Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time resolution data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Policy issues and data communications for NASA earth observation missions until 1985

The series of LANDSAT sensors with the highest potential data rates of the missions were examined. An examination of LANDSAT imagery uses shows that relatively few require transmission of the full resolution data on a repetitive quasi real time basis. Accuracy of global crop size forecasting can possibly be improved through information derived from LANDSAT imagery. A current forecasting experiment uses the imagery for crop area estimation only, yield being derived from other data sources.

Corte, A. B.↗
NASA NTRS1982

Unprecented syntonization and syncronization accuracy via simultaneous viewing with GPS receivers: Construction characteristics of an NBS/GPS receiver

The National Bureau of Standards/Global Positioning System (NBS/GPS) receiver is discussed. It is designed around the concept of obtaining high accuracy, low cost time and frequency comparisons between remote frequency standards and clocks with the intent to aid international time and frequency coordination. Preliminary tests of this comparison technique between Boulder, CO and Washington, D.C indicate the ability to do accurate time transfer to better that 10 ns, and frequency measurements to better than 1 part in 10 to the 14th power. The hardware and software of the receiver is detailed. The receiver is fully automatic with a built-in 0.1 ns resolution time interval counter. A microprocessor does data processing. Satellite signal stabilities are routinely at the 5 ns level for 15 s averages, and the internal receiver stabilities are at the 1 ns level.

Davis, D. D.↗
NASA NTRS1985

Intercomparison of satellite ozone profile measurements

Ozone profile data are intercompared with those from the LIMS and SBUV flown on Nimbus 7, SAGE flown on Atmospheric Explorer Mission 2, and the Ultraviolet and Infrared Spectrometers flown on the SME. Ozone data were derived from the measurements with independently derived processing algorithms. The data cover different time periods and have different spatial and temporal resolutions. The similarities and differences between the individual data sets are determined with effort focused on directly comparing the spacecraft data sets in the form of individual profiles, zonal mean profiles and global analyses. Comparisons with ground data from balloons and Umkehr stations are made.

Fleig, A. J.↗
NASA NTRS1988

MECA Workshop on Atmospheric H2O Observations of Earth and Mars. Physical Processes, Measurements and Interpretations

The workshop was held to discuss a variety of questions related to the detection and cycling of atmospheric water. Among the questions addressed were: what factors govern the storage and exchange of water between planetary surfaces and atmospheres; what instruments are best suited for the measurement and mapping of atmospheric water; do regolith sources and sinks of water have uniquely identifiable column abundance signatures; what degree of time and spatial resolution in column abundance data is necessary to determine dynamic behavior. Of special importance is the question, does the understanding of how atmospheric water is cycled on Earth provide any insights for the interpretation of Mars atmospheric data.

Clifford, Stephen M.↗
NASA NTRS1990

Analysis of diurnal variation of SCu layer using 2 days of CLASS soundings on San Nicolas Island

Sixty-nine soundings were taken at San Nicolas Island during the FIRE marine stratocumulus experiment. The archived thermodynamic data at 5mb vertical resolution were reduced to 25mb vertical resolution by averaging. Ceilometer data showed the time variation of cloud-base. A subset of 20 soundings taken during a 2 day period of light winds were analyzed. The soundings are grouped into 6 hr. averages (with 5 soundings in each category) to examine the diurnal variation of the thermodynamic structure. Consistent with the solar heating during the daytime, cloud-base rises during the daytime hours and the cloud layer thins. The subcloud layer also becomes more stable, suggesting some uncoupling of the cloud layer from the surface.

Betts, Alan K.↗
NASA NTRS1991

Observations of x ray pulsars from the Kvant module

The Roentgen international x ray observatory on the Kvant module of the Mir space station has been successfully operating since the beginning of June 1987. Many x ray sources were observed and among them were several x ray pulsars. Four telescopes mounted on board the Kvant module cover a wide energy range with good timing resolution. Timing analysis of the Kvant module data suffers from the presence of only short continuous intervals of source observations, separated by 90 min gaps (90 min is the orbital period of the Mir space station around the Earth). The presence of 90 min gaps leads to the appearance of beat frequencies v=v sub 0 + or - n/90 min (n = 1, 2, 3). Special analysis was applied to avoid this difficulty. Results are presented of the pulsation period measurements of the x ray pulsars Her X-1, Cen X-3, SMC X-1, Vela X-1, A0535 + 26 by the instruments on board the Kvant module in 1987 to 1989. The values of the periods are reduced to the solar system barycenter and to the binary system barycenter (excluding A0535 + 26).

