Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “2018”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

NREL Pyrheliometer Comparisons: September 24 - October 5, 2018 (NPC-2018)

Accurate measurements of direct normal (beam) solar irradiance from pyrheliometers are important for developing and deploying solar energy conversion systems, improving our understanding of the Earth's energy budget for climate change studies, and for other science and technology applications involving solar flux. Providing these measurements places many demands on the quality system used by the operator of commercially available radiometers. Maintaining accurate radiometer calibrations that are traceable to an international standard is the first step in producing research-quality solar irradiance measurements. In 1977, the World Meteorological Organization (WMO) established the World Radiometric Reference (WRR) as the international standard for the measurement of direct normal solar irradiance (Frohlich 1991). The WRR is an internationally recognized, detector-based measurement standard determined by the collective performance of six electrically self-calibrated absolute cavity radiometers comprising the World Standard Group (WSG). Various countries, including the United States, have contributed these specialized radiometers to the Physikalisch-Meteorologisches Observatorium Davos - World Radiation Center (PMOD/WRC) to establish the WSG. As with all measurement systems, Absolute Cavity Radiometers (ASR) are subject to performance changes over time. Therefore, PMOD/WRC in Davos, Switzerland, hosts an International Pyrheliometer Comparison (IPC) for transferring the WRR to participating radiometers quinquennialy by invitation. NREL has represented the U.S. Department of Energy (DOE) in each IPC since 1980. As a result, NREL has developed and maintained a select group of absolute cavity radiometers with direct calibration traceability to the WRR, and uses these reference instruments to calibrate pyrheliometers and pyranometers using the International Organization for Standardization (ISO) 17025 accredited Broadband Outdoor Radiometer Calibration (BORCAL) process (Reda et al. 2008). To fill the gap between each IPC, NREL pyrheliometer comparisons (NPCs) are held annually at the Solar Radiation Research Laboratory (SRRL) in Golden, Colorado. Open to all ACR owners and operators, each NPC provides an opportunity to determine the unique WRR transfer factor (WRR-TF) for each participating pyrheliometer. By adjusting all subsequent pyrheliometer measurements by the appropriate WRR-TF, the solar irradiance data are traceable to the WRR. NPC-2018 was September 24 through October 5, 2018. Participants operated 43 ACRs to simultaneously measure clear-sky direct normal solar irradiance during this period. The Transfer Standard Group (TSG) of reference radiometers for NPC-2018 consisted of four NREL radiometers with direct traceability to the WRR, having participated in the Twelfth International Pyrheliometer Comparisons (IPC-XII) in the fall of 2015. As a result of NPC-2018, each participating absolute cavity radiometer was assigned a new WRR-TF, computed as the reference irradiance determined by the TSG divided by the observed irradiance from the participating radiometer. The performance of the TSG during NPC-2018 was consistent with previous comparisons, including IPC-XII. The measurement performance of the TSG allowed the transfer of the WRR to each participating radiometer with an estimated uncertainty of plus/minus 0.36% with respect to the International System of Units.

14 SOLAR ENERGY↗

Discharge Permit-1845 Quarterly Status Report October 2018

Trichloroethene (TCE) and nitrate have been identified as constituents of concern in groundwater at the Sandia National Laboratories, New Mexico (SNL/NM) Technical Area (TA)-V Groundwater (TAVG) Area of Concern (AOC) based on detections above the U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) in samples collected from monitoring wells. The EPA MCLs and the State of New Mexico drinking water standards for TCE and nitrate are 5 micrograms per liter and 10 milligrams per liter (as nitrogen), respectively. A phased Treatability Study/Interim Measure (TS/IM) of in-situ bioremediation (ISB) is being implemented to evaluate the effectiveness of ISB as a potential technology to treat the groundwater contamination at the TAVG AOC (New Mexico Environment Department [NMED] April 2016). The NMED Hazardous Waste Bureau (HWB) approved the Revised Treatability Study Work Plan (TSWP) (SNL/NM March 2016) in May 2016 (NMED May 2016). The SNL/NM Environmental Restoration Operations personnel are responsible for implementing the TS/IM of ISB at TAVG AOC in accordance with the Revised TSWP. Per the Revised TSWP, up to three injection wells (TAV-INJ1, TAV-INJ2, and TAV-INJ3) would be installed at TA-V in the vicinity of the highest contaminant concentrations detected in groundwater at monitoring wells LWDS-MW1, TAV-MW6, and TAV-MW10. The injection wells would be used to gravity-inject substrate solution and biodegradation bacteria to groundwater. The substrate solution consists of an inert tracer as well as essential food and nutrients for biostimulation. The substrate solution would be prepared in aboveground tanks. The TS/IM would be conducted in two phases: Phase I includes a pilot test followed by full-scale injection at the first injection well (TAV-INJ1); Phase II includes full-scale injections at the second and third injection wells (TAV-INJ2 and TAV-INJ3). The NMED Ground Water Quality Bureau (GWQB) requires a groundwater Discharge Permit (DP) for the operation of injection wells. NMED GWQB issued the DP-1845 to the U.S. Department of Energy/National Nuclear Security Administration (DOE/NNSA) for the SNL/NM TA-V Treatability Study injection wells on May 26, 2017 (NMED May 2017). The DP-1845 term started on May 30, 2017 and ends on May 30, 2022. Attachment A provides a copy of DP-1845. This quarterly report provides responses to DP-1845 Operating Conditions Terms and Conditions #3 through #8 and Monitoring and Reporting Terms and Conditions #10 through #17 for the April 1 to June 30, 2018 reporting period. The other Terms and Conditions are NMED statements of fact and do not require a response.

