Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATTITUDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Engineering parameter determination from the radio astronomy explorer /RAE I/ satellite attitude data

An RAE-I satellite description is given, taking into account a dynamics experiment and the attitude sensing system. A computer program for analyzing flexible spacecraft attitude motions is considered, giving attention to the geometry of rod deformation. The characteristics of observed attitude data are discussed along with an analysis of the main boom root angle, the bending rigidity, and the damper plane angle.

Lawlor, E. A.↗

Mariner Mars 1971 attitude control subsystem

The Mariner Mars 1971 attitude control subsystem (ACS) is discussed. It is comprised of a sun sensor set, a Canopus tracker, an inertial reference unit, two cold gas reaction control assemblies, two rocket engine gimbal actuators, and an attitude control electronics unit. The subsystem has the following eight operating modes: (1) launch, (2) sun acquisition, (3) roll search, (4) celestial cruise, (5) all-axes inertial, (6) roll inertial, (7) commanded turn, and (8) thrust vector control. In the celestial cruise mode, the position control is held to plus or minus 0.25 deg. Commanded turn rates are plus or minus 0.18 deg/s. The attitude control logic in conjunction with command inputs from other spacecraft subsystems establishes the ACS operating mode. The logic utilizes Sun and Canopus acquisition signals generated within the ACS to perform automatic mode switching so that dependence of ground control is minimized when operating in the sun acquisition, roll search, and celestial cruise modes. The total ACS weight is 65.7 lb, and includes 5.4 lb of nitrogen gas. Total power requirements vary from 9 W for the celestial cruise mode to 54 W for the commanded turn mode.

Edmunds, R. S.↗

Spacecraft attitude control for a solar electric geosynchronous transfer mission

A study of the Attitude Control System (ACS) is made for a solar electric propulsion geosynchronous transfer mission. The basic mission considered is spacecraft injection into a low altitude, inclined orbit followed by low thrust orbit changing to achieve geosynchronous orbit. Because of the extended thrusting time, the mission performance is a strong function of the attitude control system. Two attitude control system design options for an example mission evolve from consideration of the spacecraft configuration, the environmental disturbances, and the probable ACS modes of operation. The impact of these design options on other spacecraft subsystems is discussed. The factors which must be considered in determining the ACS actuation and sensing subsystems are discussed. The effects of the actuation and sensing subsystems on the mission performance are also considered.

Leroy, B. E.↗

Attitude Control Propulsion Components, Volume 1

Effort was made to include as much engineering information on each component as possible, consistent with usefulness and catalog size limitations. The contents of this catalog contain components which were qualified for use with spacecraft monopropellant hydrazine and inert gas attitude control systems. Thrust ranges up to 44.5 N (10.0 lbf) for hydrazine and inert gas sytems were considered. Additionally, some components qualified for uses other than spacecraft attitude control are included because they are suitable for use in attitude controls systems.

Source record↗

Attitude estimation of earth orbiting satellites by decomposed linear recursive filters

Attitude estimation of earth orbiting satellites (including Large Space Telescope) subjected to environmental disturbances and noises was investigated. Modern control and estimation theory is used as a tool to design an efficient estimator for attitude estimation. Decomposed linear recursive filters for both continuous-time systems and discrete-time systems are derived. By using this accurate estimation of the attitude of spacecrafts, state variable feedback controller may be designed to achieve (or satisfy) high requirements of system performance.

Kou, S. R.↗

Three-axis attitude control for solar-powered electric propulsion spacecraft

Spacecraft utilizing solar electric propulsion (SEP) for certain long-term interplanetary missions will depend on large, flexible solar arrays. The resulting spacecraft configurations present some complex flight control problems. Questions regarding a general design approach are discussed along with options for three-axis control forces, tradeoffs for three-axis control forces, controllers for SEP attitude control, sensors for SEP attitude control, aspects of nonrigid vehicle interaction with attitude control, thrust vector control SEP dynamics, and mass expulsion control SEP dynamics. It is found that the state-of-the-art of control system design is mature enough to support an SEP project.

