Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “trench”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Noritic fragments in the Apollo 14 and 12 soils and the origin of Oceanus Procellarum.

Fragments of noritic breccias having a range of recrystallization textures and noritic basalts comprise about 80% of the 1 to 2 mm soil samples from Cone Crater (14142) and the bottom of the trench (14151). In five other samples, noritic fragments range in abundance from 42 to 56%. The remaining particles in each case are glasses, soil breccias, and glass-bonded aggregates; other crystalline rock types such as anorthosites constitute less than 1% of the soil. Noritic materials - i.e., Apollo 12 and 14 norites and ropy (KREEP) glass particles, can be divided into two broad groups on a chemical basis. The particles in one group have relatively high bulk TiO2 contents and high Fe/(Fe + Mg) ratios in their normative pyroxenes; the ropy glasses from Apollo 12 and 14 and a few Apollo 12 noritic rock fragments are in this category. Particles in the other class contain pyroxenes with a lower Fe/(Fe + Mg) and have a range of TiO2 contents; most noritic rock fragments from Apollo 12 and 14 are in this group. The ropy glasses may be from Copernicus or other rayed craters, but almost all the norites derive from the Fra Mauro formation or other noritic occurrences associated with Oceanus Procellarum.

Taylor, G. J.↗
NASA NTRS1972

Noble gas studies on regolith materials from Apollo 14 and 15.

Abundances and isotopic compositions of the five stable noble gases, He, Ne, Ar, Kr, and Xe in soils and breccia were determined. The samples investigated included material from a range of depths in a trench and a core tube. Noble gas determinations were performed in a 6-inch all-metal mass spectrometer of high sensitivity. The grain size separates and stepwise heating experimental methods used give results that supplement each other. Calculated concentrations of spallation Xe-126 in many of the fines and gas-rich breccia are presented in a table. Bulk soil samples obtained by Apollo 14 show an inverse correlation of spallation Xe-126 with grain size.

Bogard, D. D.↗
NASA NTRS1973

Major element chemistry of glasses in Apollo 14 soil 14156.

Glasses in a soil sample (14156) from the middle layer of the trench at the Fra Mauro landing site show a wide range of compositions clustered around certain preferred compositions. Ninety per cent of the glasses are of two major types - Fra Mauro basalt (63%) with high K and 17 wt % Al2O3 and Highland basalt or anorthositic gabbro (27%) with low K and 25 to 26 wt % Al2O3. The glass population is almost identical with that of the comprehensive soil 14259.

Reid, A. M.↗
NASA NTRS1973

Exhaust cloud rise and growth for Apollo Saturn engines.

Empirical and analytical results have been reduced from time-lapse photographs of exhaust clouds during the launch of Apollo 10, 14, 15, and 16 from the Kennedy Space Center. Theoretical predictions of the buoyant cloud rise and growth compare very favorably to actual measurements. The mathematical model predicts with engineering accuracy the terminal altitude and size of the clouds. A principal input to MSFC's multilayer diffusion model is top height of the exhaust cloud. It is this characteristic dimension that is the main subject of this report. An interesting occurrence during launch is the formation of bimodal exhaust cloud which is due to the north-south oriented flame trench directly beneath the base of the vehicle. This study has added considerable information on engine exhaust cloud rise and growth which is essential to the study of atmospheric dispersal in time and space.

Susko, M.↗
NASA NTRS1973

Evolution of the earth's crust: Evidence from comparative planetology

Geochemical data and orbital photography from Apollo, Mariner, and Venera missions were combined with terrestrial geologic evidence to study the problem of why the earth has two contrasting types of crust (oceanic and continental). The following outline of terrestrial crustal evolution is proposed. A global crust of intermediate to acidic composition, high in aluminum, was formed by igneous processes early in the earth's history; portions survive in some shield areas as granitic and anorthositic gneisses. This crust was fractured by major impacts and tectonic processes, followed by basaltic eruptions analogous to the lunar maria and the smooth plains of the north hemisphere of Mars. Seafloor spreading and subduction ensued, during which portions of the early continental crust and sediments derived therefrom were thrust under the remaining continental crust. The process is exemplified today in regions such as the Andes/Peru-Chile trench system. Underplating may have been roughly concentric, and the higher radioactive element content of the underplated sialic material could thus eventually cause concentric zones of regional metamorphism and magmatism.