54 ENVIRONMENTAL SCIENCES↗

High-Octane Gasoline from Lignocellulosic Biomass via Syngas and Methanol/Dimethyl Ether Intermediates: 2018 State of Technology and Future Research

This report will update modeled costs for the production of high-octane gasoline via gasification of biomass followed by syngas cleanup and conversion to methanol/dimethyl ether. The 2018 State of Technology will be based on recent bench-scale experimental results. This report will also update previously published information for this conversion pathway in the DOE Bioenergy Technologies Office 2016 Multi-Year Program Plan with current understanding of research goals achievable by 2022 and associated modeled cost reductions. All costs will be updated to a consistent set of assumptions in 2016 dollars.

09 BIOMASS FUELS↗

2018 Community Commitment Plan Report [Poster]

Addressing the Greatest Challenges in Our Communities: Sandia National Laboratories (Sandia) is committed to being an informed, compassionate and contributing neighbor in our local communities. This commitment has been demonstrated throughout Sandia's history and is an enduring part of our future. New Mexico faces many challenges, including the highest childhood poverty rate in the United States. According to a recent community perception survey, the biggest issue facing Albuquerque is crime, followed by unemployment, and concerns that the educational system is poor. Lack of affordable housing and insufficient educational achievement are issues in the Bay Area near our Livermore site. In 2018, National Technology and Engineering Solutions of Sandia contributed $1.4M to non-profits and organizations that provide critical resources and services to address the greatest challenges in Sandia's communities.

99 GENERAL AND MISCELLANEOUS↗

Sodium Freezing and Remelting Tests in FY 2018

In FY 2017 and FY 2018, a total of thirteen tests were successfully performed in the Sodium Freezing and Remelting test facility. Each new test was carefully designed based upon the results and findings of the previous test to investigate the effects of different factors on the sodium freezing phenomena, including dissolved Ar cover gas versus vacuum, test section cooling rate during freezing, different freezing patterns (e.g., from the free surfaces inward toward the center versus from the center toward the free surfaces), and Ar cover gas pressure. The freezing results were found to depend upon a combination of phenomena. As more tests were conducted and lessons learned, the conduct of the tests improved. In particular, the last three experiments, Tests 11 through 13, may be singled out as providing representative data under well controlled conditions. The maximum stresses arising from sodium freezing are measured to be quite mild. In the tests, a maximum strain change of 60 radial micro strains was measured, equivalent to a stress/negative pressure of 77 psi. This mild maximum stress is thought to reflect the low yield stress of solid sodium near the freezing temperature. Evidence for yielding of solid sodium is provided by the visual observation of a depression in the frozen sodium free surface inside of the sodium reservoir in one test. It is thought that contraction of sodium in the test section during freezing pulled downward on the frozen sodium at the free surface creating the depression. The authors are not aware of any data for the yield stress of solid sodium or the stress versus strain behavior of solid sodium (sodium is not a structural material). It is thus not possible to directly compare with the solid sodium yield strength. However, stress versus strain data at different temperatures up to the freezing temperature are available for solid lithium which is also a alkali metal and has a low yield strength similar to the maximum stresses determined from the Sodium Freezing and Remelting tests providing support for the interpretation of the results in terms of yielding of solid sodium. This is a good result for Sodium-Cooled Fast Reactors and sodium facilities. The maximum stress due to frozen sodium pulling inward upon a structural wall wetted by sodium and to which the sodium adheres will be limited by the low sodium yield stress. Argon has a significant solubility in sodium. Cavitation due to nucleation of dissolved argon can offset the effects of sodium thermal contraction and alleviate the formation of stress/negative pressure. This is also a good result for Sodium-Cooled Fast Reactors and sodium facilities that operate with an argon cover gas. In the tests, it was found that due to the cavitation, the maximum measured strain change during sodium freezing was limited to 10 axial micro strains, or equivalently 55 psi of negative pressure.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Summary of Expansions and Updates in GREET® 2018

