Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “visible light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Extreme Molecular Complexity Resulting in a Continuum of Carbonaceous Species in Biomass Burning Tar Balls from Wildfire Smoke

Biomass burning emits a wide range of carbonaceous particles into the atmosphere and has negative impacts on human health and the Earth’s radiative balance. Nonvolatile spherical organic aerosol particles, commonly known as tar balls, represent one of the most abundant particles in aged biomass burning smoke. However, the detailed molecular-level composition of ambient tar balls is largely unknown but critical to access their environmental impacts. Ambient aerosol samples collected during a wildfire event, which were ~90% tar balls by number fraction, were analyzed using ultrahigh resolution Orbitrap Elite mass spectrometry with four complementary ionization modes. Our results show the molecular composition of tar balls to be complex, composed of over 10,000 molecular formulas. Model estimated saturation mass concentrations and relative humidity dependent glass transition temperatures were consistent with low volatility and solid morphology as expected for tar balls. Room-temperature evaporation kinetics showed that these particles were composed of ~90% non-volatile species. The molecular complexity detected here signifies a continuum of carbonaceous species, ranging from C3 to C45 with continuous ranges of oxygenation and hydrogen saturation for each Cn. Approximately 24% of molecular formulas were estimated the be highly aromatic, which could indicate chemical compounds with negative health effects, and which may contribute to visible light absorption. The carbon continuum observed here has significant implications for the molecular characterization of atmospheric organic matter. The level of complexity detected here should not be ignored in future studies and we demonstrate that multiple analytical methods may be required to suitably interpret this complexity on a molecular level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Iodine (I) Expulsion at Photoirradiated Mixed Halide Perovskite Interface. Should I Stay or Should I Go?

Visible light irradiation of the mixed halide perovskite film in contact with a solvent (dichloromethane, DCM) in which the film otherwise is stable, leads to selective expulsion of iodide (I) from the film with concurrent shift in the band edge to lower wavelengths. Here we have now employed mixed halide perovskites to uncover the influence of A-site cation (Methyl ammonium, MA and Cesium, Cs) on the mobility of iodide ions under photoirradiation. In the absence of solvent contact, the mixed halide perovskite films undergo photoinduced segregation with a rate constant that decreases with increasing Cs content. Interestingly, the iodide expulsion rate in DCM is strongly dependent on the rate of photoinduced segregation. At Cs atomic concentrations higher than 50%, the films become stable as the iodide expulsion is largely suppressed. The role of A-site cation in dictating the mobility of halide ions is discussed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Phase Segregation and Sequential Expulsion of Iodide and Bromide in Photoirradiated Ruddlesden–Popper 2D Perovskite Films

Two-dimensional (2D) Ruddlesden–Popper mixed-halide perovskite films, BA 2 PbBr 2 I 2 , undergo phase segregation when excited with visible light to generate bromide- and iodide-rich regions, as marked by absorption and emission changes. Upon stopping illumination, the process reverses, allowing original film compositions to be restored. However, if films are in contact with dichloromethane, light irradiation causes the sequential expulsion of iodide and bromide and introduces irreversible changes to the 2D films. The sequential disappearance of I– and Br– from pristine films (BA 2 Pb 2 Br 4 and BA 2 Pb 2 I 4 ) under photoirradiation, as observed from variances in expulsion rates, reflects differences in halide ion mobilities in these films. The photoinstability of 2D films raises questions about their use in stabilizing bulk, three-dimensional (3D) perovskite solar cells through 3D/2D interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Coloring Tetrahedral Semiconductors: Synthesis and Photoluminescence Enhancement of Ternary II-III 2 -VI 4 Colloidal Nanocrystals

Ternary tetrahedral II-III 2 -VI 4 semiconductors, where II is Zn or Cd, III In or Ga, and VI S, Se, or Te, are of interest in UV radiation detectors in medicine and space physics as well as CO 2 photoreduction under visible light. We synthesize colloidal II-III 2 -VI 4 semiconductor nanocrystals from readily available precursors and ascertain their ternary nature by structural and spectroscopic methods, including 77 Se solid-state NMR spectroscopy. The pyramidally shaped nanocrystals range between 2 and 12 nm and exhibit optical gaps of 2–3.9 eV. In the presence of excess anions on the particle surface, treatment with Lewis acidic, Z-type ligands results in better passivation and enhanced photoluminescence. Electronic structure calculations reveal the most stable, lowest energy polymorphs and coloring patterns. This work will pave the way toward more environmentally friendly, ternary semiconductors for optoelectronics and electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Low-Threshold Visible-to-Ultraviolet Solid-State Triplet-Fusion Upconversion