Gilfanov, M.↗
NASA NTRS1995

A wideband channel model for land mobile satellite systems

A wideband channel model for Land Mobile Satellite (LMS) services is presented which characterizes the time-varying transmission channel between a satellite and a mobile user terminal. The channel model statistic parameters are the results of fitting procedures to measured data. The data used for fitting have a time resolution of 33 ns corresponding to a bandwidth of 30 MHz. Thus, the model is capable to characterize the channel behaviour for a wide range of services e.g., voice transmission, digital audio broadcasting (DAB), and spread spectrum modulation schemes. The model is presented for different environments and scenarios. The model is derived for a quasi-mobile user with hand-held terminal being in two different environments: rural and urban. The parameters needed for the description are (a) the number of echoes, (b) the distribution of the echo power, and (c) the distribution of the echo delay. It is shown that the direct path follows a Rician distribution whereas the reflected paths are Rayleigh/lognormal distributed. The parameters are given for an elevation angle of 25 deg.

Jahn, Axel↗
NASA NTRS2000

An Assessment of Gigabit Ethernet Technology and Its Applications at the NASA Glenn Research Center

This paper describes Gigabit Ethernet and its role in supporting R&D programs at NASA Glenn. These programs require an advanced high-speed network capable of transporting multimedia traffic, including real-time visualization, high- resolution graphics, and scientific data. GigE is a 1 Gbps extension to 10 and 100 Mbps Ethernet. The IEEE 802.3z and 802.3ab standards define the MAC layer and 1000BASE-X and 1000BASE-T physical layer specifications for GigE. GigE switches and buffered distributors support IEEE 802.3x flow control. The paper also compares GigE with ATM in terms of quality of service, data rate, throughput, scalability, interoperability, network management, and cost of ownership.

Bakes, Catherine Murphy↗
NASA NTRSDate not supplied

Building a Real-Time Flood Prediction Model for Improving Early Warning Systems in Ellicott City, Maryland

As flood events in the United States grow in frequency and intensity, the use of applied remote sensing analyses is increasingly necessary for effective flood monitoring and warning systems. The NASA DEVELOP National Program partnered with the local government of Howard County, Maryland, to investigate the use of machine learning for advanced flood risk detection, and to test the feasibility of integrating this approach into the county’s flood early warning system. To strengthen the efforts of the Howard County Office of Emergency Management (OEM), the project developed a statistical model capable of hindcasting the two severe flash flood events that devastated Ellicott City and transitioned to a ‘Long Short-Term Memory’ based sequence-to-sequence deep learning model with 8-hour forecast capability. The team combined data inputs from public sources including river and precipitation gauges, NASA and NOAA Earth observations, and numerical weather model products using scripts written in the Google Colaboratory Python scripting environment. In addition to designing the deep learning architecture, the team trained and tested the model, and evaluated its performance using Nash-Sutcliffe Efficiency. The final product, the Sequentially Trained Real-time EstimAted Model (STREAM) predicts stage height for the Hudson Branch gauge in Ellicott City using data products available in near real-time, including the High-Resolution Rapid Refresh model’s accumulated precipitation forecasts supplemented by stream gauge data from the OEM and the U.S. Geological Survey. STREAM was incorporated into an online dashboard in a user-friendly interface capable of triggering the alarms that initiate emergency response protocols up to 8 hours in advance of a predicted severe flood event. The project demonstrated the potential for the integration of open data and Earth observations into a flood risk forecasting tool capable of informing near real-time decision making.