Bouvier, H. K.↗

Spacecraft attitude control for a solar electric geosynchronous transfer mission

A study of the Attitude Control System (ACS) is made for a solar electric propulsion geosynchronous transfer mission. The basic mission considered is spacecraft injection into a low altitude, inclined orbit followed by low thrust orbit changing to achieve geosynchronous orbit. Because of the extended thrusting time, the mission performance is a strong function of the attitude control system. Two attitude control system design options for an example mission evolve from consideration of the spacecraft configuration, the environmental disturbances, and the probable ACS modes of operation. The impact of these design options on other spacecraft subsystems is discussed. The paper presents a discussion of the factors which must be considered in determining the ACS actuation and sensing subsystems. The effects of the actuation and sensing subsystems on the mission performance are also considered.

Leroy, B. E.↗

A study of attitude control concepts for precision-pointing non-rigid spacecraft

Attitude control concepts for use onboard structurally nonrigid spacecraft that must be pointed with great precision are examined. The task of determining the eigenproperties of a system of linear time-invariant equations (in terms of hybrid coordinates) representing the attitude motion of a flexible spacecraft is discussed. Literal characteristics are developed for the associated eigenvalues and eigenvectors of the system. A method is presented for determining the poles and zeros of the transfer function describing the attitude dynamics of a flexible spacecraft characterized by hybrid coordinate equations. Alterations are made to linear regulator and observer theory to accommodate modeling errors. The results show that a model error vector, which evolves from an error system, can be added to a reduced system model, estimated by an observer, and used by the control law to render the system less sensitive to uncertain magnitudes and phase relations of truncated modes and external disturbance effects. A hybrid coordinate formulation using the provided assumed mode shapes, rather than incorporating the usual finite element approach is provided.

Likins, P. W.↗

Return-to-launch-site three degree of freedom analysis, constant inertial attitude during the fuel dissipation phase

Results are presented of a study to show the effect of selecting a constant inertial attitude during the fuel dissipation phase of a return-to-launch-site abort. Results are also presented which show that the selection of the constant inertial attitude will affect the arrival point on the range-velocity target line. An alternate selection of the inertial attitude will provide control over the trajectory shape.

Bown, R. L.↗

Attitude capture procedures for GEOS-C

The Geodynamics Experimental Ocean Satellite utilizes an extendable 6-meter gravity-gradient boom, a momentum flywheel, and an eddy current damper to achieve requisite stability. Because 1/e libration damping time constants were expected to be in excess of 1 week after boom extension, dynamic studies were undertaken to reduce the 30 to 40 days required to satisfy attitude constraints and begin experimental operations. A three-phase series of maneuvers requiring real-time attitude determination and precise timing resulted from these studies. These maneuvers were successfully executed and achieved three-axis attitude stabilization in 75 hours with librations of 3.6 degrees in pitch and less than 1.5 degrees in roll and yaw.

Lerner, G. M.↗

Geometrical procedures for the analysis of spacecraft attitude and bias determinability

Geometrical procedures are presented for predicting the determinability of spacecraft attitude and bias parameters. An analysis is presented on three common attitude measurements: sun angle, nadir angle, and sun-to-earth mid-scan rotation angle. First, the geometry of these measurements is considered for an arbitrary fixed location of the spacecraft; then the effect of orbital motion is analyzed. The results are summarized in a set of simple geometrical rules. The application of these rules to the Synchronous Meteorological Satellite-2 (SMS-2) is discussed. As a result of this geometrical analysis, modifications were made to the SMS-2 bias determination schedule which substantially enhanced the determinability of attitude sensor biases.

Wertz, J. R.↗

Skylab attitude control system

The attitude stabilization and control system for Skylab evolved from an analog controller into a fully digital processing system. Features of this system include a software-determined attitude reference to provide general maneuvering ability, an in-orbit programming capability, the use of large control moment gyros for attitude control, and the use of vehicle maneuvers to desaturate gyro momentum. The objectives, requirements, and implementations of the control system software are described, along with the rationales for certain design decisions and discussion of some system dynamics and actual performance.

