SEARCH · Engineering Papers
Results for “ASSESSMENT”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Compatibility Assessment of Fuel System Elastomers with Bio-oil and Diesel Fuel
Bio-oil derived via fast pyrolysis is being developed as a renewable fuel option for petroleum distillates. The compatibility of neat bio-oil with six elastomer types was evaluated against the elastomer performance in neat diesel fuel, which served as the baseline. The elastomers included two fluorocarbons, six acrylonitrile butadiene rubbers (NBRs), and one type each of fluorosilicone, silicone, styrene butadiene rubber (SBR), polyurethane, and neoprene. Specimens of each material were exposed to the liquid and gaseous phases of the test fuels for 4 weeks at 60 degrees C, and properties in the wetted and dried states were measured. Exposure to bio-oil produced significant volume expansion in the fluorocarbons, NBRs, and fluorosilicone; however, excessive swelling (over 80%) was only observed for the two fluorocarbons and two NBR grades. The polyurethane specimens were completely degraded by the bio-oil. In contrast, both silicone and SBR exhibited lower swelling levels in bio-oil compared to neat diesel fuel. The implication is that, while polyurethane and fluorocarbon may not be acceptable seal materials for bio-oils, silicone may offer a lower cost alternative.
Assessing the Long-Term Stability of Anion Exchange Membranes for Electrochemical CO 2 Reduction
Materials and cell components used in CO 2 electrolysis have largely been adapted from technologies initially developed for water electrolysis and fuel cells. However, electrochemical CO 2 reduction introduces distinct material challenges due to the unique chemical environment in this process. Here, in this study, we conducted ex-situ 1000 h stability tests on commonly used anion exchange membranes, exposing them exclusively to electrolytes and organic molecules used or produced during CO 2 electrolysis, at concentrations relevant to and compatible with postseparation processes. Notably, 15% w/w n-propanol and 5 M acetic acid caused complete dissolution or partial disintegration of the membranes unless cross-linking was present and remained stable throughout the test. When the membranes stayed physically intact, most of them exhibited excellent chemical stability in alkaline medium containing alcohols or formic acid, which was confirmed by vibrational spectroscopy and ion exchange capacity measurements. However, exposure to alcohol-and acid-containing solutions led to a substantial increase in swelling and water uptake, with potential implications for mechanical stability, ion/product crossover, and compression management of adjacent components. The potential effects of CO 2 electroreduction products on membrane stability, their subsequent impact on electrolyzer performance, and mitigation strategies are discussed.
Life Cycle Assessment of a Parabolic Trough Concentrating Solar Power Plant and the Impacts of Key Design Alternatives
Explore the source record for details and available documents.
Comprehensive Environmental Assessment: A Meta-Assessment Approach
Not Available
Assessing microbial community patterns under incipient soil formation from basalt
Microbial dynamics drive the biotic machinery of early soil evolution. However, integrated knowledge of microbial community establishment, functional associations, and community assembly processes in incipient soil is lacking. This study presents a novel approach of combining microbial phylogenetic profiling, functional predictions, and community assembly processes to analyze drivers of microbial community establishment in an emerging soil system. Rigorous sub-meter sampling of a basalt-soil lysimeter after two years of irrigation revealed the contrasting depth-dependent distribution patterns of soil parameters and community diversity. Phylogenetic analysis of 16S rRNA gene indicated the presence of diverse bacterial and archaeal phyla, with high relative abundance of Actinobacteria on the surface and a consistently high abundance of Proteobacteria at all depths. Predicted functional gene analysis suggested dominant autotrophy signatures, evidence of an incomplete nitrogen cycle, and predicted enzymes of iron (III) to iron (II) conversion followed by intracellular uptake, transport, and regulation. Null modeling revealed microbial community assembly predominantly governed by variable selection. The relative influence of the variable selection decreased with depth, indicating unique and relatively harsh environmental conditions near the surface and more benign conditions with depth. Additionally, high levels of dispersal influenced community composition near the center of the domain, suggesting that spatial processes interact with deterministic selection imposed by the environment. Characterizing the complexity in incipient soils can advance research insights about microbial community diversity and assembly in other incipient systems (e.g., transformation of marginal soils, or soils recovering from disturbances such as fire, erosion, intensive agricultural practices, or contamination).
