Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vinyl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Proton selective membranes based on two dimensional materials

Proton conductive membrane includes a proton selective layer of 80-100% carbon with sp2 hybridization having a thickness of 0.3-100 nm, with 0-20% of hydrogen, oxygen, nitrogen and sp3 carbon; wherein the sp2 carbon is in a form of graphene-like material; the proton selective layer having a plurality of pores formed by any of 7, 8, 9 or 10 sp2 carbon cycles or a combination thereof, with the pores having an effective diameter of up to 0.6 nm; an ionomeric polymer layer on the proton selective layer. Total thickness of the proton conductive membrane is less than 50 microns. The ionomeric polymer is PFSA (perfluorinated sulfonic acid), PVP (polyvinylpyrrolidone) or PVA (poly vinyl alcohol) with iodide or bromide counterion dissolved inside. The graphene-like material is CVD graphene or reduced graphene oxide (rGO). A D to G Raman band ratio of the membrane is more than 0.1.

Smirnov, Sergei↗
DOE OSTI2022

Evaluation of Bifacial Modules and PV Technologies with Combined-Accelerated Stress Testing

In view of the increasing interest and market share of bifacial cells and modules, suitable substrates such as glass and transparent backsheets along with ethylene vinyl acetate (EVA) and polyolefin elastomer (POE) encapsulants were examined in combined-accelerated stress testing (C-AST) to evaluate and compare degradation modes. Testing with both monofacial and bifacial cells, we found glass-glass modules with monofacial cells led to greater grid finger breakage than those with polymeric backsheets. This is attributed to previous x-ray topography work showing higher stress in cells in glass-glass modules than glass backsheet modules. Consistent with the objectives of C-AST, which stresses modules at levels corresponding to the limits seen in the natural environment, we observed the UV-fluorescence signatures of modules tested in C-AST (considering the degradation associated with developing chromophores, moisture penetration and photobleaching effects) to be like those in fielded modules, more so than other chamber stress testing implemented for comparison. Finally, among multiple cell degradation modes that we observed such as light-induced degradation (LID), we differentiated susceptibility to potential-induced degradation (PID) on the back of the bifacial Passivated Emitter Back Cells (PERC) in C-AST. Confirming with ex-situ tests, we found polarization-type PID most prevalent in glass/glass modules with EVA as would be anticipated considering the greater leakage current through such module encapsulation. Unlike PID tests performed in the dark, which can lead to false positive PID test results, field-representative illumination is experienced by the modules on the front and back side while -1200 V system voltage is applied in C-AST, supporting the conclusion that this module type would be susceptible to PID in the field.

bifacial modules↗
DOE OSTI2022

Case Studies of Residential Façade Upgrades in Four Climate Zones

This paper reports on a project that explored the viability of insulation and window upgrades during siding retrofits in four case studies across the United States. Thousands of homes are re-sided every year, but only a fraction of consumers add insulation and upgrade the windows at the same time, even though a siding replacement is the ideal time to update the thermal performance of building enclosures. To better understand why more siding retrofits do not include insulation and window upgrades, research staff from several organizations collaborated with the U.S. Department of Energy on a multi-faceted research project that included a cost analysis, workforce analysis, market assessment, and contractor assessment. This paper will review four in-field case studies conducted with contractors actively engaged in home re-siding projects that agreed to add rigid insulation and window upgrades as part of their projects. Findings from the case studies will be presented including contractor perspectives, cost, and technical approaches on projects, located in multiple climate zones including Bellingham WA, Jackson MS, Kalamazoo MI, and Phoenix AZ. All projects involved adding continuous rigid insulation on the exterior walls and installation of new cladding. Cladding types varied from wood and metal to fiber cement, vinyl, and traditional stucco. All homes also received a window upgrade, although upgrades varied depending on the original condition of the windows and climate; upgrades included triple-pane windows, low-e storm windows, and exterior shading. Key findings including technical approaches, opportunities, barriers, and project cost will be presented.