Coon, T. R.↗

Attitude control system

An attitude control system is described in which angular rate signals are generated by rate gyros mounted closely adjacent to gimbaled engines at the rear of a vehicle. Error signals representative of a commanded change in vehicle angle or attitude are obtained from a precision inertial platform located in the nose region of the vehicle. The rate gyro derived signals dominate at high frequencies where dynamic effects become significant, and platform signals dominate at low frequencies where precision signals are required for a steady vehicle attitude. The blended signals are applied in a conventional manner to control the gimbaling of vehicle engines about control axes.

Vonpragenau, G. L.↗

Panoramic attitude sensor

Each subassembly, design analysis, and final calibration data on all assemblies for the Panormic Attitude Sensor (PAS) are described. The PAS is used for course attitude determination on the International Ultraviolet Explorer Spacecraft (IUE). The PAS contains a sun sensor which is sensitive only to the sun's radiation and a mechanically scanned sensor which is sensitive to the earth, moon, and the sun. The signals from these two sensors are encoded and sent back in the telemetry data stream to determine the spacecraft attitude.

Meek, I. C.↗

Attitude control of Mariner Jupiter-Saturn spacecraft

A major challenge of the Mariner Jupiter-Saturn '77 spacecraft was devising a suboptimal attitude controller that could meet the demanding mission requirements. The challenge was met by implementing a discrete stochastic controller for a specially designed onboard computer. The paper describes the design and operation of the controller, based on a simple model of spacecraft dynamics. Two types of cruising modes are considered: inertial cruise, where spacecraft attitude is determined from gyro position outputs, and celestial cruise, where position information is obtained from sun sensors and a star tracker. These two cruise modes under conditions of disturbances were simulated on computer, and the results showed that the controller maintained the spacecraft attitude with low rates. An appendix gives details on the single-step predictor.

Bahrami, K. A.↗

Three-axis attitude control for a geostationary satellite

The Applications Technology Satellite-6 was successfully launched into a geostationary orbit in May, 1974. Since that time, its attitude control subsystem has routinely demonstrated its ability to perform precision pointing and precision closed loop maneuvers. This paper describes the ATS-6 attitude control subsystem. The requirements imposed by the spacecraft mission objectives are outlined, and functional descriptions of the principal attitude control subsystem components and control laws are presented. The paper concludes with a summary comparison of in-orbit performance relative to its specified performance requirements.

Freeman, H. R.↗

Aircraft attitude measurement using a vector magnetometer

The feasibility of a vector magnetometer system was investigated by developing a technique to determine attitude given magnetic field components. Sample calculations are then made using the earth's magnetic field data acquired during actual flight conditions. Results of these calculations are compared graphically with measured attitude data acquired simultaneously with the magnetic data. The role and possible implementation of various reference angles are discussed along with other pertinent considerations. Finally, it is concluded that the earth's magnetic field as measured by modern vector magnetometers can play a significant role in attitude control systems.

Peitila, R.↗

On the attitude motion of an orbiting rigid body under the influence of gravity gradient torque

An investigation is made of the rotational motion of a rigid body orbiting the earth, under the influence of the geogravity-gradient torque. The attitude dynamics are formulated as perturbations from a nominal case. The perturbed equations are solved asymptotically, by the multiple scales technique. The independent variable, time, is extended into a space of higher dimension by means of new scales, fast, slow, etc. Integration of the equations is carried out separately in the new variables. The rapid and slow aspects of the attitude dynamics are systematically separated, resulting in a more efficient computer implementation and enhanced physical insight. The theory is applied to predict the attitude dynamics of an asymmetric rigid body satellite. A comparison is made of the maximum errors as the step size increases as predicted by the multiple scales solution and direct numerical integration. An improvement in computational speed of an order of magnitude is demonstrated.

Tao, Y. C.↗