Visible-to-ultraviolet (UV) triplet-triplet annihilation (TTA) upconversion is an energy-relevant photon-management strategy that converts visible photons into UV photons capable of driving high-energy photochemical processes. Practical implementation requires solid-state thin films, which often require high excitation power. Here, we demonstrate the first solid-state visible-to-UV TTA upconversion thin-film device, using 1,4-bis((tricyclopentylsilyl)ethynyl)naphthalene (TCPS-NAP) as the annihilator and tris(2-phenylpyridine)iridium(III) (Ir(ppy) 3 ) as the sensitizer on silver. Under incoherent 455 nm excitation, the device exhibits blue-to-UV upconversion with a threshold of 4.8 mW/cm 2 . Using surface plasmons in the planar silver film, we achieve green-to-UV upconversion with a 1.11 eV anti-Stokes shift and 6.9 mW/cm 2 threshold, a 12.2 × threshold enhancement over far-field 532 nm excitation. In solution, TCPS-NAP shows excimer-dominated anti-Stokes emission rather than UV upconversion. These results establish a platform for harvesting low-intensity visible light to drive UV processes while demonstrating that solution-phase screening does not predict solid-state upconversion performance.

Luminescence↗
DOE OSTI2025

Nitroarene Photoactivation Promotes Oxidative Deconstruction of Olefinic Polymers

Photoactivation of nitroarenes has been recently reported to induce the transformation of alkenyl bonds into carbonyl functionalities. Capitalizing on this unique photochemical mechanism, this study explores the use of nitroarenes to achieve oxidative cleavage of olefinic polymers under visible light irradiation. The degradation of various olefinic polymers, including commercially available polybutadiene, polynorbornene, both linear and cyclic poly(phenylacetylene), as well as backbone-modified polyacrylates with alkenyl functionality was investigated. To elucidate the efficacy of this methodology, a series of nitroarene derivatives bearing variable substituents were screened for their degradative efficiency on polybutadiene. Varying nitroarene stoichiometry, reaction temperature, and pos-treaction workup conditions were investigated to optimize degradation conditions. Furthermore, the results demonstrated that photoexcited nitroarenes enable efficient oxidative degradation of olefinic polymers in a safe and sustainable manner, providing a novel strategy for mild macromolecular deconstruction.

Bond cleavage↗
DOE OSTI2024

Unraveling the Nature of Lasing Emission from Hybrid Silicon Nitride and Colloidal Nanocrystal Photonic Crystals with Low Refractive Index Contrast

Silicon nitride is used for its low optical loss and high thermal stability, making it a suitable platform for visible-light applications in integrated photonic devices. However, its application has been limited due to inefficient light emission, a problem addressed by integrating various types of light emitters onto the platform. In particular, the integration of solution-processable colloidal nanocrystals (NCs) as optical gain materials onto the silicon nitride platform is a promising route but requires a more solid theoretical footing. By leveraging 2D surface-emitting photonic crystal structures combined with NCs, we effectively confine and manipulate light to achieve lasing from green to red. Building on this, we model the light–matter interactions of the low index contrast NC/nitride platform, validated by extensive experimental validations through Fourier imaging techniques, revealing the full photonic band structure and showing clear mode congestion. Finally, these comprehensive studies confirm the potential of hybrid NC-based structures for fully integrated on-chip laser applications and indicate routes for further improvement.

BIC Lasing↗
DOE OSTI2020

Mesoporous 3D/2D NiCoP/g-C 3 N 4 Heterostructure with Dual Co–N and Ni–N Bonding States for Boosting Photocatalytic H 2 Production Activity and Stability

The mesoporous 3D/2D NiCoP/g-C 3 N 4 heterostructure is fabricated by embedding NiCoP nanoclusters on the surfaces of g-C 3 N 4 nanosheets, which exhibit more outstanding photocatalytic H 2 production activity than g-C 3 N 4 modified with Pt and other similar phosphides. The highest H 2 production rate over NiCoP/g-C 3 N 4 heterostructures reaches up to about 2.27 times than that of Pt/g-C 3 N 4 under visible light, and meanwhile, the NiCoP/g-C 3 N 4 heterostructure can maintain a continuously stable H 2 production rate during long cyclic running of 15 times in a total of 60 h. Here, the structure and properties investigations reveal that the splendid H 2 production activity and stability derive from the formed dual Co–N and Ni–N bonding states between 3D NiCoP nanoclusters and 2D g-C 3 N 4 nanosheets that can efficiently facilitate the transfer and separation of charge carriers and improve the interaction at heterointerfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Metal Ion Control of Photoinduced Electron Spin Polarization in Electronic Ground States

