SEARCH · Engineering Papers

Results for “wave model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Possibility of 14 C cluster as a building block of medium-mass nuclei

The possibility of the 14 C cluster being a basic building block of medium-mass nuclei is discussed. Although α cluster structures have been widely discussed in the light N ≈ Z mass region, the neutron-to-proton ratio deviates from unity in the nuclei near β-stability line and in neutron-rich nuclei. Thus, more neutron-rich objects with N > Z could become the building blocks of cluster structures in such nuclei. The 14 C nucleus is strongly bound and can be regarded as such a candidate. In addition, the path to the lowest shell-model configuration at short relative distances is closed for the 14 C+ 14 C structure, contrary to the case of the 12 C+ 12 C structure; this allows an appreciable separation distance between the 14 C clusters. The recent development of the antisymmetrized quasicluster model (AQCM) allows us to utilize a j j-coupling shell-model wave function for each cluster in a simplified way. The AQCM results for the 14 C+ 14 C structure in 28 Mg are compared with the ones of cranked relativistic mean field (CRMF) calculations. Although theoretical frameworks of these two models are quite different, they give similar results for the nucleonic densities and rotational properties of the structure under investigation. The existence of a linear chain three- 14 C cluster structure in 42 Ar has also been predicted in AQCM. Furthermore, these results confirm the role of the 14 C cluster as a possible building block of cluster structures in medium-mass nuclei.

20 ≤ A ≤ 38↗

NASA NTRS1988

Modeling of wave-coherent pressures in the turbulent boundary layer above water waves

The behavior of air pressure fluctuations induced by progressive water waves generated mechanically in a laboratory tank was simulated by solving a modified Orr-Sommerfeld equation in a transformed Eulerian wave-following frame of reference. Solution is obtained by modeling the mean and wave-coherent turbulent Reynolds stresses, the behavior of which in the turbulent boundary layer above the waves was simulated using a turbulent kinetic energy-dissipation model, properly modified to account for free-surface proximity and favorable pressure gradient effects. The distribution of both the wave-coherent turbulent Reynolds stress and pressure amplitudes and their corresponding phase lags was found to agree reasonably well with available laboratory data.

Papadimitrakis, Yiannis ALEX.↗

NASA NTRS1985

A simple model for the interaction between vertical eddy heat fluxes and static stability

A numerical model for studying the interaction of vertical eddy heat fluxes and vertical temperature structure in midlatitude regions is described. The temperature profile for the model was derived from calculations of the equilibrium among heating rates in simplified representations of large-scale vertical eddy heat flux, moist convection and radiation. An eddy flux profile is calculated based on the quasi-geostrophic, liner baroclinic instability of a single wave. Model equilibrium states for summer and winter conditions are compared with observations, and the results are discussed in detail.

Gutowski, W. J., Jr.↗

NASA NTRS1995

Application of essentially nonoscillatory methods to aeroacoustic flow problems

A finite-difference essentially nonoscillatory (ENO) method has been applied to several of the problems prescribed for the workshop sponsored jointly by the Institute for Computer Applications in Science and Engineering and by NASA Langley Research Center entitled 'Benchmark Problems in Computational Aeroacoustics'. The workshop focused on computational challenges specific to aeroacoustics. Among these are long-distance propagation of a short-wavelength disturbance, propagation of small-amplitude disturbances, and nonreflective boundary conditions. The shock capturing-capability inherent to the ENO method effectively eliminates oscillations near shock waves without the need to add and tune dissipation or filter terms. The method-of-lines approach allows the temporal and spatial operators to be chosen separately in accordance with the demands of a particular problem. The ENO method was robust and accurate for all problems in which the propagating wave was resolved with 8 or more points per wavelength. The finite-wave-model boundary condition, a local nonlinear acoustic boundary condition, performed well for the one-dimensional problems. The buffer-domain approach performed well for the two-dimensional test problem. The amplitude of nonphysical reflections were less than 1 percent of the exiting wave's amplitude.