Lowman, P. D., Jr.↗
NASA NTRS1973

Evaluations of lunar samples for the presence of viable organisms

Samples from the six successful Apollo lunar exploration missions were examined for the presence of biological formed elements and were used to inoculate a variety of culture media designed to promote growth of a broad spectrum of microorganisms. No evidence of viable organisms was obtained from any of these analyses. Following incubation of the lunar material-culture medium complexes, microbial growth dynamics studies were conducted with known test species to evaluate the possible presence of toxic factors. Only extracts of culture media which had been in contact with a mixture of lunar material from both Apollo 11 core tubes proved to be toxic to all species tested. Attempts to reproduce this toxic effect with individual Apollo 11 core samples obtained at other parts of the core and analyzed under somewhat different conditions were unsuccessful. In all, 48 different lunar samples were examined. These samples were collected at the lunar surface, in trenches, and in core samples to a depth of 297 cm.

Taylor, G. R.↗
NASA NTRS1974

Relation between surface slip topography and stress corrosion cracking in Ti-8 wt % Al

The deformation behavior of Ti-8 wt % Al has been investigated in an inert environment (air), and an aggressive environment (salt water). Details of surface slip geometry were examined by high resolution surface replicas at various stages of deformation in both environments. Specimens aged to contain a fine dispersion of Ti3Al precipitates failed by subcritical crack growth in salt water, whereas specimens in the single phase condition showed no effects of environment on the yield or fracture characteristics. The Ti3Al precipitates produce little change in strength level or slip character compared to the single phase alloy, and there is no evidence of any effects of environment on the character of surface slip. Rather, the presence of trenches along slip bands on the surface of aged specimens suggest that the specific effect of the Ti3Al precipitates is to render the surface slip steps chemically active relative to the surrounding matrix by slip induced dissolution of the particles.

Boyd, J. D.↗
NASA NTRS1975

Earth and ocean physics

A procedure for obtaining a parameterization of the marine geoid for suitable orthogonality properties in altimetry data is discussed. The application of the technique to the Puerto Rico trench is explained and a map of the data is developed. The Goddard Earth Model (GEM-6) is described to show the method for determining the earth gravity field using data obtained from satellite tracking stations. The derivation of a global ocean tide model from satellite data is explained. The influence of solid earth and ocean tides on the inclination of GEOS-1 is plotted. The delineation of the geographical fracture pattern and boundary system of the tectonic plates using ERTS satellite is shown.

Source record↗
NASA NTRS1975

Calibration and evaluation of Skylab altimetry for geodetic determination of the geoid

The author has identified the following significant results. The Skylab altimeter experiment has proven the capability of the altimeter for measurement of sea surface topography. The geometric determination of the geoid/mean sea level from satellite altimetry is a new approach having significant applications in many disciplines including geodesy and oceanography. A generalized least squares collocation technique was developed for determination of the geoid from altimetry data. The technique solves for the altimetry geoid and determines one bias term for the combined effect of sea state, orbit, tides, geoid, and instrument error using sparse ground truth data. The influence of errors in orbit and a priori geoid values are discussed. Although the Skylab altimeter instrument accuracy is about plus or minus 1m, significant results were obtained in identification of large geoidal features such as over the Puerto Rico trench. Comparison of the results of several passes shows that good agreement exists between the general slopes of the altimeter geoid and the ground truth, and that the altimeter appears to be capable of providing more details than are now available with best known geoids.

Mourad, A. G.↗
NASA NTRS1975

Catalogue of geoidal variations for simple seafloor topographic features

A catalogue is presented of theoretical geoidal variations for three types of structural features common to the earth's surface: seamounts, submarine ridges, and submarine trenches. These structures were simulated by simple geometric shapes modeled in three-dimensions. A computer program calculated the potential and gravitational variations over the models. Profile plots of geoidal variations and free-air gravity anomalies are presented over cross-sections of the structures. A ready reference information set is provided for comparison with satellite altimeter data for ocean areas.

Bowin, C.↗
NASA NTRS1974

A model of convergent plate margins based on the recent tectonics of Shikoku, Japan

A viscoelastic finite element plate tectonic model is applied to displacement data for the island of Shikoku, Japan. The flow properties and geometry of the upper portions of the earth are assumed known from geophysical evidence, and the loading characteristics are determined from the model. The nature of the forces acting on the Philippine Sea plate, particularly in the vicinity of the Nankai trough, is determined. Seismic displacement data related to the 1946 Nankaido earthquake are modeled in terms of a thick elastic plate overlying a fluidlike substratum. The sequence of preseismic and seismic displacements can be explained in terms of two independent processes operating on elastic lithospheric plates: a strain accumulation process caused by vertical downward forces acting on or within the lithosphere in the vicinity of the trench, and a strain release process caused by plate failure along a preexisting zone on weakness. This is a restatement of Reid's elastic rebound theory in terms of elastic lithospheric plates.

Bischke, R. E.↗
NASA NTRS1974

Skylab radar altimeter - Short-wavelength perturbations detected in ocean surface profiles

Short-wavelength anomalies in sea surface topography, caused by the gravitational effects of major ocean bottom topographic features, have been detected by the radar altimeter aboard Skylab. Some features, such as deep ocean trenches, seamounts, and escarpments, displace the ocean surface by as much as 15 meters over 100-kilometer wavelengths. This experiment demonstrates the potential of satellite altimetry for determining the ocean geoid and for mapping major features of the ocean bottom.