NASA DEVELOP↗
DOE OSTI2024

Characterization of ORNL PSD ASIC

The performance of the ORNL ASIC and its readout system was tested with pixelated organic scintillators. We use a pixelated trans-Stilbene scintillator array from Inrad Optics and a pixelated organic glass scintillator array developed at Sandia National Laboratories to characterize the energy and timing resolutions and the pulse-shape discrimination (PSD) figure-of-merit (FoM). The results are compared to previous work in which the same metrics were measured on waveforms digitized at 250 MHz with 14-bit resolution. We found that the PSD FoM at 340 keVee of the ASIC configuration compared to waveform data varied with the scintillator type. We measured a PSD FoM of 1.12 ± 0.14 with the ASIC configuration versus 1.39 ± 0.23 with waveform data using the trans-Stilbene array. We measured a PSD FoM of 0.52 ± 0.18 with the ASIC configuration versus 1.25 ± 0.19 with waveform data using the the organic glass scintillator array. The coincidence timing resolution was measured using two 6x6x6 mm 3 cubes of trans-Stilbene. It was measured to be 805 ± 9 ps with the ASIC configuration versus 300 ps on average with waveform data.

42 ENGINEERING↗
DOE OSTI2024

XFEL SASE pulses can enhance time-dependent observables

Abstract X-ray free electron lasers (XFELs) have emerged as powerful sources of short and intense x-ray pulses. We propose a simple and robust procedure which takes advantage of the inherent stochasticity of self-amplified stimulated emission (SASE) pulses to enhance the time-resolution and signal strength of the recorded data. Notably, the proposed method is able to enhance the average signal without knowledge of the signal strength of individual shots. Simple metrics for the probe pulses are introduced, such as an effective pulse duration applicable to SASE pulses characterised in the time domain using e.g. an X-band transverse cavity. The approach is evaluated using simulated and real pulse data in the context of ultrafast electron dynamics in a molecule. Utilising H 2 as a model system, we demonstrate the efficacy of the method theoretically, successfully enhancing the predicted nonresonant ultrafast x-ray scattering signal associated with electron dynamics. The method presented is broadly applicable and offers a general strategy for enhancing time-dependent observables at XFELs.

data analysis↗
NASA NTRS1980

Expanded interleaved solid-state memory for a wide bandwidth transient waveform recorder

An interleaved, solid state expanded memory for a 100 MHz bandwidth waveform recorder is described. The memory development resulted in a significant increase in the storage capacity of a commercially available recorder. The motivation for the memory expansion of the waveform recorder, which is used to support in-flight measurement of the electromagnetic characteristics of lightning discharges, was the need for a significantly longer data window than that provided by the commercially available unit. The expanded recorder provides a data window that is 128 times longer than the commercial unit, while maintaining the same time resolution, by increasing the storage capacity from 1024 to 131 072 data samples. The expanded unit operates at sample periods as small as 10 ns. Sampling once every 10 ns, the commercial unit records for about 10 microseconds before the memory is filled, whereas, the expanded unit records for about 1300 microseconds. A photo of the expanded waveform recorder is shown.

Thomas, R. M., Jr.↗
NASA NTRS2016

National Climate Assessment - Land Data Assimilation System (NCA-LDAS) Data and Services at NASA GES DISC

The National Climate Assessment-Land Data Assimilation System (NCA-LDAS) is an Integrated Terrestrial Water Analysis, and is one of NASAs contributions to the NCA of the United States. The NCA-LDAS has undergone extensive development, including multi-variate assimilation of remotely-sensed water states and anomalies as well as evaluation and verification studies, led by the Goddard Space Flight Centers Hydrological Sciences Laboratory (HSL). The resulting NCA-LDAS data have recently been released to the general public and include those from the Noah land-surface model (LSM) version 3.3 (Noah-3.3) and the Catchment LSM version Fortuna-2.5 (CLSM-F2.5). Standard LSM output variables including soil moistures temperatures, surface fluxes, snow cover depth, groundwater, and runoff are provided, as well as streamflow using a river routing system. The NCA-LDAS data are archived at and distributed by the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC). The data can be accessed via HTTP, OPeNDAP, Mirador search and download, and NASA Earth data Search. To further facilitate access and use, the NCA-LDAS data are integrated into the NASA Giovanni, for quick visualization and analysis, and into the Data Rods system, for retrieval of time series of long time periods. The temporal and spatial resolutions of the NCA-LDAS data are, respectively, daily-averages and 0.125x0.125 degree, covering North America (25N 53N; 125W 67W) and the period January 1979 to December 2015. The data files are in self-describing, machine-independent, CF-compliant netCDF-4 format.