The GREET® (Greenhouse gases, Regulated Emissions, and Energy use in Transportation) model has been developed by Argonne National Laboratory (Argonne) with the support of the U.S. Department of Energy(DOE). GREET is a life-cycle analysis (LCA) tool, structured to systematically examine energy and environmental effects of a wide variety of transportation fuels and vehicle technologies in major transportation sectors (i.e., road, air, marine, and rail). There are two GREET modeling platforms; GREET Excel is a multidimensional spreadsheet model that provides a comprehensive LCA tool, and GREET.Net provides an interactive graphical toolbox to perform LCA. The GREET 2018 release includes expansions and updates for both platforms, and this report provides a summary of the release.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The ISTI Rapid Response on Exploring Cloud Computing 2018

The Information Science & Technology Institute (ISTI), with partnering entities at Los Alamos National Laboratory (LANL), regularly organizes and executes Rapid Response efforts in mission-relevant growth areas within information science. This report describes 18 projects conducted at LANL in response to a Rapid Response Familiarization call titled “Exploring Cloud Computing 2018.”

97 MATHEMATICS AND COMPUTING↗

Results for the Second Quarter Calendar Year 2018 Tank 50 Salt Solution Sample

In this Technical Report, the chemical and radionuclide contaminant results from the Second Quarter Calendar Year 2018 (CY18) sample of Tank 50 salt solution are presented in tabulated form. The information from this characterization will be used by Savannah River Remediation (SRR) for the transfer of aqueous waste from Tank 50 to the Saltstone Production Facility, where the waste will be treated and disposed in the Saltstone Disposal Facility.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Summary Report of the Tri-Lab Workshop on R&D Pathways for Future Energy Systems, July 24-25, 2018

Under Secretary of Energy Menezes called for an integrated view of U.S. Department of Energy (DOE) applied energy activities and requested that the three applied energy laboratories - Idaho National Laboratory, the National Energy Technology Laboratory, and the National Renewable Energy Laboratory - take a fresh look at their portfolios for gaps and coordination opportunities. A workshop was held July 24-25, 2018 with teams from DOE, INL, NETL, and NREL.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

9 th American Conference on Neutron Scattering (ACNS 2018)

The 9th American Conference on Neutron Scattering (ACNS) was held June 24-28, 2018 in College Park, Maryland. The meeting was coordinated by the Neutron Scattering Society of America (NSSA) and attracted 335 registered attendees. The meeting was chaired by NSSA vice president Patrick Woodward (The Ohio State University) assisted by NSSA president Despina Louca (University of Virginia, NSSA secretary Katherine Page (Oak Ridge National Laboratory), and local organizing chairs Rob Briber (University of Maryland) and Peter Gehring (NIST Gaithersburg). As in past years, the Materials Research Society assisted with planning, logistics and operation of the conference. The meeting schedule consisted of a morning common session featuring a lecture by a scientist receiving an award from the NSSA and a plenary lecture. The remainder of the scientific program consisted of four parallel sessions featuring invited and contributed talks together with poster sessions in the afternoon / evening. The science program was coordinated by program co-chairs Efrain Rodriguez (University of Maryland) and Matt Helgeson (University of California Santa Barbara) and was divided into the following research areas: (a) Advances in Neutron Methods; (b) Hard Condensed Matter; (c) Soft Matter; (d) Biological Structures and Dynamics; (e) Neutrons for Energy and Sustainability; (f) Materials Chemistry and Synthesis; (g) Structural Materials and Engineering; and (h) Neutron Physics.

36 MATERIALS SCIENCE↗

Discharge Permit DP-1845 Quarterly Report (July — September 2018)

Discharge Permit (DP)-1845 was issued by the New Mexico Environment (NMED) Ground Water Quality Bureau (GWQB) for discharges via up to three injection wells in a phased Treatability Study of in-situ bioremediation of groundwater at the Sandia National Laboratories, New Mexico, Technical Area-V Groundwater Area of Concern. This report fulfills the quarterly reporting requirements set forth in DP-1845, Section IV.B, Monitoring and Reporting. This reporting period is July 1 through September 30, 2018. The report is due to NMED GWQB by February 1, 2019.