Atkins, Harold L.↗

NASA NTRS1981

Effect of driven-wall motion on a turbulent boundary layer

An acoustically driven wall model with amplitudes greater than 0.01 cm was used to study the effect of unsteady wall boundary conditions on the structure of a zero-pressure-gradient turbulent boundary layer. Hot-wire measurements showed large variations in fluctuation quantities (including Reynolds stress) along each model wave. These longitudinal variations decreased rapidly with increasing distance from the driven wall, but the average level of these fluctuations decreased only slightly even outside the boundary layer. When the acoustical fluctuations were subtracted, the remaining fluctuations were essentially the same as for the undriven model. It is concluded that there is no significant interaction between the acoustic and turbulent fluctuations.

Weinstein, L. M.↗

NASA NTRS1975

A model for generation of bow-shock-associated upstream waves

A model is proposed for the generation of upstream hydromagnetic waves by proton beams reflected at the earth's bow shock. It is assumed that the reflection process can produce some gyrophase bunching of the protons, thus creating a gyrophase disturbance that propagates with the beam as it streams back along interplanetary field lines. This leads to the production of driven hydromagnetic waves in the left-hand mode. The resulting theory predicts a wave amplitude, frequency, and polarization in the solar wind rest frame. The amplitude depends on the fraction of protons assumed to be phase coherent in their gyromotion and on the plasma beta, beam velocity, temperatures, and the Alfven Mach number. The theory also predicts the Doppler-shifted frequencies and the apparent sense of polarization that would be observed in satellite measurement frames.

Fredricks, R. W.↗

NASA NTRS1987

A new class of stratospheric vacillations in a highly truncated model due to wave interference

A new class of vacillations is obtained in the Holton and Mass model with a different bottom boundary condition. The model is a highly truncated spectral model describing wave-zonal flow interactions in a forced-dissipative system. The mean zonal wind and the wave change their vertical structures periodically with a period of the wave progression (5-10 days for the parameters used in this study). The vacillations are interpreted as an interference between a stationary wave and a topographically modified Rossby wave. The modified Rossby wave is an eigenmode of baroclinic flow in the presence of bottom topography within the framework of the highly truncated system. Time variations of the mean zonal wind are essential for the modification of the Rossby wave.

Yoden, Shigeo↗

DOE OSTI2024

Reduced Order Model for Guided Wave Propagation on Gas Pipelines to Enable Real-Time Simulation

Reduced order model for simulation of Guided wave propagation is presented here. The utilization of reduced order models ensures efficient data generation for a variety of parameters where it takes huge computational effort to simulate, crucial for timely monitoring and decision-making. Autoencoder based reduced order models are proposed here, which are trained on simulated data from open-source finite element framework, Firedrake.

Bukka, Sandeep Reddy↗

DOE OSTI2024

Reduced Order Model for Guided Wave Propagation on Gas Pipelines to Enable Real-Time Simulation

Bukka, Sandeep Reddy↗

NASA NTRS1983

Age dependence of oceanic intraplate seismicity and implications for lithospheric evolution

The present investigation is concerned with the determination of the depths for 16 oceanic intraplate earthquakes using body wave modeling. It is found that oceanic intraplate earthquake depths show a clear deepening of the maximum focal depth with increasing lithospheric age. The thickness of the lithosphere in which oceanic intraplate earthquakes occur is approximately equal to or slightly greater than the flexural elastic thickness, but is much less than the seismic thickness determined from surface wave dispersion. Oceanic intraplate earthquakes are found to occur at greater depths and temperatures than has been previously observed for continental crustal events.

Wiens, D. A.↗

DOE OSTI2025

Reconstructing the Wave Function of Magnetic Topological Insulators MnBi 2 ⁢Te 4 and MnBi 4 ⁢Te 7 Using Spin-Resolved Photoemission

Despite their importance for exotic quantum effects, the surface electronic structure of magnetic topological insulators MnBi 2 ⁢Te 4 and MnBi 4 ⁢Te 7 remains poorly understood. Using high-efficiency spin- and angle-resolved photoemission spectroscopy, we directly image the spin-polarization and orbital character of the surface states in both compounds and map our observations onto a model wave function to describe the complex spin-orbital texture, which solidifies our understanding of the surface band structure by establishing the single-band nature of the most prominent states. Most importantly, our analysis reveals a new mechanism for reducing the magnetic gap of the topological surface states based on the orbital composition of the wave function.

