Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “B”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

The significance of fractional crystallization in the petrogenesis of Apollo 17 Type A and B high-Ti basalts

Whole-rock and mineral analyses of 26 'new' type A and B Apollo 17 basalts are reported. The petrography and mineral chemistry of these basalts are similar to previously reported Apollo 17 basalts. However, these 'new' whole-rock data extend the compositional ranges of previously reported type A and B basalts and require the division of the type B basalts into type B1 and B2 varieties. These three types display similar trends when both major and trace elements are plotted against a fractionation index of Cr/La ratio. Major element compositions of basalts from all three types fall on olivine + Ti oxide control lines. This study demonstrates that Apollo 17 type A, B1, and B2 basalts have a relatively simple petrogenesis, with the only postmagma-generation process being fractional crystallization.

Neal, Clive R.↗

Gradiometry coexperiments to the gravity probe B and step missions

The Gravity Probe-B (GP-B) spacecraft, designed to test predictions of general relativity, will fly in the mid 1990s. It will carry four electrostatically suspended gyroscopes in a cryogenic environment and will have a drag-free control system to minimize disturbances on the gyroscopes. The Stanford Test of Equivalence Principle (STEP) spacecraft, to fly later, will carry a set of test masses under very similar conditions. The possibility of using differential measurements of the GP-B gyroscopes suspension forces and the STEP tests mass displacement readout to form single-axis gravity gradiometers is explored. It is shown that the noise in the suspension systems is sufficiently small in the relevant frequency range, and that enough information is collected to compensate for the spacecrafts' attitude motion. Finally, using Breakwell's flat-earth approximation, these experiments are compared to other geodesy experiments and predict the contribution they can make to the knowledge of the Earth's geopotential.

Tapley, M.↗

The influence of IMF B(y) on the high-latitude thermospheric circulation during northward IMF

This paper uses the Dynamics Explorer data set, together with a sufficient quantity of corresponding IMF data, to establish correlations among the observed relationships between the IMF B(y) and the high-latitude thermospheric circulation during periods of northward IMF. Statistical evidence is presented that illustrates a relationship between the respective magnitudes of the B(z) and B(y) components of the IMF and the occurrence of sunward winds in the polar cap. The ion-neutral coupling processes responsible for the observed effects are discussed together with the general implications of the results.

Mccormac, F. G.↗

High frequency, high temperature specific core loss and dynamic B-H hysteresis loop characteristics of soft magnetic alloys

Limited experimental data exists for the specific core loss and dynamic B-H loop for soft magnetic materials for the combined conditions of high frequency and high temperature. This experimental study investigates the specific core loss and dynamic B-H loop characteristics of Supermalloy and Metglas 2605SC over the frequency range of 1 to 50 kHz and temperature range of 23 to 300 C under sinusoidal voltage excitation. The experimental setup used to conduct the investigation is described. The effects of the maximum magnetic flux density, frequency, and temperature on the specific core loss and on the size and shape of the B-H loops are examined.

Wieserman, W. R.↗

The spatial characteristics of the B helical mode for a choked axisymmetric nozzle

An acoustic near-field study was performed for an axisymmetric conical nozzle operated at a fully expanded Mach number of 1.3. The acoustic measurements were performed in the nozzle exit plane using multiple sensors arranged around the periphery of the nozzle. The acquired data were simultaneously digitized. The acoustic spatial characteristics, describing the large scale structure associated with the preferred shear layer instability mode, were determined for the dominant B screech mode. The nozzle was fitted with a lip thickening device to determine the effect of this geometric variable on the spatial structure of the jet. For the thin-lipped configuration, the flapping structure of the B screech mode was found to precess in a time-dependent manner about the jet axis. An increasing of the nozzle exit lip thickness altered the spatial characteristics of this mode from a flapping to a time-dependent flapping or spinning. Using the auto-bicoherence spectrum, frequency dependencies were found to exist in the acoustic data of the thick-lipped configuration. These dependencies may be related to the nonlinearity of the jet and/or the time-dependent nature of the B mode spatial structure.

Ponton, Michael K.↗

On-board processing architectures for satellite B-ISDN services

Onboard baseband processing architectures for future satellite broadband integrated services digital networks (B-ISDN's) are addressed. To assess the feasibility of implementing satellite B-ISDN services, critical design issues, such as B-ISDN traffic characteristics, transmission link design, and a trade-off between onboard circuit and fast packet switching, are analyzed. Examples of the two types of switching mechanisms and potential onboard network control functions are presented. A sample network architecture is also included to illustrate a potential onboard processing system.