The sign and intensity of photoinduced electron spin polarization (ESP) in the electronic ground doublet states ( 2 S o /D o ) of chromophore-radical complexes can be controlled by changing the nature of the metal ion. The complexes consist of an organic radical (nitronylnitroxide, NN) covalently attached to a donor acceptor chromophore via a meta-phenylene bridge, (bpy)M(CAT-m-Ph-NN) (1) (bpy = 4,4’-di-tert-butyl-2,2’-bipyridine, M = Pd II (1-Pd) or Pt II (1-Pt), CAT = 3-tert-butylcatecholate, m-Ph = meta-phenylene). In both complexes, photoexcitation with visible light pro-duces an initial exchange-coupled, 3-spin (bpy •- , CAT +• = semiquinone (SQ) and NN • ), charge-separated doublet 2 S 1 (S = chromophore excited spin singlet configuration) excited state that rapidly decays to the ground state via a 2 T 1 (T = chromophore excited spin triplet configuration) state. This process is not expected to be spin selective and only very weak emissive ESP is found for 1-Pd. In contrast, strong absorptive ESP is generated in 1-Pt. Furthermore, it is postulated that zero-field splitting induced transitions between the chromophoric 2 T 1 and 4 T 1 states (1-Pd and 1-Pt) and spin-orbit induced transitions between 2 T 1 and NN-based quartet states (1-Pt) ac-count for the differences in polarization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reversible Methanolation of Metal Halide Perovskites

The low formation energies inherent in metal halide perovskites enable the structure to be easily broken and remade with little energy input. In this work, we leverage low formation energy to demonstrate 0D/3D structural transformations induced by reversible intercalation of methanol to yield dramatic control of visible light absorption. We identify a methanolated structure that features sheets of 0D isolated [PbI6]4- octahedra separated by MAI and methanol. Methanol and water reversibly displace each other in the 0D complex by controlling the chemical potential of the system via Le Chatelier's principle. The weaker H-bonding of methanol compared to water effectively reduces the complex dissociation temperature from 70 to 50 degrees C, rendering the methanol complex more desirable for an array of next-generation applications spanning low-power-consumption memory to switchable photovoltaics.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Photocatalytic Aqueous CO 2 Reduction to CO and CH 4 Sensitized by Ullazine Supramolecular Polymers

There has been rapid progress on the chemistry of supramolecular scaffolds that harness sunlight for aqueous photocatalytic production of hydrogen. However, great efforts are still needed to develop similar photosynthetic systems for the great challenge of CO 2 reduction especially if they avoid the use of nonabundant metals. This work investigates the synthesis of supramolecular polymers capable of sensitizing catalysts that require more negative potentials than proton reduction. The monomers are chromophore amphiphiles based on a diareno-fused ullazine core that undergo supramolecular polymerization in water to create entangled nanoscale fibers. Under 450 nm visible light these fibers sensitize a dinuclear cobalt catalyst for CO 2 photoreduction to generate carbon monoxide and methane using a sacrificial electron donor. The supramolecular photocatalytic system can generate amounts of CH 4 comparable to those obtained with a precious metal-based [Ru(phen) 3 ](PF 6 ) 2 sensitizer and, in contrast to Ru-based catalysts, retains photocatalytic activity in all aqueous media over 6 days. Furthermore, the present study demonstrates the potential of tailored supramolecular polymers as renewable energy and sustainability materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Photocatalytic Biocidal Coatings Featuring Zr 6 Ti 4 -Based Metal–Organic Frameworks

The world is currently suffering socially, economically, and politically from the recent pandemic outbreak due to the Coronavirus Disease 2019 (COVID-19), and those in hospitals, schools, and elderly nursing homes face enhanced threats. Healthcare textiles, such as masks and medical staff gowns, are susceptible to contamination of various pathogenic microorganisms, including bacteria and viruses. Here, metal–organic frameworks (MOFs) can potentially address these challenges due to their tunable reactivity and ability to be incorporated as porous coatings on textile materials. Here, we report how incorporating titanium into the zirconium-pyrene-based MOF NU-1000, denoted as NU-1012, generates a highly reactive biocidal photocatalyst. This MOF features a rare ligand migration phenomenon, and both the Ti/Zr center and the pyrene linker act synergistically as dual active centers and widen the absorption band for this material that results in enhanced reactive oxygen species (ROS) generation upon visible light irradiation. Additionally, we found the ligand migration process is generally applicable to other csq topology Zr-MOFs. Importantly, NU-1012 can be easily incorporated onto cotton textile cloths as a coating, and the resulting composite material demonstrates fast and potent biocidal activity against Gram-negative bacteria (E. coli), Gram-positive bacteria (S. epidermidis), and T7 bacteriophage virus with up to a 7-log (99.99999%) reduction within one hour under simulated daylight.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reorganization Energies for Interfacial Proton-Coupled Electron Transfer to a Water Oxidation Catalyst