Han, Xue [SLAC National Accelerator Laboratory (SL↗

NASA NTRS1980

Planetary wave coupling between the troposphere and the middle atmosphere as a possible sun-weather mechanism

The possibility of planetary wave coupling between the troposphere and solar-induced alterations in the upper atmosphere providing a viable mechanism for giving rise to sun-weather relationships is investigated. Some of the observational evidence for solar-activity-induced effects on levels of the upper atmosphere ranging from the thermosphere down to the lower stratosphere are reviewed. It is concluded that there is evidence for such effects extending down to the middle stratosphere and below. Evidence is also reviewed that these effects are due to changes in solar ultraviolet emission during disturbed solar conditions. A theoretical planetary wave model is then used to see at what levels in the upper atmosphere moderate changes in the mean zonal wind state would result in tropospheric changes. It is concluded that changes in the mean zonal flow of about 20% at levels in the vicinity of 35 km or below would give rise to changes in the tropospheric planetary wave pattern that are less than but on the same order as the observed interannual variability in the tropospheric wave pattern at middle and high latitudes.

Geller, M. A.↗

DOE OSTI2021

Open-Loop Control of Adjustable Tuned Mass Dampers for Floating Wind Turbine Platforms: Preprint

Floating offshore wind turbines have several advantages over their land-based counterparts, including access to stronger, more consistent winds and proximity to population centers. However, increased costs from the platform have been a challenge inhibiting their widespread adoption. New damping technologies with tunable target frequencies and damping ratios promise a greater degree of control over platform motions, allowing hulls to be designed smaller and reducing the overall cost of the turbines. In this work, a control strategy is proposed for these adjustable tuned mass dampers (TMDs). A frequency-domain model of the system is developed, from which response amplitude operators (RAOs) for the platform's rigid-body modes can be obtained for different natural frequencies and damping ratios of the dampers. Using these RAOs, and JONSWAP spectrums of operational and extreme sea states, the performance of the various damper settings are compared by evaluating the standard deviation of a rigid-body motion of interest (platform pitch or heave). By finding the optimal damper setting for a range of representative design load cases (DLCs), a lookup function is made to return the damper target frequency given the peak period of the sea state. To determine the current sea state, we propose a simple estimator that uses wave measurements (e.g., from a measurement buoy) to determine the peak period and significant wave height. The significant wave height is determined using the statistics of the past 100 seconds of wave elevation information and the peak period is computed using a frequency locked loop. Initial results show that we can use these estimated values to control the TMD natural frequency with an open loop controller. The controlled system is tested in a range of environmental conditions determined by the International Electrotechnical Commission design load cases (DLCs), which include normal and extreme wind and wave models. In these tests, we compare the performance of 4 cases: (1) no TMD, (2) a constant TMD based on the worst case DLC, (3) a controlled TMD based on known wind and wave environments, and (4) a real-time controlled TMD using estimated wind and wave environments. The effect of hull-based TMD control is also compared to changes in traditional wind turbine control via blade pitch.

control↗

NASA NTRS1994

Structure of relativistic shocks in pulsar winds: A model of the wisps in the Crab Nebula

We propose a model of a optical 'wisps' of the Crab Nebula, features observed in the nebular synchrotron surface brightness near the central pulsar, as manifestations of the internal structure of the shock terminating the pulsar wind. We assume that this wind is composed of ions and a much denser plasma of electrons and positrons, frozen together to a toroidal magnetic field and flowing relativistically. We construct a form of solitary wave model of the shock structure in which we self-consistently solve for the ion orbits and the dynamics of the relativistically hot, magnetized e(+/-) background flow. We ignore dispersion in the ion energies, and we treat the pairs as an adiabatic fluid. The synchrotron emission enhancements, observed as the wisps, are then explained as the regions where reflection of the ions in the self-consistent magnetic field causes compressions of the e(+/-).