54 ENVIRONMENTAL SCIENCES↗

LDRD project summaries- Projects ending in fiscal year 2018

Laboratory Directed Research and Development (LDRD) plays a vital role in helping INL fulfill its nuclear energy, broader clean energy and national security missions. INL’s LDRD investments are focused on high-impact outcomes, modernizing and enhancing INL’s core capabilities and recruiting some of the world’s top science and technology (S&T) talent. This report includes summaries of LDRD projects that ended in FY18, as well as a summary poster that was presented at a poster session held August 2018.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Meteorological services annual data report for 2018

This document presents the meteorological data collected at Brookhaven National Laboratory (BNL) by Meteorological Services (Met Services) for the calendar year 2018. The purpose is to publicize the data sets available to emergency personnel, researchers and facility operations. Met services has been collecting data at BNL since 1949. Data from 1994 to the present is available in digital format. Data is presented in monthly plots of one-minute data. This allows the reader the ability to peruse the data for trends or anomalies that may be of interest to them. Full data sets are available to BNL personnel and to a limited degree outside researchers. The full data sets allow plotting the data on expanded time scales to obtain greater details (e.g., daily solar variability, inversions, etc.).

54 ENVIRONMENTAL SCIENCES↗

Results for the Third Quarter Calendar Year 2018 Tank 50 Salt Solution Sample

In this Technical Report, the chemical and radionuclide contaminant results from the Third Quarter Calendar Year 2018 (CY18) sample of Tank 50 salt solution are presented in tabulated form. The information from this characterization will be used by Savannah River Remediation (SRR) for the transfer of aqueous waste from Tank 50 to the Saltstone Production Facility, where the waste will be treated and disposed in the Saltstone Disposal Facility. This Technical Report compares results, where applicable, to Saltstone Production Facility (SPF) Waste Acceptance Criteria (WAC) limits and targets. The chemical and radionuclide contaminant results from the characterization of the Third Quarter CY18 sampling of Tank 50 were requested by SRR personnel via a Task Technical Request (TTR) and details of the testing are presented in the Savannah River National Laboratory (SRNL) Task Technical and Quality Assurance Plan (TTQAP). This Technical Report is part of Deliverable 2 relating to Task 1 from the SRR request. Data pertaining to the regulatory limits for Resource Conservation and Recovery Act (RCRA) metals will be documented at a later time per the TTQAP for the Tank 50 Saltstone task.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Saltstone Second Quarter Calendar Year 2018 (2QCY18) Toxicity Characteristic Leaching Procedure (TCLP) Results

The aqueous waste from Tank 50 (salt solution) is sampled quarterly for transfers to the Saltstone Production Facility (SPF). Salt solution is treated at SPF and disposed of in the Saltstone Disposal Facility (SDF). A SDF waste form (saltstone) was prepared in the Savannah River National Laboratory (SRNL) from the Tank 50 Waste Acceptance Criteria (WAC) sample and Z-Area premix material for the second quarter of calendar year 2018 (2QCY18). Results from this memorandum support Task 2: ‘Grout Leaching Analyses’ of the Task Technical Request (TTR) prepared by Savannah River Remediation (SRR). After a 28 day cure, a sample of the SDF waste form was collected and shipped to a certified laboratory for analysis using the Toxicity Characteristic Leaching Procedure (TCLP). The 2QCY18 saltstone sample met the South Carolina (SC) Code of Regulations for Hazardous Waste Management Regulations (HWMR) 61-79.261.24 and 61-79-268.48 requirements for a non-hazardous waste form with respect to Resource Conservation and Recovery Act (RCRA) metals and Underlying Hazardous Constituents (UHCs), and also met the SPF WAC.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization Results For The July 2018 H-Tank Farm 2h Evaporator Overhead Samples

This report contains the radioanalytical results of the 2H evaporator overhead sample received at Savannah River National Laboratory (SRNL) on July 16, 2018. Specifically, concentrations of 137 Cs, 90 Sr, and 129 I are reported and compared to the corresponding Waste Acceptance Criteria (WAC) limits of the Effluent Treatment Project (ETP) Waste Water Collection Tank (WWCT) (rev. 6). The radionuclide concentrations in the sample were found to be in compliance with the ETP WAC limits.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