Leitao, C. D.↗
NASA NTRS1974

Methods for investigating the strength characteristics of a lunar soil simulant

A lunar soil simulant was used in research on predicting the performance of the Lunar Roving Vehicle (LRV) on the moon. The simulant was prepared from ground basaltic rock whose grain size distribution was matched to the lunar soil samples collected by Apollo 11 and 12. The strength characteristics of the simulant, i.e., internal friction angle, cohesion, and cone penetration resistance, were tested in triaxial tests, trenching tests, and cone penetration resistance tests. Subsequent soil tests and LRV performance on the moon proved that the lunar soil strength characteristics could be successfully simulated.-

Melzer, K.-J.↗
NASA NTRS1975

A New Current Drogue System for Remotely Monitoring Shelf Current Circulation

The author has identified the following significant results. An ocean current drogue system was developed for use in the coastal zone and continental shelf region. The method features an extremely simple radiosonde device whose position is determined from a pair of cooperative shore stations. These ocean sondes follow the tradition of the atmospheric radiosonde in that they are economically disposable at the end of their mission. The system was successfully tested in a number of environments, including the North Atlantic in two winter coastal storms. Tracking to the edge of the Baltimore and Wilmington trenches was achieved. The drogue system is being used in conjunction with remote sensing aircraft and satellites to chart current circulation at ocean waste disposal sites 40 miles off Delaware's coast.

Klemas, V.↗
NASA NTRS1975

The significance of the Skylab altimeter experiment results and potential applications

The Skylab Altimeter Experiment has proven the capability of the altimeter for measurement of sea surface topography. The geometric determination of the geoid/mean sea level from satellite altimetry is a new approach having significant applications in many disciplines including geodesy and oceanography. A Generalized Least Squares Collocation Technique was developed for determination of the geoid from altimetry data. The technique solves for the altimetry geoid and determines one bias term for the combined effect of sea state, orbit, tides, geoid, and instrument error using sparse ground truth data. The influence of errors in orbit and a priori geoid values are discussed. Although the Skylab altimeter instrument accuracy is about + or - 1 m, significant results were obtained in identification of large geoidal features such as over the Puerto Rico trench. Comparison of the results of several passes shows that good agreement exists between the general slopes of the altimeter geoid and the ground truth, and that the altimeter appears to be capable of providing more details than are now available with best known geoids. The altimetry geoidal profiles show excellent correlations with bathymetry and gravity. Potential applications of altimetry results to geodesy, oceanography, and geophysics are discussed.

Mourad, A. G.↗
NASA NTRS1976

Gravity anomaly detection: Apollo/Soyuz

The Goddard Apollo-Soyuz Geodynamics Experiment is described. It was performed to demonstrate the feasibility of tracking and recovering high frequency components of the earth's gravity field by utilizing a synchronous orbiting tracking station such as ATS-6. Gravity anomalies of 5 MGLS or larger having wavelengths of 300 to 1000 kilometers on the earth's surface are important for geologic studies of the upper layers of the earth's crust. Short wavelength Earth's gravity anomalies were detected from space. Two prime areas of data collection were selected for the experiment: (1) the center of the African continent and (2) the Indian Ocean Depression centered at 5% north latitude and 75% east longitude. Preliminary results show that the detectability objective of the experiment was met in both areas as well as at several additional anomalous areas around the globe. Gravity anomalies of the Karakoram and Himalayan mountain ranges, ocean trenches, as well as the Diamantina Depth, can be seen. Maps outlining the anomalies discovered are shown.

Vonbun, F. O.↗
NASA NTRS1976

Geodynamics experiment MA-128

The Apollo Soyuz Test Project Geodynamics Experiment was performed to assess the feasibility of tracking and recovering high frequency components of the earth gravity field by utilizing a synchronous orbiting tracking station such as Applications Technology Satellite 6. Two prime areas of data collection were selected for this experiment. The first area is the center of the African continent, and the second area is the Indian Ocean depression centered at latitude 5 N and longitude 75 E. Preliminary results show that the detectability objective of the experiment has been achieved in both areas as well as in several additional anomalous areas around the globe. Gravity anomalies of the Karakoram and Himalayan mountain ranges of ocean trenches, and of the Diamantina depth are specific examples.

Vonbun, F. O.↗
NASA NTRS1977

"Solar ponds"

Array uses low-cost materials and heavy construction methods to make collection and storage of solar energy economical on large scale required for commercial operation. Series of long trenches are dug side by side over an area large in comparison to heat diffusivity of soil.

Miller, C. G.↗