Inukai, Thomas↗

A spectroscopic survey of B supergiants in the Large Magellanic Cloud

The results of a low-dispersion digital optical spectral survey of about 100 B-type supergiants in the Large Magellanic Cloud are presented. The MK spectral classification framework for B supergiants has been transferred to the metal-weak LMC stars, and recommended classification standards have been designated. Variations among the metal line strengths are examined. The most extreme variations are found for the nitrogen lines, for which a range of a factor of 3 or more may be seen in the equivalent widths within some spectral subclasses. It is suggested that these variations indicate a range of nitrogen surface abundances among the B supergiants, resulting from contamination of some of the stellar surfaces by processed material from the original H-burning core.

Fitzpatrick, Edward L.↗

Screening programme to select a resin for Gravity Probe-B composites

The Gravity Probe-B (GP-B) program undertook a screening program to select a possible replacement resin for the E-787 resin currently used in composite neck tubes and support struts. The goal was to find a resin with good cryogenic and structural properties, low-helium permeation and an easily repeatable fabrication process. Cycom 92, SCI REZ 081 and RS-3 were selected for comparison with E-787. Identical composite tubes made from each resin and gamma-alumina fiber (85 percent Al2O3, 15 percent SiO2) were evaluated for cryogenic and structural performance and for processability. Cryogenic performance was evaluated by measuring low-temperature permeation and leaks to determine cryogenic strain behavior. Structural performance was evaluated by comparing the resin-dominated shear strength of the composites. Processability was evaluated from fabrication comments and GP-B's own experience. SCI REZ 081 was selected as the best overall resin with superior strength and cryogenic performance and consistent processability.

Will, E. T.↗

Lip leakage flow simulation for the Gravity Probe B gas spinup

The lip leakage flow for the Gravity Probe B (GP-B) gas spinup system is investigated using a particle simulation code on the Connection Machine (PSiCM). Particle simulation is employed because the flow conditions are in the transition regime between continuum and free molecule where particle methods are of greatest use. The dominant flow is Couette in nature and the simulation is first validated through comparison to theoretical results for Couette flow in the transition regime. A GP-B type geometry is then simulated and results are presented for two conditions, those corresponding to near the inlet and near the outlet of the spinup channel. Comparison to experiment is not made because experimental data is not yet available.

Dagum, Leonardo↗

30 Dor B - A supernova remnant in a star formation region

The supernova remnant 30 Dor B is embedded in an H II region around the OB association LH 99, and has been suggested to be a Crab-type remnant. To determine the spatial extent and kinematic properties of this supernova remnant, long-slit echelle observations were obtained in the H-alpha and forbidden N II lines, along with imaging Fabry-Perot observations in the H-alpha line. It is found that 30 Dor B is partially obscured by a dark cloud with which the supernova remnant also interacts. The size of 30 Dor B is much larger than previously thought, making it much older than the Crab Nebula. If the progenitor of the supernova was formed coevally with LH 99, then it would have been more massive than the O3 members of the OB association.

Chu, You-Hua↗

Polarization and the envelopes of B(e) supergiants in the Magellanic Clouds

We report optical linear polarization observations of nine B(e) supergiants in the Magellanic Clouds. Several of them have large intrinsic polarizations. The data are consistent with nonspherically symmetric envelopes, around the B(e) stars, that possess a range of intrinsic polarizations. Comparison of the polarimetric data with the viewing aspect, inferred from the spectroscopy of the individual objects, agrees with this interpretation. The polarization correlates best with the infrared excess due to dust, suggesting the latter as the cause of most of the polarization. We cannot find, using the available data, a statistically significant difference between the polarization distributions of Galactic and Magellanic B(e) stars. Comparison of our data with previous polarimetric data, recovered from the literature for four stars, seems to indicate that the envelopes are stable.

Magalhaes, A. M.↗

Comparison of high frequency, high temperature core loss and B-H loop characteristics of an 80 Ni-Fe crystalline alloy and two iron-based amorphous alloys

Limited experimental data exists for the specific core loss and dynamic B-H loops for soft magnetic materials for the combined conditions of high frequency and high temperature. This experimental study investigates the specific core loss and dynamic B-H characteristics of a nickel-iron crystalline magnetic alloy (Supermalloy) and two iron-based amorphous magnetic materials (Metglas 2605S-3A and Metglas 2605SC) over the frequency range of 1-50 kHz and temperature range of 23-300 C under sinusoidal voltage excitation. The effects of maximum magnetic flux density, frequency, and temperature on the specific core loss and on the size and shape of the B-H loops are examined. The Supermalloy and Metglass 2605S-3A and 2605SC data are used to compare the core loss of transformers with identical kVA and voltage ratings.

Wieserman, William R.↗

Enhanced Cultivation Of Stimulated Murine B Cells

Method of in vitro cultivation of large numbers of stimulated murine B lymphocytes. Cells electrofused with other cells to produce hybridomas and monoclonal antibodies. Offers several advantages: polyclonally stimulated B-cell blasts cultivated for as long as 14 days, hybridomas created throughout culture period, yield of hybridomas increases during cultivation, and possible to expand polyclonally in vitro number of B cells specific for antigenic determinants first recognized in vivo.

