects of fineness ratio on forebody drag were also considered. The influence of forebody drag on afterbody (base) drag at low lift is shown to be related to Hoerner's compilation for body, airfoil, nacelle, and canopy drag. These analyses are intended to provide a useful analytical framework with which to compare and evaluate new vehicle configurations of the same generic family.

Saltzman, Edwin J.↗

Development, Verification and Validation of Parallel, Scalable Volume of Fluid CFD Program for Propulsion Applications

There are many instances involving liquid/gas interfaces and their dynamics in the design of liquid engine powered rockets such as the Space Launch System (SLS). Some examples of these applications are: Propellant tank draining and slosh, subcritical condition injector analysis for gas generators, preburners and thrust chambers, water deluge mitigation for launch induced environments and even solid rocket motor liquid slag dynamics. Commercially available CFD programs simulating gas/liquid interfaces using the Volume of Fluid approach are currently limited in their parallel scalability. In 2010 for instance, an internal NASA/MSFC review of three commercial tools revealed that parallel scalability was seriously compromised at 8 cpus and no additional speedup was possible after 32 cpus. Other non-interface CFD applications at the time were demonstrating useful parallel scalability up to 4,096 processors or more. Based on this review, NASA/MSFC initiated an effort to implement a Volume of Fluid implementation within the unstructured mesh, pressure-based algorithm CFD program, Loci-STREAM. After verification was achieved by comparing results to the commercial CFD program CFD-Ace+, and validation by direct comparison with data, Loci-STREAM-VoF is now the production CFD tool for propellant slosh force and slosh damping rate simulations at NASA/MSFC. On these applications, good parallel scalability has been demonstrated for problems sizes of tens of millions of cells and thousands of cpu cores. Ongoing efforts are focused on the application of Loci-STREAM-VoF to predict the transient flow patterns of water on the SLS Mobile Launch Platform in order to support the phasing of water for launch environment mitigation so that vehicle determinantal effects are not realized.

West, Jeff↗

Evaluating and modeling the effects of surface sampling factors on the recovery of organic chemical attribution signatures using the accelerated diffusion sampler and solvent extraction

In this study, an experimental design matrix was created and executed in order to test the effects of various real-world factors on the ability of the (1) accelerated diffusion sampler with solid phase micro-extraction (ADS-SPME) and (2) solvent extraction to capture organic chemical attribution signatures (CAS) from dimethyl methylphosphonate (DMMP) spiked onto painted wall board (PWB) surfaces. The DMMP CAS organic impurities sampled by ADS-SPME and solvent extraction were analyzed by gas chromatography/mass spectrometry (GC/MS). The number of detected DMMP CAS impurities and their respective GC/MS peak areas were determined as a function of DMMP stock, DMMP spiked volume, exposure time, SPME sampling time, and ADS headspace pressure. Based on the statistical analysis of experimental results, several general conclusions are made: (1) ADS-SPME with vacuum (i.e., reduced pressure) increased the amount of detected CAS impurity, as measured by GC/MS peak area, by a factor of 1.7 to 1.9 for PWB under certain experimental conditions, (2) the amount of detected CAS impurity was most influenced by spiked volume, stock, and ADS headspace pressure, (3) the ADS had no measurable effect on the number of detected DMMP impurities, that is, the ADS (with and without reduced pressure) had no practical effect on the DMMP impurity profile collected from spiked PWB, and (4) solvent extraction out performed ADS-SPME in terms of consistently capturing all or most of the targeted DMMP impurities from spiked PWB.

36 MATERIALS SCIENCE↗