Gallant, Yves A.↗

DOE OSTI2023

Investigation of Theoretical Solutions to a Bottom-Raised Oscillating Surge Wave Energy Converter (OSWEC) Through Experimental and Parametric Studies

Experiments were conducted on a wave tank model of a bottom raised oscillating surge wave energy converter (OSWEC) model in regular waves. The OSWEC model shape was a thin rectangular flap, which was allowed to pitch in response to incident waves about a hinge located at the intersection of the flap and the top of the supporting foundation. Torsion springs were added to the hinge in order to position the pitch natural frequency at the center of the wave frequency range of the wave maker. The flap motion as well as the loads at the base of the foundation were measured. The OSWEC was modeled analytically using elliptic functions in order to obtain closed form expressions for added mass and radiation damping coefficients, along with the excitation force and torque. These formulations were derived and reported in a previous publication by the authors. While analytical predictions of the foundation loads agree very well with experiments, large discrepancies are seen in the pitch response close to resonance. These differences are analyzed by conducting a sensitivity study, in which system parameters, including damping and added mass values, are varied. The likely contributors to the differences between predictions and experiments are attributed to tank reflections, standing waves that can occur in long, narrow wave tanks, as well as the thin plate assumption employed in the analytical approach.

analytical↗

DOE OSTI2020

Microscopic study of the coupled-wire construction and plausible realization in spin-dependent optical lattices

Coupled-wire constructions offer particularly simple and powerful models to capture the essence of strongly correlated topological phases of matter. They often rely on effective theories valid in the low-energy and strong-coupling limits, which impose severe constraints on the physical systems where they could be realized. In this work, we investigate the microscopic relevance of a class of coupled-wire models and their possible experimental realization in cold-atom experiments. We connect with earlier results and prove the emergence of fractional quantum Hall states in the limit of strong interwire tunneling. Contrary to previous studies relying on renormalization group arguments, our microscopic approach exposes the connection between coupled-wire constructions and model wave functions in continuum Landau levels. Then, we use exact-diagonalization methods to investigate the appearance of these fractional quantum Hall states in more realistic settings. We examine the parameter regimes where these strongly correlated phases arise, and provide a way to detect their appearance in cold-atom experiments through standard time-of-flight measurements. Motivated by this experimental probe, we finally propose a realization of our model with cold atoms in spin-dependent optical lattices. Our estimates show that the previous fractional quantum Hall phases lie within experimentally accessible parameter regimes, giving a viable route toward their experimental study.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS2021

Modeling of Guided Waves for Aerospace Applications

Advancements in computer hardware has led to new possibilities for rapid modeling and simulation capabilities across many scientific fields. Nondestructive evaluation (NDE) can benefit from increased use of simulation tools to guide optimization of inspection and health monitoring methods, enhance understanding of data, aid in development of defect characterization methods, and generate data sets for use with machine learning and model-assisted probability of detection. Recent work at NASA has entailed development and benchmarking of both custom simulation codes and commercial simulation tools for ultrasonic wave propagation. This paper describes recent work at NASA in modeling of guided waves in composites and other aerospace materials. Results and computational speeds for a composite benchmark case are reported for a custom finite difference Rotated Staggered Grid code and for the commercial finite element software package, Pogo. Recent progress in linking NDE models to parametric analysis tools is also discussed.

Nondestructive evaluation↗

DOE OSTI2024

2-D seismic wave propagation using the distributional finite-difference method: further developments and potential for global seismology

SUMMARY We present a time-domain distributional finite-difference scheme based on the Lebedev staggered grid for the numerical simulation of wave propagation in acoustic and elastic media. The central aspect of the proposed method is the representation of the stresses and displacements with different sets of B-splines functions organized according to the staggered grid. The distributional finite-difference approach allows domain-decomposition, heterogeneity of the medium, curvilinear mesh, anisotropy, non-conformal interfaces, discontinuous grid and fluid–solid interfaces. Numerical examples show that the proposed scheme is suitable to model wave propagation through the Earth, where sharp interfaces separate large, relatively homogeneous layers. A few domains or elements are sufficient to represent the Earth’s internal structure without relying on advanced meshing techniques. We compare seismograms obtained with the proposed scheme and the spectral element method, and we show that our approach offers superior accuracy, reduced memory usage, and comparable efficiency.

Geochemistry & Geophysics↗