Sammons, David W.↗

Model atmosphere analysis of selected luminous B stars

The general scientific goal of this program has been to determine whether the atmospheric structure of the B-type stars can be represented by the current generation of plane parallel, line-blanketed, LTE stellar atmosphere models sufficiently well to allow accurate effective temperatures and surface gravities to be deduced. The B stars cover a wide range of temperature and luminosity. For the hottest such stars (with T approximately 30,000 K) the applicability of the models may be compromised by departures from LTE in the stellar atmospheres ('non-LTE effects'). At the highest luminosities (the B 'super giants'), the models may be invalidated by departures from plane parallel geometry. Thus we seek to identify the temperature and luminosity range within which these effects are unimportant and where the models may be relied upon.

Fitzpatrick, Edward L.↗

B-70 Aircraft Study

This Phase 2 final report for the B-70 aircraft study contains the data location matrix, which provides a summary of the major cost, schedule, and technical items provided in the report; work breakdown structure; cost definitions; and B-70 program level summary data. The Phase 2 objective was to provide the B-70 aircraft data in accordance with the approved study plan. Several minor modifications to the original plan have been made as the result of the Phase 2 effort.

Johnson, V. T.↗

B-70 Aircraft Study

Volume 2 of the final report on the B-70 aircraft study is presented here. The B-70 Program, at the onset, was a full weapon system capable of sustained Mach 3 flight for the major portion of its design missions. The weapon system was to enter the SAC inventory as an RS-70 with the first intercontinental resonnaissance/bomber wing scheduled to go operational in July, 1964. After several redirections, a two XB-70 air vehicle program emerged with its prime objective being to demonstrate the technical feasibility of sustained Mach 3 flight. This section describes the original Weapon System 110A concepts, the evolution of the RS-70 design, and the XB-70 air vehicles which demonstrated the design, fabrication, and technical feasibility of long range Mach 3 flights at high altitude. The data presented shows that a very large step forward in the state-of-the-art of manned aircraft design was achieved during the B-70 development program and that advances were made and incorporated in every area, including design, materials application, and manufacturing techniques.

Source record↗

Li-6/Li-7, B-10/B-11, and Li-7/B-11/Si-28 individual IDPs

At the initial stage of the development of our solar system, the solar nebula is presumably composed of H-1, H-2, He-3, He-4, and Li-7, which were made during the Big Band, and C, N, O, . . ., which are products of nearby supernova explosions. Li-6 nuclei (together with about equal amounts of Li-7), Be-9, B-10, and B-11 were produced later by cosmic ray particles bombarding the local interstellar C, N, O, . . . nuclei before the nebula condensed to become the Sun and the planets. Thus, the ratio Li-6/Li-7 is a measure of the length of the early epoch of the solar system. In this paper we shall report the measurement of Li-7/Li-6, B-11/B-10, and Li-7/B-11/Si-28 of four IDP's obtained from Johnson Space Center and discuss the findings.

Xu, Y.-L.↗

High-efficiency, deep-junction, epitaxial InP solar cells on (100) and (111)B InP substrates

We report on the development and performance of deep-junction (approximately 0.25 micron), graded-emitter-doped, n(sup +)-p InP solar cells grown by metallorganic chemical vapor deposition (MOCVD). A novel, diffusion-transport process for obtaining lightly-doped p-type base regions of the solar cell is described. The I-V data and external quantum-efficiency response of these cells are presented. The best active-area AMO efficiency for these deep-junction cells on (100)-oriented InP substrates is 16.8 percent, with a J(sub SC) of 31.8 mA/sq cm, a V(sub OC) of 0.843 V, and a fill-factor of 0.85. By comparison, the best cell efficiency on the (111)B-oriented InP substrates was 15.0 percent. These efficiency values for deep-junction cells are encouraging and compare favorably with performance of thin-emitter (0.03 micron) epitaxial cells as well as that of deep-emitter diffused cells. The cell performance and breakdown voltage characteristics of a batch of 20 cells on each of the orientations are presented, indicating the superior breakdown voltage properties and other characteristics of InP cells on the (111)B orientation. Spectral response, dark I-V data, and photoluminescence (PL) measurements on the InP cells are presented with an analysis on the variation in J(sub SC) and V(sub OC) of the cells. It is observed, under open-circuit conditions, that lower-V(sub OC) cells exhibit higher band-edge PL intensity for both the (100) and (111)B orientations. This anomalous behavior suggests that radiative recombination in the heavily-doped n(sup +)-InP emitter may be detrimental to achieving higher V(sub OC) in n(sup +)-p InP solar cells.

Venkatasubramanian, R.↗