data assimiliation↗
NASA NTRS2011

Online Time Series Analysis of Land Products over Asia Monsoon Region via Giovanni

Time series analysis is critical to the study of land cover/land use changes and climate. Time series studies at local-to-regional scales require higher spatial resolution, such as 1km or less, data. MODIS land products of 250m to 1km resolution enable such studies. However, such MODIS land data files are distributed in 10ox10o tiles, due to large data volumes. Conducting a time series study requires downloading all tiles that include the study area for the time period of interest, and mosaicking the tiles spatially. This can be an extremely time-consuming process. In support of the Monsoon Asia Integrated Regional Study (MAIRS) program, NASA GES DISC (Goddard Earth Sciences Data and Information Services Center) has processed MODIS land products at 1 km resolution over the Asia monsoon region (0o-60oN, 60o-150oE) with a common data structure and format. The processed data have been integrated into the Giovanni system (Goddard Interactive Online Visualization ANd aNalysis Infrastructure) that enables users to explore, analyze, and download data over an area and time period of interest easily. Currently, the following regional MODIS land products are available in Giovanni: 8-day 1km land surface temperature and active fire, monthly 1km vegetation index, and yearly 0.05o, 500m land cover types. More data will be added in the near future. By combining atmospheric and oceanic data products in the Giovanni system, it is possible to do further analyses of environmental and climate changes associated with the land, ocean, and atmosphere. This presentation demonstrates exploring land products in the Giovanni system with sample case scenarios.

Shen, Suhung↗
NASA NTRSDate not supplied

Building a Real-Time Predictive Flood Model for Improving Early Warning Systems in Ellicott City, Maryland

As flood events in the United States grow in frequency and intensity, the use of applied remote sensing analyses is increasingly necessary for effective flood monitoring and warning systems. The NASA DEVELOP National Program partnered with the Howard County government in Maryland to investigate the use of machine learning for advanced flood risk detection, and to test the feasibility of integrating this approach into the county’s flood early warning system. To strengthen the efforts of the Howard County Office of Emergency Management (OEM), the project developed a prediction model capable of hindcasting the two severe flash flood events that devastated Ellicott City, and transitioned to an Long Short-Term Memory (LSTM) based sequence-to-sequence deep learning model with 8-hour forecast capability. The team combined data inputs from public sources including river and precipitation gauges, NASA and NOAA Earth observations, and numerical weather model products using scripts written in the Google Colaboratory Python scripting environment. In addition to designing the deep learning architecture, the team trained and tested the model, and evaluated its performance using the Nash-Sutcliffe Efficiency (NSE). The final product, called the Sequentially Trained Real-time EstimAted Model (STREAM), predicts stage height for the Hudson Branch gauge in Ellicott City using data products available in near real-time, including the High-Resolution Rapid Refresh (HRRR) model’s accumulated precipitation forecasts supplemented by stream gauge data from the OEM and the U.S. Geological Survey. STREAM was incorporated into an online dashboard in a user-friendly interface capable of triggering the alarms that initiate the OEM’s emergency response protocols up to 8 hours in advance of a predicted severe flood event. The project demonstrated the potential for the integration of open data and Earth observations into a flood risk forecasting tool capable of informing near real-time decision making.