Assessment of electronic structure methods for the determination of the ground spin states of Fe( ii ), Fe( iii ) and Fe( iv ) complexes
Our ability to understand and simulate the reactions catalyzed by iron depends strongly on our ability to predict the relative energetics of spin states. In this work, we studied the electronic structures of Fe 2+ ion, gaseous FeO and 14 iron complexes using Kohn–Sham density functional theory with particular focus on determining the ground spin state of these species as well as the magnitudes of relevant spin-state energy splittings. The 14 iron complexes investigated in this work have hexacoordinate geometries of which seven are Fe(II), five are Fe(III) and two are Fe(IV) complexes. These are calculated using 20 exchange–correlation functionals. In particular, we use a local spin density approximation (LSDA) – GVWN5, four generalized gradient approximations (GGAs) – BLYP, PBE, OPBE and OLYP, two non-separable gradient approximations (NGAs) – GAM and N12, two meta-GGAs – M06-L and M11-L, a meta-NGA – MN15-L, five hybrid GGAs – B3LYP, B3LYP*, PBE0, B97-3 and SOGGA11-X, four hybrid meta-GGAs – M06, PW6B95, MPW1B95 and M08-SO and a hybrid meta-NGA – MN15. The density functional results are compared to reference data, which include experimental results as well as the results of diffusion Monte Carlo (DMC) calculations and ligand field theory estimates from the literature. For the Fe 2+ ion, all functionals except M11-L correctly predict the ground spin state to be quintet. However, quantitatively, most of the functionals are not close to the experimentally determined spin-state splitting energies. For FeO all functionals predict quintet to be the ground spin state. For the 14 iron complexes, the hybrid functionals B3LYP, MPW1B95 and MN15 correctly predict the ground spin state of 13 out of 14 complexes and PW6B95 gets all the 14 complexes right. Here, the local functionals, OPBE, OLYP and M06-L, predict the correct ground spin state for 12 out of 14 complexes. Two of the tested functionals are not recommended to be used for this type of study, in particular M08-SO and M11-L, because M08-SO systematically overstabilizes the high spin state, and M11-L systematically overstabilizes the low spin state.
Actinyl-cation interactions: experimental and theoretical assessment of [Np(vi)O 2 Cl 4 ] 2– and [U(vi)O 2 Cl 4 ] 2– systems
The interaction of the actinyl (AnO 2 2+ ) oxo group with low-valent cations influences the chemical and physical properties of hexavalent actinides, but the impact of these intermolecular interactions on the actinyl bond and their occurrence in solution and solid state phases remain unclear. In this study, we explore the coordination of alkali cations (Li + , Na + , K + ) with the [NpO 2 Cl 4 ] 2– coordination complexes using single-crystal X-ray diffraction, Raman spectroscopy, and density functional theory (DFT) calculations and compare to the related uranyl system. Three solid-state coordination compounds ([Li(12-crown-4)] 2 [NpO 2 Cl 4 ] (LiNp), [Na(18-crown-6)H 2 O] 2 [NpO 2 Cl 4 ] (NaNp), and [K(18-crown- 6 )] 2 [NpO 2 Cl 4 ] (KNp) have been synthesized and characterized using single-crystal X-ray diffraction and Raman spectroscopy. Only Li + cations interact with the neptunyl oxo in the solid-state compounds and this results in a red-shift of the NpO 2 2+ symmetric stretch (ν 1 ). Raman spectra of Np(VI) solutions containing lower Li + concentrations display a single peak at ~854 cm –1 and increasing the amount of Li + results in the ingrowth of a second band at 807 cm –1 . DFT calculations and vibrational analysis indicate the lower frequency vibrational band is the result of interactions between the Li + cation and the neptunyl oxo. Here, comparison to the related uranyl system shows similar interactions occur in the solid state, but subtle differences in the actinyl-cation modes in solution phase.
Assessing the viability of K-Mo2C for reverse water-gas shift scale-up: molecular to laboratory to pilot scale
Explore the source record for details and available documents.
Assessing the value of electric vehicle managed charging: a review of methodologies and results
Electric vehicle managed charging can benefit all consumers by supporting grid planning, operation, and reliability – especially complementing high-renewable systems.
Empirical assessment of the detection efficiency of CR-39 at high proton fluence and a compact, proton detector for high-fluence applications
CR-39 solid-state nuclear track detectors are widely used in physics and in many inertial confinement fusion (ICF) experiments, and under ideal conditions these detectors have 100% detection efficiency for ∼0.5–8 MeV protons. When the fluence of incident particles becomes too high, overlap of particle tracks leads to under-counting at typical processing conditions (5 h etch in 6N NaOH at 80 °C). Short etch times required to avoid overlap can cause under-counting as well, as tracks are not fully developed. Experiments have determined the minimum etch times for 100% detection of 1.7–4.3-MeV protons and established that for 2.4-MeV protons, relevant for detection of DD protons, the maximum fluence that can be detected using normal processing techniques is ≲3 × 10{sup 6} cm{sup −2}. A CR-39-based proton detector has been developed to mitigate issues related to high particle fluences on ICF facilities. Using a pinhole and scattering foil several mm in front of the CR-39, proton fluences at the CR-39 are reduced by more than a factor of ∼50, increasing the operating yield upper limit by a comparable amount.