re-siding, insulation, rigid insulation, exterior ↗
DOE OSTI2023

Evaluation of Surface Crack Formation in Photovoltaic Backsheets Using Fragmentation and Finite Element Simulations: Preprint

Backsheet cracking is among the most commonly observed degradation modes of photovoltaic (PV) modules in the field. Cracks can reduce the ability of backsheets to fulfil their functions, for example, protection of the modules from the environment or electrical insulation. This work presents an evaluation of the degradation and cracking propensity of two backsheets during accelerated IEC TS 62788-7-2 A3 (International Electrotechnical Commission) aging with the fragmentation test: a co-extruded polyamide backsheet (AAA), and a laminated multilayer backsheet with a polyethylene terephthalate core and outer layer and ethylene vinyl acetate inner layer (PPE). Results show the surface embrittlement of the AAA outer layer during exposure. A longer time of exposure causes cracks to form at lower strains during stretching and creates deeper cracks. Accordingly, Young's modulus of the outer layer increases, as measured by cross-sectional nanoindentation. PPE exhibits cracking after exposure as well. While no similar increase of modulus or crack depth can be observed, the outer layer of PPE exhibits more obvious signs of erosion during exposure, including progressive morphological changes and thickness losses. A finite element model to simulate surface crack formation is devised, based on initially zero-thickness decohesion elements. Decohesion criteria define a critical stress, at which these elements grow, and cracks can begin to form. These criteria are obtained via parameter optimization by comparison between simulation and experiment. The model is used to interpret crack formation in both backsheets.

backsheet↗
DOE OSTI2023

Polynorbornene-based polycations

A statistical, cationic-functionalized norbornene copolymer is formed by a process including performing a vinyl addition polymerization in the presence of a metal catalyst of a first norbornene monomer substituted with a first alkyl group and at least a second norbornene monomer substituted with a second alkyl group, to form an intermediate norbornene copolymer. The second alkyl group includes a substituent which undergoes a substitution reaction with a precursor of a cationic group. The process further includes adding the precursor for the cationic group to the intermediate norbornene copolymer to form the cationic functionalized norbornene copolymer. The cationic group has a volume of 0.25 cm 3 /mol or greater (for example, a phosphonium group or an imidazolium group).

Noonan, Kevin↗
DOE OSTI2023

Membranes for gas separation

Membranes, methods of making the membranes, and methods of using the membranes are described herein. The membranes can comprise a support layer, and a selective polymer layer disposed on the support layer. The selective polymer layer can comprise a selective polymer matrix and carbon nanotubes dispersed within the selective polymer matrix. The carbon nanotubes can comprise multi-walled carbon nanotubes wrapped in a hydrophilic polymer, such as polyvinylpyrrolidone or a copolymer thereof, such as poly(1-vinylpyrrolidone-co-vinyl acetate). The membranes can exhibit selective permeability to gases. As such, the membranes can be for the selective removal of carbon dioxide and/or hydrogen sulfide from hydrogen and/or nitrogen.

Ho, W. S. Winston↗
DOE OSTI2023

Method of manufacturing proton selective membranes based on two dimensional materials

Proton conductive membrane includes a proton selective layer of 80-100% carbon with sp2 hybridization having a thickness of 0.3-100 nm, with 0-20% of hydrogen, oxygen, nitrogen and sp3 carbon; wherein the sp2 carbon is in a form of graphene-like material; the proton selective layer having a plurality of pores formed by any of 7, 8, 9 or 10 sp2 carbon cycles or a combination thereof, with the pores having an effective diameter of up to 0.6 nm; an ionomeric polymer layer on the proton selective layer. Total thickness of the proton conductive membrane is less than 50 microns. The ionomeric polymer is PFSA (perfluorinated sulfonic acid), PVP (polyvinylpyrrolidone) or PVA (poly vinyl alcohol) with iodide or bromide counterion dissolved inside. The graphene-like material is CVD graphene or reduced graphene oxide (rGO). A D to G Raman band ratio of the membrane is more than 0.1.