The reorganization energy (λ) for interfacial electron transfer (ET) and proton-coupled electron transfer (PCET) from a conductive metal oxide (In 2 O 3 :Sn, ITO) to a surface-bound water oxidation catalyst were extracted from kinetic data measured as a function of the thermodynamic driving force. Visible light excitation resulted in rapid excited-state injection (k inj > 10 8 s -1 ) to the ITO, which photo-initiated the two interfacial reactions of interest. The rate constants for both reactions increased with the driving force, −ΔG°, to a saturating limit, k max , with rate constants consistently larger for ET than for PCET. Marcus-Gerischer analysis of the kinetic data provided the reorganization energy for interfacial PCET (0.90 ± 0.02 eV) and ET (0.40 ± 0.02 eV), respectively. The magnitude of k max for PCET was found to decrease with pH, behavior that was absent for ET. Both the decrease in k max and the larger reorganization energy for an unwanted competing PCET reaction from the ITO to the oxidized catalyst showcases a significant kinetic advantage for driving solar water oxidation at high pH. Computational analysis revealed a larger inner-sphere reorganization energy contribution for PCET than for ET arising from a more significant change in the Ru–O bond length for PCET. Extending Marcus-Gerischer theory to PCET by including the excited electron-proton vibronic states and the proton donor-acceptor motion provided an apparent reorganization energy of 1.01 eV. Furthermore, this study demonstrates that the Marcus-Gerischer theory initially developed for ET can be reliably extended to PCET for quantifying and interpreting reorganization energies observed experimentally.

Catalysts Kinetic parameters↗
DOE OSTI2023

BiVO 4 –Liquid Junction Photovoltaic Cell with 0.2% Solar Energy Conversion Efficiency

BiVO 4 is an important photoanode material for water oxidation, but its photoelectrochemistry regarding the triiodide/iodide redox couple is not well understood. Here, we use a combination of open circuit potential measurements, photoelectrochemical scans, and liquid surface photovoltage spectroscopy (SPS) to confirm that BiVO 4 /triiodide/iodide electrolyte contacts produce up to 0.55 V photovoltage under 23 mW/cm –2 illumination from a 470 nm LED. Inspired by these results, we construct FTO/BiVO 4 /KI(I 2 ) aq /Pt sandwich photoelectrochemical cells from electrochemically grown 0.5 × 0.5 cm 2 BiVO 4 and Mo-doped BiVO 4 films. Under AM 1.5 illumination, the devices have up to 0.22% energy conversion efficiency, 0.32 V photovoltage, and 1.8 mA cm –2 photocurrent. Based on SPS, hole transfer to iodide is sufficiently fast to prevent the competing water oxidation reaction. Mo doping increases the incident photon-to-current efficiency to up to 55% (at 425 nm under front illumination) by improving the BiVO 4 conductivity, but this comes at the expense of a lower photovoltage resulting from recombination at the Mo defects and a detrimental Schottky junction at the interface with FTO. Additional photovoltage losses are caused by the offset between the BiVO 4 valence band edge and the triiodide/iodide electrochemical potential and by electron back transfer to iodide at the FTO back contact (shunting). Overall, this work provides the first example of a BiVO 4 –liquid photovoltaic cell and an analysis of its limitations. Finally, even though the larger band gaps of metal oxides constrain their solar energy conversion efficiency, their transparency to visible light and deep valence bands makes them suitable for tandem photovoltaic devices.