First principles assessment of helium trapping in Y{sub 2}TiO{sub 5} in nano-featured ferritic alloys
Nano-scale Y{sub 2}Ti{sub 2}O{sub 7} and Y{sub 2}TiO{sub 5} oxides are the major features that provide high strength and irradiation tolerance in nano-structured ferritic alloys. Here, we employ density functional theory to study helium trapping in Y{sub 2}TiO{sub 5}. The results suggest that helium is more deeply trapped in Y{sub 2}TiO{sub 5} compared to Y{sub 2}Ti{sub 2}O{sub 7}. Helium occupies open channels in Y{sub 2}TiO{sub 5}, where it weakly chemically interacts with neighboring oxygen anions, and results in less volume expansion compared to Y{sub 2}Ti{sub 2}O{sub 7}, reducing strains in the iron matrix. The corresponding helium mobility in these channels is very high. While its ultimate fate is to form oxide/matrix interface bubbles, transient deep trapping of helium in oxides plays a major role in the ability of NFA to manage helium distribution.
Assessment of low-scaling approximations to the equation of motion coupled-cluster singles and doubles equations
Methods for fast and reliable computation of electronic excitation energies are in short supply, and little is known about their systematic performance. This work reports a comparison of several low-scaling approximations to the equation of motion coupled cluster singles and doubles (EOM–CCSD) and linear-response coupled cluster singles and doubles (LR–CCSD) equations with other single reference methods for computing the vertical electronic transition energies of 11 small organic molecules. The methods, including second order equation-of-motion many-body perturbation theory (EOM–MBPT2) and its partitioned variant, are compared to several valence and Rydberg singlet states. We find that the EOM–MBPT2 method was rarely more than a tenth of an eV from EOM–CCSD calculated energies, yet demonstrates a performance gain of nearly 30%. The partitioned equation-of-motion approach, P–EOM–MBPT2, which is an order of magnitude faster than EOM–CCSD, outperforms the CIS(D) and CC2 in the description of Rydberg states. CC2, on the other hand, excels at describing valence states where P–EOM–MBPT2 does not. The difference between the CC2 and P–EOM–MBPT2 can ultimately be traced back to how each method approximates EOM–CCSD and LR–CCSD. The results suggest that CC2 and P–EOM–MBPT2 are complementary: CC2 is best suited for the description of valence states while P–EOM–MBPT2 proves to be a superior O(N{sup 5}) method for the description of Rydberg states.
Partially coherent wavefront propagation simulations: Mirror and monochromator crystal quality assessment
We have applied fully-and partially-coherent synchrotron radiation wavefront propagation simulations, implemented in the “Synchrotron Radiation Workshop” (SRW) computer code, to analyse the effects of imperfect mirrors and monochromator at the Coherent Hard X-ray beamline. This beamline is designed for X-ray Photon Correlation Spectroscopy, a technique that heavily relies on the partial coherence of the X-ray beam and benefits from a careful preservation of the X-ray wavefront. We present simulations and a comparison with the measured beam profile at the sample position, which show the impact of imperfect optics on the wavefront.
A Framework to Assess Advanced Reactor Spent Fuel Management Facility Deployment
Advanced nuclear reactors offer various operational advantages over existing light water reactors but could produce types of spent nuclear fuel (SNF) with a wide variety of forms and characteristics depending on how many different concepts are deployed. Each advanced reactor SNF type potentially poses unique management challenges. New planning efforts will be necessary to anticipate how the management requirements of advanced reactor SNF will affect the deployment of an integrated waste management system. This paper applies a framework of high-level facility deployment milestones to a generic SNF management system, reviewing them together with the advanced reactor SNF characteristics and management requirements. This allows for the investigation of factors that influence facility and system deployment, and ultimately, the identification of challenges facing the deployment of different kinds of SNF management facilities. Here, the back end of the once-through fuel cycle is examined for four advanced reactor system technology types: sodium-cooled fast reactors, high-temperature gas-cooled reactors, liquid-fuel molten salt reactors, and lead-cooled fast reactors. It is observed that milestones earlier in the facility deployment process (e.g., siting and facility design) are more impacted by the uniqueness of advanced reactor SNF characteristics than others (e.g., construction and testing). Ultimately, none of the differences are seen as fundamentally disqualifying in a technical sense; however, they should be considered early, potentially as part of reactor design, to avoid issues in the future.
Assessment of the Lagrange Discrete Ordinates Equations for Three-Dimensional Neutron Transport
The Lagrange Discrete Ordinates (LDO) equations, developed by Ahrens as an alternative to the traditional discrete ordinates formulation, have been implemented in Denovo, a threedimensional radiation transport code developed by Oak Ridge National Laboratory. The LDO equations retain the formal structure of the classical discrete ordinates equations but treat particle scattering in a different way. Solutions of the LDO equations have an interpolatory structure such that the angular flux can be naturally evaluated at directions other than the discrete ordinates used in arriving at the solutions, and the ordinates themselves may be chosen in a strategic way for the problem under consideration. Of particular interest is that the LDO equations have been shown to mitigate ray effects at increased angular resolutions. In this paper we present scalar flux solutions of the LDO equations for a small number of test cases of interest and compare the results against flux solutions generated using standard quadrature types. The LDO equations’ flux solutions were found to be comparable to those resultant from the standard quadrature types in value; results from the LDO equations were also found to be commensurate with those of standard quadrature types when comparing the flux solutions in the context of the experimental benchmark test case examined.