Smirnov, Sergei↗
DOE OSTI2024

Determining the Crosslinking and Degradation Reaction Kinetics in Photovoltaic Encapsulants Using Accelerated Aging: Preprint

Degradation of photovoltaic (PV) module encapsulant mechanical characteristics that lead to embrittlement and delamination remains a cause of failure in solar installations. A multiscale reliability model based on detailed molecular degradation reaction kinetics was previously published, connecting the encapsulant mechanical properties (elastic modulus, yield strength, and adhesion energy) to the degraded molecular structure and interfacial bond density to adjacent solar cell and glass substrates. The model, developed primarily for poly(ethylene-co-vinyl acetate) (EVA) encapsulants, remains to be experimentally validated. Determining the degradation and crosslinking kinetics of alternative encapsulants, such as polyolefin elastomer (POE) and EVA/POE/EVA composites (EPE), can further generalize the model. Importantly, the activation energy for crosslinking of fully cured PV encapsulant products from temperature or UV is presently unknown or unavailable. In this work, we subject EVA, POE, and EPE encapsulants to a set of accelerated aging conditions, varying the temperature, UV intensity, and relative humidity. We use DSC, FTIR, and Soxhlet extraction (gel content) to characterize the encapsulants' changing molecular structure. This allows for determination of the photochemical degradation and crosslinking kinetics of the encapsulants. Preliminary results show an increase in gel content (crosslinking) and a decrease in crystallinity of EVA, POE, and EPE encapsulants under hot-aerobic (90 deg C, 22% RH) and hot-anaerobic (90oC, sealed in N2 air) accelerated aging, even in the absence of UV and crosslinking initiating agents. For a least squares regression with an assumed first-order crosslinking kinetics, the crosslinking rate parameters were computed for the three encapsulants under hot-aerobic and hot-anaerobic aging conditions. FTIR analysis showed insignificant encapsulant degradation for hot-aerobic and hot-anaerobic aging, demonstrating the critical role of UV and moisture in accelerating degradation. Aging conditions with UV exposure and elevated humidity are presently in progress.

adhesion↗
DOE OSTI2024

Polymers depolymerizable by metathesis of a cleavable unit

Novel polymers are depolymerizable by metathesis of a cleavable unit. As an example, a series of linear and crosslinked polyurethanes were prepared that can be selectively depolymerized under mild conditions. Two unique polyols were synthesized bearing unsaturated units in a configuration designed to favor ring-closing metathesis to five- and six-membered cycloalkenes. These polyols were co-polymerized with toluene diisocyanate to generate linear polyurethanes and trifunctional hexamethylene- and diphenylmethane-based isocyanates to generate crosslinked polyurethanes. The polyol design is such that the ring-closing metathesis reaction cleaves the backbone of the polymer chain. Upon exposure to dilute solutions of Grubbs' catalyst under ambient conditions, the polyurethanes were rapidly depolymerized to low molecular weight, soluble products bearing vinyl and cycloalkene functionalities. These functionalities enabled further re-polymerization by traditional strategies for polymerization of double bonds. This general approach can be expanded to develop a range of chemically recyclable condensation polymers that are readily depolymerized by orthogonal metathesis chemistry.

Jones, Brad Howard↗
DOE OSTI2020

On the nature of macroradicals formed upon radiolysis of aqueous poly(N-vinylpyrrolidone) solutions