Ryan Hammock↗
DOE OSTI2024

Automated Model for Improved Mapping of Country-Scale High-Resolution Coastal Bathymetry

Accurate and up-to-date maps of coastal bathymetry are critical for a variety of sectors from vessel navigation to port construction and are increasingly vital to inform coastal infrastructure management amid accelerating sea-level rise and more frequent and severe storm-surge events. The primary challenges to accurate and efficient bathymetric mapping from optical remote sensing are: accurately modeling light attenuation in both the atmosphere and water column; and inefficient data processing pipelines for highresolution satellite imagery. To address the effects of light attenuation within the water-column we have developed a novel physics-based bathymetry model that accounts for variations in water-column inherent optical properties on a pixel-by-pixel basis in optically-shallow aquatic environments, which represents a major advancement. For applications to satellite imagery, we have developed a software package that automatically applies the robust 6S atmospheric correction algorithm, estimates the bottom depth from the physics-based bathymetry model, which corrects for attenuation by suspended particulate matter and colored dissolved organic matter in the water column on a pixel-by-pixel basis, and leverages highperformance computing for rapid application to region-scale (e.g., CONUS) 2-meter resolution imagery datasets. Our approach is tailored to sensors that collect data at two-meter resolution with high return times for frequent updates. We mapped 591 WorldView satellite images for Florida, North Carolina, and Alaska and validated the maps against LiDAR-derived bathymetry data. Results show median RMSE of 1.75, 1.59, and 2.67 meters, respectively. By combining the strengths of Oak Ridge National Laboratory in high-performance computing and remote-sensing science with the water-column modeling expertise of Scripps Institution of Oceanography we advance the state of bathymetric mapping capability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Observations for Model Intercomparison Project (Obs4MIPs): status for CMIP6

The Observations for Model Intercomparison Project (Obs4MIPs) was initiated in 2010 to facilitate the use of observations in climate model evaluation and research, with a particular target being the Coupled Model Intercomparison Project (CMIP), a major initiative of the World Climate Research Programme (WCRP). To this end, Obs4MIPs (1) targets observed variables that can be compared to CMIP model variables; (2) utilizes dataset formatting specifications and metadata requirements closely aligned with CMIP model output; (3) provides brief technical documentation for each dataset, designed for nonexperts and tailored towards relevance for model evaluation, including information on uncertainty, dataset merits, and limitations; and (4) disseminates the data through the Earth System Grid Federation (ESGF) platforms, making the observations searchable and accessible via the same portals as the model output. Taken together, these characteristics of the organization and structure of obs4MIPs should entice a more diverse community of researchers to engage in the comparison of model output with observations and to contribute to a more comprehensive evaluation of the climate models. At present, the number of obs4MIPs datasets has grown to about 80; many are undergoing updates, with another 20 or so in preparation, and more than 100 are proposed and under consideration. A partial list of current global satellite-based datasets includes humidity and temperature profiles; a wide range of cloud and aerosol observations; ocean surface wind, temperature, height, and sea ice fraction; surface and top-of-atmosphere longwave and shortwave radiation; and ozone (O 3 ), methane (CH 4 ), and carbon dioxide (CO 2 ) products. A partial list of proposed products expected to be useful in analyzing CMIP6 results includes the following: alternative products for the above quantities, additional products for ocean surface flux and chlorophyll products, a number of vegetation products (e.g., FAPAR, LAI, burned area fraction), ice sheet mass and height, carbon monoxide (CO), and nitrogen dioxide (NO 2 ). While most existing obs4MIPs datasets consist of monthly-mean gridded data over the global domain, products with higher time resolution (e.g., daily) and/or regional products are now receiving more attention. Along with an increasing number of datasets, obs4MIPs has implemented a number of capability upgrades including (1) an updated obs4MIPs data specifications document that provides additional search facets and generally improves congruence with CMIP6 specifications for model datasets, (2) a set of six easily understood indicators that help guide users as to a dataset's maturity and suitability for application, and (3) an option to supply supplemental information about a dataset beyond what can be found in the standard metadata. With the maturation of the obs4MIPs framework, the dataset inclusion process, and the dataset formatting guidelines and resources, the scope of the observations being considered is expected to grow to include gridded in situ datasets as well as datasets with a regional focus, and the ultimate intent is to judiciously expand this scope to any observation dataset that has applicability for evaluation of the types of Earth system models used in CMIP.

54 ENVIRONMENTAL SCIENCES↗