14 SOLAR ENERGY↗
DOE OSTI2024

Direct Evidence for a Sequential Electron Transfer–Proton Transfer Mechanism in the PCET Reduction of a Metal Hydroxide Catalyst

Here, the proton-coupled electron transfer (PCET) mechanism for the reaction M ox -OH + e − + H + → M red -OH 2 was de-termined through kinetic resolution of the independent electron transfer (ET) and proton transfer (PT) steps. The reaction of interest was triggered by visible light excitation of [Ru II (tpy)(bpy′)H 2 O] 2+ , Ru II -OH 2 , where tpy is 2,2′:6′,2″-terpyridine and bpy′ is 4,4′-diaminopropylsilatrane-2,2′-bipyridine, anchored to In 2 O 3 :Sn (ITO) thin films in aqueous solutions. Interfacial kinetics for the PCET reduction reaction were quantified by nanosecond transient absorption spectroscopy as a function of solution pH and applied potential. Data acquired from pH = 5-10 revealed a stepwise electron-transfer proton-transfer (ET-PT) mechanism, while kinetic measurements made below the pK a (Ru III -OH/OH 2 ) = 1.3 were used to study the analogous interfacial reaction where electron transfer was the only mechanistic step. Analysis of this data with a recently reported multi-channel kinetic model was used to construct a PCET zone diagram and supported the assignment of an ET-PT mechanism from pH = 5-10. Ultimately, this study represents a unique example amongst M ox -OH/M red -OH 2 reactivity where the protona-tion and oxidation state of the intermediate was kinetically and spectrally resolved to firmly establish the PCET mechanism.

Charge transfer↗
DOE OSTI2024

Characterization of Deformational Isomerization Potential and Interconversion Dynamics with Ultrafast X-ray Solution Scattering

Dimeric complexes composed of d 8 square planar metal centers and rigid bridging ligands provide model systems to understand the interplay between attractive dispersion forces and steric strain in order to assist the development of reliable methods to model metal dimer complexes more broadly. [Ir 2 (dimen) 4 ] 2+ (dimen = para-diisocyanomenthane) presents a unique case study for such phenomena, as distortions of the optimal structure of a ligand with limited conformational flexibility counteract the attractive dispersive forces from the metal and ligand to yield a complex with two ground state deformational isomers. Here, in this work, we use ultrafast X-ray solution scattering (XSS) and optical transient absorption spectroscopy (OTAS) to reveal the nature of the equilibrium distribution and the exchange rate between the deformational isomers. The two ground state isomers have spectrally distinct electronic excitations that enable the selective excitation of one isomer or the other using a femtosecond duration pulse of visible light. We then track the dynamics of the nonequilibrium depletion of the electronic ground state population—often termed the ground state hole—with ultrafast XSS and OTAS, revealing a restoration of the ground state equilibrium in 2.3 ps. This combined experimental and theoretical study provides a critical test of various density functional approximations in the description of bridged d 8 –d 8 metal complexes. The results show that density functional theory calculations can reproduce the primary experimental observations if dispersion interactions are added, and a hybrid functional, which includes exact exchange, is used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Photodriven Ammonia Synthesis from Manganese Nitrides: Photophysics and Mechanistic Investigations

Ammonia synthesis from N,N,O,O-supported manganese(V) nitrides and 9,10-dihydroacridine using proton-coupled electron transfer and visible light irradiation in the absence of precious metal photocatalysts is described. While the reactivity of the nitride correlated with increased absorption of blue light, excited-state lifetimes determined by transient absorption were on the order of picoseconds. Furthermore, this eliminated excited-state manganese nitrides as responsible for bimolecular N–H bond formation. Spectroscopic measurements on the hydrogen source, dihydroacridine, demonstrated that photooxidation of 9,10-dihydroacridine was necessary for productive ammonia synthesis. Transient absorption and pulse radiolysis data for dihydroacridine provided evidence for the presence of intermediates with weak E–H bonds, including the dihydroacridinium radical cation and both isomers of the monohydroacridine radical, but notably these intermediates were unreactive toward hydrogen atom transfer and net N–H bond formation. Additional optimization of the reaction conditions using higher photon flux resulted in higher rates of the ammonia production from the manganese(V) nitrides due to increased activation of the dihydroacridine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Photodriven Ammonia Synthesis from N 2 and H 2 : Recycling of a Molecular Molybdenum Nitride

Here, the synthesis of ammonia from its elements, N 2 and H 2 , is the most atom-economical and thermodynamically preferred route but presents a high kinetic barrier and thus is rare using molecular compounds. Irradiation of a molecular molybdenum nitride prepared from N 2 cleavage with visible light in the presence of an iridium photocatalyst and 1–4 atm of H 2 produced high yields of ammonia along with the formation of a cationic, formally molybdenum(VI) pentahydride as the major molybdenum-containing product. Continued irradiation of the molybdenum hydride under an N 2 atmosphere resulted in regeneration of the molybdenum nitride that was recycled and used for additional hydrogenation to generate more ammonia, demonstrating superstoichiometric batch ammonia synthesis using only N 2 and H 2 with molecular compounds under ambient conditions.

Hydrogenation↗