Herein we have explored the nature of macroradicals formed upon radiolysis of aqueous poly(N-vinylpyrrolidone) (PVP) solutions using pulse radiolysis, density functional theory (DFT) and literature data. On the basis of literature data on site-specific kinetics of hydrogen abstraction from simple amides and spectra corresponding to specific radical sites on the same amides we have assessed the distribution of H-atom abstraction by • OH radicals from different positions on the pyrrolidone ring and the polymer backbone. Pulse radiolysis experiments performed at different doses per pulse and different PVP concentrations demonstrate that the H-abstracting radiolysis products are not quantitatively scavenged by the polymer when the dose per pulse exceeds ≈40 Gy. The implications of this are discussed in the context of radical-initiated crosslinking reactions. At a mass fraction of 0.1% PVP and doses per pulse ranging from 7 Gy to 117 Gy, the overall radical decay observed at 390 nm follows second order kinetics with rate constants on the order of 10 9 dm 3 mol -1 s -1 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Sandwiched Kagomé Lattices in a Coordination Polymer Based on Mixed-Valent Uranium

The metal–organic material U V O(U VI O 2 ) 2 (OH) 5 (Triaz) 2 (Triaz = 1,2,4-triazolate) has been isolated from the reaction of UO 2 (NO 3 ) 2 ·6H 2 O with 1,2,4-triazole in the ionic liquid 1-ethyl-3-methylimidazolium acetate ([C 2 mim][OAc]). The compound’s crystal structure is comprised of planar inorganic layers interconnected by organic linkers into a 3D framework. These layers represent a uranium-based coordination polymer with a Kagomé topology that to the best of our knowledge has never been recognized in f-element coordination chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enthalpy of Uranium Adsorption onto Hematite

The influence of temperature on the adsorption of metal-ions at the solid-water interface is often overlooked, despite the important role that adsorption plays in metal ion fate and transport in the natural environment where temperatures vary widely. Herein, we examine the temperature-dependent adsorption of uranium, a widespread radioactive contaminant, onto the ubiquitous iron oxide, hematite. The multi-temperature batch adsorption data and surface complexation models indicate that adsorption of uranium, as the hexavalent uranyl (UO 2 2+ ) ion, increases significantly with increasing temperature, with an adsorption enthalpy (ΔH ads ) of +71 kJ mol –1 . We suggest that this endothermic, entropically-driven adsorption behavior is linked to reorganization of the uranyl-ion-hydration and interfacial water structures upon U VI adsorption at the hematite surface. Altogether, this work provides fundamental insight into the thermodynamics driving metal-ion adsorption reactions and provides the specific enthalpy value necessary for improved predictive geochemical modeling of U VI adsorption in the environment.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Short-Range Order in VI 3

We present a detailed investigation of the crystal structure of VI 3 , a two-dimensional van der Waals material of interest for studies of low-dimensional magnetism. As opposed to the average crystal structure that features $R\bar{3}$ symmetry of the unit cell, our Raman scattering and X-ray atomic pair distribution function analysis supported by density functional theory calculations point to the coexistence of short-range ordered $P\bar{3}$1c and long-range ordered $R\bar{3}$phases. The highest-intensity peak, A 1g 3 , exhibits a moderate asymmetry that might be traced back to the spin–phonon interactions, as in the case of CrI 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Controlling the Reduction of Chelated Uranyl to Stable Tetravalent Uranium Coordination Complexes in Aqueous Solution

The solution-state interactions between octadentate hydroxypyridinone (HOPO) and catecholamide (CAM) chelating ligands and uranium were investigated and characterized by UV-visible spectrophotometry and X-ray absorption spectroscopy (XAS), as well as electrochemically via spectroelectrochemistry (SEC) and cyclic voltammetry (CV) measurements. Depending on the selected chelator, we demonstrate the controlled ability to bind and stabilize U IV , generating with 3,4,3-LI(1,2-HOPO), a tetravalent uranium complex that is practically inert toward oxidation or hydrolysis in acidic, aqueous solution. At physiological pH values, we are also able to bind and stabilize U IV to a lesser extent, as evidenced by the mix of U IV and U VI complexes observed via XAS. Finally, CV and SEC measurements confirmed that the U IV complex formed with 3,4,3-LI(1,2-HOPO) is redox inert in acidic media, and U VI ions can be reduced, likely proceeding via a two-electron reduction process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